summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-06accel/qaic: Add MHI controllerJeffrey Hugo
An AIC100 device contains a MHI interface with a number of different channels for controlling different aspects of the device. The MHI controller works with the MHI bus to enable and drive that interface. AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and expects the MHI bus to manage the process of loading and sending SBL to the device. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-4-git-send-email-quic_jhugo@quicinc.com
2023-04-06accel/qaic: Add uapi and core driver fileJeffrey Hugo
Add the QAIC driver uapi file and core driver file that binds to the PCIe device. The core driver file also creates the accel device and manages all the interconnections between the different parts of the driver. The driver can be built as a module. If so, it will be called "qaic.ko". Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-3-git-send-email-quic_jhugo@quicinc.com
2023-04-06accel/qaic: Add documentation for AIC100 accelerator driverJeffrey Hugo
The Qualcomm Cloud AI 100 (AIC100) device is an Artificial Intelligence accelerator PCIe card. It contains a number of components both in the SoC and on the card which facilitate running workloads: QSM: management processor NSPs: workload compute units DMA Bridge: dedicated data mover for the workloads MHI: multiplexed communication channels DDR: workload storage and memory The Linux kernel driver for AIC100 is called "QAIC" and is located in the accel subsystem. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-2-git-send-email-quic_jhugo@quicinc.com
2023-04-06drm/atomic-helper: Don't set deadline for modesetsDaniel Vetter
If the crtc is being switched on or off then the semantics of computing the timestampe of the next vblank is somewhat ill-defined. And indeed, the code splats with a warning in the timestamp computation code. Specifically it hits the check to make sure that atomic drivers have full set up the timing constants in the drm_vblank structure, and that's just not the case before the crtc is actually on. For robustness it seems best to just not set deadlines for modesets. v2: Also skip on inactive crtc (Ville) Link: https://lore.kernel.org/dri-devel/dfc21f18-7e1e-48f0-c05a-d659b9c90b91@linaro.org/ Fixes: d39e48ca80c0 ("drm/atomic-helper: Set fence deadline for vblank") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # test patch only Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230405133105.947834-1-daniel.vetter@ffwll.ch
2023-04-06drm/scdc-helper: Pimp SCDC debugsVille Syrjälä
Include the device and connector information in the SCDC debugs. Makes it easier to figure out who did what. v2: Rely on connector->ddc (Maxime) Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: intel-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403223652.18848-1-ville.syrjala@linux.intel.com Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Thierry Reding <treding@nvidia.com>
2023-04-05drm/fb-helper: fix input validation gaps in check_varDaniel Vetter
Apparently drivers need to check all this stuff themselves, which for most things makes sense I guess. And for everything else we luck out, because modern distros stopped supporting any other fbdev drivers than drm ones and I really don't want to argue anymore about who needs to check stuff. Therefore fixing all this just for drm fbdev emulation is good enough. Note that var->active is not set or validated. This is just control flow for fbmem.c and needs to be validated in there as needed. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-3-daniel.vetter@ffwll.ch
2023-04-05drm/fb-helper: drop redundant pixclock check from drm_fb_helper_set_par()Daniel Vetter
The fb_check_var hook is supposed to validate all this stuff. Any errors from fb_set_par are considered driver/hw issues and resulting in dmesg warnings. Luckily we do fix up the pixclock already, so this is all fine. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-2-daniel.vetter@ffwll.ch
2023-04-05drm/fb-helper: set x/yres_virtual in drm_fb_helper_check_varDaniel Vetter
Drivers are supposed to fix this up if needed if they don't outright reject it. Uncovered by 6c11df58fd1a ("fbmem: Check virtual screen sizes in fb_set_var()"). Reported-by: syzbot+20dcf81733d43ddff661@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=c5faf983bfa4a607de530cd3bb008888bf06cefc Cc: stable@vger.kernel.org # v5.4+ Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-1-daniel.vetter@ffwll.ch
2023-04-05drm/bridge: ti-sn65dsi86: Allow GPIO operations to sleepAlexander Stein
There is no need to require non-sleeping GPIO access. Silence the WARN_ON() if GPIO is using e.g. I2C expanders. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405135127.769665-1-alexander.stein@ew.tq-group.com
2023-04-05drm/panel-edp: Add AUO NE135FBM-N41 v8.1 panel entryAngeloGioacchino Del Regno
Add a panel entry with delay_200_500_e50 for the AUO NE135FBM-N41 version 8.1, found on a number of ACER laptops, including the Swift 3 (SF313-52, SF313-53), Chromebook Spin 513 (CP513-2H) and others. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405100452.44225-1-angelogioacchino.delregno@collabora.com
2023-04-05drm/bridge: ps8640: Use constant sleep time for polling hpdPin-yen Lin
The default hpd_wait_us in panel_edp.c is 2 seconds. This makes the sleep time in the polling of _ps8640_wait_hpd_asserted become 200ms. Change it to a constant 20ms to speed up the function. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230331030204.1179524-1-treapking@chromium.org
2023-04-05drm/bridge: ti-sn65dsi83: Do not generate HFP/HBP/HSA and EOT packetMarek Vasut
Do not generate the HS front and back porch gaps, the HSA gap and EOT packet, as per "SN65DSI83 datasheet SLLSEC1I - SEPTEMBER 2012 - REVISED OCTOBER 2020", page 22, these packets are not required. This makes the TI SN65DSI83 bridge work with Samsung DSIM on i.MX8MN. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230403190242.224490-1-marex@denx.de
2023-04-05drm: bridge: ldb: add support for using channel 1 onlyLuca Ceresoli
The LDB driver currently checks whether dual mode is used, otherwise it assumes only channel 0 is in use. Add support for using only channel 1. In device tree terms, this means linking port 2 only. Doing this cleanly requires changing the logic of the probe functions from this: 1. use of_graph_get_remote_node() on port 1 to find the panel 2. use drm_of_lvds_get_dual_link_pixel_order() to detect dual mode to this: 1. use of_graph_get_remote_node() twice to find remote ports 2. reuse the result of the above to know whether each channel is enabled and to find the panel 3. if (both channels as enabled) use drm_of_lvds_get_dual_link_pixel_order() to detect dual mode Also add a dev_dbg() to log the detected mode and log an error in case no panel was found (no channel enabled). Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405081058.2347130-2-luca.ceresoli@bootlin.com
2023-04-05drm: bridge: ldb: add missing \n in dev_warn() stringLuca Ceresoli
dev_warn() and similar require a training \n. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405081058.2347130-1-luca.ceresoli@bootlin.com
2023-04-05drm/bridge: ti-sn65dsi83: use dev_err_probe if host attach failedAlexander Stein
There might be cases where the host attach is deferred, use dev_err_probe to add more detailed information to /sys/kernel/debug/devices_deferred. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405075223.579461-1-alexander.stein@ew.tq-group.com
2023-04-05accel/ivpu: Remove D3hot delay for MeteorlakeKarol Wachowski
VPU on MTL has hardware optimizations and does not require 10ms D0 - D3hot transition delay imposed by PCI specification (PCIe r6.0, sec 5.9.) . The delay removal is traditionally done by adding PCI ID to quirk_remove_d3hot_delay() in drivers/pci/quirks.c . But since we do not need that optimization before driver probe and we can better specify in the ivpu driver on what (future) hardware use the optimization, we do not use quirk_remove_d3hot_delay() for that. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403121545.2995279-1-stanislaw.gruszka@linux.intel.com
2023-04-05Revert "drm/lima: add usage counting method to ctx_mgr"Qiang Yu
This reverts commit bccafec957a5c4b22ac29e53a39e82d0a0008348. This is due to the depend commit has been reverted on upstream: commit baad10973fdb ("Revert "drm/scheduler: track GPU active time per entity"") Acked-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404002601.24136-4-yq882255@163.com
2023-04-05Revert "drm/lima: allocate unique id per drm_file"Qiang Yu
This reverts commit 87767de835edf527b879a363d518c33da68adb81. This is due to the depend commit has been reverted on upstream: commit baad10973fdb ("Revert "drm/scheduler: track GPU active time per entity"") Acked-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404002601.24136-3-yq882255@163.com
2023-04-05Revert "drm/lima: add show_fdinfo for drm usage stats"Qiang Yu
This reverts commit 4a66f3da99dcb4dcbd28544110636b50adfb0f0d. This is due to the depend commit has been reverted on upstream: commit baad10973fdb ("Revert "drm/scheduler: track GPU active time per entity"") Acked-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404002601.24136-2-yq882255@163.com
2023-04-04drm/vblank: Fix for drivers that do not drm_vblank_init()Rob Clark
This should fix a crash that was reported on ast (and possibly other drivers which do not initialize vblank). fbcon: Taking over console Unable to handle kernel NULL pointer dereference at virtual address 0000000000000074 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000080009d16000 [0000000000000074] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: ip6table_nat tun nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables nfnetlink qrtr sunrpc binfmt_misc vfat fat xfs snd_usb_audio snd_hwdep snd_usbmidi_lib snd_seq snd_pcm snd_rawmidi snd_timer snd_seq_device snd soundcore joydev mc ipmi_ssif ipmi_devintf ipmi_msghandler arm_spe_pmu arm_cmn arm_dsu_pmu arm_dmc620_pmu cppc_cpufreq loop zram crct10dif_ce polyval_ce nvme polyval_generic ghash_ce sbsa_gwdt igb nvme_core ast nvme_common i2c_algo_bit xgene_hwmon gpio_dwapb scsi_dh_rdac scsi_dh_emc scsi_dh_alua ip6_tables ip_tables dm_multipath fuse CPU: 12 PID: 469 Comm: kworker/12:1 Not tainted 6.3.0-rc2-00008-gd39e48ca80c0 #1 Hardware name: ADLINK AVA Developer Platform/AVA Developer Platform, BIOS TianoCore 2.04.100.07 (SYS: 2.06.20220308) 09/08/2022 Workqueue: events fbcon_register_existing_fbs pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_crtc_next_vblank_start+0x2c/0x98 lr : drm_atomic_helper_wait_for_fences+0x90/0x240 sp : ffff80000d583960 x29: ffff80000d583960 x28: ffff07ff8fc187b0 x27: 0000000000000000 x26: ffff07ff99c08c00 x25: 0000000000000038 x24: ffff07ff99c0c000 x23: 0000000000000001 x22: 0000000000000038 x21: 0000000000000000 x20: ffff07ff9640a280 x19: 0000000000000000 x18: ffffffffffffffff x17: 0000000000000000 x16: ffffb24d2eece1c0 x15: 0000003038303178 x14: 3032393100000048 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffb24d2eeeaca0 x8 : ffff80000d583628 x7 : 0000080077783000 x6 : 0000000000000000 x5 : ffff80000d584000 x4 : ffff07ff99c0c000 x3 : 0000000000000130 x2 : 0000000000000000 x1 : ffff80000d5839c0 x0 : ffff07ff99c0cc08 Call trace: drm_crtc_next_vblank_start+0x2c/0x98 drm_atomic_helper_wait_for_fences+0x90/0x240 drm_atomic_helper_commit+0xb0/0x188 drm_atomic_commit+0xb0/0xf0 drm_client_modeset_commit_atomic+0x218/0x280 drm_client_modeset_commit_locked+0x64/0x1a0 drm_client_modeset_commit+0x38/0x68 __drm_fb_helper_restore_fbdev_mode_unlocked+0xb0/0xf8 drm_fb_helper_set_par+0x44/0x88 fbcon_init+0x1e0/0x4a8 visual_init+0xbc/0x118 do_bind_con_driver.isra.0+0x194/0x3a0 do_take_over_console+0x50/0x70 do_fbcon_takeover+0x74/0xf8 do_fb_registered+0x13c/0x158 fbcon_register_existing_fbs+0x78/0xc0 process_one_work+0x1ec/0x478 worker_thread+0x74/0x418 kthread+0xec/0x100 ret_from_fork+0x10/0x20 Code: f9400004 b9409013 f940a082 9ba30a73 (b9407662) ---[ end trace 0000000000000000 ]--- v2: Use drm_dev_has_vblank() Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: d39e48ca80c0 ("drm/atomic-helper: Set fence deadline for vblank") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230403160314.1210533-1-robdclark@gmail.com
2023-04-04fbdev/radeon: use pci aperture helpersDaniel Vetter
It's not exactly the same since the open coded version doesn't set primary correctly. But that's a bugfix, so shouldn't hurt really. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-fbdev@vger.kernel.org Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230111154112.90575-7-daniel.vetter@ffwll.ch
2023-04-04staging/lynxfb: Use pci aperture helperDaniel Vetter
It exists! Note that since this is an exact copy, there shouldn't be any functional difference here. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: linux-fbdev@vger.kernel.org Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230111154112.90575-6-daniel.vetter@ffwll.ch
2023-04-04drm/ast: Use drm_aperture_remove_conflicting_pci_framebuffersDaniel Vetter
It's just open coded and matches. Note that Thomas said that his version apparently failed for some reason, but hey maybe we should try again. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Tested-by: Thomas Zimmmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230111154112.90575-1-daniel.vetter@ffwll.ch
2023-04-04video/aperture: Fix typos in commentsSui Jingfeng
EFI FB, VESA FB or VGA FB etc belong to firmware based framebuffer driver. Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404040101.2165600-1-suijingfeng@loongson.cn
2023-04-03dt-bindings: display: Start the info graphics with HS/VS changeMarek Vasut
The VS signal change is synchronized to HS signal change, start the info graphics with that event, instead of having that event occur in the middle of it. Scope trace of DPI bus with HS/VS active HIGH looks as follows: ________________...__ VS...___/__ __ \______... HS...___/ \_______/ \__...__/ \___... ^ ^ | | | Used to start here -' | '--- Start info graphics here Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230221200407.16531-1-marex@denx.de
2023-04-03drm/bridge: tc358767: Enable DSI burst mode, LPM, non-continuous clockMarek Vasut
The TC358767/TC358867/TC9595 are capable of DSI burst mode, which is more energy efficient than the non-burst modes. Make use of it. The TC358767/TC358867/TC9595 are capable of DSI non-continuous clock, since it sources the internal PLL clock from external clock source. The DSI non-continuous clock further reduces power utilization. The TC358767/TC358867/TC9595 may use DSI LPM for command transmissions, make sure this is configured correctly in the DSI mode flags. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221016003632.406468-1-marex@denx.de
2023-04-03drm/vram-helper: turn on PRIME import/exportSimon Ser
We don't populate drm_driver.gem_prime_import_sg_table so only DMA-BUFs exported from our own device can be imported. We don't populate drm_gem_object_funcs.get_sg_table so DMA-BUFs cannot be imported into another device. Still, this is useful to user-space to share buffers between processes and between API boundaries (e.g. wlroots hard-requires PRIME import/export support). v2: expand commit message Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302143502.500661-2-contact@emersion.fr
2023-04-03drm/prime: reject DMA-BUF attach when get_sg_table is missingSimon Ser
drm_gem_map_dma_buf() requires drm_gem_object_funcs.get_sg_table to be implemented, or else WARNs. Allow drivers to leave this hook unimplemented to implement purely local DMA-BUFs (ie, DMA-BUFs which cannot be imported anywhere else but the device which allocated them). In that case, reject imports to other devices in drm_gem_map_attach(). v2: new patch v3: use ENOSYS Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302143502.500661-1-contact@emersion.fr
2023-04-03drm/bridge: lt8912b: Fix DSI Video ModeFrancesco Dolcini
LT8912 DSI port supports only Non-Burst mode video operation with Sync Events and continuous clock on clock lane, correct dsi mode flags according to that removing MIPI_DSI_MODE_VIDEO_BURST flag. Cc: <stable@vger.kernel.org> Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230330093131.424828-1-francesco@dolcini.it
2023-04-02drm/lima: add show_fdinfo for drm usage statsErico Nunes
This exposes an accumulated active time per client via the fdinfo infrastructure per execution engine, following Documentation/gpu/drm-usage-stats.rst. In lima, the exposed execution engines are gp and pp. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230312233052.21095-4-nunes.erico@gmail.com
2023-04-02drm/lima: allocate unique id per drm_fileErico Nunes
To track if fds are pointing to the same execution context and export the expected information to fdinfo, similar to what is done in other drivers. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230312233052.21095-3-nunes.erico@gmail.com
2023-04-02drm/lima: add usage counting method to ctx_mgrErico Nunes
lima maintains a context manager per drm_file, similar to amdgpu. In order to account for the complete usage per drm_file, all of the associated contexts need to be considered. Previously released contexts also need to be accounted for but their drm_sched_entity info is gone once they get released, so account for it in the ctx_mgr. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230312233052.21095-2-nunes.erico@gmail.com
2023-04-02drm/lima/lima_drv: Add missing unwind goto in lima_pdev_probe()Harshit Mogalapalli
Smatch reports: drivers/gpu/drm/lima/lima_drv.c:396 lima_pdev_probe() warn: missing unwind goto? Store return value in err and goto 'err_out0' which has lima_sched_slab_fini() before returning. Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314052711.4061652-1-harshit.m.mogalapalli@oracle.com
2023-03-31dt-bindings: display: sitronix,st7701: document port and rotationKrzysztof Kozlowski
Panels are supposed to have one port (defined in panel-common.yaml binding) and can have also rotation: rk3326-odroid-go3.dtb: panel@0: 'port', 'rotation' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20230326204224.80181-4-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-31dt-bindings: display: elida,kd35t133: document port and rotationKrzysztof Kozlowski
Panels are supposed to have one port (defined in panel-common.yaml binding) and can have also rotation: rk3326-odroid-go2.dtb: panel@0: 'port', 'rotation' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20230326204224.80181-3-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-31dt-bindings: display: feiyang,fy07024di26a30d: document portKrzysztof Kozlowski
Panels are supposed to have one port (defined in panel-common.yaml binding): rk3399-rockpro64.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326204224.80181-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-31dt-bindings: display: xinpeng,xpp055c272: document portKrzysztof Kozlowski
Panels are supposed to have one port (defined in panel-common.yaml binding): px30-evb.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326204224.80181-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-31dt-bindings: display: sitronix,st7789v: document dc-gpiosKrzysztof Kozlowski
The device comes with DCX pin which is already used in canaan/sipeed_maixduino.dts (although not in Linux driver). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326164700.104570-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-31drm/panfrost: Add basic support for speed binningAngeloGioacchino Del Regno
Some SoCs implementing ARM Mali GPUs are subject to speed binning: this means that some versions of the same SoC model may need to be limited to a slower frequency compared to the other: this is being addressed by reading nvmem (usually, an eFuse array) containing a number that identifies the speed binning of the chip, which is usually related to silicon quality. To address such situation, add basic support for reading the speed-bin through nvmem, as to make it possible to specify the supported hardware in the OPP table for GPUs. This commit also keeps compatibility with any platform that does not specify (and does not even support) speed-binning. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323090822.61766-3-angelogioacchino.delregno@collabora.com
2023-03-31dt-bindings: gpu: mali-bifrost: Document nvmem for speedbin supportAngeloGioacchino Del Regno
Some SoCs implementing ARM Mali GPUs may be subject to speed binning and the usable bin is read from nvmem: document the addition of nvmem and nvmem-cells for 'speed-bin'. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323090822.61766-2-angelogioacchino.delregno@collabora.com
2023-03-30drm: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20230310144706.1542295-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-30dt-bindings: display: seiko,43wvf1g: Change the maintainer's contactFabio Estevam
Marco's NXP email is no longer valid. Marco told me offline that he has no interest to be listed as the maintainer contact for this binding, so add my contact. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230329201150.741106-1-festevam@gmail.com
2023-03-30Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
Backmerge to get rc4. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2023-03-29dt-bindings: display: boe,tv101wum-nl6: document rotationKrzysztof Kozlowski
Allow 'rotation' property (coming from panel-common.yaml) already used in DTS: sc7180-trogdor-quackingstick-r0.dtb: panel@0: 'rotation' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326155425.91181-6-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-29dt-bindings: display: visionox,rm69299: document regKrzysztof Kozlowski
Panels are supposed to have one reg. This fixes dtbs_check warnings like: sc7180-idp.dtb: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326155425.91181-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-29dt-bindings: display: panel-simple-dsi: document portKrzysztof Kozlowski
Panels are supposed to have one port (coming from panel-common.yaml binding): msm8916-samsung-a3u-eur.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326155425.91181-4-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-29dt-bindings: display: panel-simple-dsi: allow vddio variantKrzysztof Kozlowski
Few panels like Samsung s6e3fc2x01 and sofef00 use vddio-supply instead of power-supply (in DTS and Linux driver), so allow it to fix: sdm845-oneplus-enchilada.dtb: panel@0: 'power-supply' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326155425.91181-3-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-29dt-bindings: display: novatek,nt36672a: correct VDDIO supplyKrzysztof Kozlowski
The nt36672a bindings were added with a mistake on VDDIO supply calling it in one place vddio and in other vddi0. Typical name is rather vddio which is also now used by DTS (sdm845-xiaomi-beryllium-common.dtsi) and Linux driver. Fixes: c2abcf30efb8 ("dt-bindings: display: novatek,nt36672a: Fix unevaluated properties warning") Fixes: 9528a02430df ("dt-bindings: display: panel: Add bindings for Novatek nt36672a") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326155425.91181-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-29dt-bindings: display: panel-simple: merge Innolux p120zdg-bf1Krzysztof Kozlowski
There is nothing special in Innolux p120zdg-bf1 panel, so just like other Innolux panels it can be made part of panel-simple. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326155425.91181-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-29Merge v6.3-rc4 into drm-nextDaniel Vetter
I just landed the fence deadline PR from Rob that a bunch of drivers want/need to apply driver-specific patches. Backmerge -rc4 so that they don't have to be stuck on -rc2 for no reason at all. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit (git 2.34.1) at 2025-07-15 22:03:20 +0000