summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-15bpf: Clear subreg_def for global function return valuesIlya Leoshkevich
test_global_func4 fails on s390 as reported by Yauheni in [1]. The immediate problem is that the zext code includes the instruction, whose result needs to be zero-extended, into the zero-extension patchlet, and if this instruction happens to be a branch, then its delta is not adjusted. As a result, the verifier rejects the program later. However, according to [2], as far as the verifier's algorithm is concerned and as specified by the insn_no_def() function, branching insns do not define anything. This includes call insns, even though one might argue that they define %r0. This means that the real problem is that zero extension kicks in at all. This happens because clear_caller_saved_regs() sets BPF_REG_0's subreg_def after global function calls. This can be fixed in many ways; this patch mimics what helper function call handling already does. [1] https://lore.kernel.org/bpf/20200903140542.156624-1-yauheni.kaliuta@redhat.com/ [2] https://lore.kernel.org/bpf/CAADnVQ+2RPKcftZw8d+B1UwB35cpBhpF5u3OocNh90D9pETPwg@mail.gmail.com/ Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification") Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210212040408.90109-1-iii@linux.ibm.com
2021-02-15net: mvpp2: Add TX flow control support for jumbo framesStefan Chulski
With MTU less than 1500B on all ports, the driver uses per CPU pool mode. If one of the ports set to jumbo frame MTU size, all ports move to shared pools mode. Here, buffer manager TX Flow Control reconfigured on all ports. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: mvpp2: reduce tx-fifo for loopback portStefan Chulski
1KB is enough for loopback port, so 2KB can be distributed between other ports. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: dsa: sja1105: make devlink property best_effort_vlan_filtering true by ↵Vladimir Oltean
default The sja1105 driver has a limitation, extensively described under Documentation/networking/dsa/sja1105.rst and Documentation/networking/devlink/sja1105.rst, which says that when the ports are under a bridge with vlan_filtering=1, traffic to and from the network stack is not possible, unless the driver-specific best_effort_vlan_filtering devlink parameter is enabled. For users, this creates a 'wtf' moment. They need to go to the documentation and find about the existence of this property, then maybe install devlink and set it to true. Having best_effort_vlan_filtering enabled by the kernel by default delays that 'wtf' moment (maybe up to the point that it never even happens). The user doesn't need to care that the driver supports addressing the ports individually by retagging VLAN IDs until he/she needs to use more than 32 VLAN IDs (since there can be at most 32 retagging rules). Only then do they need to think whether they need the full VLAN table, at the expense of no individual port addressing, or not. But the odds that an sja1105 user will need more than 32 VLANs terminated by the CPU is probably low. And, if we were to follow the principle that more advanced use cases should require more advanced preparation steps, then it makes more sense for ping to 'just work' while CPU termination of > 32 VLAN IDs to require a bit more forethought and possibly a driver-specific devlink param. So we should be able to safely change the default here, and make this driver act just a little bit more sanely out of the box. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: caif: Use netif_rx_any_context().Sebastian Andrzej Siewior
The usage of in_interrupt() in non-core code is phased out. Ideally the information of the calling context should be passed by the callers or the functions be split as appropriate. The attempt to consolidate the code by passing an arguemnt or by distangling it failed due lack of knowledge about this driver and because the call chains are hard to follow. As a stop gap use netif_rx_any_context() which invokes the correct code path depending on context and confines the in_interrupt() usage to core code. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15tcp: tcp_data_ready() must look at SOCK_DONEEric Dumazet
My prior cleanup missed that tcp_data_ready() has to look at SOCK_DONE. Otherwise, an application using SO_RCVLOWAT will not get EPOLLIN event if a FIN is received in the middle of expected payload. The reason SOCK_DONE is not examined in tcp_epollin_ready() is that tcp_poll() catches the FIN because tcp_fin() is also setting RCV_SHUTDOWN into sk->sk_shutdown Fixes: 05dc72aba364 ("tcp: factorize logic into tcp_epollin_ready()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Arjun Roy <arjunroy@google.com> Reviewed-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15Merge branch 'br-next-fixes'David S. Miller
Vladimir Oltean says: ==================== Fix buggy brport flags offload for SJA1105 DSA While testing the "Software fallback for bridging in DSA" on sja1105, I discovered that I managed to introduce two bugs in a single patch submitted recently to net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: bridge: fix br_vlan_filter_toggle stub when CONFIG_BRIDGE_VLAN_FILTERING=nVladimir Oltean
The prototype of br_vlan_filter_toggle was updated to include a netlink extack, but the stub definition wasn't, which results in a build error when CONFIG_BRIDGE_VLAN_FILTERING=n. Fixes: 9e781401cbfc ("net: bridge: propagate extack through store_bridge_parm") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: bridge: fix switchdev_port_attr_set stub when CONFIG_SWITCHDEV=nVladimir Oltean
The switchdev_port_attr_set function prototype was updated only for the case where CONFIG_SWITCHDEV=y|m, leaving a prototype mismatch with the stub definition for the disabled case. This results in a build error, so update that function too. Fixes: dcbdf1350e33 ("net: bridge: propagate extack through switchdev_port_attr_set") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: wan/lmc: dont print format string when not availableTong Zhang
dev->name is determined only after calling register_hdlc_device(), however ,it is used by printk before the name is fully determined. [ 4.565137] hdlc%d: detected at e8000000, irq 11 Instead of printing out a %d, print hdlc directly Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: wan/lmc: unregister device when no matching device is foundTong Zhang
lmc set sc->lmc_media pointer when there is a matching device. However, when no matching device is found, this pointer is NULL and the following dereference will result in a null-ptr-deref. To fix this issue, unregister the hdlc device and return an error. [ 4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95 [ 4.570102] [ 4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 #94 [ 4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4 [ 4.571125] Call Trace: [ 4.571261] dump_stack+0x7d/0xa3 [ 4.571445] kasan_report.cold+0x10c/0x10e [ 4.571667] ? lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.571932] lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.572186] ? lmc_mii_readreg+0xa0/0xa0 [lmc] [ 4.572432] local_pci_probe+0x6f/0xb0 [ 4.572639] pci_device_probe+0x171/0x240 [ 4.572857] ? pci_device_remove+0xe0/0xe0 [ 4.573080] ? kernfs_create_link+0xb6/0x110 [ 4.573315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.573598] really_probe+0x161/0x420 [ 4.573799] driver_probe_device+0x6d/0xd0 [ 4.574022] device_driver_attach+0x82/0x90 [ 4.574249] ? device_driver_attach+0x90/0x90 [ 4.574485] __driver_attach+0x60/0x100 [ 4.574694] ? device_driver_attach+0x90/0x90 [ 4.574931] bus_for_each_dev+0xe1/0x140 [ 4.575146] ? subsys_dev_iter_exit+0x10/0x10 [ 4.575387] ? klist_node_init+0x61/0x80 [ 4.575602] bus_add_driver+0x254/0x2a0 [ 4.575812] driver_register+0xd3/0x150 [ 4.576021] ? 0xffffffffc0018000 [ 4.576202] do_one_initcall+0x84/0x250 [ 4.576411] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.576733] ? unpoison_range+0xf/0x30 [ 4.576938] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.577219] ? unpoison_range+0xf/0x30 [ 4.577423] ? unpoison_range+0xf/0x30 [ 4.577628] do_init_module+0xf8/0x350 [ 4.577833] load_module+0x3fe6/0x4340 [ 4.578038] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.578247] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.578526] ? module_frob_arch_sections+0x20/0x20 [ 4.578787] ? __do_sys_finit_module+0x108/0x170 [ 4.579037] __do_sys_finit_module+0x108/0x170 [ 4.579278] ? __ia32_sys_init_module+0x40/0x40 [ 4.579523] ? file_open_root+0x200/0x200 [ 4.579742] ? do_sys_open+0x85/0xe0 [ 4.579938] ? filp_open+0x50/0x50 [ 4.580125] ? exit_to_user_mode_prepare+0xfc/0x130 [ 4.580390] do_syscall_64+0x33/0x40 [ 4.580586] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.580859] RIP: 0033:0x7f1a724c3cf7 [ 4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891 [ 4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7 [ 4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003 [ 4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0 [ 4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001 [ 4.584349] ================================================================== Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: mscc: ocelot: avoid type promotion when calling ocelot_ifh_set_destVladimir Oltean
Smatch is confused by the fact that a 32-bit BIT(port) macro is passed as argument to the ocelot_ifh_set_dest function and warns: ocelot_xmit() warn: should '(((1))) << (dp->index)' be a 64 bit type? seville_xmit() warn: should '(((1))) << (dp->index)' be a 64 bit type? The destination port mask is copied into a 12-bit field of the packet, starting at bit offset 67 and ending at 56. So this DSA tagging protocol supports at most 12 bits, which is clearly less than 32. Attempting to send to a port number > 12 will cause the packing() call to truncate way before there will be 32-bit truncation due to type promotion of the BIT(port) argument towards u64. Therefore, smatch's fears that BIT(port) will do the wrong thing and cause unexpected truncation for "port" values >= 32 are unfounded. Nonetheless, let's silence the warning by explicitly passing an u64 value to ocelot_ifh_set_dest, such that the compiler does not need to do a questionable type promotion. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15b43: N-PHY: Fix the update of coef for the PHY revision >= 3caseColin Ian King
The documentation for the PHY update [1] states: Loop 4 times with index i If PHY Revision >= 3 Copy table[i] to coef[i] Otherwise Set coef[i] to 0 the copy of the table to coef is currently implemented the wrong way around, table is being updated from uninitialized values in coeff. Fix this by swapping the assignment around. [1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/ Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration") Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15cxgb4/chtls/cxgbit: Keeping the max ofld immediate data size same in cxgb4 ↵Ayush Sawal
and ulds The Max imm data size in cxgb4 is not similar to the max imm data size in the chtls. This caused an mismatch in output of is_ofld_imm() of cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN. As cxgb4's max imm. data value for ofld packets is changed to MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also. Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15atm: idt77252: fix build broken on amd64Tong Zhang
idt77252 is broken and wont load on amd64 systems modprobe idt77252 shows the following idt77252_init: skb->cb is too small (48 < 56) Add packed attribute to struct idt77252_skb_prv and struct atm_skb_data so that the total size can be <= sizeof(skb->cb) Also convert runtime size check to buildtime size check in idt77252_init() Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15r8169: fix resuming from suspend on RTL8105e if machine runs on batteryHeiner Kallweit
Armin reported that after referenced commit his RTL8105e is dead when resuming from suspend and machine runs on battery. This patch has been confirmed to fix the issue. Fixes: e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions") Reported-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15thermal: qcom: add support for adc-tm5 PMIC thermal monitorDmitry Baryshkov
Add support for Thermal Monitoring part of PMIC5. This part is closely coupled with ADC, using it's channels directly. ADC-TM support generating interrupts on ADC value crossing low or high voltage bounds, which is used to support thermal trip points. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205000118.493610-3-dmitry.baryshkov@linaro.org
2021-02-15dt-bindings: thermal: qcom: add adc-thermal monitor bindingsDmitry Baryshkov
Add bindings for thermal monitor, part of Qualcomm PMIC5 chips. It is a close counterpart of VADC part of those PMICs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205000118.493610-2-dmitry.baryshkov@linaro.org
2021-02-15Merge remote-tracking branch 'iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1' ↵Daniel Lezcano
into testing
2021-02-15ASoC: soc-pcm: fix hwparams min/max init for dpcmKai Vehmanen
When runtime is initialized with dpcm_init_runtime_hw(), some of the min/max calculations assume that defaults are set. For example calculation of channel min/max values may be done using zero-initialized data and soc_pcm_hw_update_chan() will always return max-channels of 0 in this case. This will result in failure to open the PCM at all. Fix the issue by calling soc_pcm_hw_init() before calling any soc_pcm_hw_update_*() functions. Remove the conditional code on runtime->hw.formats as this field is anyways set in soc_pcm_hw_init(). Fixes: 6cb56a4549e9 ("ASoC: soc-pcm: add soc_pcm_hw_update_chan()") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210214220414.2876690-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-15thermal: ti-soc-thermal: Use non-inverted define for omap4Tony Lindgren
When we set bit 10 high we use continuous mode and not single mode. Let's correct this to avoid confusion. No functional changes here, the code does the right thing with bit 10. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-5-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Simplify polling with iopollTony Lindgren
We can use iopoll for checking the EOCZ (end of conversion) bit. And with this we now also want to handle the timeout errors properly. For omap3, we need about 1.2ms for the single mode sampling to wait for EOCZ down, so let's use 1.5ms timeout there. Waiting for sampling to start is faster and we can use 1ms timeout. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-4-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430Tony Lindgren
At least for 4430, trying to use the single conversion mode eventually hangs the thermal sensor. This can be quite easily seen with errors: thermal thermal_zone0: failed to read out thermal zone (-5) Also, trying to read the temperature shows a stuck value with: $ while true; do cat /sys/class/thermal/thermal_zone0/temp; done Where the temperature is not rising at all with the busy loop. Additionally, the EOCZ (end of conversion) bit is not rising on 4430 in single conversion mode while it works fine in continuous conversion mode. It is also possible that the hung temperature sensor can affect the thermal shutdown alert too. Let's fix the issue by adding TI_BANDGAP_FEATURE_CONT_MODE_ONLY flag and use it for 4430. Note that we also need to add udelay to for the EOCZ (end of conversion) bit polling as otherwise we have it time out too early on 4430. We'll be changing the loop to use iopoll in the following clean-up patch. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-3-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Skip pointless register access for dra7Tony Lindgren
On dra7, there is no Start of Conversion (SOC) register bit and we have an empty bgap_soc_mask in the configuration for the thermal driver. Let's not do pointless reads and writes with the empty mask. There's also no point waiting for End of Conversion bit (EOCZ) to go high on dra7. We only care about it going down, and are now mostly timing out waiting for EOCZ high while it has already gone down. When we add checking for the timeout errors in a later patch, waiting for EOCZ high would cause bogus time out errors. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-2-tony@atomide.com
2021-02-15proc: don't allow async path resolution of /proc/thread-self componentsJens Axboe
If this is attempted by an io-wq kthread, then return -EOPNOTSUPP as we don't currently support that. Once we can get task_pid_ptr() doing the right thing, then this can go away again. Use PF_IO_WORKER for this to speciically target the io_uring workers. Modify the /proc/self/ check to use PF_IO_WORKER as well. Cc: stable@vger.kernel.org Fixes: 8d4c3e76e3be ("proc: don't allow async path resolution of /proc/self components") Reported-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-15Merge branches 'powercap' and 'pm-misc'Rafael J. Wysocki
* powercap: powercap: intel_rapl: Use topology interface in rapl_init_domains() powercap: intel_rapl: Use topology interface in rapl_add_package() powercap/intel_rapl: add support for AlderLake Mobile powercap/drivers/dtpm: Fix size of object being allocated powercap/drivers/dtpm: Fix an IS_ERR() vs NULL check powercap/drivers/dtpm: Fix some missing unlock bugs powercap/drivers/dtpm: Fix a double shift bug powercap/drivers/dtpm: Fix __udivdi3 and __aeabi_uldivmod unresolved symbols powercap/drivers/dtpm: Add CPU energy model based support powercap/drivers/dtpm: Add API for dynamic thermal power management Documentation/powercap/dtpm: Add documentation for dtpm units: Add Watt units * pm-misc: PM: Kconfig: remove unneeded "default n" options PM: EM: update Kconfig description and drop "default n" option
2021-02-15binfmt_misc: pass binfmt_misc flags to the interpreterLaurent Vivier
It can be useful to the interpreter to know which flags are in use. For instance, knowing if the preserve-argv[0] is in use would allow to skip the pathname argument. This patch uses an unused auxiliary vector, AT_FLAGS, to add a flag to inform interpreter if the preserve-argv[0] is enabled. Note by Helge Deller: The real-world user of this patch is qemu-user, which needs to know if it has to preserve the argv[0]. See Debian bug #970460. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: YunQiang Su <ysu@wavecomp.com> URL: http://bugs.debian.org/970460 Signed-off-by: Helge Deller <deller@gmx.de>
2021-02-15netfilter: nftables: introduce table ownershipPablo Neira Ayuso
A userspace daemon like firewalld might need to monitor for netlink updates to detect its ruleset removal by the (global) flush ruleset command to ensure ruleset persistency. This adds extra complexity from userspace and, for some little time, the firewall policy is not in place. This patch adds the NFT_TABLE_F_OWNER flag which allows a userspace program to own the table that creates in exclusivity. Tables that are owned... - can only be updated and removed by the owner, non-owners hit EPERM if they try to update it or remove it. - are destroyed when the owner closes the netlink socket or the process is gone (implicit netlink socket closure). - are skipped by the global flush ruleset command. - are listed in the global ruleset. The userspace process that sets on the NFT_TABLE_F_OWNER flag need to leave open the netlink socket. A new NFTA_TABLE_OWNER netlink attribute specifies the netlink port ID to identify the owner from userspace. This patch also updates error reporting when an unknown table flag is specified to change it from EINVAL to EOPNOTSUPP given that EINVAL is usually reserved to report for malformed netlink messages to userspace. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-15netfilter: nftables: add helper function to release hooks of one single tablePablo Neira Ayuso
Add a function to release the hooks of one single table. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-15netfilter: nftables: add helper function to release one tablePablo Neira Ayuso
Add a function to release one table. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-15Merge branch 'acpi-messages'Rafael J. Wysocki
* acpi-messages: ACPI: OSL: Clean up printing messages ACPI: OSL: Rework acpi_check_resource_conflict() ACPI: thermal: Clean up printing messages ACPI: video: Clean up printing messages ACPI: button: Clean up printing messages ACPI: battery: Clean up printing messages ACPI: AC: Clean up printing messages ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more ACPI: utils: Clean up printing messages ACPI: scan: Clean up printing messages ACPI: bus: Clean up printing messages ACPI: PM: Clean up printing messages ACPI: power: Clean up printing messages
2021-02-15Merge branches 'acpi-misc', 'acpi-cppc', 'acpi-docs', 'acpi-config' and ↵Rafael J. Wysocki
'acpi-apei' * acpi-misc: ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILURE ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros * acpi-cppc: ACPI: CPPC: initialise vaddr pointers to NULL ACPI: CPPC: add __iomem annotation to generic_comm_base pointer ACPI: CPPC: remove __iomem annotation for cpc_reg's address * acpi-docs: Documentation: ACPI: add new rule for gpio-line-names * acpi-config: ACPI: configfs: add missing check after configfs_register_default_group() * acpi-apei: ACPI: APEI: ERST: remove unneeded semicolon ACPI: APEI: Add is_generic_error() to identify GHES sources
2021-02-15Merge branches 'acpi-scan', 'acpi-properties' and 'acpi-platform'Rafael J. Wysocki
* acpi-scan: ACPI: scan: Rearrange code related to acpi_get_device_data() ACPI: scan: Adjust white space in acpi_device_add() ACPI: scan: Rearrange memory allocation in acpi_device_add() * acpi-properties: ACPI: property: Satisfy kernel doc validator (part 2) ACPI: property: Satisfy kernel doc validator (part 1) ACPI: property: Make acpi_node_prop_read() static ACPI: property: Remove dead code ACPI: property: Fix fwnode string properties matching * acpi-platform: ACPI: platform-profile: Fix possible deadlock in platform_profile_remove() ACPI: platform-profile: Introduce object pointers to callbacks ACPI: platform-profile: Drop const qualifier for cur_profile ACPI: platform: Add platform profile support Documentation: Add documentation for new platform_profile sysfs attribute
2021-02-15Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: rk3399_dmc: Remove unneeded semicolon PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_device PM / devfreq: Correct spelling in a comment * pm-tools: cpupower: Add cpuid cap flag for MSR_AMD_HWCR support cpupower: Remove family arg to decode_pstates() cpupower: Condense pstate enabled bit checks in decode_pstates() cpupower: Update family checks when decoding HW pstates cpupower: Remove unused pscur variable. cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag cpupower: Correct macro name for CPB caps flag cpupower: Update msr_pstate union struct naming cpupower: add Makefile dependencies for install targets
2021-02-15Merge branch 'pm-opp' into pmRafael J. Wysocki
* pm-opp: (37 commits) PM / devfreq: Add required OPPs support to passive governor PM / devfreq: Cache OPP table reference in devfreq OPP: Add function to look up required OPP's for a given OPP opp: Replace ENOTSUPP with EOPNOTSUPP opp: Fix "foo * bar" should be "foo *bar" opp: Don't ignore clk_get() errors other than -ENOENT opp: Update bandwidth requirements based on scaling up/down opp: Allow lazy-linking of required-opps opp: Remove dev_pm_opp_set_bw() devfreq: tegra30: Migrate to dev_pm_opp_set_opp() drm: msm: Migrate to dev_pm_opp_set_opp() cpufreq: qcom: Migrate to dev_pm_opp_set_opp() opp: Implement dev_pm_opp_set_opp() opp: Update parameters of _set_opp_custom() opp: Allow _generic_set_opp_clk_only() to work for non-freq devices opp: Allow _generic_set_opp_regulator() to work for non-freq devices opp: Allow _set_opp() to work for non-freq devices opp: Split _set_opp() out of dev_pm_opp_set_rate() opp: Keep track of currently programmed OPP opp: No need to check clk for errors ...
2021-02-15Merge branches 'pm-sleep', 'pm-core', 'pm-domains' and 'pm-clk'Rafael J. Wysocki
* pm-sleep: PM: sleep: Constify static struct attribute_group PM: sleep: Use dev_printk() when possible PM: sleep: No need to check PF_WQ_WORKER in thaw_kernel_threads() * pm-core: PM: runtime: Fix typos and grammar PM: runtime: Fix resposible -> responsible in runtime.c * pm-domains: PM: domains: Simplify the calculation of variables PM: domains: Add "performance" column to debug summary PM: domains: Make of_genpd_add_subdomain() return -EPROBE_DEFER PM: domains: Make set_performance_state() callback optional PM: domains: use device's next wakeup to determine domain idle state PM: domains: inform PM domain of a device's next wakeup * pm-clk: PM: clk: make PM clock layer compatible with clocks that must sleep
2021-02-15Merge branches 'pm-cpuidle' and 'pm-cpufreq'Rafael J. Wysocki
* pm-cpuidle: MAINTAINERS: cpuidle: exynos: include header in file pattern intel_idle: remove definition of DEBUG * pm-cpufreq: cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN cpufreq: Remove CPUFREQ_STICKY flag cpufreq: intel_pstate: Remove repeated word cpufreq: remove tango driver cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove() cpufreq: brcmstb-avs-cpufreq: Free resources in error path cpufreq: qcom-hw: enable boost support cpufreq: tegra20: Use resource-managed API cpufreq: intel_pstate: Get per-CPU max freq via MSR_HWP_CAPABILITIES if available cpufreq: intel_pstate: Rename two functions cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument cpufreq: intel_pstate: Always read hwp_cap_cached with READ_ONCE()
2021-02-15svcrdma: Hold private mutex while invoking rdma_accept()Chuck Lever
RDMA core mutex locking was restructured by commit d114c6feedfe ("RDMA/cma: Add missing locking to rdma_accept()") [Aug 2020]. When lock debugging is enabled, the RPC/RDMA server trips over the new lockdep assertion in rdma_accept() because it doesn't call rdma_accept() from its CM event handler. As a temporary fix, have svc_rdma_accept() take the handler_mutex explicitly. In the meantime, let's consider how to restructure the RPC/RDMA transport to invoke rdma_accept() from the proper context. Calls to svc_rdma_accept() are serialized with calls to svc_rdma_free() by the generic RPC server layer. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/linux-rdma/20210209154014.GO4247@nvidia.com/ Fixes: d114c6feedfe ("RDMA/cma: Add missing locking to rdma_accept()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-02-15nfsd: register pernet ops last, unregister firstJ. Bruce Fields
These pernet operations may depend on stuff set up or torn down in the module init/exit functions. And they may be called at any time in between. So it makes more sense for them to be the last to be registered in the init function, and the first to be unregistered in the exit function. In particular, without this, the drc slab is being destroyed before all the per-net drcs are shut down, resulting in an "Objects remaining in nfsd_drc on __kmem_cache_shutdown()" warning in exit_nfsd. Reported-by: Zhi Li <yieli@redhat.com> Fixes: 3ba75830ce17 "nfsd4: drc containerization" Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-02-15media: v4l: async: Fix kerneldoc documentation for async functionsSakari Ailus
Fix kerneldoc documentation for functions that add async sub-devices to notifiers. The functions themselves were improved recently but that left issues with the kerneldoc documentation. Fix them now. Also remove underscores from macro argument names. [mchehab: fix a build breakage] Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: b01edcbd409c ("media: v4l2-async: Improve v4l2_async_notifier_add_*_subdev() API") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-15Merge tag 'irqchip-5.12' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier - New driver for the MIPS-based Realtek RTL838x/RTL839x SoC - Conversion of the sun6i-r support code to a hierarchical setup - Fix wake-up interrupts for the ls-extirq driver - Fix MSI allocation for the loongson-pch-msi driver - Add compatible strings for new Qualcomm SoCs - Tidy up a few Kconfig entries (IMX, CSKY) - Spelling phyksiz - Remove the sirfsoc and tango drivers Link: https://lore.kernel.org/r/20210214124015.3333457-1-maz@kernel.org
2021-02-15MIPS: kernel: Drop kgdb_call_nmi_hookThomas Bogendoerfer
With the removal of set_fs() calls kgdb_call_nmi_hook() is now the same as the default implementation, so we can remove it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-15Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer"Wei Liu
This reverts commit a8c3209998afb5c4941b49e35b513cea9050cb4a. It is reported that the said commit caused regression in netvsc. Reported-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-02-15gpio: ep93xx: refactor base IRQ numberNikita Shubin
- use predefined constants instead of plain numbers - use provided bank IRQ number instead of defined constant for port F Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: ep93xx: refactor ep93xx_gpio_add_bankNikita Shubin
- replace plain numbers with girq->num_parents in devm_kcalloc - replace plain numbers with girq->num_parents for port F - refactor i - 1 to i + 1 to make loop more readable - combine getting IRQ's loop and setting handler's into single loop Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: ep93xx: Fix typo s/hierarchial/hierarchicalNikita Shubin
Fix typo in comment. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: ep93xx: drop to_irq bindingNikita Shubin
As ->to_irq is redefined in gpiochip_add_irqchip, having it defined in driver is useless, so let's drop it. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: ep93xx: Fix wrong irq numbers in port FNikita Shubin
Port F IRQ's should be statically mapped to EP93XX_GPIO_F_IRQ_BASE. So we need to specify girq->first otherwise: "If device tree is used, then first_irq will be 0 and IRQ's get mapped dynamically on the fly" And that's not the thing we want. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: uapi: use the preferred SPDX license identifierBartosz Golaszewski
GPL-2.0 license identifier is deprecated. User-space projects that want to include the kernel header with their source-code will be unable to become fully REUSE compliant due to the reuse tool complaining about deprecated licenses. Change the SPDX identifier to GPL-2.0-only. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: gpio-xilinx: Add check if width exceeds 32Srinivas Neeli
Add check to see if gpio-width property does not exceed 32. If it exceeds then return -EINVAL. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
generated by cgit (git 2.34.1) at 2025-07-19 19:35:04 +0000