summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-18arm64: dts: qcom: msm8916-samsung-j5-common: Add new device treesLin, Meng-Bo
After moving msm8916-samsung-j5.dts to msm8916-samsung-j5-common.dtsi, Add new J5 2016 device tree. [Add j5x device tree] Co-developed-by: Josef W Menad <JosefWMenad@protonmail.ch> Signed-off-by: Josef W Menad <JosefWMenad@protonmail.ch> [Use &pm8916_usbin as USB extcon and add chassis-type for j5x] Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> [Use common init device tree] Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230106143024.547194-1-linmengbo0689@protonmail.com
2023-01-18arm64: dts: qcom: msm8916-samsung-j5-common: Add initial common device treeLin, Meng-Bo
The smartphones below are using the MSM8916 SoC, which are released in 2015-2016: Samsung Galaxy J5 2015 (SM-J500*) Samsung Galaxy J5 2016 (SM-J510*) Move msm8916-samsung-j5.dts to msm8916-samsung-j5-common.dtsi, and add a common device tree for with initial support for: - GPIO keys - SDHCI (internal and external storage) - USB Device Mode - UART (on USB connector via the SM5703 MUIC) - WCNSS (WiFi/BT) - Regulators The two devices (all other variants of J5 released in 2015 and J5X released in 2016) are very similar, with some differences in display and GPIO pins. The common parts are shared in msm8916-samsung-j5-common.dtsi to reduce duplication. This patch rewrites J5 2015 devices, later patches will add support for other models. Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230106143010.547140-1-linmengbo0689@protonmail.com
2023-01-18arm64: dts: qcom: sm7225-fairphone-fp4: enable IPALuca Weiss
IPA is used for mobile data. Enable it. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230104193759.3286014-3-elder@linaro.org
2023-01-18arm64: dts: qcom: sm6350: add IPA nodeLuca Weiss
IPA is used for mobile data. Add a node describing it. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230104193759.3286014-2-elder@linaro.org
2023-01-18arm64: dts: qcom: sm6350: Set up DDR & L3 scalingKonrad Dybcio
Add the CPU OPP tables including core frequency and L3 bus frequency. The L3 throughput values were chosen by studying the frequencies available in HW LUT and picking the highest one that's less than the CPU frequency. DDR clock rates come from the vendor kernel. Available values from the HW LUT: 300000000 556800000 652800000 806400000 844800000 940800000 1132800000 1209600000 1286400000 1401600000 1459200000 Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230104171643.1004054-3-konrad.dybcio@linaro.org
2023-01-18arm64: dts: qcom: sm6350: Add OSM L3 nodeKonrad Dybcio
Enable the OSM block responsible for scaling the L3 cache. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230104171643.1004054-2-konrad.dybcio@linaro.org
2023-01-18arm64: dts: qcom: qcs404: specify per-sensor calibration cellsDmitry Baryshkov
Specify pre-parsed per-sensor calibration nvmem cells in the tsens device node rather than parsing the whole data blob in the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230101194034.831222-19-dmitry.baryshkov@linaro.org
2023-01-18arm64: dts: qcom: msm8976: specify per-sensor calibration cellsDmitry Baryshkov
Specify pre-parsed per-sensor calibration nvmem cells in the tsens device node rather than parsing the whole data blob in the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230101194034.831222-18-dmitry.baryshkov@linaro.org
2023-01-18arm64: dts: qcom: msm8916: specify per-sensor calibration cellsDmitry Baryshkov
Specify pre-parsed per-sensor calibration nvmem cells in the tsens device node rather than parsing the whole data blob in the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230101194034.831222-17-dmitry.baryshkov@linaro.org
2023-01-18arm64: dts: qcom: msm8956: use SoC-specific compat for tsensDmitry Baryshkov
The slope values used during tsens calibration differ between msm8976 and msm8956 SoCs. Use SoC-specific compat value for the msm8956 SoC. Fixes: 0484d3ce0902 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230101194034.831222-16-dmitry.baryshkov@linaro.org
2023-01-18arm64: dts: qcom: use qcom,gsi-loader for IPAAlex Elder
Depending on the platform, either the modem or the AP must load GSI firmware for IPA before it can be used. To date, this has been indicated by the presence or absence of a "modem-init" property. That mechanism has been deprecated. Instead, we indicate how GSI firmware should be loaded by the value of the "qcom,gsi-loader" property. Update all arm64 platforms that use IPA to use the "qcom,gsi-loader" property to specify how the GSI firmware is loaded. Update the affected nodes so the status property is last. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [bjorn: Moved sc7280 change herobrine-lte-sku] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221231002716.2367375-3-elder@linaro.org
2023-01-18arm64: dts: qcom: sc7280-idp: add amp pin config functionKrzysztof Kozlowski
Bindings expect each pin config to come with a "function" property: sc7280-crd-r3.dtb: pinctrl@f100000: amp-en-state: 'oneOf' conditional failed, one must be fixed: 'function' is a required property 'bias-pull-down', 'drive-strength', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221230135645.56401-9-krzysztof.kozlowski@linaro.org
2023-01-18arm64: dts: qcom: msm8916-samsung-a2015: correct motor pinctrl node nameKrzysztof Kozlowski
Correct typo in motor pinctrl node name: msm8916-samsung-a5u-eur.dtb: pinctrl@1000000: 'motor-en-default-stae' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221230135645.56401-8-krzysztof.kozlowski@linaro.org
2023-01-18arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_memPetr Vorel
It's disabled on downstream [1] thus not shown on downstream dmesg. Removing it fixes warnings on v6.1: [ 0.000000] OF: reserved mem: OVERLAP DETECTED! [ 0.000000] dfps_data_mem@3400000 (0x0000000003400000--0x0000000003401000) overlaps with memory@3400000 (0x0000000003400000--0x0000000004600000) [1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#137 Fixes: 976d321f32dc ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994") Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221226185440.440968-3-pevik@seznam.cz
2023-01-18arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem sizePetr Vorel
Original google firmware reports 12 MiB: [ 0.000000] cma: Found cont_splash_mem@0, memory base 0x0000000003400000, size 12 MiB, limit 0xffffffffffffffff which is actually 12*1024*1024 = 0xc00000. This matches the aosp source [1]: &cont_splash_mem { reg = <0 0x03400000 0 0xc00000>; }; Fixes: 3cb6a271f4b0 ("arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping") Fixes: 976d321f32dc ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994") [1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#141 Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221226185440.440968-2-pevik@seznam.cz
2023-01-18Merge tag 'qcom-arm64-fixes-for-6.2' into arm64-for-6.3Bjorn Andersson
Qualcomm ARM64 DTS fixes for 6.2 The cluster idle issue was resolved on SM8250, so the change disabling the cluster state is being reverted. Issues where identified with the QMP PHY binding, that would prevent enablement of Displayport and it was decided not to support the old binding for the recently introduced SC8280XP, which broke USB. This adjusts the USB PHY nodes to the new binding. The reset signal for the first QMP PHY is corrected as well. The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus 6P, to avoid instabilities caused by use of protected memory regions. The compatible for the MSM8992 TCSR mutex is corrected as well. Lastly SDHCI interconnects on SM8350 are corrected to match the providers #interconnect-cells.
2023-01-18arm64: dts: qcom: sm8350: Use 2 interconnect cellsRobert Foss
Use two interconnect cells in order to optionally support a path tag. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117115712.1054613-1-rfoss@kernel.org
2023-01-18arm64: dts: qcom: sm8350: Add &tlmm gpio-line-namesRobert Foss
Add GPIO line names as described by the sm8350-hdk schematic. Signed-off-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117112537.1016250-1-rfoss@kernel.org
2023-01-18arm64: dts: qcom: sc8280xp: Define CMA region for CRD and X13sBjorn Andersson
While booting the CRD, a series of CMA allocation errors can be seen in the kernel log: cma: cma_alloc: reserved: alloc failed, req-size: 128 pages, ret: -12 Growing the CMA region and querying /proc/meminfo indicates that a newly booted system (currently) uses 64MB CMA. Define a memory region sufficiently large for the current use cases, to avoid forcing users to add this themselves, through command line parameters etc. While fixing the CRD define the same region for the X13s. Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117184630.2775905-1-quic_bjorande@quicinc.com
2023-01-18arm64: dts: qcom: sc7280: add DP audio to herobrine rt5682 1-mic dtsiJudy Hsiao
1. Add DisplayPort sound node and lpass_cpu node. 2. Adjust the dai-link order to make the order to be consistent with sc7280-herobrine-audio-rt5682-3mic.dtsi. Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230118011853.1614566-1-judyhsiao@chromium.org
2023-01-18arm64: dts: qcom: sm8250: clean up wcd938x codec nodeJohan Hovold
Clean up the wcd938x codec node somewhat by adding newline separators, reordering properties and renaming it 'audio-codec'. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103103141.15807-7-johan+linaro@kernel.org
2023-01-18arm64: dts: qcom: sm8450-hdk: move wcd938x codec nodeJohan Hovold
The wcd938x codec is not a memory-mapped device and does not belong under the soc node. Move the node to the root node to avoid DT validation failures. While at it, clean up the node somewhat by reordering properties and renaming it 'audio-codec'. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103103141.15807-6-johan+linaro@kernel.org
2023-01-18arm64: dts: qcom: sc8280xp-x13s: move wcd938x codec nodeJohan Hovold
The wcd938x codec is not a memory-mapped device and does not belong under the soc node. Move the node to the root node to avoid DT validation failures. While at it, clean up the node somewhat by adding newline separators, reordering properties and renaming it 'audio-codec'. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103103141.15807-5-johan+linaro@kernel.org
2023-01-18arm64: dts: qcom: sc8280xp-x13s: move vamacro nodeJohan Hovold
Move the vamacro node to restore the alphabetical sort order. While at it, add some newline separators to improve readability. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103103141.15807-3-johan+linaro@kernel.org
2023-01-18arm64: dts: qcom: sc8280xp: disable sound nodesJohan Hovold
The sound nodes in the SoC dtsi should be disabled by default. Note that the lpass-tlmm and macro blocks depend on having the board dts enable the adsp and specifying an appropriate firmware to enable the q6prm clock controller. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103103141.15807-2-johan+linaro@kernel.org
2023-01-18arm64: dts: qcom: sc8280xp: drop unused properties from tx-macroKrzysztof Kozlowski
tx-macro does not have children and does not allow address/size cells: sc8280xp-crd.dtb: txmacro@3220000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230118094224.51704-3-krzysztof.kozlowski@linaro.org
2023-01-18arm64: dts: qcom: sc8280xp: drop bogus clock-controller propertyKrzysztof Kozlowski
There is no "clock-controller" property: sa8295p-adp.dtb: service@2: clock-controller: 'clock-controller' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/sound/qcom,q6prm.yaml Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230118094224.51704-2-krzysztof.kozlowski@linaro.org
2023-01-18arm64: dts: qcom: sm8250: drop unused clock-frequency from rx-macroKrzysztof Kozlowski
Neither qcom,sm8250-lpass-rx-macro bindings nor the driver use "clock-frequency" property. sm8250-mtp.dtb: rxmacro@3200000: Unevaluated properties are not allowed ('clock-frequency' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230118094224.51704-1-krzysztof.kozlowski@linaro.org
2023-01-17arm64: dts: qcom: sc7180: set ath10k output power calibration stringYunlong Jia
Add the string to load RF output power table for pazquel360 project. Signed-off-by: Yunlong Jia <ecs.beijing2022@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117085212.1.If242b1cd61b2e87e312dd9cf81e20301bae2a5a4@changeid
2023-01-17arm64: dts: qcom: sm6115: Add debug related nodesBhupesh Sharma
Add dtsi nodes related to coresight debug units such as cti, etm, etr, funnel(s), replicator(s), etc. for Qualcomm sm6115 SoC. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230116164032.551223-1-bhupesh.sharma@linaro.org
2023-01-17arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridgeRobert Foss
The sm8350-hdk ships with the LT9611 UXC DSI/HDMI bridge chip. In order to toggle the board to enable the HDMI output, switch #7 & #8 on the rightmost multi-switch package have to be toggled to On. Signed-off-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117120223.1055225-4-rfoss@kernel.org
2023-01-17arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodesRobert Foss
Enable the display subsystem and the dsi0 output for the sm8350-hdk board. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117120223.1055225-3-rfoss@kernel.org
2023-01-17arm64: dts: qcom: sm8350: Add display system nodesRobert Foss
Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these nodes the display subsystem is configured to support one DSI output. Signed-off-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117120223.1055225-2-rfoss@kernel.org
2023-01-17arm64: dts: qcom: sm8550-mtp: Add UFS host controller and PHY nodeAbel Vesa
Enable UFS host controller and PHY node on SM8550 MTP board. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230116141000.1831351-2-abel.vesa@linaro.org
2023-01-17arm64: dts: qcom: sm8550: Add UFS host controller and phy nodesAbel Vesa
Add UFS host controller and PHY nodes. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230116141000.1831351-1-abel.vesa@linaro.org
2023-01-17arm64: dts: qcom: sdm630-nile: Reserve simplefb memoryKonrad Dybcio
Reserve the bit of memory that simplefb uses to ensure it can always probe. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230116141451.470158-2-konrad.dybcio@linaro.org
2023-01-17arm64: dts: qcom: sdm630-nile: Don't use underscores in node namesKonrad Dybcio
Rename the reserved-memory subnodes such that they don't use undescores. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230116141451.470158-1-konrad.dybcio@linaro.org
2023-01-16arm64: dts: qcom: add data-lanes and link-freuencies into dp_out endpointKuogee Hsieh
Move data-lanes property from mdss_dp node to dp_out endpoint. Also add link-frequencies property into dp_out endpoint as well. The last frequency specified at link-frequencies will be the max link rate supported by DP. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1672163103-31254-2-git-send-email-quic_khsieh@quicinc.com
2023-01-16arm64: dts: qcom: sc7180-trogdor: align DAI children names with DT schemaKrzysztof Kozlowski
Bindings expect DAI children to be named "dai-link": sc7180-trogdor-coachz-r1.dtb: lpass@62d87000: Unevaluated properties are not allowed ('hdmi@5', 'mi2s@0', 'mi2s@1' were unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221227163158.102737-2-krzysztof.kozlowski@linaro.org
2023-01-16arm64: dts: qcom: sm8350: drop unused dispcc power-domain-namesKrzysztof Kozlowski
Display clock controller bindings do not allow power-domain-names: sm8350-hdk.dtb: clock-controller@af00000: 'power-domain-names' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221227163158.102737-1-krzysztof.kozlowski@linaro.org
2023-01-16arm64: dts: qcom: use UFS symbol clocks provided by PHYDmitry Baryshkov
Remove manually created symbol clocks and replace them with clocks provided by PHY. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221123104443.3415267-5-dmitry.baryshkov@linaro.org
2023-01-16arm64: dts: qcom: sm8350-hdk: enable PCIe devicesDmitry Baryshkov
Enable PCIe0 and PCIe1 hosts found on SM8350 HDK board. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118233242.2904088-9-dmitry.baryshkov@linaro.org
2023-01-16arm64: dts: qcom: sm8350: add PCIe devicesDmitry Baryshkov
Add PCIe0 and PCIe1 (and corresponding PHY) devices found on SM8350 platform. The PCIe0 is a 1-lane Gen3 host, PCIe1 is a 2-lane Gen3 host. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118233242.2904088-8-dmitry.baryshkov@linaro.org
2023-01-12arm64: dts: qcom: sc8280xp: Use MMCX for all DP controllersBjorn Andersson
While MDSS_GDSC is a subdomain of MMCX, Linux does not respect this relationship and sometimes invokes sync_state on the rpmhpd (MMCX) before the DisplayPort controller has had a chance to probe. The result when this happens is that the power is lost to the multimedia subsystem between the probe of msm_drv and the DisplayPort controller - which results in an irrecoverable state. While this is an implementation problem, this aligns the power domain setting of the one DP instance with that of all the others. Fixes: 57d6ef683a15 ("arm64: dts: qcom: sc8280xp: Define some of the display blocks") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230112135055.3836555-1-quic_bjorande@quicinc.com
2023-01-12arm64: dts: qcom: sc8280xp-crd: allow vreg_l3b to be disabledJohan Hovold
The vreg_l3b supply is used by the eDP, UFS and USB1 PHYs which are now described by the devicetree so that the regulator no longer needs to be marked always-on. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230112074503.12185-1-johan+linaro@kernel.org
2023-01-12arm64: dts: qcom: sm8450: Add TCSR halt register spaceMukesh Ojha
Add TCSR register space and refer it from scm node, so that it can be used by SCM driver. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1673513697-30173-2-git-send-email-quic_mojha@quicinc.com
2023-01-12arm64: dts: qcom: sc8280xp: Vote for CX in USB controllersBjorn Andersson
Running GCC_USB30_*_MASTER_CLK at 200MHz requires CX at nominal level, not doing so results in occasional lockups. This was previously hidden by the fact that the display stack incorrectly voted for CX (instead of MMCX). Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230112135117.3836655-1-quic_bjorande@quicinc.com
2023-01-11arm64: dts: qcom: sm8250: drop the virtual ipa-virt deviceDmitry Baryshkov
Drop the virtual ipa-virt device. The interconnects it provided are going to be represented as <&rpmhcc RPMH_IPA_CLK> clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230109002935.244320-13-dmitry.baryshkov@linaro.org
2023-01-11arm64: dts: qcom: sm8150: drop the virtual ipa-virt deviceDmitry Baryshkov
Drop the virtual ipa-virt device. The interconnects it provided are going to be represented as <&rpmhcc RPMH_IPA_CLK> clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230109002935.244320-12-dmitry.baryshkov@linaro.org
2023-01-11arm64: dts: qcom: pm7250b: Add BAT_ID vadc channelLuca Weiss
Add a node describing the ADC5_BAT_ID_100K_PU channel with the properties taken from downstream kernel. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230106-pm7250b-bat_id-v1-2-82ca8f2db741@fairphone.com
generated by cgit (git 2.34.1) at 2025-07-16 19:31:36 +0000