summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-20mm: migrate high-order folios in swap cache correctlyCharan Teja Kalla
Large folios occupy N consecutive entries in the swap cache instead of using multi-index entries like the page cache. However, if a large folio is re-added to the LRU list, it can be migrated. The migration code was not aware of the difference between the swap cache and the page cache and assumed that a single xas_store() would be sufficient. This leaves potentially many stale pointers to the now-migrated folio in the swap cache, which can lead to almost arbitrary data corruption in the future. This can also manifest as infinite loops with the RCU read lock held. [willy@infradead.org: modifications to the changelog & tweaked the fix] Fixes: 3417013e0d18 ("mm/migrate: Add folio_migrate_mapping()") Link: https://lkml.kernel.org/r/20231214045841.961776-1-willy@infradead.org Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Charan Teja Kalla <quic_charante@quicinc.com> Closes: https://lkml.kernel.org/r/1700569840-17327-1-git-send-email-quic_charante@quicinc.com Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20maple_tree: do not preallocate nodes for slot storesSidhartha Kumar
mas_preallocate() defaults to requesting 1 node for preallocation and then ,depending on the type of store, will update the request variable. There isn't a check for a slot store type, so slot stores are preallocating the default 1 node. Slot stores do not require any additional nodes, so add a check for the slot store case that will bypass node_count_gfp(). Update the tests to reflect that slot stores do not require allocations. User visible effects of this bug include increased memory usage from the unneeded node that was allocated. Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing") Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Cc: <stable@vger.kernel.org> [6.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20mm/filemap: avoid buffered read/write race to read inconsistent dataBaokun Li
The following concurrency may cause the data read to be inconsistent with the data on disk: cpu1 cpu2 ------------------------------|------------------------------ // Buffered write 2048 from 0 ext4_buffered_write_iter generic_perform_write copy_page_from_iter_atomic ext4_da_write_end ext4_da_do_write_end block_write_end __block_commit_write folio_mark_uptodate // Buffered read 4096 from 0 smp_wmb() ext4_file_read_iter set_bit(PG_uptodate, folio_flags) generic_file_read_iter i_size_write // 2048 filemap_read unlock_page(page) filemap_get_pages filemap_get_read_batch folio_test_uptodate(folio) ret = test_bit(PG_uptodate, folio_flags) if (ret) smp_rmb(); // Ensure that the data in page 0-2048 is up-to-date. // New buffered write 2048 from 2048 ext4_buffered_write_iter generic_perform_write copy_page_from_iter_atomic ext4_da_write_end ext4_da_do_write_end block_write_end __block_commit_write folio_mark_uptodate smp_wmb() set_bit(PG_uptodate, folio_flags) i_size_write // 4096 unlock_page(page) isize = i_size_read(inode) // 4096 // Read the latest isize 4096, but without smp_rmb(), there may be // Load-Load disorder resulting in the data in the 2048-4096 range // in the page is not up-to-date. copy_page_to_iter // copyout 4096 In the concurrency above, we read the updated i_size, but there is no read barrier to ensure that the data in the page is the same as the i_size at this point, so we may copy the unsynchronized page out. Hence adding the missing read memory barrier to fix this. This is a Load-Load reordering issue, which only occurs on some weak mem-ordering architectures (e.g. ARM64, ALPHA), but not on strong mem-ordering architectures (e.g. X86). And theoretically the problem doesn't only happen on ext4, filesystems that call filemap_read() but don't hold inode lock (e.g. btrfs, f2fs, ubifs ...) will have this problem, while filesystems with inode lock (e.g. xfs, nfs) won't have this problem. Link: https://lkml.kernel.org/r/20231213062324.739009-1-libaokun1@huawei.com Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: yangerkun <yangerkun@huawei.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20kunit: kasan_test: disable fortify string checker on kmalloc_oob_memsetNico Pache
Similar to commit 09c6304e38e4 ("kasan: test: fix compatibility with FORTIFY_SOURCE") the kernel is panicing in kmalloc_oob_memset_*. This is due to the `ptr` not being hidden from the optimizer which would disable the runtime fortify string checker. kernel BUG at lib/string_helpers.c:1048! Call Trace: [<00000000272502e2>] fortify_panic+0x2a/0x30 ([<00000000272502de>] fortify_panic+0x26/0x30) [<001bffff817045c4>] kmalloc_oob_memset_2+0x22c/0x230 [kasan_test] Hide the `ptr` variable from the optimizer to fix the kernel panic. Also define a memset_size variable and hide that as well. This cleans up the code and follows the same convention as other tests. [npache@redhat.com: address review comments from Andrey] Link: https://lkml.kernel.org/r/20231214164423.6202-1-npache@redhat.com Link: https://lkml.kernel.org/r/20231212232659.18839-1-npache@redhat.com Signed-off-by: Nico Pache <npache@redhat.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20kexec: select CRYPTO from KEXEC_FILE instead of depending on itArnd Bergmann
All other users of crypto code use 'select' instead of 'depends on', so do the same thing with KEXEC_FILE for consistency. In practice this makes very little difference as kernels with kexec support are very likely to also include some other feature that already selects both crypto and crypto_sha256, but being consistent here helps for usability as well as to avoid potential circular dependencies. This reverts the dependency back to what it was originally before commit 74ca317c26a3f ("kexec: create a new config option CONFIG_KEXEC_FILE for new syscall"), which changed changed it with the comment "This should be safer as "select" is not recursive", but that appears to have been done in error, as "select" is indeed recursive, and there are no other dependencies that prevent CRYPTO_SHA256 from being selected here. Link: https://lkml.kernel.org/r/20231023110308.1202042-2-arnd@kernel.org Fixes: 74ca317c26a3f ("kexec: create a new config option CONFIG_KEXEC_FILE for new syscall") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com> Tested-by: Eric DeVolder <eric_devolder@yahoo.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20kexec: fix KEXEC_FILE dependenciesArnd Bergmann
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the 'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which causes a link failure when all the crypto support is in a loadable module and kexec_file support is built-in: x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load': (.text+0x32e30a): undefined reference to `crypto_alloc_shash' x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update' x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final' Both s390 and x86 have this problem, while ppc64 and riscv have the correct dependency already. On riscv, the dependency is only used for the purgatory, not for the kexec_file code itself, which may be a bit surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable KEXEC_FILE but then the purgatory code is silently left out. Move this into the common Kconfig.kexec file in a way that is correct everywhere, using the dependency on CRYPTO_SHA256=y only when the purgatory code is available. This requires reversing the dependency between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect remains the same, other than making riscv behave like the other ones. On s390, there is an additional dependency on CRYPTO_SHA256_S390, which should technically not be required but gives better performance. Remove this dependency here, noting that it was not present in the initial Kconfig code but was brought in without an explanation in commit 71406883fd357 ("s390/kexec_file: Add kexec_file_load system call"). [arnd@arndb.de: fix riscv build] Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com> Tested-by: Eric DeVolder <eric_devolder@yahoo.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20Merge tag 'ovl-fixes-6.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs Pull overlayfs fix from Amir Goldstein: "Fix a regression from this merge window" * tag 'ovl-fixes-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: fix dentry reference leak after changes to underlying layers
2023-12-20Merge tag 'bcachefs-2023-12-19' of https://evilpiepirate.org/git/bcachefsLinus Torvalds
Pull more bcachefs fixes from Kent Overstreet: - Fix a deadlock in the data move path with nocow locks (vs. update in place writes); when trylock failed we were incorrectly waiting for in flight ios to flush. - Fix reporting of NFS file handle length - Fix early error path in bch2_fs_alloc() - list head wasn't being initialized early enough - Make sure correct (hardware accelerated) crc modules get loaded - Fix a rare overflow in the btree split path, when the packed bkey format grows and all the keys have no value (LRU btree). - Fix error handling in the sector allocator This was causing writes to spuriously fail in multidevice setups, and another bug meant that the errors weren't being logged, only reported via fsync. * tag 'bcachefs-2023-12-19' of https://evilpiepirate.org/git/bcachefs: bcachefs: Fix bch2_alloc_sectors_start_trans() error handling bcachefs; guard against overflow in btree node split bcachefs: btree_node_u64s_with_format() takes nr keys bcachefs: print explicit recovery pass message only once bcachefs: improve modprobe support by providing softdeps bcachefs: fix invalid memory access in bch2_fs_alloc() error path bcachefs: Fix determining required file handle length bcachefs: Fix nocow locks deadlock
2023-12-20Merge tag 'nfsd-6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Address a few recently-introduced issues * tag 'nfsd-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Revert 5f7fc5d69f6e92ec0b38774c387f5cf7812c5806 NFSD: Revert 738401a9bd1ac34ccd5723d69640a4adbb1a4bc0 NFSD: Revert 6c41d9a9bd0298002805758216a9c44e38a8500d nfsd: hold nfsd_mutex across entire netlink operation nfsd: call nfsd_last_thread() before final nfsd_put()
2023-12-20Merge tag 'dm-6.7/dm-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - DM raid target (and MD raid) fix for reconfig_mutex MD deadlock that should have been merged along with recent v6.7-rc6 MD fixes (see MD related commits: f2d87a759f68^..b39113349de6) - DM integrity target fix to avoid modifying immutable biovec in the integrity_metadata() edge case where kmalloc fails. - Fix drivers/md/Kconfig so DM_AUDIT depends on BLK_DEV_DM. - Update DM entry in MAINTAINERS to remove stale info. * tag 'dm-6.7/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: MAINTAINERS: remove stale info for DEVICE-MAPPER dm audit: fix Kconfig so DM_AUDIT depends on BLK_DEV_DM dm-integrity: don't modify bio's immutable bio_vec in integrity_metadata() dm-raid: delay flushing event_work() after reconfig_mutex is released
2023-12-20tracing/synthetic: fix kernel-doc warningsRandy Dunlap
scripts/kernel-doc warns about using @args: for variadic arguments to functions. Documentation/doc-guide/kernel-doc.rst says that this should be written as @...: instead, so update the source code to match that, preventing the warnings. trace_events_synth.c:1165: warning: Excess function parameter 'args' description in '__synth_event_gen_cmd_start' trace_events_synth.c:1714: warning: Excess function parameter 'args' description in 'synth_event_trace' Link: https://lore.kernel.org/linux-trace-kernel/20231220061226.30962-1-rdunlap@infradead.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 35ca5207c2d11 ("tracing: Add synthetic event command generation functions") Fixes: 8dcc53ad956d2 ("tracing: Add synth_event_trace() and related functions") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-20arm64: dts: mediatek: mt8395-genio-1200-evk: add interrupt-parent for mt6360Macpaul Lin
This patch fix the warning introduced by mt6360 node in mt8395-genio-1200-evk.dts. arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning (interrupts_property): /soc/i2c@11d01000/pmic@34:#interrupt-cells: size is (8), expected multiple of 16 Add a missing 'interrupt-parent' to fix this warning. Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board") Reported-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-devicetree/20231212214737.230115-1-arnd@kernel.org/ Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-20Merge tag 'am3-usb-hang-fix-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fix for occasional boot hang for am335x USB A fix for occasional boot hang for am335x USB that I've only recently started noticing. This can be merged naturally whenever suitable. This issue has been seen with other similar SoCs earlier and has clearly existed for a long time. * tag 'am3-usb-hang-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix occasional boot hang for am3 usb Link: https://lore.kernel.org/r/pull-1703071616-395333@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-20Merge tag 'omap-for-v6.7/fixes-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps A few fixes for omaps: - A regression fix for ti-sysc interconnect target module driver to not access registers after reset if srst_udelay quirk is needed - DRA7 L3 NoC node register size fix * tag 'omap-for-v6.7/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init ARM: dts: dra7: Fix DRA7 L3 NoC node register size bus: ti-sysc: Flush posted write only after srst_udelay Link: https://lore.kernel.org/r/pull-1702037799-781982@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-20pinctrl: cy8c95x0: Fix get_pincfgPatrick Rudolph
Invert the register value for PIN_CONFIG_OUTPUT_ENABLE to return the opposite of PIN_CONFIG_INPUT_ENABLE. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20231219125120.4028862-3-patrick.rudolph@9elements.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-20pinctrl: cy8c95x0: Fix regressionPatrick Rudolph
Commit 1fa3df901f2c ("pinctrl: cy8c95x0: Remove custom ->set_config()") removed support for PIN_CONFIG_INPUT_ENABLE and PIN_CONFIG_OUTPUT. Add the following options to restore functionality: - PIN_CONFIG_INPUT_ENABLE - PIN_CONFIG_OUTPUT_ENABLE Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20231219125120.4028862-2-patrick.rudolph@9elements.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-20pinctrl: cy8c95x0: Fix typoPatrick Rudolph
Fix typo to make pinctrl-cy8c95x compile again. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20231219125120.4028862-1-patrick.rudolph@9elements.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-20afs: Fix dynamic root lookup DNS checkDavid Howells
In the afs dynamic root directory, the ->lookup() function does a DNS check on the cell being asked for and if the DNS upcall reports an error it will report an error back to userspace (typically ENOENT). However, if a failed DNS upcall returns a new-style result, it will return a valid result, with the status field set appropriately to indicate the type of failure - and in that case, dns_query() doesn't return an error and we let stat() complete with no error - which can cause confusion in userspace as subsequent calls that trigger d_automount then fail with ENOENT. Fix this by checking the status result from a valid dns_query() and returning an error if it indicates a failure. Fixes: bbb4c4323a4d ("dns: Allow the dns resolver to retrieve a server set") Reported-by: Markus Suvanto <markus.suvanto@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216637 Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-12-20afs: Fix the dynamic root's d_delete to always delete unused dentriesDavid Howells
Fix the afs dynamic root's d_delete function to always delete unused dentries rather than only deleting them if they're positive. With things as they stand upstream, negative dentries stemming from failed DNS lookups stick around preventing retries. Fixes: 66c7e1d319a5 ("afs: Split the dynroot stuff out and give it its own ops tables") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-12-20net: stmmac: fix incorrect flag check in timestamp interruptLai Peter Jun Ann
The driver should continue get the timestamp if STMMAC_FLAG_EXT_SNAPSHOT_EN flag is set. Fixes: aa5513f5d95f ("net: stmmac: replace the ext_snapshot_en field with a flag") Cc: <stable@vger.kernel.org> # 6.6 Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-20Merge tag 'for-net-2023-12-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Add encryption key size check when acting as peripheral - Shut up false-positive build warning - Send reject if L2CAP command request is corrupted - Fix Use-After-Free in bt_sock_recvmsg - Fix not notifying when connection encryption changes - Fix not checking if HCI_OP_INQUIRY has been sent - Fix address type send over to the MGMT interface - Fix deadlock in vhci_send_frame ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19bcachefs: fix BCH_FSCK_ERR enumKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-19bcachefs: Fix bch2_alloc_sectors_start_trans() error handlingKent Overstreet
When we fail to allocate because of insufficient open buckets, we don't want to retry from the full set of devices - we just want to retry in blocking mode. But if the retry in blocking mode fails with a different error code, we end up squashing the -BCH_ERR_open_buckets_empty error with an error that makes us thing we won't be able to allocate (insufficient_devices) - which is incorrect when we didn't try to allocate from the full set of devices, and causes the write to fail. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-19bcachefs; guard against overflow in btree node splitKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-19bcachefs: btree_node_u64s_with_format() takes nr keysKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-19i2c: aspeed: Handle the coalesced stop conditions with the start conditions.Quan Nguyen
Some masters may drive the transfers with low enough latency between the nak/stop phase of the current command and the start/address phase of the following command that the interrupts are coalesced by the time we process them. Handle the stop conditions before processing SLAVE_MATCH to fix the complaints that sometimes occur below. "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected 0x00000086, but was 0x00000084" Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver") Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-12-19nvme-pci: fix sleeping function called from interrupt contextMaurizio Lombardi
the nvme_handle_cqe() interrupt handler calls nvme_complete_async_event() but the latter may call nvme_auth_stop() which is a blocking function. Sleeping functions can't be called in interrupt context BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/15 Call Trace: <IRQ> __cancel_work_timer+0x31e/0x460 ? nvme_change_ctrl_state+0xcf/0x3c0 [nvme_core] ? nvme_change_ctrl_state+0xcf/0x3c0 [nvme_core] nvme_complete_async_event+0x365/0x480 [nvme_core] nvme_poll_cq+0x262/0xe50 [nvme] Fix the bug by moving nvme_auth_stop() to fw_act_work (executed by the nvme_wq workqueue) Fixes: f50fff73d620 ("nvme: implement In-Band authentication") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-19drm/amdgpu: re-create idle bo's PTE during VM state machine resetZhenGuo Yin
Idle bo's PTE needs to be re-created when resetting VM state machine. Set idle bo's vm_bo as moved to mark it as invalid. Fixes: 55bf196f60df ("drm/amdgpu: reset VM when an error is detected") Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19Merge tag 'trace-v6.7-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "While working on the ring buffer, I found one more bug with the timestamp code, and the fix for this removed the need for the final 64-bit cmpxchg! The ring buffer events hold a "delta" from the previous event. If it is determined that the delta can not be calculated, it falls back to adding an absolute timestamp value. The way to know if the delta can be used is via two stored timestamps in the per-cpu buffer meta data: before_stamp and write_stamp The before_stamp is written by every event before it tries to allocate its space on the ring buffer. The write_stamp is written after it allocates its space and knows that nothing came in after it read the previous before_stamp and write_stamp and the two matched. A previous fix dd9394257078 ("ring-buffer: Do not try to put back write_stamp") removed putting back the write_stamp to match the before_stamp so that the next event could use the delta, but races were found where the two would match, but not be for of the previous event. It was determined to allow the event reservation to not have a valid write_stamp when it is finished, and this fixed a lot of races. The last use of the 64-bit timestamp cmpxchg depended on the write_stamp being valid after an interruption. But this is no longer the case, as if an event is interrupted by a softirq that writes an event, and that event gets interrupted by a hardirq or NMI and that writes an event, then the softirq could finish its reservation without a valid write_stamp. In the slow path of the event reservation, a delta can still be used if the write_stamp is valid. Instead of using a cmpxchg against the write stamp, the before_stamp needs to be read again to validate the write_stamp. The cmpxchg is not needed. This updates the slowpath to validate the write_stamp by comparing it to the before_stamp and removes all rb_time_cmpxchg() as there are no more users of that function. The removal of the 32-bit updates of rb_time_t will be done in the next merge window" * tag 'trace-v6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Fix slowpath of interrupted event
2023-12-19drm/amd/display: dereference variable before checking for zeroJosip Pavic
[Why] Driver incorrectly checks if pointer variable OutBpp is null instead of if the value being pointed to is zero. [How] Dereference OutBpp before checking for a value of zero. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: get dprefclk ss info from integration info tableCharlene Liu
[why & how] we have two SSC_En: we get ssc_info from dce_info for MPLL_SSC_EN. we used to call VBIOS cmdtbl's smu_info's SS persentage for DPRECLK SS info, is used for DP AUDIO and VBIOS' smu_info table was from systemIntegrationInfoTable. since dcn35 VBIOS removed smu_info, driver need to use integrationInfotable directly. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Add case for dcn35 to support usb4 dmub hpd eventWayne Lin
[Why & how] Refactor dc_is_dmub_outbox_supported() a bit and add case for dcn35 to register dmub outbox notification irq to handle usb4 relevant hpd event. Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: disable FPO and SubVP for older DMUB versions on DCN32xHamza Mahfooz
There have recently been changes that break backwards compatibility, that were introduced into DMUB firmware (for DCN32x) concerning FPO and SubVP. So, since those are just power optimization features, we can just disable them unless the user is using a new enough version of DMUB firmware. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2870 Fixes: ed6e2782e974 ("drm/amd/display: For cursor P-State allow for SubVP") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Closes: https://lore.kernel.org/r/CABXGCsNRb0QbF2pKLJMDhVOKxyGD6-E+8p-4QO6FOWa6zp22_A@mail.gmail.com/ Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amdkfd: svm range always mapped flag not working on APUPhilip Yang
On gfx943 APU there is no VRAM and page migration, queue CWSR area, svm range with always mapped flag, is not mapped to GPU correctly. This works fine if retry fault on CWSR area can be recovered, but could cause deadlock if there is another retry fault recover waiting for CWSR to finish. Fix this by mapping svm range with always mapped flag to GPU with ACCESS attribute if XNACK ON. There is side effect, because all GPUs have ACCESS attribute by default on new svm range with XNACK on, the CWSR area will be mapped to all GPUs after this change. This side effect will be fixed with Thunk change to set CWSR svm range with ACCESS_IN_PLACE attribute on the GPU that user queue is created. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19Merge tag 'arc-6.7-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - build error for hugetlb, sparse and smatch fixes - removal of VIPT aliasing cache code * tag 'arc-6.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: add hugetlb definitions ARC: fix smatch warning ARC: fix spare error ARC: mm: retire support for aliasing VIPT D$ ARC: entry: move ARCompact specific bits out of entry.h ARC: entry: SAVE_ABI_CALLEE_REG: ISA/ABI specific helper
2023-12-19drm/amd/display: Revert " drm/amd/display: Use channel_width = 2 for vram ↵Alvin Lee
table 3.0" [Description] Revert commit fec05adc40c2 ("drm/amd/display: Use channel_width = 2 for vram table 3.0") Because the issue is being fixed from VBIOS side. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19i2c: rk3x: fix potential spinlock recursion on pollJensen Huang
Possible deadlock scenario (on reboot): rk3x_i2c_xfer_common(polling) -> rk3x_i2c_wait_xfer_poll() -> rk3x_i2c_irq(0, i2c); --> spin_lock(&i2c->lock); ... <rk3x i2c interrupt> -> rk3x_i2c_irq(0, i2c); --> spin_lock(&i2c->lock); (deadlock here) Store the IRQ number and disable/enable it around the polling transfer. This patch has been tested on NanoPC-T4. Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-12-19i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()Yang Yingliang
Add missing clk_disable_unprepare() and geni_se_resources_off() in the error path in geni_i2c_probe(). Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-12-19cifs: do not let cifs_chan_update_iface deallocate channelsShyam Prasad N
cifs_chan_update_iface is meant to check and update the server interface used for a channel when the existing server interface is no longer available. So far, this handler had the code to remove an interface entry even if a new candidate interface is not available. Allowing this leads to several corner cases to handle. This change makes the logic much simpler by not deallocating the current channel interface entry if a new interface is not found to replace it with. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-19cifs: fix a pending undercount of srv_countShyam Prasad N
The following commit reverted the changes to ref count the server struct while scheduling a reconnect work: 823342524868 Revert "cifs: reconnect work should have reference on server struct" However, a following change also introduced scheduling of reconnect work, and assumed ref counting. This change fixes that as well. Fixes umount problems like: [73496.157838] CPU: 5 PID: 1321389 Comm: umount Tainted: G W OE 6.7.0-060700rc6-generic #202312172332 [73496.157841] Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET67W (1.50 ) 12/15/2022 [73496.157843] RIP: 0010:cifs_put_tcp_session+0x17d/0x190 [cifs] [73496.157906] Code: 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc e8 4a 6e 14 e6 e9 f6 fe ff ff be 03 00 00 00 48 89 d7 e8 78 26 b3 e5 e9 e4 fe ff ff <0f> 0b e9 b1 fe ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 [73496.157908] RSP: 0018:ffffc90003bcbcb8 EFLAGS: 00010286 [73496.157911] RAX: 00000000ffffffff RBX: ffff8885830fa800 RCX: 0000000000000000 [73496.157913] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [73496.157915] RBP: ffffc90003bcbcc8 R08: 0000000000000000 R09: 0000000000000000 [73496.157917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [73496.157918] R13: ffff8887d56ba800 R14: 00000000ffffffff R15: ffff8885830fa800 [73496.157920] FS: 00007f1ff0e33800(0000) GS:ffff88887ba80000(0000) knlGS:0000000000000000 [73496.157922] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [73496.157924] CR2: 0000115f002e2010 CR3: 00000003d1e24005 CR4: 00000000003706f0 [73496.157926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [73496.157928] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [73496.157929] Call Trace: [73496.157931] <TASK> [73496.157933] ? show_regs+0x6d/0x80 [73496.157936] ? __warn+0x89/0x160 [73496.157939] ? cifs_put_tcp_session+0x17d/0x190 [cifs] [73496.157976] ? report_bug+0x17e/0x1b0 [73496.157980] ? handle_bug+0x51/0xa0 [73496.157983] ? exc_invalid_op+0x18/0x80 [73496.157985] ? asm_exc_invalid_op+0x1b/0x20 [73496.157989] ? cifs_put_tcp_session+0x17d/0x190 [cifs] [73496.158023] ? cifs_put_tcp_session+0x1e/0x190 [cifs] [73496.158057] __cifs_put_smb_ses+0x2b5/0x540 [cifs] [73496.158090] ? tconInfoFree+0xc2/0x120 [cifs] [73496.158130] cifs_put_tcon.part.0+0x108/0x2b0 [cifs] [73496.158173] cifs_put_tlink+0x49/0x90 [cifs] [73496.158220] cifs_umount+0x56/0xb0 [cifs] [73496.158258] cifs_kill_sb+0x52/0x60 [cifs] [73496.158306] deactivate_locked_super+0x32/0xc0 [73496.158309] deactivate_super+0x46/0x60 [73496.158311] cleanup_mnt+0xc3/0x170 [73496.158314] __cleanup_mnt+0x12/0x20 [73496.158330] task_work_run+0x5e/0xa0 [73496.158333] exit_to_user_mode_loop+0x105/0x130 [73496.158336] exit_to_user_mode_prepare+0xa5/0xb0 [73496.158338] syscall_exit_to_user_mode+0x29/0x60 [73496.158341] do_syscall_64+0x6c/0xf0 [73496.158344] ? syscall_exit_to_user_mode+0x37/0x60 [73496.158346] ? do_syscall_64+0x6c/0xf0 [73496.158349] ? exit_to_user_mode_prepare+0x30/0xb0 [73496.158353] ? syscall_exit_to_user_mode+0x37/0x60 [73496.158355] ? do_syscall_64+0x6c/0xf0 Reported-by: Robert Morris <rtm@csail.mit.edu> Fixes: 705fc522fe9d ("cifs: handle when server starts supporting multichannel") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-19Revert "nvme-fc: fix race between error recovery and creating association"Keith Busch
The commit was identified to might sleep in invalid context and is blocking regression testing. This reverts commit ee6fdc5055e916b1dd497f11260d4901c4c1e55e. Link: https://lore.kernel.org/linux-nvme/hkhl56n665uvc6t5d6h3wtx7utkcorw4xlwi7d2t2bnonavhe6@xaan6pu43ap6/ Link: https://lists.infradead.org/pipermail/linux-nvme/2023-December/043756.html Reported-by: Daniel Wagner <dwagner@suse.de> Reported-by: Maurizio Lombardi <mlombard@redhat.com> Cc: Michael Liang <mliang@purestorage.com> Tested-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-19s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-12-19fs: cifs: Fix atime update checkZizhi Wo
Commit 9b9c5bea0b96 ("cifs: do not return atime less than mtime") indicates that in cifs, if atime is less than mtime, some apps will break. Therefore, it introduce a function to compare this two variables in two places where atime is updated. If atime is less than mtime, update it to mtime. However, the patch was handled incorrectly, resulting in atime and mtime being exactly equal. A previous commit 69738cfdfa70 ("fs: cifs: Fix atime update check vs mtime") fixed one place and forgot to fix another. Fix it. Fixes: 9b9c5bea0b96 ("cifs: do not return atime less than mtime") Cc: stable@vger.kernel.org Signed-off-by: Zizhi Wo <wozizhi@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-19smb: client: fix potential OOB in smb2_dump_detail()Paulo Alcantara
Validate SMB message with ->check_message() before calling ->calc_smb_size(). This fixes CVE-2023-6610. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218219 Cc; stable@vger.kernel.org Signed-off-by: Paulo Alcantara <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-19ASoC: fsl_sai: Fix channel swap issue on i.MX8MPShengjiu Wang
When flag mclk_with_tere and mclk_direction_output enabled, The SAI transmitter or receiver will be enabled in very early stage, that if FSL_SAI_xMR is set by previous case, for example previous case is one channel, current case is two channels, then current case started with wrong xMR in the beginning, then channel swap happen. The patch is to clear xMR in hw_free() to avoid such channel swap issue. Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: hdmi-codec: fix missing report for jack initial statusJerome Brunet
This fixes a problem introduced while fixing ELD reporting with no jack set. Most driver using the hdmi-codec will call the 'plugged_cb' callback directly when registered to report the initial state of the HDMI connector. With the commit mentionned, this occurs before jack is ready and the initial report is lost for platforms actually providing a jack for HDMI. Fix this by storing the hdmi connector status regardless of jack being set or not and report the last status when jack gets set. With this, the initial state is reported correctly even if it is disconnected. This was not done initially and is also a fix. Fixes: 15be353d55f9 ("ASoC: hdmi-codec: register hpd callback on component probe") Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/ Cc: Hsin-Yi Wang <hsinyi@google.com> Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19Merge branch ↵Paolo Abeni
'check-vlan-filter-feature-in-vlan_vids_add_by_dev-and-vlan_vids_del_by_dev' Liu Jian says: ==================== check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() v2->v3: Filter using vlan_hw_filter_capable(). Add one basic test. ==================== Link: https://lore.kernel.org/r/20231216075219.2379123-1-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19selftests: add vlan hw filter testsLiu Jian
Add one basic vlan hw filter test. Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19net: check vlan filter feature in vlan_vids_add_by_dev() and ↵Liu Jian
vlan_vids_del_by_dev() I got the below warning trace: WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0 Call Trace: rtnl_dellink rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg __sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64 entry_SYSCALL_64_after_hwframe It can be repoduced via: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode 0 ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 ip netns exec ns1 ip link set bond_slave_1 master bond0 [1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off [2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0 [3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0 [4] ip netns exec ns1 ip link set bond_slave_1 nomaster [5] ip netns exec ns1 ip link del veth2 ip netns del ns1 This is all caused by command [1] turning off the rx-vlan-filter function of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands [2] [3] add the same vid to slave and master respectively, causing command [4] to empty slave->vlan_info. The following command [5] triggers this problem. To fix this problem, we should add VLAN_FILTER feature checks in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect addition or deletion of vlan_vid information. Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19net: hns3: add new maintainer for the HNS3 ethernet driverJijie Shao
Jijie Shao will be responsible for maintaining the hns3 driver's code in the future, so add Jijie to the hns3 driver's matainer list. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20231216070413.233668-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 00:00:37 +0000