summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-24perf tools: Fix the code to strip command nameJiri Olsa
Recent commit broke command name strip in perf_event__get_comm_ids function. It replaced left to right search for '\n' with rtrim, which actually does right to left search. It occasionally caught earlier '\n' and kept trash in the command name. Keeping the ltrim, but moving back the left to right '\n' search instead of the rtrim. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Taeung Song <treeze.taeung@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Yao Jin <yao.jin@linux.intel.com> Fixes: bdd97ca63faa ("perf tools: Refactor the code to strip command name with {l,r}trim()") Link: http://lkml.kernel.org/r/20170420092430.29657-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24tools arch x86: Sync cpufeatures.hArnaldo Carvalho de Melo
To catch changes made in: 90218ac77d05 ("x86/cpufeature: Detect CPUID faulting support") No changes needed in the tools using this file at this time. Cc: Kyle Huey <me@kylehuey.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/n/tip-qiqsj5qg2ljbsbfre2zaf9v4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24tools arch: Sync arch/x86/lib/memcpy_64.S with the kernelArnaldo Carvalho de Melo
Just a minor fix done in: Fixes: 26a37ab319a2 ("x86/mce: Fix copy/paste error in exception table entries") Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/n/tip-ni9jzdd5yxlail6pq8cuexw2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24tools: Update asm-generic/mman-common.h copy from the kernelArnaldo Carvalho de Melo
To get the changes in the commit Fixes: 3209f68b3ca4 ("statx: Include a mask for stx_attributes in struct statx") Silencing this perf build warning: Warning: tools/include/uapi/linux/stat.h differs from kernel No need to change the statx syscall beautifiers in 'perf trace' at this time. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Ahern <dsahern@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-y8bgiyzuvura62lffvh1zbg9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Use just forward declarations for struct thread where possibleArnaldo Carvalho de Melo
Removing various instances of unnecessary includes, reducing the maze of header dependencies. Link: http://lkml.kernel.org/n/tip-hwu6eyuok9pc57alookyzmsf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Add the right header to obtain PERF_ALIGN()Arnaldo Carvalho de Melo
The util/event.h header needs PERF_ALIGN(), but wasn't including linux/kernel.h, where it is defined, instead it was getting it by luck by including map.h, which it doesn't need at all. Fix it by including the right header. Link: http://lkml.kernel.org/n/tip-nf3t9blzm5ncoxsczi8oy9mx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove poll.h and wait.h from util.hArnaldo Carvalho de Melo
Not needed in this header, added to the places that need poll(), wait() and a few other prototypes. Link: http://lkml.kernel.org/n/tip-i39c7b6xmo1vwd9wxp6fmkl0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove string.h, unistd.h and sys/stat.h from util.hArnaldo Carvalho de Melo
Not needed in this header, added to the places that need FILE, putchar(), access() and a few other prototypes. Link: http://lkml.kernel.org/n/tip-xxtdsl6nsna82j7puwbdjqhs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove stale prototypes from builtin.hArnaldo Carvalho de Melo
Some, like prune_packed_objects() are clearly git specific, others don't have implementations and some are used in just one place, make them static. Link: http://lkml.kernel.org/n/tip-faj3c5dnttf3hurv4pujut8n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove string.h from util.hArnaldo Carvalho de Melo
Not needed in this header, added to the places that need strdup, strcmp and a few other prototypes. Link: http://lkml.kernel.org/n/tip-t24yy85xnlv55kyosrum2ubs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove sys/ioctl.h from util.hArnaldo Carvalho de Melo
Not needed in this header, added to the places that need 'struct winsize' and the ioctl defines. Link: http://lkml.kernel.org/n/tip-2pznlli3146y4242otlcm70m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove a few more needless includes from util.hArnaldo Carvalho de Melo
Link: http://lkml.kernel.org/n/tip-sb2zu21d6h42e5qnsrtl6wuu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Include sys/param.h where neededArnaldo Carvalho de Melo
As it is going away from util.h, where it is not needed. This is mostly for things like MAXPATHLEN, MAX() and MIN(), these later two probably should go away in favor of its kernel sources replacements. Link: http://lkml.kernel.org/n/tip-z1666f3fl3fqobxvjr5o2r39@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf callchain: Move callchain specific routines from util.[ch]Arnaldo Carvalho de Melo
Where they belong, no point in leaving those in the generic "util" files. Link: http://lkml.kernel.org/n/tip-ljx3iiip1hlfa7a7apjem7ph@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24net: tc35815: move free after the dereferenceDan Carpenter
We dereference "skb" to get "skb->len" so we should probably do that step before freeing the skb. Fixes: eea221ce4880 ("tc35815 driver update (take 2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net/mlx5e: Fix race in mlx5e_sw_stats and mlx5e_vport_statsMartin KaFai Lau
We have observed a sudden spike in rx/tx_packets and rx/tx_bytes reported under /proc/net/dev. There is a race in mlx5e_update_stats() and some of the get-stats functions (the one that we hit is the mlx5e_get_stats() which is called by ndo_get_stats64()). In particular, the very first thing mlx5e_update_sw_counters() does is 'memset(s, 0, sizeof(*s))'. For example, if mlx5e_get_stats() is unlucky at one point, rx_bytes and rx_packets could be 0. One second later, a normal (and much bigger than 0) value will be reported. This patch is to use a 'struct mlx5e_sw_stats temp' to avoid a direct memset zero on priv->stats.sw. mlx5e_update_vport_counters() has a similar race. Hence, addressed together. However, memset zero is removed instead because it is not needed. I am lucky enough to catch this 0-reset in rx multicast: eth0: 41457665 76804 70 0 0 70 0 47085 15586634 87502 3 0 0 0 3 0 eth0: 41459860 76815 70 0 0 70 0 47094 15588376 87516 3 0 0 0 3 0 eth0: 41460577 76822 70 0 0 70 0 0 15589083 87521 3 0 0 0 3 0 eth0: 41463293 76838 70 0 0 70 0 47108 15595872 87538 3 0 0 0 3 0 eth0: 41463379 76839 70 0 0 70 0 47116 15596138 87539 3 0 0 0 3 0 v2: Remove memset zero from mlx5e_update_vport_counters() v1: Use temp and memcpy Fixes: 9218b44dcc05 ("net/mlx5e: Statistics handling refactoring") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24perf tools: Add compress.h for the *_decompress_to_file() headersArnaldo Carvalho de Melo
Out of util.h, the implementations were already in separate files, that are built conditionally. Link: http://lkml.kernel.org/n/tip-0ur7szxsb59f8758kfe63prb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf mem: Fix display of data source snoop indicationAndi Kleen
'perf mem report' doesn't display the data source snoop indication correctly. In the kernel API the definition is: #define PERF_MEM_SNOOP_NONE 0x02 /* no snoop */ #define PERF_MEM_SNOOP_HIT 0x04 /* snoop hit */ #define PERF_MEM_SNOOP_MISS 0x08 /* snoop miss */ but the table used by the perf tools exchanged "Hit" and "Miss": "None", "Miss", "Hit", Fix the table in perf. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20170419174940.13641-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf debug: Move dump_stack() and sighandler_dump_stack() to debug.hArnaldo Carvalho de Melo
Two more out of util.h. Link: http://lkml.kernel.org/n/tip-polkuxm1cpr06lbgue5pyqum@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf kvm: Make function only used by 'perf kvm' staticArnaldo Carvalho de Melo
No need to have this polluting util.h, it was polluted enough already. Link: http://lkml.kernel.org/n/tip-wfdidqlwbvi5y0s61kv6z2gn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24hwmon: (tmp103) Use SIMPLE_DEV_PM_OPS helper macroRahul Bedarkar
Replace ifdefs with SIMPLE_DEV_PM_OPS helper macro. Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-24lpfc revison 11.2.0.12James Smart
Update lpfc version to reflect this set of changes. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix Express lane queue creation.James Smart
The older sli4 adapters only supported the 64 byte WQE entry size. The new adapter (fw) support both 64 and 128 byte WQE entry sizies. The Express lane WQ was not being created with the 128 byte WQE sizes when it was supported. Not having the right WQE size created for the express lane work queue caused the the firmware to overwrite the lun indentifier in the FCP header. This patch correctly creates the express lane work queue with the supported size. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Update ABORT processing for NVMET.James Smart
The driver with nvme had this routine stubbed. Right now XRI_ABORTED_CQE is not handled and the FC NVMET Transport has a new API for the driver. Missing code path, new NVME abort API Update ABORT processing for NVMET There are 3 new FC NVMET Transport API/ template routines for NVMET: lpfc_nvmet_xmt_fcp_release This NVMET template callback routine called to release context associated with an IO This routine is ALWAYS called last, even if the IO was aborted or completed in error. lpfc_nvmet_xmt_fcp_abort This NVMET template callback routine called to abort an exchange that has an IO in progress nvmet_fc_rcv_fcp_req When the lpfc driver receives an ABTS, this NVME FC transport layer callback routine is called. For this case there are 2 paths thru the driver: the driver either has an outstanding exchange / context for the XRI to be aborted or not. If not, a BA_RJT is issued otherwise a BA_ACC NVMET Driver abort paths: There are 2 paths for aborting an IO. The first one is we receive an IO and decide not to process it because of lack of resources. An unsolicated ABTS is immediately sent back to the initiator as a response. lpfc_nvmet_unsol_fcp_buffer lpfc_nvmet_unsol_issue_abort (XMIT_SEQUENCE_WQE) The second one is we sent the IO up to the NVMET transport layer to process, and for some reason the NVME Transport layer decided to abort the IO before it completes all its phases. For this case there are 2 paths thru the driver: the driver either has an outstanding TSEND/TRECEIVE/TRSP WQE or no outstanding WQEs are present for the exchange / context. lpfc_nvmet_xmt_fcp_abort if (LPFC_NVMET_IO_INP) lpfc_nvmet_sol_fcp_issue_abort (ABORT_WQE) lpfc_nvmet_sol_fcp_abort_cmp else lpfc_nvmet_unsol_fcp_issue_abort lpfc_nvmet_unsol_issue_abort (XMIT_SEQUENCE_WQE) lpfc_nvmet_unsol_fcp_abort_cmp Context flags: LPFC_NVMET_IOP - his flag signifies an IO is in progress on the exchange. LPFC_NVMET_XBUSY - this flag indicates the IO completed but the firmware is still busy with the corresponding exchange. The exchange should not be reused until after a XRI_ABORTED_CQE is received for that exchange. LPFC_NVMET_ABORT_OP - this flag signifies an ABORT_WQE was issued on the exchange. LPFC_NVMET_CTX_RLS - this flag signifies a context free was requested, but we are deferring it due to an XBUSY or ABORT in progress. A ctxlock is added to the context structure that is used whenever these flags are set/read within the context of an IO. The LPFC_NVMET_CTX_RLS flag is only set in the defer_relase routine when the transport has resolved all IO associated with the buffer. The flag is cleared when the CTX is associated with a new IO. An exchange can has both an LPFC_NVMET_XBUSY and a LPFC_NVMET_ABORT_OP condition active simultaneously. Both conditions must complete before the exchange is freed. When the abort callback (lpfc_nvmet_xmt_fcp_abort) is envoked: If there is an outstanding IO, the driver will issue an ABORT_WQE. This should result in 3 completions for the exchange: 1) IO cmpl with XB bit set 2) Abort WQE cmpl 3) XRI_ABORTED_CQE cmpl For this scenerio, after completion #1, the NVMET Transport IO rsp callback is called. After completion #2, no action is taken with respect to the exchange / context. After completion #3, the exchange context is free for re-use on another IO. If there is no outstanding activity on the exchange, the driver will send a ABTS to the Initiator. Upon completion of this WQE, the exchange / context is freed for re-use on another IO. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix implicit logo and RSCN handling for NVMETJames Smart
NVMET didn't have any RSCN handling at all and would not execute implicit LOGO when receiving a PLOGI from an rport that NVMET had in state UNMAPPED. Clean up the logic in lpfc_nlp_state_cleanup for initiators (FCP and NVME). NVMET should not respond to RSCN including allocating new ndlps so this code was conditionalized when nvmet_support is true. The check for NLP_RCV_PLOGI in lpfc_setup_disc_node was moved below the check for nvmet_support to allow the NVMET to recover initiator nodes correctly. The implicit logo was introduced with lpfc_rcv_plogi when NVMET gets a PLOGI on an ndlp in UNMAPPED state. The RSCN handling was modified to not respond to an RSCN in NVMET. Instead NVMET sends a GID_FT and determines if an NVMEP_INITIATOR it has is UNMAPPED but no longer in the zone membership. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Add Fabric assigned WWN support.James Smart
Adding support for Fabric assigned WWPN and WWNN. Firmware sends first FLOGI to fabric with vendor version changes. On link up driver gets updated service parameter with FAWWN assigned port name. Driver sends 2nd FLOGI with updated fawwpn and modifies the vport->fc_portname in driver. Note: Soft wwpn will not be allowed when fawwpn is enabled. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix max_sgl_segments settings for NVME / NVMETJames Smart
Cannot set NVME segment counts to a large number The existing module parameter lpfc_sg_seg_cnt is used for both SCSI and NVME. Limit the module parameter lpfc_sg_seg_cnt to 128 with the default being 64 for both NVME and NVMET, assuming NVME is enabled in the driver for that port. The driver will set max_sgl_segments in the NVME/NVMET template to lpfc_sg_seg_cnt + 1. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix crash after issuing lip resetJames Smart
When RPI is not available, driver sends WQE with invalid RPI value and rejected by HBA. lpfc 0000:82:00.3: 1:3154 BLS ABORT RSP failed, data: x3/xa0320008 and lpfc :2753 PLOGI failure DID:FFFFFA Status:x3/xa0240008 In this case, driver accesses rpi_ids array out of bounds. Fix: Check return value of lpfc_sli4_alloc_rpi(). Do not allocate lpfc_nodelist entry if RPI is not available. When RPI is not available, we will get discovery timeouts and command drops for some of the vports as seen below. lpfc :0273 Unexpected discovery timeout, vport State x0 lpfc :0230 Unexpected timeout, hba link state x5 lpfc :0111 Dropping received ELS cmd Data: x0 xc90c55 x0 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix driver load issues when MRQ=8James Smart
The symptom is that the driver will fail to login to the fabric. The reason is because it is out of iocb resources. There is a one to one relationship between MRQs (receive buffers for NVMET-FC) and iocbs and the default number of IOCBs was not accounting for the number of MRQs that were being created. This fix aligns the number of MRQ resources with the total resources so that it can handle fabric events when needed. Also the initialization of ctxlock to be on FCP commands, NOT LS commands. And modified log messages so that the log output can be correlated with the analyzer trace. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Remove hba lock from NVMET issue WQE.James Smart
Unnecessary lock is taken. ring lock should be sufficient to protect the work queue submission. This was noticed when doing performance testing. The hbalock is not needed to issue io to the nvme work queue. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix nvme initiator handling when not enabled.James Smart
Fix nvme initiator handline when CONFIG_LPFC_NVME_INITIATOR is not enabled. With update nvme upstream driver sources, loading the driver with nvme enabled resulting in this Oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: lpfc_nvme_update_localport+0x23/0xd0 [lpfc] PGD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 10256 Comm: lpfc_worker_0 Tainted Hardware name: ... task: ffff881028191c40 task.stack: ffff880ffdf00000 RIP: 0010:lpfc_nvme_update_localport+0x23/0xd0 [lpfc] RSP: 0018:ffff880ffdf03c20 EFLAGS: 00010202 Cause: As the initiator driver completes discovery at different stages, it call lpfc_nvme_update_localport to hint that the DID and role may have changed. In the implementation of lpfc_nvme_update_localport, the driver was not validating the localport or the lport during the execution of the update_localport routine. With the recent upstream additions to the driver, the create_localport routine didn't run and so the localport was NULL causing the page-fault Oops. Fix: Add the CONFIG_LPFC_NVME_INITIATOR preprocessor inclusions to lpfc_nvme_update_localport to turn off all routine processing when the running kernel does not have NVME configured. Add NULL pointer checks on the localport and lport in lpfc_nvme_update_localport and dump messages if they are NULL and just exit. Also one alingment issue fixed. Repalces the ifdef with the IS_ENABLED macro. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix driver usage of 128B WQEs when WQ_CREATE is V1.James Smart
There are two versions of a structure for queue creation and setup that the driver shares with FW. The driver was only treating as version 0. Verify WQ_CREATE with 128B WQEs in V0 and V1. Code review of another bug showed the driver passing 128B WQEs and 8 pages in WQ CREATE and V0. Code inspection/instrumentation showed that the driver uses V0 in WQ_CREATE and if the caller passes queue->entry_size 128B, the driver sets the hdr_version to V1 so all is good. When I tested the V1 WQ_CREATE, the mailbox failed causing the driver to unload. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix driver unload/reload operation.James Smart
There are couple of different load/unload issues fixed with this patch. One of the issues was reported by Junichi Nomura, a patch was submitted by Johannes Thumsrhirn which did fix one of the problems but the fix in this patch separates the pring free from the queue free and does not set the parameter passed in to NULL. issues: (1) driver could not be unloaded and reloaded without some Oops or Panic occurring. (2) The driver was panicking because of a corruption in the Memory Manager when the iocb list was getting allocated. Root cause for the memory corruption was a double free of the Work Queue ring pointer memory - Freed once in the lpfc_sli4_queue_free when the CQ was destroyed and again in lpfc_sli4_queue_free when the WQ was destroyed. The pring free and the queue free were separated, the pring free was moved to the wq destroy routine because it a better fit logically to delete the ring with the wq. The checkpatch flagged several alignmenet issues that were also corrected with this patch. The mboxq was never initialed correctly before it was used by the driver this patch corrects that issue. Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Junichi Nomura <j-nomura@ce.jp.nec.com>
2017-04-24Fix PRLI ACC rsp for NVMEJames Smart
PRLI ACC from target is FCP oriented. Word 0 was wrong. This was noticed by another nvmet-fc vendor that was testing the lpfc nvme-fc initiator with their target. Verified results with analyzer. PRLI BC B5 56 56 22 61 04 00 00 61 00 00 01 29 00 00 20 00 00 00 00 10 FF FF 00 00 00 00 20 14 00 18 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 9C D8 DA C9 BC 95 75 75 ACC BC B5 56 56 23 61 00 00 00 61 04 00 01 98 00 00 30 00 00 00 00 10 00 18 00 00 00 00 02 14 00 18 28 00 01 00 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 00 B0 6B 07 57 BC B5 75 75 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix extra line print in rqpair debug print.James Smart
An extra blank line was being added the the rqpair printing. Remove the extra line feed. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Remove NULL ptr check before kfree.James Smart
The check for NULL ptr is not necessary, kfree will check it. Removing NULL ptr check. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Remove unused defines for NVME PostBuf.James Smart
These defines for the posting of buffers for nvmet target were not used. Removing the unused defines. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix spelling in comments.James Smart
Comment should have said Repost. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Add debug messages for nvme/fcp resource allocation.James Smart
The xri resources are split into pools for NVME and FCP IO when NVME is enabled. There was not message in the log that identified this allocation. Added debug message to log XRI split. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix log message in completion path.James Smart
In the lpfc_nvme_io_cmd_wqe_cmpl routine the driver was printing two pointers and the DID for the rport whenever an IO completed on a now that had transitioned to a non active state. There is no need to print the node pointer address for a node that is not active the DID should be enough to debug. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix rejected nvme LS Req.James Smart
In this case, the NVME initiator is sending an LS REQ command on an NDLP that is not MAPPED. The FW rejects it. The lpfc_nvme_ls_req routine checks for a NULL ndlp pointer but does not check the NDLP state. This allows the routine to send an LS IO when the ndlp is disconnected. Check the ndlp for NULL, actual node, Target and MAPPED or Initiator and UNMAPPED. This avoids Fabric nodes getting the Create Association or Create Connection commands. Initiators are free to Reject either Create. Also some of the messages numbers in lpfc_nvme_ls_req were changed because they were already used in other log messages. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Fix nvme unregister port timeout.James Smart
During some link event testing it was observed that the wait_for_completion_timeout in the lpfc_nvme_unregister_port was timing out all the time. The initiator is claiming the nvme_fc_unregister_remoteport upcall is not completing the unregister in the time allotted. [ 2186.151317] lpfc 0000:07:00.0: 0:(0):6169 Unreg nvme wait failed 0 The wait_for_completion_timeout returns 0 when the wait has been outstanding for the jiffies passed by the caller. In this error message, the nvme initiator passed value 5 - meaning 5 jiffies - and this is just wrong. Calculate 5 seconds in Jiffies and pass that value from the current jiffies. Also the log message for the unregister timeout was reduced because timeout failure is the same as timeout. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24Standardize nvme SGL segment countJames Smart
Standardize default SGL segment count for nvme target and initiator The driver needs to make them the same for clarity. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24nvmet-fcloop: mark two symbols staticChristoph Hellwig
Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24nvmet-fc: properly endian swap sq_headChristoph Hellwig
Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24nvmet-fc: mark the sqhd field as __le16Christoph Hellwig
That's what it's used as. Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24nvmet-fc: fix endianess annoations for nvmet_fc_format_rsp_hdrChristoph Hellwig
The passed in desc_len is a big endian value, so mark it as such. Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24nvmet-fc: mark nvmet_fc_handle_fcp_rqst staticChristoph Hellwig
Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24nvme-fc: mark two symbols staticChristoph Hellwig
Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-04-24nvme_fc: add controller reset supportJames Smart
This patch actually does quite a few things. When looking to add controller reset support, the organization modeled after rdma was very fragmented. rdma duplicates the reset and teardown paths and does different things to the block layer on the two paths. The code to build up the controller is also duplicated between the initial creation and the reset/error recovery paths. So I decided to make this sane. I reorganized the controller creation and teardown so that there is a connect path and a disconnect path. Initial creation obviously uses the connect path. Controller teardown will use the disconnect path, followed last access code. Controller reset will use the disconnect path to stop operation, and then the connect path to re-establish the controller. Along the way, several things were fixed - aens were not properly set up. They are allocated differently from the per-request structure on the blk queues. - aens were oddly torn down. the prior patch corrected to abort, but we still need to dma unmap and free relative elements. - missed a few ref counting points: in aen completion and on i/o's that fail - controller initial create failure paths were still confused vs teardown before converting to ref counting vs after we convert to refcounting. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit (git 2.34.1) at 2025-07-16 08:12:47 +0000