Age | Commit message (Collapse) | Author |
|
Although the Apple M2 family of CPUs can have HCR_EL2.NV1 being
set and clear, with the change in trap behaviour being OK, they
explode spectacularily on an EL2 S1 page table using the nVHE
format. This is no good.
Let's pretend this HW doesn't have NV1, and move along.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240122181344.258974-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
If NV1 isn't supported on a system, make sure we always evaluate
the guest's HCR_EL2.E2H as RES1, irrespective of what the guest
may have written there.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240122181344.258974-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We can now expose ID_AA64MMFR4_EL1 to guests, and let NV guests
understand that they cannot really switch HCR_EL2.E2H to 0 on
some platforms.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240122181344.258974-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
For CPUs that have ID_AA64MMFR4_EL1.E2H0 as negative, it is important
to avoid the boot path that sets HCR_EL2.E2H=0. Fortunately, we
already have this path to cope with fruity CPUs.
Tweak init_el2 to look at ID_AA64MMFR4_EL1.E2H0 first.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240122181344.258974-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
A variant of FEAT_E2H0 not being implemented exists in the form of
HCR_EL2.E2H being RES1 *and* HCR_EL2.NV1 being RES0 (indicating that
only VHE is supported on the host and nested guests).
Add the necessary infrastructure for this new CPU capability.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240122181344.258974-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add ID_AA64MMFR4_EL1 to the list of idregs the kernel knows about,
and describe the E2H0 field.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240122181344.258974-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
ARMv9.5 has infroduced ID_AA64MMFR4_EL1 with a bunch of new features.
Add the corresponding layout.
This is extracted from the public ARM SysReg_xml_A_profile-2023-09
delivery, timestamped d55f5af8e09052abe92a02adf820deea2eaed717.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Link: https://lore.kernel.org/r/20240122181344.258974-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When a field gets overriden, the kernel indicates the result of
the override in dmesg. This works well with unsigned fields, but
results in a pretty ugly output when the field is signed.
Truncate the field to its width before displaying it.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240122181344.258974-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Although we've had signed values for some features such as PMUv3
and FP, the code that handles the comparaison with some limit
has a couple of annoying issues:
- the min_field_value is always unsigned, meaning that we cannot
easily compare it with a negative value
- it is not possible to have a range of values, let alone a range
of negative values
Fix this by:
- adding an upper limit to the comparison, defaulting to all bits
being set to the maximum positive value
- ensuring that the signess of the min and max values are taken into
account
A ARM64_CPUID_FIELDS_NEG() macro is provided for signed features, but
nothing is using it yet.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240122181344.258974-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
A common idiom is to compose a tupple (reg, field, val) into
a symbol matching an autogenerated definition.
Add a help performing the concatenation and replace it when
open-coded implementations exist.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240122181344.258974-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
|
|
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
|
|
Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.
$ cat test.sh
prog=bcachefs
$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots
while true;do
$prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
sleep 1s
done
$ cat /etc/mongodb.conf
systemLog:
destination: file
logAppend: true
path: /mnt/data/mongod.log
storage:
dbPath: /mnt/data/
lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
which lock already depends on the new lock.
[ 3437.456553]
the existing dependency chain (in reverse order) is:
[ 3437.457054]
-> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507] down_read+0x3e/0x170
[ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206] __x64_sys_ioctl+0x93/0xd0
[ 3437.458498] do_syscall_64+0x42/0xf0
[ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
-> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615] down_read+0x3e/0x170
[ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686] notify_change+0x1f1/0x4a0
[ 3437.461283] do_truncate+0x7f/0xd0
[ 3437.461555] path_openat+0xa57/0xce0
[ 3437.461836] do_filp_open+0xb4/0x160
[ 3437.462116] do_sys_openat2+0x91/0xc0
[ 3437.462402] __x64_sys_openat+0x53/0xa0
[ 3437.462701] do_syscall_64+0x42/0xf0
[ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
-> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843] down_write+0x3b/0xc0
[ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493] vfs_write+0x21b/0x4c0
[ 3437.464653] ksys_write+0x69/0xf0
[ 3437.464839] do_syscall_64+0x42/0xf0
[ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
-> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471] __lock_acquire+0x1455/0x21b0
[ 3437.465656] lock_acquire+0xc6/0x2b0
[ 3437.465822] mnt_want_write+0x46/0x1a0
[ 3437.465996] filename_create+0x62/0x190
[ 3437.466175] user_path_create+0x2d/0x50
[ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617] __x64_sys_ioctl+0x93/0xd0
[ 3437.466791] do_syscall_64+0x42/0xf0
[ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
other info that might help us debug this:
[ 3437.469670] 2 locks held by bcachefs/35533:
other info that might help us debug this:
[ 3437.467507] Chain exists of:
sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48
[ 3437.467979] Possible unsafe locking scenario:
[ 3437.468223] CPU0 CPU1
[ 3437.468405] ---- ----
[ 3437.468585] rlock(&type->s_umount_key#48);
[ 3437.468758] lock(&c->snapshot_create_lock);
[ 3437.469030] lock(&type->s_umount_key#48);
[ 3437.469291] rlock(sb_writers#10);
[ 3437.469434]
*** DEADLOCK ***
[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795] <TASK>
[ 3437.471884] dump_stack_lvl+0x57/0x90
[ 3437.472035] check_noncircular+0x132/0x150
[ 3437.472202] __lock_acquire+0x1455/0x21b0
[ 3437.472369] lock_acquire+0xc6/0x2b0
[ 3437.472518] ? filename_create+0x62/0x190
[ 3437.472683] ? lock_is_held_type+0x97/0x110
[ 3437.472856] mnt_want_write+0x46/0x1a0
[ 3437.473025] ? filename_create+0x62/0x190
[ 3437.473204] filename_create+0x62/0x190
[ 3437.473380] user_path_create+0x2d/0x50
[ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819] ? lock_acquire+0xc6/0x2b0
[ 3437.474002] ? __fget_files+0x2a/0x190
[ 3437.474195] ? __fget_files+0xbc/0x190
[ 3437.474380] ? lock_release+0xc5/0x270
[ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090] __x64_sys_ioctl+0x93/0xd0
[ 3437.475277] do_syscall_64+0x42/0xf0
[ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================
In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.
Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().
Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:
[ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[ 406.830676 ] #PF: supervisor read access in kernel mode
[ 406.831643 ] #PF: error_code(0x0000) - not-present page
[ 406.832487 ] PGD 0 P4D 0
[ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90
[ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 406.835796 ] RIP: 0010:kfree+0x62/0x140
[ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[ 406.841464 ] Call Trace:
[ 406.841583 ] <TASK>
[ 406.841682 ] ? __die+0x1f/0x70
[ 406.841828 ] ? page_fault_oops+0x159/0x470
[ 406.842014 ] ? fixup_exception+0x22/0x310
[ 406.842198 ] ? exc_page_fault+0x1ed/0x200
[ 406.842382 ] ? asm_exc_page_fault+0x22/0x30
[ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs]
[ 406.842842 ] ? kfree+0x62/0x140
[ 406.842988 ] ? kfree+0x104/0x140
[ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs]
[ 406.843390 ] kobject_put+0xb7/0x170
[ 406.843552 ] deactivate_locked_super+0x2f/0xa0
[ 406.843756 ] cleanup_mnt+0xba/0x150
[ 406.843917 ] task_work_run+0x59/0xa0
[ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0
[ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40
[ 406.844510 ] do_syscall_64+0x4e/0xf0
[ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 406.844907 ] RIP: 0033:0x7f0a2664e4fb
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.
But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also print out the data_opts, so that we can see what specifically is
being done to an extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It appears this was accidentally deleted at some point - also, do a bit
of cleanup.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.
This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Some (buggy!) compilers have issues with this.
Fixes: https://github.com/koverstreet/bcachefs/issues/625
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|