| Age | Commit message (Collapse) | Author |
|---|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
1) netlink socket notifier might win race to release objects that are
already pending to be released via commit release path, reported by
syzbot.
2) No need to postpone flow rule release to commit release path, this
triggered the syzbot report, complementary fix to previous patch.
3) Use explicit signed chars in IPVS to unbreak arm, from Jason A. Donenfeld.
4) Missing check for proc entry creation failure in IPVS, from Zhengchao Shao.
5) Incorrect error path handling when BPF NAT fails to register, from
Chen Zhongjin.
6) Prevent huge memory allocation in ipset hash types, from Jozsef Kadlecsik.
Except the incorrect BPF NAT error path which is broken in 6.1-rc, anything
else has been broken for several releases.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: enforce documented limit to prevent allocating huge memory
netfilter: nf_nat: Fix possible memory leak in nf_nat_init()
ipvs: fix WARNING in ip_vs_app_net_cleanup()
ipvs: fix WARNING in __ip_vs_cleanup_batch()
ipvs: use explicitly signed chars
netfilter: nf_tables: release flow rule object from commit path
netfilter: nf_tables: netlink notifier might race to release objects
====================
Link: https://lore.kernel.org/r/20221102184659.2502-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth 2022-11-02
- Fix memory leak in hci_vhci driver
- Fix handling of skb on virtio_bt driver
- Fix accepting connection for invalid L2CAP PSM
- Fix attemting to access uninitialized memory
- Fix use-after-free in l2cap_reassemble_sdu
- Fix use-after-free in l2cap_conn_del
- Fix handling of destination address type for CIS
- Fix not restoring ISO buffer count on disconnect
* tag 'for-net-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
====================
Link: https://lore.kernel.org/r/20221102235927.3324891-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On l2cap_parse_conf_req the variable efs is only initialized if
remote_efs has been set.
CVE: CVE-2022-42895
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
l2cap_global_chan_by_psm shall not return fixed channels as they are not
meant to be connected by (S)PSM.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
page 1059:
Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges
CVE: CVE-2022-42896
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
When disconnecting an ISO link the controller may not generate
HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in
hci_conn_del otherwise the host would assume they are still in use and
would not be able to use all the buffers available.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Frédéric Danis <frederic.danis@collabora.com>
|
|
Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810d81ac00 (size 240):
[...]
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418
[<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline]
[<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline]
[<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline]
[<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511
[<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline]
[<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline]
[<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578
[<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631
[<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================
HCI core will uses hci_rx_work() to process frame, which is queued to
the hdev->rx_q tail in hci_recv_frame() by HCI driver.
Yet the problem is that, HCI core may not free the skb after handling
ACL data packets. To be more specific, when start fragment does not
contain the L2CAP length, HCI core just copies skb into conn->rx_skb and
finishes frame process in l2cap_recv_acldata(), without freeing the skb,
which triggers the above memory leak.
This patch solves it by releasing the relative skb, after processing
the above case in l2cap_recv_acldata().
Fixes: 4d7ea8ee90e4 ("Bluetooth: L2CAP: Fix handling fragmented length")
Link: https://lore.kernel.org/all/0000000000000d0b1905e6aaef64@google.com/
Reported-and-tested-by: syzbot+8f819e36e01022991cfa@syzkaller.appspotmail.com
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When l2cap_recv_frame() is invoked to receive data, and the cid is
L2CAP_CID_A2MP, if the channel does not exist, it will create a channel.
However, after a channel is created, the hold operation of the channel
is not performed. In this case, the value of channel reference counting
is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del()
invokes the close hook function of A2MP to release the channel. Then
l2cap_chan_unlock(chan) will trigger UAF issue.
The process is as follows:
Receive data:
l2cap_data_channel()
a2mp_channel_create() --->channel ref is 2
l2cap_chan_put() --->channel ref is 1
Triger event:
hci_error_reset()
hci_dev_do_close()
...
l2cap_disconn_cfm()
l2cap_conn_del()
l2cap_chan_hold() --->channel ref is 2
l2cap_chan_del() --->channel ref is 1
a2mp_chan_close_cb() --->channel ref is 0, release channel
l2cap_chan_unlock() --->UAF of channel
The detailed Call Trace is as follows:
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0
Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593
Workqueue: hci0 hci_error_reset
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
print_report.cold+0x2ba/0x719
kasan_report+0xb1/0x1e0
kasan_check_range+0x140/0x190
__mutex_unlock_slowpath+0xa6/0x5e0
l2cap_conn_del+0x404/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 7593:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0xa9/0xd0
l2cap_chan_create+0x40/0x930
amp_mgr_create+0x96/0x990
a2mp_channel_create+0x7d/0x150
l2cap_recv_frame+0x51b8/0x9a70
l2cap_recv_acldata+0xaa3/0xc00
hci_rx_work+0x702/0x1220
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
Freed by task 7593:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
____kasan_slab_free+0x167/0x1c0
slab_free_freelist_hook+0x89/0x1c0
kfree+0xe2/0x580
l2cap_chan_put+0x22a/0x2d0
l2cap_conn_del+0x3fc/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
By using skb_put we ensure that skb->tail is set
correctly. Currently, skb->tail is always zero, which
leads to errors, such as the following page fault in
rfcomm_recv_frame:
BUG: unable to handle page fault for address: ffffed1021de29ff
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751)
Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently
with dst_type being either ISO socket address type or the HCI type, but
these values cannot be mixed like this. Fix this by using only the HCI
type.
CIS connection dst_type was also not initialized in hci_bind_cis, even
though it is used in hci_conn_hash_lookup_cis to find existing
connections. Set the value in hci_bind_cis, so that existing CIS
connections are found e.g. when doing deferred socket connections, also
when dst_type is not 0 (ADDR_LE_DEV_PUBLIC).
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Fix the race condition between the following two flows that run in
parallel:
1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) ->
__sock_queue_rcv_skb.
2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram.
An SKB can be queued by the first flow and immediately dequeued and
freed by the second flow, therefore the callers of l2cap_reassemble_sdu
can't use the SKB after that function returns. However, some places
continue accessing struct l2cap_ctrl that resides in the SKB's CB for a
short time after l2cap_reassemble_sdu returns, leading to a
use-after-free condition (the stack trace is below, line numbers for
kernel 5.19.8).
Fix it by keeping a local copy of struct l2cap_ctrl.
BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169
Workqueue: hci0 hci_rx_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth
ret_from_fork (arch/x86/entry/entry_64.S:306)
</TASK>
Allocated by task 43169:
kasan_save_stack (mm/kasan/common.c:39)
__kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293)
__alloc_skb (net/core/skbuff.c:414)
l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth
l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth
hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth
process_one_work (kernel/workqueue.c:2289)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:306)
Freed by task 27920:
kasan_save_stack (mm/kasan/common.c:39)
kasan_set_track (mm/kasan/common.c:45)
kasan_set_free_info (mm/kasan/generic.c:372)
____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328)
slab_free_freelist_hook (mm/slub.c:1780)
kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553)
skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323)
bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth
l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth
sock_read_iter (net/socket.c:1087)
new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401)
vfs_read (fs/read_write.c:482)
ksys_read (fs/read_write.c:620)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u
Fixes: d2a7ac5d5d3a ("Bluetooth: Add the ERTM receive state machine")
Fixes: 4b51dae96731 ("Bluetooth: Add streaming mode receive and incoming packet classifier")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This mostly handles oddities with the serial port 8250_gsc.c driver.
Although the name suggests it's just for serial ports on the GSC bus
(e.g. in older PA-RISC machines), it handles serial ports on PA-RISC
PCI devices (e.g. on the SuperIO chip) as well.
Thus this renames the driver to 8250_parisc and fixes the config
dependencies.
The other change is a cleanup on how the device IDs of devices in a
PA-RISC machine are shown at startup"
* tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid printing the hardware path twice
parisc: Export iosapic_serial_irq() symbol for serial port driver
MAINTAINERS: adjust entry after renaming parisc serial driver
parisc: Use signed char for hardware path in pdc.h
parisc/serial: Rename 8250_gsc.c to 8250_parisc.c
parisc: Make 8250_gsc driver dependend on CONFIG_PARISC
|
|
Daniel Xu reported that the hash:net,iface type of the ipset subsystem does
not limit adding the same network with different interfaces to a set, which
can lead to huge memory usage or allocation failure.
The quick reproducer is
$ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0
$ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done
The backtrace when vmalloc fails:
[Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages
<...>
[Tue Oct 25 00:13:08 2022] Call Trace:
[Tue Oct 25 00:13:08 2022] <TASK>
[Tue Oct 25 00:13:08 2022] dump_stack_lvl+0x48/0x60
[Tue Oct 25 00:13:08 2022] warn_alloc+0x155/0x180
[Tue Oct 25 00:13:08 2022] __vmalloc_node_range+0x72a/0x760
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_add+0x7c0/0xb20
[Tue Oct 25 00:13:08 2022] ? __kmalloc_large_node+0x4a/0x90
[Tue Oct 25 00:13:08 2022] kvmalloc_node+0xa6/0xd0
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_resize+0x99/0x710
<...>
The fix is to enforce the limit documented in the ipset(8) manpage:
> The internal restriction of the hash:net,iface set type is that the same
> network prefix cannot be stored with more than 64 different interfaces
> in a single set.
Fixes: ccf0a4b7fc68 ("netfilter: ipset: Add bucketsize parameter to all hash types")
Reported-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull NFS client bugfixes from Anna Schumaker:
- Fix some coccicheck warnings
- Avoid memcpy() run-time warning
- Fix up various state reclaim / RECLAIM_COMPLETE errors
- Fix a null pointer dereference in sysfs
- Fix LOCK races
- Fix gss_unwrap_resp_integ() crasher
- Fix zero length clones
- Fix memleak when allocate slot fails
* tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs4: Fix kmemleak when allocate slot failed
NFSv4.2: Fixup CLONE dest file size for zero-length count
SUNRPC: Fix crasher in gss_unwrap_resp_integ()
NFSv4: Retry LOCK on OLD_STATEID during delegation return
SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed
NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot
NFSv4.1: Handle RECLAIM_COMPLETE trunking errors
NFSv4: Fix a potential state reclaim deadlock
NFS: Avoid memcpy() run-time warning for struct sockaddr overflows
nfs: Remove redundant null checks before kfree
|
|
Pull rdma fixes from Jason Gunthorpe:
"Fix a few more of the usual sorts of bugs:
- Another regression with source route validation in CMA, introduced
this merge window
- Crash in hfi1 due to faulty list operations
- PCI ID updates for EFA
- Disable LOCAL_INV in hns because it causes a HW hang
- Crash in hns due to missing initialization
- Memory leak in rxe
- Missing error unwind during ib_core module loading
- Missing error handling in qedr around work queue creation during
startup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/qedr: clean up work queue on failure in qedr_alloc_resources()
RDMA/core: Fix null-ptr-deref in ib_core_cleanup()
RDMA/rxe: Fix mr leak in RESPST_ERR_RNR
RDMA/hns: Fix NULL pointer problem in free_mr_init()
RDMA/hns: Disable local invalidate operation
RDMA/efa: Add EFA 0xefa2 PCI ID
IB/hfi1: Correctly move list in sc_disable()
RDMA/cma: Use output interface for net_dev check
|
|
(cherry picked from commit d99884ad9e3673a12879bc2830f6e5a66cccbd78 in ath-next
as users are seeing this bug more now, also cc stable)
Running this test in a loop it is easy to reproduce an rtnl deadlock:
iw reg set FI
ifconfig wlan0 down
What happens is that thread A (workqueue) tries to update the regulatory:
try to acquire the rtnl_lock of ar->regd_update_work
rtnl_lock+0x17/0x20
ath11k_regd_update+0x15a/0x260 [ath11k]
ath11k_regd_update_work+0x15/0x20 [ath11k]
process_one_work+0x228/0x670
worker_thread+0x4d/0x440
kthread+0x16d/0x1b0
ret_from_fork+0x22/0x30
And thread B (ifconfig) tries to stop the interface:
try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop().
ifconfig 3109 [003] 2414.232506: probe:
ath11k_mac_op_stop: (ffffffffc14187a0)
drv_stop+0x30 ([mac80211])
ieee80211_do_stop+0x5d2 ([mac80211])
ieee80211_stop+0x3e ([mac80211])
__dev_close_many+0x9e ([kernel.kallsyms])
__dev_change_flags+0xbe ([kernel.kallsyms])
dev_change_flags+0x23 ([kernel.kallsyms])
devinet_ioctl+0x5e3 ([kernel.kallsyms])
inet_ioctl+0x197 ([kernel.kallsyms])
sock_do_ioctl+0x4d ([kernel.kallsyms])
sock_ioctl+0x264 ([kernel.kallsyms])
__x64_sys_ioctl+0x92 ([kernel.kallsyms])
do_syscall_64+0x3a ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms])
__GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so)
The sequence of deadlock is:
1. Thread B calls rtnl_lock().
2. Thread A starts to run and calls rtnl_lock() from within
ath11k_regd_update_work(), then enters wait state because the lock is owned by
thread B.
3. Thread B continues to run and tries to call
cancel_work_sync(&ar->regd_update_work), but thread A is in
ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync()
forever waits for ath11k_regd_update_work() to finish and we have a deadlock.
Fix this by switching from using regulatory_set_wiphy_regd_sync() to
regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which
handles the locking on it's own. So the ath11k workqueue can simply exit without
taking any locks, avoiding the deadlock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Cc: <stable@vger.kernel.org>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
[kvalo: improve commit log]
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
|
|
The 2.7.0 series of QCN9074's firmware requests 5 segments
of memory instead of 3 (as in the 2.5.0 series).
The first segment (11M) is too large to be kalloc'd in one
go on x86 and requires piecemeal 1MB allocations, as was
the case with the prior public firmware (2.5.0, 15M).
Since f6f92968e1e5, ath11k will break the memory requests,
but only if there were fewer than 3 segments requested by
the firmware. It seems that 5 segments works fine and
allows QCN9074 to boot on x86 with firmware 2.7.0, so
change things accordingly.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16
Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221022042728.43015-1-stachecki.tyler@gmail.com
|
|
Yang Yingliang says:
====================
two fixes for mISDN
This patchset fixes two issues when device_add() returns error.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The class is set in mISDN_register_device(), but if device_add() returns
error, it will lead to delete a device without added, fix this by using
device_is_registered() to check if the device is registered.
Fixes: a900845e5661 ("mISDN: Add support for Traverse Technologies NETJet PCI cards")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
add put_device() to give up the reference, so that the name can be
freed in kobject_cleanup() when the refcount is 0.
Set device class before put_device() to avoid null release() function
WARN message in device_release().
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The syzkaller reported an issue:
KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387]
CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: rcu_gp srcu_invoke_callbacks
RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101
Call Trace:
<IRQ>
rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255
rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009
rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111
call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790
__run_timers kernel/time/timer.c:1768 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803
__do_softirq+0x1d0/0x9c8 kernel/softirq.c:571
[...]
</IRQ>
It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is
called in the rose_send_frame(). It's the first occurrence of the
`neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and
the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr.
It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf
("rose: Fix Null pointer dereference in rose_send_frame()") ever.
But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8
("rose: check NULL rose_loopback_neigh->loopback") again.
We fix it by add NULL check in rose_transmit_clear_request(). When
the 'dev' in 'neigh' is NULL, we don't reply the request and just
clear it.
syzkaller don't provide repro, and I provide a syz repro like:
r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2)
ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201})
r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0)
bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40)
connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c)
Fixes: 3c53cd65dece ("rose: check NULL rose_loopback_neigh->loopback")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using bpftool to pin {PROG, MAP, LINK} without FILE,
segmentation fault will occur. The reson is that the lack
of FILE will cause strlen to trigger NULL pointer dereference.
The corresponding stacktrace is shown below:
do_pin
do_pin_any
do_pin_fd
mount_bpffs_for_pin
strlen(name) <- NULL pointer dereference
Fix it by adding validation to the common process.
Fixes: 75a1e792c335 ("tools: bpftool: Allow all prog/map handles for pinning objects")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20221102084034.3342995-1-pulehui@huaweicloud.com
|
|
In nf_nat_init(), register_nf_nat_bpf() can fail and return directly
without any error handling.
Then nf_nat_bysource will leak and registering of &nat_net_ops,
&follow_master_nat and nf_nat_hook won't be reverted.
This leaves wild ops in linkedlists and when another module tries to
call register_pernet_operations() or nf_ct_helper_expectfn_register()
it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
...
Fixes: 820dc0523e05 ("net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The TWT Information Frame Disabled bit of control field of TWT Setup
frame shall be set to 1 since handling TWT Information frame is not
supported by current mac80211 implementation.
Fixes: f5a4c24e689f ("mac80211: introduce individual TWT support in AP mode")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://lore.kernel.org/r/20221027015653.1448-1-howard-yh.hsu@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When trying to transmit an data frame with tx_status to a destination
that have no route in the mesh, then it is dropped without recrediting
the ack_status_frames idr.
Once it is exhausted, wpa_supplicant starts failing to do SAE with
NL80211_CMD_FRAME and logs "nl80211: Frame command failed".
Use ieee80211_free_txskb() instead of kfree_skb() to fix it.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://lore.kernel.org/r/20221027140133.1504-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When device is running and the interface status is changed, the gpf issue
is triggered. The problem triggering process is as follows:
Thread A: Thread B
ieee80211_runtime_change_iftype() process_one_work()
... ...
ieee80211_do_stop() ...
... ...
sdata->bss = NULL ...
... ieee80211_subif_start_xmit()
ieee80211_multicast_to_unicast
//!sdata->bss->multicast_to_unicast
cause gpf issue
When the interface status is changed, the sending queue continues to send
packets. After the bss is set to NULL, the bss is accessed. As a result,
this causes a general-protection-fault issue.
The following is the stack information:
general protection fault, probably for non-canonical address
0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f]
Workqueue: mld mld_ifc_work
RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310
Call Trace:
<TASK>
dev_hard_start_xmit+0x1be/0x990
__dev_queue_xmit+0x2c9a/0x3b60
ip6_finish_output2+0xf92/0x1520
ip6_finish_output+0x6af/0x11e0
ip6_output+0x1ed/0x540
mld_sendpack+0xa09/0xe70
mld_ifc_work+0x71c/0xdb0
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: f856373e2f31 ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Reported-by: syzbot+c6e8fca81c294fd5620a@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221026063959.177813-1-shaozhengchao@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
During the initialization of ip_vs_app_net_init(), if file ip_vs_app
fails to be created, the initialization is successful by default.
Therefore, the ip_vs_app file doesn't be found during the remove in
ip_vs_app_net_cleanup(). It will cause WRNING.
The following is the stack information:
name 'ip_vs_app'
WARNING: CPU: 1 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
Call Trace:
<TASK>
ops_exit_list+0x125/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 457c4cbc5a3d ("[NET]: Make /proc/net per network namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
During the initialization of ip_vs_conn_net_init(), if file ip_vs_conn
or ip_vs_conn_sync fails to be created, the initialization is successful
by default. Therefore, the ip_vs_conn or ip_vs_conn_sync file doesn't
be found during the remove.
The following is the stack information:
name 'ip_vs_conn_sync'
WARNING: CPU: 3 PID: 9 at fs/proc/generic.c:712
remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
Call Trace:
<TASK>
__ip_vs_cleanup_batch+0x7d/0x120
ops_exit_list+0x125/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 61b1ab4583e2 ("IPVS: netns, add basic init per netns.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The `char` type with no explicit sign is sometimes signed and sometimes
unsigned. This code will break on platforms such as arm, where char is
unsigned. So mark it here as explicitly signed, so that the
todrop_counter decrement and subsequent comparison is correct.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Jakub reported that the addition of the "network_byte_order"
member in struct nla_policy increases size of 32bit platforms.
Instead of scraping the bit from elsewhere Johannes suggested
to add explicit NLA_BE types instead, so do this here.
NLA_POLICY_MAX_BE() macro is removed again, there is no need
for it: NLA_POLICY_MAX(NLA_BE.., ..) will do the right thing.
NLA_BE64 can be added later.
Fixes: 08724ef69907 ("netlink: introduce NLA_POLICY_MAX_BE")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221031123407.9158-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When lan966x was receiving a frame, then it was building the skb and
after that it was calling dma_unmap_single with frame size as the
length. This actually has 2 issues:
1. It is using a length to map and a different length to unmap.
2. When the unmap was happening, the data was sync for cpu but it could
be that this will overwrite what build_skb was initializing.
The fix for these two problems is to change the order of operations.
First to sync the frame for cpu, then to build the skb and in the end to
unmap using the correct size but without sync the frame again for cpu.
Fixes: c8349639324a ("net: lan966x: Add FDMA functionality")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221031133421.1283196-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Horatiu Vultur says:
====================
net: lan966x: Fixes for when MTU is changed
There were multiple problems in different parts of the driver when
the MTU was changed.
The first problem was that the HW was missing to configure the correct
value, it was missing ETH_HLEN and ETH_FCS_LEN. The second problem was
when vlan filtering was enabled/disabled, the MRU was not adjusted
corretly. While the last issue was that the FDMA was calculated wrongly
the correct maximum MTU.
====================
Link: https://lore.kernel.org/r/20221030213636.1031408-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When MTU is changed, FDMA is required to calculate what is the maximum
size of the frame that it can received. So it can calculate what is the
page order needed to allocate for the received frames.
The first problem was that, when the max MTU was calculated it was
reading the value from dev and not from HW, so in this way it was
missing L2 header + the FCS.
The other problem was that once the skb is created using
__build_skb_around, it would reserve some space for skb_shared_info.
So if we received a frame which size is at the limit of the page order
then the creating will failed because it would not have space to put all
the data.
Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When vlan filtering is enabled/disabled, it is required to adjust the
maximum received frame size that it can received. When vlan filtering is
enabled, it would all to receive extra 4 bytes, that are the vlan tag.
So the maximum frame size would be 1522 with a vlan tag. If vlan
filtering is disabled then the maximum frame size would be 1518
regardless if there is or not a vlan tag.
Fixes: 6d2c186afa5d ("net: lan966x: Add vlan support.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the MTU was changed, the lan966x didn't take in consideration
the L2 header and the FCS. So the HW was configured with a smaller
value than what was desired. Therefore the correct value to configure
the HW would be new_mtu + ETH_HLEN + ETH_FCS_LEN.
The vlan tag is not considered here, because at the time when the
blamed commit was added, there was no vlan filtering support. The
vlan fix will be part of the next patch.
Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull documentation fixes from Jonathan Corbet:
"Four small fixes for the docs tree"
* tag 'docs-6.1-fixes' of git://git.lwn.net/linux:
docs/process/howto: Replace C89 with C11
Documentation: Fix spelling mistake in hacking.rst
Documentation: process: replace outdated LTS table w/ link
tracing/histogram: Update document for KEYS_MAX size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a loop that occurs when using multiple net namespaces
* tag 'nfsd-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix net-namespace logic in __nfsd_file_cache_purge
|
|
If the namespace doesn't match the one in "net", then we'll continue,
but that doesn't cause another rhashtable_walk_next call, so it will
loop infinitely.
Fixes: ce502f81ba88 ("NFSD: Convert the filecache to use rhashtable")
Reported-by: Petr Vorel <pvorel@suse.cz>
Link: https://lore.kernel.org/ltp/Y1%2FP8gDAcWC%2F+VR3@pevik/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When running `test_sockmap` selftests, the following warning appears:
WARNING: CPU: 2 PID: 197 at net/core/stream.c:205 sk_stream_kill_queues+0xd3/0xf0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
tcp_rcv_state_process+0xd28/0x1380
? tcp_v4_do_rcv+0x77/0x2c0
tcp_v4_do_rcv+0x77/0x2c0
__release_sock+0x106/0x130
__tcp_close+0x1a7/0x4e0
tcp_close+0x20/0x70
inet_release+0x3c/0x80
__sock_release+0x3a/0xb0
sock_close+0x14/0x20
__fput+0xa3/0x260
task_work_run+0x59/0xb0
exit_to_user_mode_prepare+0x1b3/0x1c0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x48/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root case is in commit 84472b436e76 ("bpf, sockmap: Fix more uncharged
while msg has more_data"), where I used msg->sg.size to replace the tosend,
causing breakage:
if (msg->apply_bytes && msg->apply_bytes < tosend)
tosend = psock->apply_bytes;
Fixes: 84472b436e76 ("bpf, sockmap: Fix more uncharged while msg has more_data")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1667266296-8794-1-git-send-email-wangyufen@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
"This contains a couple of fixes for string-function bugs"
* tag 'nolibc-urgent.2022.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc/string: Fix memcmp() implementation
tools/nolibc: Fix missing strlen() definition and infinite loop with gcc-12
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- fix lock initialization race in gfn-to-pfn cache (+selftests)
- fix two refcounting errors
- emulator fixes
- mask off reserved bits in CPUID
- fix bug with disabling SGX
RISC-V:
- update MAINTAINERS"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
KVM: x86: emulator: update the emulation mode after CR0 write
KVM: x86: emulator: update the emulation mode after rsm
KVM: x86: emulator: introduce emulator_recalc_and_set_mode
KVM: x86: emulator: em_sysexit should update ctxt->mode
KVM: selftests: Mark "guest_saw_irq" as volatile in xen_shinfo_test
KVM: selftests: Add tests in xen_shinfo_test to detect lock races
KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache
KVM: Initialize gfn_to_pfn_cache locks in dedicated helper
KVM: VMX: fully disable SGX if SECONDARY_EXEC_ENCLS_EXITING unavailable
KVM: x86: Exempt pending triple fault from event injection sanity check
MAINTAINERS: git://github -> https://github.com for kvm-riscv
KVM: debugfs: Return retval of simple_attr_open() if it fails
KVM: x86: Reduce refcount if single_open() fails in kvm_mmu_rmaps_stat_open()
KVM: x86: Mask off reserved bits in CPUID.8000001FH
KVM: x86: Mask off reserved bits in CPUID.8000001AH
KVM: x86: Mask off reserved bits in CPUID.80000008H
KVM: x86: Mask off reserved bits in CPUID.80000006H
KVM: x86: Mask off reserved bits in CPUID.80000001H
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- fix use after free in exar driver
- spelling fix in comment
* tag 'linux-watchdog-6.1-rc4' of git://www.linux-watchdog.org/linux-watchdog:
drivers: watchdog: exar_wdt.c fix use after free
watchdog: sp805_wdt: fix spelling typo in comment
|
|
If an error occurs after the first kzalloc() the corresponding memory
allocation is never freed.
Add the missing kfree() in the error handling path, as already done in the
remove() function.
Fixes: 7e773594dada ("sfc: Separate efx_nic memory from net_device memory")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/dc114193121c52c8fa3779e49bdd99d4b41344a9.1667077009.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an error (NULL) is returned by krealloc(), callers of realloc_array()
were setting their allocation pointers to NULL, but on error krealloc()
does not touch the original allocation. This would result in a memory
resource leak. Instead, free the old allocation on the error handling
path.
The memory leak information is as follows as also reported by Zhengchao:
unreferenced object 0xffff888019801800 (size 256):
comm "bpf_repo", pid 6490, jiffies 4294959200 (age 17.170s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000b211474b>] __kmalloc_node_track_caller+0x45/0xc0
[<0000000086712a0b>] krealloc+0x83/0xd0
[<00000000139aab02>] realloc_array+0x82/0xe2
[<00000000b1ca41d1>] grow_stack_state+0xfb/0x186
[<00000000cd6f36d2>] check_mem_access.cold+0x141/0x1341
[<0000000081780455>] do_check_common+0x5358/0xb350
[<0000000015f6b091>] bpf_check.cold+0xc3/0x29d
[<000000002973c690>] bpf_prog_load+0x13db/0x2240
[<00000000028d1644>] __sys_bpf+0x1605/0x4ce0
[<00000000053f29bd>] __x64_sys_bpf+0x75/0xb0
[<0000000056fedaf5>] do_syscall_64+0x35/0x80
[<000000002bd58261>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: c69431aab67a ("bpf: verifier: Improve function state reallocation")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Bill Wendling <morbo@google.com>
Cc: Lorenz Bauer <oss@lmb.io>
Link: https://lore.kernel.org/bpf/20221029025433.2533810-1-keescook@chromium.org
|
|
No need to postpone this to the commit release path, since no packets
are walking over this object, this is accessed from control plane only.
This helped uncovered UAF triggered by races with the netlink notifier.
Fixes: 9dd732e0bdf5 ("netfilter: nf_tables: memleak flow rule from commit path")
Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
commit release path is invoked via call_rcu and it runs lockless to
release the objects after rcu grace period. The netlink notifier handler
might win race to remove objects that the transaction context is still
referencing from the commit release path.
Call rcu_barrier() to ensure pending rcu callbacks run to completion
if the list of transactions to be destroyed is not empty.
Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership")
Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch fixes an intra-object buffer overflow in brcmfmac that occurs
when the device provides a 'bsscfgidx' equal to or greater than the
buffer size. The patch adds a check that leads to a safe failure if that
is the case.
This fixes CVE-2022-3628.
UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
index 52 is out of range for type 'brcmf_if *[16]'
CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: events brcmf_fweh_event_worker
Call Trace:
dump_stack_lvl+0x57/0x7d
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds+0x69/0x80
? memcpy+0x39/0x60
brcmf_fweh_event_worker+0xae1/0xc00
? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x873/0x13e0
? lock_release+0x640/0x640
? pwq_dec_nr_in_flight+0x320/0x320
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x8b/0xd10
? __kthread_parkme+0xd9/0x1d0
? process_one_work+0x13e0/0x13e0
kthread+0x379/0x450
? _raw_spin_unlock_irq+0x24/0x30
? set_kthread_struct+0x100/0x100
ret_from_fork+0x1f/0x30
================================================================================
general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN
KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff]
CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: events brcmf_fweh_event_worker
RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100
Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00
RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000
RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50
RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809
R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045
R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000
FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
brcmf_fweh_event_worker+0x117/0xc00
? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x873/0x13e0
? lock_release+0x640/0x640
? pwq_dec_nr_in_flight+0x320/0x320
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x8b/0xd10
? __kthread_parkme+0xd9/0x1d0
? process_one_work+0x13e0/0x13e0
kthread+0x379/0x450
? _raw_spin_unlock_irq+0x24/0x30
? set_kthread_struct+0x100/0x100
ret_from_fork+0x1f/0x30
Modules linked in: 88XXau(O) 88x2bu(O)
---[ end trace 41d302138f3ff55a ]---
RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100
Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00
RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000
RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50
RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809
R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045
R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000
FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Arend van Spriel <aspriel@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dokyung Song <dokyung.song@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna
|
|
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, we get a warning when assigning the
unchecked output of hex_to_bin() to that unsigned char. Mark `key` as a
`u8`, which matches the struct's type, and then check each call to
hex_to_bin() before casting.
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024162843.535921-1-Jason@zx2c4.com
|
|
On 32-bit kernels, 64-bit syscall arguments are split into two
registers. For that to work with syscall wrappers, the prototype of the
syscall must have the argument split so that the wrapper macro properly
unpacks the arguments from pt_regs.
The fanotify_mark() syscall is one such syscall, which already has a
split prototype, guarded behind ARCH_SPLIT_ARG64.
So select ARCH_SPLIT_ARG64 to get that prototype and fix fanotify_mark()
on 32-bit kernels with syscall wrappers.
Note also that fanotify_mark() is the only usage of ARCH_SPLIT_ARG64.
Fixes: 7e92e01b7245 ("powerpc: Provide syscall wrapper")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221101034852.2340319-1-mpe@ellerman.id.au
|
|
Recently, we got two syzkaller problems because of oversize packet
when napi frags enabled.
One of the problems is because the first seg size of the iov_iter
from user space is very big, it is 2147479538 which is bigger than
the threshold value for bail out early in __alloc_pages(). And
skb->pfmemalloc is true, __kmalloc_reserve() would use pfmemalloc
reserves without __GFP_NOWARN flag. Thus we got a warning as following:
========================================================
WARNING: CPU: 1 PID: 17965 at mm/page_alloc.c:5295 __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295
...
Call trace:
__alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295
__alloc_pages_node include/linux/gfp.h:550 [inline]
alloc_pages_node include/linux/gfp.h:564 [inline]
kmalloc_large_node+0x94/0x350 mm/slub.c:4038
__kmalloc_node_track_caller+0x620/0x8e4 mm/slub.c:4545
__kmalloc_reserve.constprop.0+0x1e4/0x2b0 net/core/skbuff.c:151
pskb_expand_head+0x130/0x8b0 net/core/skbuff.c:1654
__skb_grow include/linux/skbuff.h:2779 [inline]
tun_napi_alloc_frags+0x144/0x610 drivers/net/tun.c:1477
tun_get_user+0x31c/0x2010 drivers/net/tun.c:1835
tun_chr_write_iter+0x98/0x100 drivers/net/tun.c:2036
The other problem is because odd IPv6 packets without NEXTHDR_NONE
extension header and have big packet length, it is 2127925 which is
bigger than ETH_MAX_MTU(65535). After ipv6_gso_pull_exthdrs() in
ipv6_gro_receive(), network_header offset and transport_header offset
are all bigger than U16_MAX. That would trigger skb->network_header
and skb->transport_header overflow error, because they are all '__u16'
type. Eventually, it would affect the value for __skb_push(skb, value),
and make it be a big value. After __skb_push() in ipv6_gro_receive(),
skb->data would less than skb->head, an out of bounds memory bug occurred.
That would trigger the problem as following:
==================================================================
BUG: KASAN: use-after-free in eth_type_trans+0x100/0x260
...
Call trace:
dump_backtrace+0xd8/0x130
show_stack+0x1c/0x50
dump_stack_lvl+0x64/0x7c
print_address_description.constprop.0+0xbc/0x2e8
print_report+0x100/0x1e4
kasan_report+0x80/0x120
__asan_load8+0x78/0xa0
eth_type_trans+0x100/0x260
napi_gro_frags+0x164/0x550
tun_get_user+0xda4/0x1270
tun_chr_write_iter+0x74/0x130
do_iter_readv_writev+0x130/0x1ec
do_iter_write+0xbc/0x1e0
vfs_writev+0x13c/0x26c
To fix the problems, restrict the packet size less than
(ETH_MAX_MTU - NET_SKB_PAD - NET_IP_ALIGN) which has considered reserved
skb space in napi_alloc_skb() because transport_header is an offset from
skb->head. Add len check in tun_napi_alloc_frags() simply.
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221029094101.1653855-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
