summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-26bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled.Michael Chan
We are returning the wrong count for ETH_SS_STATS in get_sset_count() when XDP or TCs are enabled. In a recent commit, we got rid of irrelevant counters when the ring is RX only or TX only, but we did not make the proper adjustments for the count. As a result, when we have XDP or TCs enabled, we are returning an excess count because some of the rings are TX only. This causes ethtool -S to display extra counters with no counter names. Fix bnxt_get_num_ring_stats() by not assuming that all rings will always have RX and TX counters in combined mode. Fixes: 125592fbf467 ("bnxt_en: show only relevant ethtool stats for a TX or RX ring") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Check for zero dir entries in NVRAM.Vasundhara Volam
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Don't query FW when netif_running() is false.Pavan Chebbi
In rare conditions like two stage OS installation, the ethtool's get_channels function may be called when the device is in D3 state, leading to uncorrectable PCI error. Check netif_running() first before making any query to FW which involves writing to BAR. Fixes: db4723b3cd2d ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: dp83869: Fix RGMII internal delay configurationDaniel Gorsulowski
The RGMII control register at 0x32 indicates the states for the bits RGMII_TX_CLK_DELAY and RGMII_RX_CLK_DELAY as follows: RGMII Transmit/Receive Clock Delay 0x0 = RGMII transmit clock is shifted with respect to transmit/receive data. 0x1 = RGMII transmit clock is aligned with respect to transmit/receive data. This commit fixes the inversed behavior of these bits Fixes: 736b25afe284 ("net: dp83869: Add RGMII internal delay configuration") Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25ibmvnic fix NULL tx_pools and rx_tools issue at do_resetMingming Cao
At the time of do_rest, ibmvnic tries to re-initalize the tx_pools and rx_pools to avoid re-allocating the long term buffer. However there is a window inside do_reset that the tx_pools and rx_pools were freed before re-initialized making it possible to deference null pointers. This patch fix this issue by always check the tx_pool and rx_pool are not NULL after ibmvnic_login. If so, re-allocating the pools. This will avoid getting into calling reset_tx/rx_pools with NULL adapter tx_pools/rx_pools pointer. Also add null pointer check in reset_tx_pools and reset_rx_pools to safe handle NULL pointer case. Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw_new: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: caif: fix error code handlingTong Zhang
cfpkt_peek_head return 0 and 1, caller is checking error using <0 Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: dsa: mt7530: Add of_node_put() before break and return statementsSumera Priyadarsini
Every iteration of for_each_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in mt7530.c by inserting of_node_put() before the break and return statements. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25gtp: add GTPA_LINK info to msg sent to userspaceNicolas Dichtel
During a dump, this attribute is essential, it enables the userspace to know on which interface the context is linked to. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24bpf, sysctl: Let bpf_stats_handler take a kernel pointer bufferTobias Klauser
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of bpf_stats_handler to match ctl_table.proc_handler which fixes the following sparse warning: kernel/sysctl.c:226:49: warning: incorrect type in argument 3 (different address spaces) kernel/sysctl.c:226:49: expected void * kernel/sysctl.c:226:49: got void [noderef] __user *buffer kernel/sysctl.c:2640:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces)) kernel/sysctl.c:2640:35: expected int ( [usertype] *proc_handler )( ... ) kernel/sysctl.c:2640:35: got int ( * )( ... ) Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/bpf/20200824142047.22043-1-tklauser@distanz.ch
2020-08-24selftests/bpf: Fix test_progs-flavor run getting number of testsJesper Dangaard Brouer
Commit 643e7233aa94 ("selftests/bpf: Test_progs option for getting number of tests") introduced ability to getting number of tests, which is targeted towards scripting. As demonstrate in the commit the number can be use as a shell variable for further scripting. The test_progs program support "flavor", which is detected by the binary have a "-flavor" in the executable name. One example is test_progs-no_alu32, which load bpf-progs compiled with disabled alu32, located in dir 'no_alu32/'. The problem is that invoking a "flavor" binary prints to stdout e.g.: "Switching to flavor 'no_alu32' subdirectory..." Thus, intermixing with the number of tests, making it unusable for scripting. Fix the issue by only printing "flavor" info when verbose -v option is used. Fixes: 643e7233aa94 ("selftests/bpf: Test_progs option for getting number of tests") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159827024012.923543.7104106594870150597.stgit@firesoul
2020-08-24bpf: Fix a buffer out-of-bound access when filling raw_tp link_infoYonghong Song
Commit f2e10bff16a0 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link") added link query for raw_tp. One of fields in link_info is to fill a user buffer with tp_name. The Scurrent checking only declares "ulen && !ubuf" as invalid. So "!ulen && ubuf" will be valid. Later on, we do "copy_to_user(ubuf, tp_name, ulen - 1)" which may overwrite user memory incorrectly. This patch fixed the problem by disallowing "!ulen && ubuf" case as well. Fixes: f2e10bff16a0 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200821191054.714731-1-yhs@fb.com
2020-08-24Merge tag 'batadv-net-for-davem-20200824' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Avoid uninitialized memory access when handling DHCP, by Sven Eckelmann - Fix check for own OGM in OGM receive handler, by Linus Luessing - Fix netif_rx access for non-interrupt context in BLA, by Jussi Kivilinna ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24sfc: fix boolreturn.cocci warning and rename functionEdward Cree
check_fcs() was returning bool as 0/1, which was a sign that the sense of the function was unclear: false was good, which doesn't really match a name like 'check_$thing'. So rename it to ef100_has_fcs_error(), and use proper booleans in the return statements. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: ocelot: Add of_node_put() before return statementSumera Priyadarsini
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in felix.c by inserting of_node_put() before the return statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24dt-bindings: net: dsa: Fix typoKurt Kanzenbach
Fix spelling mistake documenation -> documentation. Fixes: 5a18bb14c0f7 ("dt-bindings: net: dsa: Let dsa.txt refer to dsa.yaml") Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24firestream: Fix memleak in fs_openDinghao Liu
When make_rate() fails, vcc should be freed just like other error paths in fs_open(). Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: arc_emac: Fix memleak in arc_mdio_probeDinghao Liu
When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24NFC: st95hf: Fix memleak in st95hf_in_send_cmdDinghao Liu
When down_killable() fails, skb_resp should be freed just like when st95hf_spi_send() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge branch 'MAINTAINERS-Remove-self-from-PHY-LIBRARY'David S. Miller
Florian Fainelli says: ==================== MAINTAINERS: Remove self from PHY LIBRARY This patch series aims at allowing myself to keep track of the Ethernet PHY and MDIO bus drivers that I authored or contributed to without being listed as a maintainer in the PHY library anymore. Thank you for the fish, I will still be around. This builds on top of Andrew's series: https://lore.kernel.org/netdev/20200822180611.2576807-1-andrew@lunn.ch/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: Remove self from PHY LIBRARYFlorian Fainelli
My last significant achievements to the PHY library was ensuring we would have small bus factor by having Andrew and Heiner added. The world has moved on past 1G, but I have not, so let more competent maintainers take over. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: Add entry for Broadcom Ethernet PHY driversFlorian Fainelli
Add an entry for the Broadcom Ethernet PHY drivers covering the BCM63xx, BCM7xxx, BCM87xx, BCM54140, BCM84881, the venerable broadcom.c driver and the companion library files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: GENET: Add UniMAC MDIO controller filesFlorian Fainelli
In preparation for removing myself from the PHYLIB entry, add the UniMAC MDIO controller files (DT binding, driver and platform_data header) to the GENET entry. The UniMAC MDIO controller is essential to the GENET operation, therefore it makes sense to group them together. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: GENET: Add DT binding fileFlorian Fainelli
When the DT binding was added in aab5127d94e6 ("Documentation: add Device tree bindings for Broadcom GENET"), the file was not explicitly listed under the GENET MAINTAINERS section, do that now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: B53: Add DT binding fileFlorian Fainelli
When the binding was added with 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch"), it was not explicitly added to the B53 MAINTAINERS file section, add it now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: GENET: Add missing platform data fileFlorian Fainelli
When commit b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree") added include/linux/platform_data/bcmgenet.h, the file was not added to the GENET MAINTAINERS file section, add it now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: dsa: sja1105: Do not use address of compatible member in ↵Nathan Chancellor
sja1105_check_device_id Clang warns: drivers/net/dsa/sja1105/sja1105_main.c:3418:38: warning: address of array 'match->compatible' will always evaluate to 'true' [-Wpointer-bool-conversion] for (match = sja1105_dt_ids; match->compatible; match++) { ~~~ ~~~~~~~^~~~~~~~~~ 1 warning generated. We should check the value of the first character in compatible to see if it is empty or not. This matches how the rest of the tree iterates over IDs. Fixes: 0b0e299720bb ("net: dsa: sja1105: use detected device id instead of DT one on mismatch") Link: https://github.com/ClangBuiltLinux/linux/issues/1139 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: Get rid of consume_skb when tracing is offHerbert Xu
The function consume_skb is only meaningful when tracing is enabled. This patch makes it conditional on CONFIG_TRACEPOINTS. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24drivers/net/wan/lapbether: Added needed_tailroomXie He
The underlying Ethernet device may request necessary tailroom to be allocated by setting needed_tailroom. This driver should also set needed_tailroom to request the tailroom needed by the underlying Ethernet device to be allocated. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24netlabel: fix problems with mapping removalPaul Moore
This patch fixes two main problems seen when removing NetLabel mappings: memory leaks and potentially extra audit noise. The memory leaks are caused by not properly free'ing the mapping's address selector struct when free'ing the entire entry as well as not properly cleaning up a temporary mapping entry when adding new address selectors to an existing entry. This patch fixes both these problems such that kmemleak reports no NetLabel associated leaks after running the SELinux test suite. The potentially extra audit noise was caused by the auditing code in netlbl_domhsh_remove_entry() being called regardless of the entry's validity. If another thread had already marked the entry as invalid, but not removed/free'd it from the list of mappings, then it was possible that an additional mapping removal audit record would be generated. This patch fixes this by returning early from the removal function when the entry was previously marked invalid. This change also had the side benefit of improving the code by decreasing the indentation level of large chunk of code by one (accounting for most of the diffstat). Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24sctp: not disable bh in the whole sctp_get_port_local()Xin Long
With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck: [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp] There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead. The same thing was actually done for inet_csk_get_port() in Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral ports in bind()"). Thanks to Marcelo for pointing the buggy code out. v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24ravb: Fixed to be able to unload modulesYuusuke Ashizuka
When this driver is built as a module, I cannot rmmod it after insmoding it. This is because that this driver calls ravb_mdio_init() at the time of probe, and module->refcnt is incremented by alloc_mdio_bitbang() called after that. Therefore, even if ifup is not performed, the driver is in use and rmmod cannot be performed. $ lsmod Module Size Used by ravb 40960 1 $ rmmod ravb rmmod: ERROR: Module ravb is in use Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby rmmod is possible in the ifdown state. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24ipv6: ndisc: adjust ndisc_ifinfo_sysctl_change prototypeTobias Klauser
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ndisc_ifinfo_sysctl_change to take a kernel pointer. Adjust its prototype in net/ndisc.h as well to fix the following sparse warning: net/ipv6/ndisc.c:1838:5: error: symbol 'ndisc_ifinfo_sysctl_change' redeclared with different type (incompatible argument 3 (different address spaces)): net/ipv6/ndisc.c:1838:5: int extern [addressable] [signed] [toplevel] ndisc_ifinfo_sysctl_change( ... ) net/ipv6/ndisc.c: note: in included file (through include/net/ipv6.h): ./include/net/ndisc.h:496:5: note: previously declared as: ./include/net/ndisc.h:496:5: int extern [addressable] [signed] [toplevel] ndisc_ifinfo_sysctl_change( ... ) net/ipv6/ndisc.c: note: in included file (through include/net/ip6_route.h): Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Don't flag SCTP heartbeat as invalid for re-used connections, from Florian Westphal. 2) Bogus overlap report due to rbtree tree rotations, from Stefano Brivio. 3) Detect partial overlap with start end point match, also from Stefano. 4) Skip netlink dump of NFTA_SET_USERDATA is unset. 5) Incorrect nft_list_attributes enumeration definition. 6) Missing zeroing before memcpy to destination register, also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: systemport: Fix memleak in bcm_sysport_probeDinghao Liu
When devm_kcalloc() fails, dev should be freed just like what we've done in the subsequent error paths. Fixes: 7b78be48a8eb6 ("net: systemport: Dynamically allocate number of TX rings") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: hns: Fix memleak in hns_nic_dev_probeDinghao Liu
hns_nic_dev_probe allocates ndev, but not free it on two error handling paths, which may lead to memleak. Fixes: 63434888aaf1b ("net: hns: net: hns: enet adds support of acpi") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23Merge tag 'powerpc-5.9-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Add perf support for emitting extended registers for power10. - A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait long enough for the CPU to be offlined, leading to crashes. - Addition of a raw cputable entry for Power10, which is not required to boot, but is required to make our PMU setup work correctly in guests. - Three fixes for the recent changes on 32-bit Book3S to move modules into their own segment for strict RWX. - A fix for a recent change in our powernv PCI code that could lead to crashes. - A change to our perf interrupt accounting to avoid soft lockups when using some events, found by syzkaller. - A change in the way we handle power loss events from the hypervisor on pseries. We no longer immediately shut down if we're told we're running on a UPS. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde. * tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000 powerpc/pseries: Do not initiate shutdown when system is running on UPS powerpc/perf: Fix soft lockups due to missed interrupt accounting powerpc/powernv/pci: Fix possible crash when releasing DMA resources powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32 powerpc/fixmap: Fix the size of the early debug area powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled powerpc/kernel: Cleanup machine check function declarations powerpc: Add POWER10 raw mode cputable entry powerpc/perf: Add extended regs support for power10 platform powerpc/perf: Add support for outputting extended regs in perf intr_regs powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
2020-08-23Merge tag 'x86-urgent-2020-08-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for x86 which removes the RDPID usage from the paranoid entry path and unconditionally uses LSL to retrieve the CPU number. RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values and restores them either when leaving the run loop, on preemption or when going out to user space. MSR_TSX_AUX is part of that lazy MSR set, so after writing the guest value and before the lazy restore any exception using the paranoid entry will read the guest value and use it as CPU number to retrieve the GSBASE value for the current CPU when FSGSBASE is enabled. As RDPID is only used in that particular entry path, there is no reason to burden VMENTER/EXIT with two extra MSR writes. Remove the RDPID optimization, which is not even backed by numbers from the paranoid entry path instead" * tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
2020-08-23Merge tag 'perf-urgent-2020-08-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fix from Thomas Gleixner: "A single update for perf on x86 which has support for the broken down bandwith counters" * tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
2020-08-23Merge tag 'efi-urgent-2020-08-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: - Enforce NX on RO data in mixed EFI mode - Destroy workqueue in an error handling path to prevent UAF - Stop argument parser at '--' which is the delimiter for init - Treat a NULL command line pointer as empty instead of dereferncing it unconditionally. - Handle an unterminated command line correctly - Cleanup the 32bit code leftovers and remove obsolete documentation * tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: efi: remove description of efi=old_map efi/x86: Move 32-bit code into efi_32.c efi/libstub: Handle unterminated cmdline efi/libstub: Handle NULL cmdline efi/libstub: Stop parsing arguments at "--" efi: add missed destroy_workqueue when efisubsys_init fails efi/x86: Mark kernel rodata non-executable for mixed mode
2020-08-23Merge tag 'core-urgent-2020-08-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull entry fix from Thomas Gleixner: "A single bug fix for the common entry code. The transcription of the x86 version messed up the reload of the syscall number from pt_regs after ptrace and seccomp which breaks syscall number rewriting" * tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: core/entry: Respect syscall number rewrites
2020-08-23Merge tag 'edac_urgent_for_v5.9_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "A single fix correcting a reversed error severity determination check which lead to a recoverable error getting marked as fatal, by Tony Luck" * tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
2020-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Nothing earth shattering here, lots of small fixes (f.e. missing RCU protection, bad ref counting, missing memset(), etc.) all over the place: 1) Use get_file_rcu() in task_file iterator, from Yonghong Song. 2) There are two ways to set remote source MAC addresses in macvlan driver, but only one of which validates things properly. Fix this. From Alvin Šipraga. 3) Missing of_node_put() in gianfar probing, from Sumera Priyadarsini. 4) Preserve device wanted feature bits across multiple netlink ethtool requests, from Maxim Mikityanskiy. 5) Fix rcu_sched stall in task and task_file bpf iterators, from Yonghong Song. 6) Avoid reset after device destroy in ena driver, from Shay Agroskin. 7) Missing memset() in netlink policy export reallocation path, from Johannes Berg. 8) Fix info leak in __smc_diag_dump(), from Peilin Ye. 9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark Tomlinson. 10) Fix number of data stream negotiation in SCTP, from David Laight. 11) Fix double free in connection tracker action module, from Alaa Hleihel. 12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: nexthop: don't allow empty NHA_GROUP bpf: Fix two typos in uapi/linux/bpf.h net: dsa: b53: check for timeout tipc: call rcu_read_lock() in tipc_aead_encrypt_done() net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow net: sctp: Fix negotiation of the number of data streams. dt-bindings: net: renesas, ether: Improve schema validation gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit() hv_netvsc: Remove "unlikely" from netvsc_select_queue bpf: selftests: global_funcs: Check err_str before strstr bpf: xdp: Fix XDP mode when no mode flags specified selftests/bpf: Remove test_align leftovers tools/resolve_btfids: Fix sections with wrong alignment net/smc: Prevent kernel-infoleak in __smc_diag_dump() sfc: fix build warnings on 32-bit net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified" libbpf: Fix map index used in error message net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe() net: atlantic: Use readx_poll_timeout() for large timeout ...
2020-08-22Merge branch 'work.epoll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull epoll fixes from Al Viro: "Fix reference counting and clean up exit paths" * 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_epoll_ctl(): clean the failure exits up a bit epoll: Keep a reference on files added to the check list
2020-08-22do_epoll_ctl(): clean the failure exits up a bitAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-22epoll: Keep a reference on files added to the check listMarc Zyngier
When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-22net: nexthop: don't allow empty NHA_GROUPNikolay Aleksandrov
Currently the nexthop code will use an empty NHA_GROUP attribute, but it requires at least 1 entry in order to function properly. Otherwise we end up derefencing null or random pointers all over the place due to not having any nh_grp_entry members allocated, nexthop code relies on having at least the first member present. Empty NHA_GROUP doesn't make any sense so just disallow it. Also add a WARN_ON for any future users of nexthop_create_group(). BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ #93 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:fib_check_nexthop+0x4a/0xaa Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85 RSP: 0018:ffff88807983ba00 EFLAGS: 00010213 RAX: 0000000000000000 RBX: ffff88807983bc00 RCX: 0000000000000000 RDX: ffff88807983bc00 RSI: 0000000000000000 RDI: ffff88807bdd0a80 RBP: ffff88807983baf8 R08: 0000000000000dc0 R09: 000000000000040a R10: 0000000000000000 R11: ffff88807bdd0ae8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88807bea3100 R15: 0000000000000001 FS: 00007f10db393700(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000007bd0f004 CR4: 00000000003706f0 Call Trace: fib_create_info+0x64d/0xaf7 fib_table_insert+0xf6/0x581 ? __vma_adjust+0x3b6/0x4d4 inet_rtm_newroute+0x56/0x70 rtnetlink_rcv_msg+0x1e3/0x20d ? rtnl_calcit.isra.0+0xb8/0xb8 netlink_rcv_skb+0x5b/0xac netlink_unicast+0xfa/0x17b netlink_sendmsg+0x334/0x353 sock_sendmsg_nosec+0xf/0x3f ____sys_sendmsg+0x1a0/0x1fc ? copy_msghdr_from_user+0x4c/0x61 ___sys_sendmsg+0x63/0x84 ? handle_mm_fault+0xa39/0x11b5 ? sockfd_lookup_light+0x72/0x9a __sys_sendmsg+0x50/0x6e do_syscall_64+0x54/0xbe entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f10dacc0bb7 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48 RSP: 002b:00007ffcbe628bf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffcbe628f80 RCX: 00007f10dacc0bb7 RDX: 0000000000000000 RSI: 00007ffcbe628c60 RDI: 0000000000000003 RBP: 000000005f41099c R08: 0000000000000001 R09: 0000000000000008 R10: 00000000000005e9 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007ffcbe628d70 R15: 0000563a86c6e440 Modules linked in: CR2: 0000000000000080 CC: David Ahern <dsahern@gmail.com> Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-22Merge tag 'kbuild-fixes-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - move -Wsign-compare warning from W=2 to W=3 - fix the keyword _restrict to __restrict in genksyms - fix more bugs in qconf * tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: qconf: replace deprecated QString::sprintf() with QTextStream kconfig: qconf: remove redundant help in the info view kconfig: qconf: remove qInfo() to get back Qt4 support kconfig: qconf: remove unused colNr kconfig: qconf: fix the popup menu in the ConfigInfoView window kconfig: qconf: fix signal connection to invalid slots genksyms: keywords: Use __restrict not _restrict kbuild: remove redundant patterns in filter/filter-out extract-cert: add static to local data Makefile.extrawarn: Move sign-compare from W=2 to W=3
2020-08-22Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Allow booting of late secondary CPUs affected by erratum 1418040 (currently they are parked if none of the early CPUs are affected by this erratum). - Add the 32-bit vdso Makefile to the vdso_install rule so that 'make vdso_install' installs the 32-bit compat vdso when it is compiled. - Print a warning that untrusted guests without a CPU erratum workaround (Cortex-A57 832075) may deadlock the affected system. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64: vdso32: Install vdso32 from vdso_install KVM: arm64: Print warning when cpu erratum can cause guests to deadlock arm64: Allow booting of late CPUs affected by erratum 1418040 arm64: Move handling of erratum 1418040 into C code
generated by cgit (git 2.34.1) at 2025-07-16 07:03:56 +0000