summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-05mt76: usb: move mt76x02u_tx_complete_skb in mt76x02_usb_core.cLorenzo Bianconi
Move mt76x02u_tx_complete_skb and mt76x02u_remove_dma_hdr since they are used just by usb code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_tx_prepare_skb in mt76x02_txrx.cLorenzo Bianconi
Move mt76x02_tx_prepare_skb routine in mt76x02-lib module in order to be reused by mt76x0 driver in tx datapath Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move tpc routines in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_tx_get_txpwr_adj and mt76x02_tx_set_txpwr_auto routines in mt76x02-lib module since they are shared between mt76x0 and mt76x2 drivers. Moreover remove get_txpwr_adj function pointer Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x2: remove leftover function declatarionsLorenzo Bianconi
Remove following function declarations since they have been moved to mt76x02-lib module: - mt76x2_sta_add - mt76x2_sta_remove - mt76x2_remove_interface - mt76x2_conf_tx - mt76x2_txq_init Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: rename mt76x02_util.h in mt76x02.hLorenzo Bianconi
Rename mt76x02_util.h header file in mt76x02.h since now contains all mt76x02 related definitions and not just utility routines declarations Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move txrx shared routines in mt76x02_txrx.cLorenzo Bianconi
Add mt76x02_txrx.c source file in order to contain tx/rx shared routines for mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_tx in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_tx shared routine in mt76x02-lib module and remove duplicated code. Moreover remove mt76x0/tx.c since it is an empty file Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: unify rxwi parsing between mt76x2 and mt76x0 driversLorenzo Bianconi
Unify rxwi parsing between mt76x2 and mt76x0. Remove the following routines: - mt76x0_phy_get_rssi - mt76x0_queue_rx_skb - mt76x0_mac_process_rx Moreover remove mt76x2/common.c and mt76x0/mac.h since are empty files Enable CCMP PN sw validation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_mac_process_rx in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_mac_process_rx utility routine in mt76x02-lib in order to by reused by mt76x0 driver for rxwi parsing. Add stream number check in mt76x02_mac_process_rx since mt76x0 chipsets are 1x1:1 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: merge mt76x0_dev in mt76x02_devLorenzo Bianconi
Merge mt76x0_dev data structure in mt76x02_dev one and remove duplicated code. Remove unused definition in mt76x0.h. Moreover merge mt76x0_caldata and mt76x02_rx_freq_cal data structures. This is a preliminary patch for rxwi unification. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x2: move mt76x2_dev in mt76x02_util.hLorenzo Bianconi
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev in order to be shared between mt76x2 and mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: remove hw_atomic_mutex mutex in mt76x0_devLorenzo Bianconi
Remove hw_atomic_mutex mutex in mt76x0_dev data structure since mt76x0_phy_set_channel is already protected by mt76_dev mutex while mt76x0_chip_onoff is used just at device probe or cleanup Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: remove unused variable in mt76x0_devLorenzo Bianconi
Remove no longer used mac_lock spinlock and data array in mt76x0_dev data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: mac: use sta ewma estimation for rssi trackingLorenzo Bianconi
Use shared mt76x02 utility routines for rssi tracking. Moreover remove no longer used con_mon_lock spinlock and following variable: - ap_bssid - bcn_freq_off - bcn_phy_mode - avg_rssi Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_rx_get_sta and mt76x02_rx_get_sta_wcid in mt76x02_util.hLorenzo Bianconi
Move mt76x02_rx_get_sta and mt76x02_rx_get_sta_wcid utility routines in mt76x02-lib module since it will be used by mt76x0 driver in order to unify rxwi parsing Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.cLorenzo Bianconi
Move mt76x02_phy_get_min_avg_rssi in mt76x02-lib module since it will be used by mt76x0 driver in order to unify rxwi parsing Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: init: remove unnecessary configurationsLorenzo Bianconi
Remove leftover configuration for legacy devices in mt76x0_init_mac_registers routine. Moreover remove unnecessary msleep delay Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: usb: use mt76x02u_tx_prepare_skb to fill txwiLorenzo Bianconi
Use mt76x02u_tx_prepare_skb routine to fill txwi in mt76x2u and mt76x0u driver and remove duplicated code. Moreover add static qualifier to mt76x02_mac_tx_rate_val and mt76x02_mac_fill_txwi routines Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_mac_write_txwi in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_mac_write_txwi in mt76x02_mac.c since it is shared between mt76x0 and mt76x2 drivers. This is a preliminary patch to unify txwi configuration between mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: add get_tx_txpwr_adj function pointer to mt76_driver_opsLorenzo Bianconi
Add get_tx_txpwr_adj function pointer to mt76_driver_ops data structure as a preliminary patch to unify txwi configuration between mt76x0 and mt76x2 drivers since tpc is currently supported just by mt76x2 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_tx_get_max_txpwr_adj in mt76x02_util.cLorenzo Bianconi
Move mt76x02_tx_get_max_txpwr_adj routine in mt76x02-lib module since now both mt76x0 and mt76x2 drivers read rate tx power gain from rate_power data structure. Moreover remove get_max_txpwr_adj function pointer from mt76_driver_ops data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: usb: stop cal/mac workqueues at hw stopLorenzo Bianconi
Stop mac and calibration work stopping the hw even if the device has been removed Fixes: b11e19694dc9 ("mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signature") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: usb: fix hw initialization sequenceLorenzo Bianconi
mt76u_alloc_queues need to be called before mt76u_mcu_init_rx since it initializes rx_page_lock spinlock used in mt76u_buf_alloc routine. Fixes: b11e19694dc9 ("mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signature") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: fix frag length allocation for usbStanislaw Gruszka
This is correct fix for c12128ce44b0 ("mt76: use a per rx queue page fragment cache"). We use wrong length when we allocate segments for MCU transmissions, which require bigger segment size than e->buf_size. Commit 481bb0432414 ("mt76: usb: make rx page_frag_cache access atomic") partially solved the problem or actually mask it by changing mt76u_mcu_init_rx() and mt76u_alloc_queues() sequence, so e->buf_size become non zero any longer, but still not big enough to handle MCU data. Patch fixes memory corruption which can manifest itself as random, not easy to reproduce crashes, during mt76 driver load or unload. Fixes: c12128ce44b0 ("mt76: use a per rx queue page fragment cache") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: fix header guard macro define namesColin Ian King
The header guards that are #defined are different from those being checked. Fix this by #defining them to the correct name. Fixes clang warnings: drivers/net/wireless/mediatek/mt76/mt76x02_mcu.h:17:9: warning: '__MT76x02_MCU_H' is used as a header guard here, followed by #define of a different macro [-Wheader-guard] drivers/net/wireless/mediatek/mt76/mt76x02_usb.h:17:9: warning: '__MT76x02_USB_H' is used as a header guard here, followed by #define of a different macro [-Wheader-guard] Fixes: 905db7470199 ("mt76: usb: move mt76x02 mcu code in mt76x02-usb module") Fixes: edaa580bc830 ("mt76: move shared mcu_calibrate routine in mt76x02-lib module") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x2: move mt76x2 source files to mt76x2 folderLorenzo Bianconi
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and leave just shared code in mt76 root folder Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: pci: add mt76x0e_cleanup routineLorenzo Bianconi
Add mt76x0e_cleanup routine to tidy up the device during device removal Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-10-05 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix to truncate input on ALU operations in 32 bit mode, from Jann. 2) Fixes for cgroup local storage to reject reserved flags on element update and rejection of map allocation with zero-sized value, from Roman. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05gigaset: asyncdata: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the " --v-- fall through --v-- " comment with a proper "fall through", which is what GCC is expecting to find. Addresses-Coverity-ID: 1364476 ("Missing break in switch") Addresses-Coverity-ID: 1364477 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05cxgb4: use FW_PORT_ACTION_L1_CFG32 for 32 bit capabilityGanesh Goudar
when 32 bit port capability is in use, use FW_PORT_ACTION_L1_CFG32 rather than FW_PORT_ACTION_L1_CFG. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05bpf: 32-bit RSH verification must truncate input before the ALU opJann Horn
When I wrote commit 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification"), I assumed that, in order to emulate 64-bit arithmetic with 32-bit logic, it is sufficient to just truncate the output to 32 bits; and so I just moved the register size coercion that used to be at the start of the function to the end of the function. That assumption is true for almost every op, but not for 32-bit right shifts, because those can propagate information towards the least significant bit. Fix it by always truncating inputs for 32-bit ops to 32 bits. Also get rid of the coerce_reg_to_size() after the ALU op, since that has no effect. Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-05Merge tag 'iommu-fixes-v4.19-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Joerg writes: "IOMMU Fix for Linux v4.19-rc6 One important fix: - Fix a memory leak with AMD IOMMU when SME is active and a VM has assigned devices. In that case the complete guest memory will be leaked without this fix." * tag 'iommu-fixes-v4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Clear memory encryption mask from physical address
2018-10-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmGreg Kroah-Hartman
Paolo writes: "KVM changes for 4.19-rc7 x86 and PPC bugfixes, mostly introduced in 4.19-rc1." * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: nVMX: fix entry with pending interrupt if APICv is enabled KVM: VMX: hide flexpriority from guest when disabled at the module level KVM: VMX: check for existence of secondary exec controls before accessing KVM: PPC: Book3S HV: Avoid crash from THP collapse during radix page fault KVM: x86: fix L1TF's MMIO GFN calculation tools/kvm_stat: cut down decimal places in update interval dialog KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS KVM: x86: Do not use kvm_x86_ops->mpx_supported() directly KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled KVM: x86: never trap MSR_KERNEL_GS_BASE
2018-10-05Merge branch 'linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Herbert writes: "Crypto Fixes for 4.19 This push fixes the following issues: - Out-of-bound stack access in qat. - Illegal schedule in mxs-dcp. - Memory corruption in chelsio. - Incorrect pointer computation in caam." * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - Fix KASAN stack-out-of-bounds bug in adf_probe() crypto: mxs-dcp - Fix wait logic on chan threads crypto: chelsio - Fix memory corruption in DMA Mapped buffers. crypto: caam/jr - fix ablkcipher_edesc pointer arithmetic
2018-10-05Merge tag '4.19-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Greg Kroah-Hartman
Steve writes: "SMB3 fixes four small SMB3 fixes: one for stable, the others to address a more recent regression" * tag '4.19-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: fix lease break problem introduced by compounding cifs: only wake the thread for the very last PDU in a compound cifs: add a warning if we try to to dequeue a deleted mid smb2: fix missing files in root share directory listing
2018-10-05qtnfmac: implement dump_station support for STA modeSergey Matyukevich
Current implementation of dump_station cfg80211 callback supports AP mode only. Add support for STA mode as well: by default in STA mode this callback is supposed to return AP on managed interface. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: drop redundant data copy in control pathSergey Matyukevich
Command responses and events from the firmware are copied twice in control path: at first in shm core (qtnf_shm_handle_new_data) and then in pcie bus drivers (qtnf_pcie_control_rx_callback). There is no need to copy this data twice, it can be done only once in rx callbacks. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: add support for scan dwell time configurationSergey Matyukevich
Firmware supports scan dwell time tuning for various types of scans. Enable support for this feature: - advertise capability to configure channel dwell time to host - pass scan dwell parameters to wireless card in scan request Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: add support for scan flushSergey Matyukevich
Notify firmware to flush cache before scanning when needed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: drop error reports for out-of-bounds key indexesSergey Matyukevich
On disconnect wireless core attempts to remove all the supported keys. Following cfg80211_ops conventions, firmware returns -ENOENT code for the out-of-bound key indexes. This is a normal behavior, so no need to report errors for this case. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: inform wireless core about supported extended capabilitiesSergey Matyukevich
Driver retrieves information about supported extended capabilities from wireless card. However this information is not propagated further to Linux wireless core. Fix this by setting extended capabilities fields of wiphy structure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: pass sgi rate info flag to wireless coreSergey Matyukevich
SGI should be passed to wireless core as a part of rate structure. Otherwise wireless core performs incorrect rate calculation when SGI is enabled in hardware but not reported to host. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not cancel scan in disconnect callbackIgor Mitsyanko
Do not cancel scan in disconnect callback. If there is an active scan, it will be cancelled by firmware, then host driver will be properly notified by event. Cancelling scan in disconnect callback occasionally may lead to the following race issue. Host is able to queue one scan after scan abort in disconnect callback, and another scan after scan abort in event handler. As a result, firmware receives second scan before the first scan completes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: cleanup and unify command error handlingSergey Matyukevich
Unify command error handling using qtnf_cmd_resp_result_decode function. Do not duplicate error messages in command handlers and cfg80211 callbacks: report 'cmd exec fail' only on control path internal failure. Remove redundant 'unlikely' macros. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not initialize per-MAC data multiple timesIgor Mitsyanko
Several members of pwr-MAC structure are re-initialized several times together with per-VIF initialization. Fix that and simplify the code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: request userspace to do OBSS scanning if FW can notIgor Mitsyanko
In case firmware reports that it can not do OBSS scanning for 40MHz 2.4GHz channels itself, tell userpsace to do that instead by setting NL80211_FEATURE_NEED_OBSS_SCAN flag. Signed-off-by: Igor mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: generate local disconnect event in disconnect callbackIgor Mitsyanko
When cfg80211 disconnect callback is triggered and command is processed by firmware, disconnect event with local parameter set must be sent immediately. Indicating that it's a "local" event (not from AP) will help upper layers to process this event correctly. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not track STA states in driverSergey Matyukevich
Remove STA connection states tracking from driver. Leave it wireless core on host and to firmware. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05b43: remove set but not used variable 'wl'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/b43/main.c: In function 'b43_one_core_detach': drivers/net/wireless/broadcom/b43/main.c:5496:17: warning: variable 'wl' set but not used [-Wunused-but-set-variable] After commit 644aa4d62096 ("b43: remove list of IEEE 802.11 devices") 'wl' is not used any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05ssb: chipcommon: fix fall-through annotationGustavo A. R. Silva
Replace "Fallthough" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-07-19 16:11:59 +0000