summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-21KVM: SEV: add cache flush to solve SEV cache incoherency issuesMingwei Zhang
Flush the CPU caches when memory is reclaimed from an SEV guest (where reclaim also includes it being unmapped from KVM's memslots). Due to lack of coherency for SEV encrypted memory, failure to flush results in silent data corruption if userspace is malicious/broken and doesn't ensure SEV guest memory is properly pinned and unpinned. Cache coherency is not enforced across the VM boundary in SEV (AMD APM vol.2 Section 15.34.7). Confidential cachelines, generated by confidential VM guests have to be explicitly flushed on the host side. If a memory page containing dirty confidential cachelines was released by VM and reallocated to another user, the cachelines may corrupt the new user at a later time. KVM takes a shortcut by assuming all confidential memory remain pinned until the end of VM lifetime. Therefore, KVM does not flush cache at mmu_notifier invalidation events. Because of this incorrect assumption and the lack of cache flushing, malicous userspace can crash the host kernel: creating a malicious VM and continuously allocates/releases unpinned confidential memory pages when the VM is running. Add cache flush operations to mmu_notifier operations to ensure that any physical memory leaving the guest VM get flushed. In particular, hook mmu_notifier_invalidate_range_start and mmu_notifier_release events and flush cache accordingly. The hook after releasing the mmu lock to avoid contention with other vCPUs. Cc: stable@vger.kernel.org Suggested-by: Sean Christpherson <seanjc@google.com> Reported-by: Mingwei Zhang <mizhang@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220421031407.2516575-4-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21Merge tag 'net-5.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from xfrm and can. Current release - regressions: - rxrpc: restore removed timer deletion Current release - new code bugs: - gre: fix device lookup for l3mdev use-case - xfrm: fix egress device lookup for l3mdev use-case Previous releases - regressions: - sched: cls_u32: fix netns refcount changes in u32_change() - smc: fix sock leak when release after smc_shutdown() - xfrm: limit skb_page_frag_refill use to a single page - eth: atlantic: invert deep par in pm functions, preventing null derefs - eth: stmmac: use readl_poll_timeout_atomic() in atomic state Previous releases - always broken: - gre: fix skb_under_panic on xmit - openvswitch: fix OOB access in reserve_sfa_size() - dsa: hellcreek: calculate checksums in tagger - eth: ice: fix crash in switchdev mode - eth: igc: - fix infinite loop in release_swfw_sync - fix scheduling while atomic" * tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) drivers: net: hippi: Fix deadlock in rr_close() selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets nfc: MAINTAINERS: add Bug entry net: stmmac: Use readl_poll_timeout_atomic() in atomic state doc/ip-sysctl: add bc_forwarding netlink: reset network and mac headers in netlink_dump() net: mscc: ocelot: fix broken IP multicast flooding net: dsa: hellcreek: Calculate checksums in tagger net: atlantic: invert deep par in pm functions, preventing null derefs can: isotp: stop timeout monitoring when no first frame was sent bonding: do not discard lowest hash bit for non layer3+4 hashing net: lan966x: Make sure to release ptp interrupt ipv6: make ip6_rt_gc_expire an atomic_t net: Handle l3mdev in ip_tunnel_init_flow l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu net/sched: cls_u32: fix possible leak in u32_init_knode() net/sched: cls_u32: fix netns refcount changes in u32_change() powerpc: Update MAINTAINERS for ibmvnic and VAS net: restore alpha order to Ethernet devices in config ...
2022-04-21ALSA: hda/realtek: Add quirk for Clevo NP70PNPTim Crawford
Fixes headset detection on Clevo NP70PNP. Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220421170412.3697-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-21ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDsGongjun Song
Add RaptorLake-P PCI IDs Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Gongjun Song <gongjun.song@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220421163546.319604-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-21jbd2: fix a potential race while discarding reserved buffers after an abortYe Bin
we got issue as follows: [ 72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal [ 72.826847] EXT4-fs (sda): Remounting filesystem read-only fallocate: fallocate failed: Read-only file system [ 74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay [ 74.793597] ------------[ cut here ]------------ [ 74.794203] kernel BUG at fs/jbd2/transaction.c:2063! [ 74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150 [ 74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60 [ 74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202 [ 74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90 [ 74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20 [ 74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90 [ 74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00 [ 74.807301] FS: 0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000 [ 74.808338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0 [ 74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 74.811897] Call Trace: [ 74.812241] <TASK> [ 74.812566] __jbd2_journal_refile_buffer+0x12f/0x180 [ 74.813246] jbd2_journal_refile_buffer+0x4c/0xa0 [ 74.813869] jbd2_journal_commit_transaction.cold+0xa1/0x148 [ 74.817550] kjournald2+0xf8/0x3e0 [ 74.819056] kthread+0x153/0x1c0 [ 74.819963] ret_from_fork+0x22/0x30 Above issue may happen as follows: write truncate kjournald2 generic_perform_write ext4_write_begin ext4_walk_page_buffers do_journal_get_write_access ->add BJ_Reserved list ext4_journalled_write_end ext4_walk_page_buffers write_end_fn ext4_handle_dirty_metadata ***************JBD2 ABORT************** jbd2_journal_dirty_metadata -> return -EROFS, jh in reserved_list jbd2_journal_commit_transaction while (commit_transaction->t_reserved_list) jh = commit_transaction->t_reserved_list; truncate_pagecache_range do_invalidatepage ext4_journalled_invalidatepage jbd2_journal_invalidatepage journal_unmap_buffer __dispose_buffer __jbd2_journal_unfile_buffer jbd2_journal_put_journal_head ->put last ref_count __journal_remove_journal_head bh->b_private = NULL; jh->b_bh = NULL; jbd2_journal_refile_buffer(journal, jh); bh = jh2bh(jh); ->bh is NULL, later will trigger null-ptr-deref journal_free_journal_head(jh); After commit 96f1e0974575, we no longer hold the j_state_lock while iterating over the list of reserved handles in jbd2_journal_commit_transaction(). This potentially allows the journal_head to be freed by journal_unmap_buffer while the commit codepath is also trying to free the BJ_Reserved buffers. Keeping j_state_lock held while trying extends hold time of the lock minimally, and solves this issue. Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-04-21KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUsMingwei Zhang
Use clflush_cache_range() to flush the confidential memory when SME_COHERENT is supported in AMD CPU. Cache flush is still needed since SME_COHERENT only support cache invalidation at CPU side. All confidential cache lines are still incoherent with DMA devices. Cc: stable@vger.kerel.org Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220421031407.2516575-3-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: SVM: Simplify and harden helper to flush SEV guest page(s)Sean Christopherson
Rework sev_flush_guest_memory() to explicitly handle only a single page, and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails. Per-page flushing is currently used only to flush the VMSA, and in its current form, the helper is completely broken with respect to flushing actual guest memory, i.e. won't work correctly for an arbitrary memory range. VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page walks, i.e. will fault if the address is not present in the host page tables or does not have the correct permissions. Current AMD CPUs also do not honor SMAP overrides (undocumented in kernel versions of the APM), so passing in a userspace address is completely out of the question. In other words, KVM would need to manually walk the host page tables to get the pfn, ensure the pfn is stable, and then use the direct map to invoke VM_PAGE_FLUSH. And the latter might not even work, e.g. if userspace is particularly evil/clever and backs the guest with Secret Memory (which unmaps memory from the direct map). Signed-off-by: Sean Christopherson <seanjc@google.com> Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA") Reported-by: Mingwei Zhang <mizhang@google.com> Cc: stable@vger.kernel.org Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220421031407.2516575-2-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: selftests: Silence compiler warning in the kvm_page_table_testThomas Huth
When compiling kvm_page_table_test.c, I get this compiler warning with gcc 11.2: kvm_page_table_test.c: In function 'pre_init_before_test': ../../../../tools/include/linux/kernel.h:44:24: warning: comparison of distinct pointer types lacks a cast 44 | (void) (&_max1 == &_max2); \ | ^~ kvm_page_table_test.c:281:21: note: in expansion of macro 'max' 281 | alignment = max(0x100000, alignment); | ^~~ Fix it by adjusting the type of the absolute value. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20220414103031.565037-1-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdogLike Xu
NMI-watchdog is one of the favorite features of kernel developers, but it does not work in AMD guest even with vPMU enabled and worse, the system misrepresents this capability via /proc. This is a PMC emulation error. KVM does not pass the latest valid value to perf_event in time when guest NMI-watchdog is running, thus the perf_event corresponding to the watchdog counter will enter the old state at some point after the first guest NMI injection, forcing the hardware register PMC0 to be constantly written to 0x800000000001. Meanwhile, the running counter should accurately reflect its new value based on the latest coordinated pmc->counter (from vPMC's point of view) rather than the value written directly by the guest. Fixes: 168d918f2643 ("KVM: x86: Adjust counter sample period after a wrmsr") Reported-by: Dongli Cao <caodongli@kingsoft.com> Signed-off-by: Like Xu <likexu@tencent.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Tested-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20220409015226.38619-1-likexu@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resumeWanpeng Li
MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to host-side polling after suspend/resume. Non-bootstrap CPUs are restored correctly by the haltpoll driver because they are hot-unplugged during suspend and hot-plugged during resume; however, the BSP is not hotpluggable and remains in host-sde polling mode after the guest resume. The makes the guest pay for the cost of vmexits every time the guest enters idle. Fix it by recording BSP's haltpoll state and resuming it during guest resume. Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: SPDX style and spelling fixesTom Rix
SPDX comments use use /* */ style comments in headers anad // style comments in .c files. Also fix two spelling mistakes. Signed-off-by: Tom Rix <trix@redhat.com> Message-Id: <20220410153840.55506-1-trix@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabledSean Christopherson
Skip the APICv inhibit update for KVM_GUESTDBG_BLOCKIRQ if APICv is disabled at the module level to avoid having to acquire the mutex and potentially process all vCPUs. The DISABLE inhibit will (barring bugs) never be lifted, so piling on more inhibits is unnecessary. Fixes: cae72dcc3b21 ("KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active") Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220420013732.3308816-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a raceSean Christopherson
Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an in-kernel local APIC and APICv enabled at the module level. Consuming kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens before the vCPU is fully onlined, i.e. it won't get the request made to "all" vCPUs. If APICv is globally inhibited between setting apicv_active and onlining the vCPU, the vCPU will end up running with APICv enabled and trigger KVM's sanity check. Mark APICv as active during vCPU creation if APICv is enabled at the module level, both to be optimistic about it's final state, e.g. to avoid additional VMWRITEs on VMX, and because there are likely bugs lurking since KVM checks apicv_active in multiple vCPU creation paths. While keeping the current behavior of consuming kvm_apicv_activated() is arguably safer from a regression perspective, force apicv_active so that vCPU creation runs with deterministic state and so that if there are bugs, they are found sooner than later, i.e. not when some crazy race condition is hit. WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Modules linked in: CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014 RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Call Trace: <TASK> vcpu_run arch/x86/kvm/x86.c:10039 [inline] kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234 kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a call to KVM_SET_GUEST_DEBUG. r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async) r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async) r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002) ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5}) ioctl$KVM_RUN(r2, 0xae80, 0x0) Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Fixes: 8df14af42f00 ("kvm: x86: Add support for dynamic APICv activation") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220420013732.3308816-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: nVMX: Defer APICv updates while L2 is active until L1 is activeSean Christopherson
Defer APICv updates that occur while L2 is active until nested VM-Exit, i.e. until L1 regains control. vmx_refresh_apicv_exec_ctrl() assumes L1 is active and (a) stomps all over vmcs02 and (b) neglects to ever updated vmcs01. E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv becomes unhibited while L2 is active, KVM will set various APICv controls in vmcs02 and trigger a failed VM-Entry. The kicker is that, unless running with nested_early_check=1, KVM blames L1 and chaos ensues. In all cases, ignoring vmcs02 and always deferring the inhibition change to vmcs01 is correct (or at least acceptable). The ABSENT and DISABLE inhibitions cannot truly change while L2 is active (see below). IRQ_BLOCKING can change, but it is firmly a best effort debug feature. Furthermore, only L2's APIC is accelerated/virtualized to the full extent possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR interception will apply to the virtual APIC managed by KVM. The exception is the SELF_IPI register when x2APIC is enabled, but that's an acceptable hole. Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the MSRs to L2, but for that to work in any sane capacity, L1 would need to pass through IRQs to L2 as well, and IRQs must be intercepted to enable virtual interrupt delivery. I.e. exposing Auto EOI to L2 and enabling VID for L2 are, for all intents and purposes, mutually exclusive. Lack of dynamic toggling is also why this scenario is all but impossible to encounter in KVM's current form. But a future patch will pend an APICv update request _during_ vCPU creation to plug a race where a vCPU that's being created doesn't get included in the "all vCPUs request" because it's not yet visible to other vCPUs. If userspaces restores L2 after VM creation (hello, KVM selftests), the first KVM_RUN will occur while L2 is active and thus service the APICv update request made during VM creation. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220420013732.3308816-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabledSean Christopherson
Set the DISABLE inhibit, not the ABSENT inhibit, if APICv is disabled via module param. A recent refactoring to add a wrapper for setting/clearing inhibits unintentionally changed the flag, probably due to a copy+paste goof. Fixes: 4f4c4a3ee53c ("KVM: x86: Trace all APICv inhibit changes and capture overall status") Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220420013732.3308816-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: Initialize debugfs_dentry when a VM is created to avoid NULL derefSean Christopherson
Initialize debugfs_entry to its semi-magical -ENOENT value when the VM is created. KVM's teardown when VM creation fails is kludgy and calls kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never attempted kvm_create_vm_debugfs(). Because debugfs_entry is zero initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__dentry_path+0x7b/0x130 Call Trace: <TASK> dentry_path_raw+0x42/0x70 kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm] kvm_put_kvm+0x63/0x2b0 [kvm] kvm_dev_ioctl+0x43a/0x920 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Modules linked in: kvm_intel kvm irqbypass Fixes: a44a4cc1c969 ("KVM: Don't create VM debugfs files outside of the VM directory") Cc: stable@vger.kernel.org Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oupton@google.com> Reported-by: syzbot+df6fbbd2ee39f21289ef@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20220415004622.2207751-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abusedSean Christopherson
Add wrappers to acquire/release KVM's SRCU lock when stashing the index in vcpu->src_idx, along with rudimentary detection of illegal usage, e.g. re-acquiring SRCU and thus overwriting vcpu->src_idx. Because the SRCU index is (currently) either 0 or 1, illegal nesting bugs can go unnoticed for quite some time and only cause problems when the nested lock happens to get a different index. Wrap the WARNs in PROVE_RCU=y, and make them ONCE, otherwise KVM will likely yell so loudly that it will bring the kernel to its knees. Signed-off-by: Sean Christopherson <seanjc@google.com> Tested-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220415004343.2203171-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copySean Christopherson
Use the generic kvm_vcpu's srcu_idx instead of using an indentical field in RISC-V's version of kvm_vcpu_arch. Generic KVM very intentionally does not touch vcpu->srcu_idx, i.e. there's zero chance of running afoul of common code. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220415004343.2203171-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()Sean Christopherson
Don't re-acquire SRCU in complete_emulated_io() now that KVM acquires the lock in kvm_arch_vcpu_ioctl_run(). More importantly, don't overwrite vcpu->srcu_idx. If the index acquired by complete_emulated_io() differs from the one acquired by kvm_arch_vcpu_ioctl_run(), KVM will effectively leak a lock and hang if/when synchronize_srcu() is invoked for the relevant grace period. Fixes: 8d25b7beca7e ("KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220415004343.2203171-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21Merge tag 'kvm-riscv-fixes-5.18-2' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini
into HEAD KVM/riscv fixes for 5.18, take #2 - Remove 's' & 'u' as valid ISA extension - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
2022-04-21fs: unset MNT_WRITE_HOLD on failureChristian Brauner
After mnt_hold_writers() has been called we will always have set MNT_WRITE_HOLD and consequently we always need to pair mnt_hold_writers() with mnt_unhold_writers(). After the recent cleanup in [1] where Al switched from a do-while to a for loop the cleanup currently fails to unset MNT_WRITE_HOLD for the first mount that was changed. Fix this and make sure that the first mount will be cleaned up and add some comments to make it more obvious. Link: https://lore.kernel.org/lkml/0000000000007cc21d05dd0432b8@google.com Link: https://lore.kernel.org/lkml/00000000000080e10e05dd043247@google.com Link: https://lore.kernel.org/r/20220420131925.2464685-1-brauner@kernel.org Fixes: e257039f0fc7 ("mount_setattr(): clean the control flow and calling conventions") [1] Cc: Hillf Danton <hdanton@sina.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: syzbot+10a16d1c43580983f6a2@syzkaller.appspotmail.com Reported-by: syzbot+306090cfa3294f0bbfb3@syzkaller.appspotmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-04-21drm/amdgpu: partial revert "remove ctx->lock" v2Christian König
This reverts commit 461fa7b0ac565ef25c1da0ced31005dd437883a7. We are missing some inter dependencies here so re-introduce the lock until we have figured out what's missing. Just drop/retake it while adding dependencies. v2: still drop the lock while adding dependencies Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> (v1) Fixes: 461fa7b0ac56 ("drm/amdgpu: remove ctx->lock") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220419110633.166236-1-christian.koenig@amd.com
2022-04-21drivers: net: hippi: Fix deadlock in rr_close()Duoming Zhou
There is a deadlock in rr_close(), which is shown below: (Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-21ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook ↵Andy Chi
845/865 G9 On HP EliteBook 845 G9 and EliteBook 865 G9, the audio LEDs can be enabled by ALC285_FIXUP_HP_MUTE_LED. So use it accordingly. Signed-off-by: Andy Chi <andy.chi@canonical.com> Fixes: 07bcab93946c ("ALSA: hda/realtek: Add support for HP Laptops") Link: https://lore.kernel.org/r/20220421063606.39772-1-andy.chi@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-21Revert "drm: of: Lookup if child node has panel or bridge"Bjorn Andersson
Commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")' attempted to simplify the case of expressing a simple panel under a DSI controller, by assuming that the first non-graph child node was a panel or bridge. Unfortunately for non-trivial cases the first child node might not be a panel or bridge. Examples of this can be a aux-bus in the case of DisplayPort, or an opp-table represented before the panel node. In these cases the reverted commit prevents the caller from ever finding a reference to the panel. This reverts commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")', in favor of using an explicit graph reference to the panel in the trivial case as well. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-2-bjorn.andersson@linaro.org
2022-04-21Revert "drm: of: Properly try all possible cases for bridge/panel detection"Bjorn Andersson
Commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")' introduced the ability to describe a panel under a display controller without having to use a graph to connect the controller to its single child panel (or bridge). The implementation of this would find the first non-graph node and attempt to acquire the related panel or bridge. This prevents cases where any other child node, such as a aux bus for a DisplayPort controller, or an opp-table to find the referenced panel. Commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")' attempted to solve this problem by not bypassing the graph reference lookup before attempting to find the panel or bridge. While this does solve the case where a proper graph reference is present, it does not allow the caller to distinguish between a yet-to-be-probed panel or bridge and the absence of a reference to a panel. One such case is a DisplayPort controller that on some boards have an explicitly described reference to a panel, but on others have a discoverable DisplayPort display attached (which doesn't need to be expressed in DeviceTree). This reverts commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")', as a step towards reverting commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")'. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-1-bjorn.andersson@linaro.org
2022-04-21drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usageMiaoqian Lin
If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1. Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync() fails, so use pm_runtime_resume_and_get() instead. this function will handle this. Fixes: 4078f5757144 ("drm/vc4: Add DSI driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420135008.2757-1-linmq006@gmail.com
2022-04-20cifs: destage any unwritten data to the server before calling copychunk_writeRonnie Sahlberg
because the copychunk_write might cover a region of the file that has not yet been sent to the server and thus fail. A simple way to reproduce this is: truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with the 'fcollapse 16k 24k' due to write-back caching. fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call and it will fail serverside since the file is still 0b in size serverside until the writes have been destaged. To avoid this we must ensure that we destage any unwritten data to the server before calling COPYCHUNK_WRITE. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373 Reported-by: Xiaoli Feng <xifeng@redhat.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-20cifs: use correct lock type in cifs_reconnect()Paulo Alcantara
TCP_Server_Info::origin_fullpath and TCP_Server_Info::leaf_fullpath are protected by refpath_lock mutex and not cifs_tcp_ses_lock spinlock. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-20cifs: fix NULL ptr dereference in refresh_mounts()Paulo Alcantara
Either mount(2) or automount might not have server->origin_fullpath set yet while refresh_cache_worker() is attempting to refresh DFS referrals. Add missing NULL check and locking around it. This fixes bellow crash: [ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10 [ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150 [ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44 [ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246 [ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000 [ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27 [ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000 [ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000 [ 1070.284990] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000 [ 1070.285625] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0 [ 1070.286683] Call Trace: [ 1070.286890] <TASK> [ 1070.287070] refresh_cache_worker+0x895/0xd20 [cifs] [ 1070.287475] ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs] [ 1070.287905] ? __lock_acquire+0xcd1/0x6960 [ 1070.288247] ? is_dynamic_key+0x1a0/0x1a0 [ 1070.288591] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 1070.289012] ? lock_downgrade+0x6f0/0x6f0 [ 1070.289318] process_one_work+0x7bd/0x12d0 [ 1070.289637] ? worker_thread+0x160/0xec0 [ 1070.289970] ? pwq_dec_nr_in_flight+0x230/0x230 [ 1070.290318] ? _raw_spin_lock_irq+0x5e/0x90 [ 1070.290619] worker_thread+0x5ac/0xec0 [ 1070.290891] ? process_one_work+0x12d0/0x12d0 [ 1070.291199] kthread+0x2a5/0x350 [ 1070.291430] ? kthread_complete_and_exit+0x20/0x20 [ 1070.291770] ret_from_fork+0x22/0x30 [ 1070.292050] </TASK> [ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4 [ 1070.292765] ---[ end trace 0000000000000000 ]--- [ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150 [ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44 [ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246 [ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000 [ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27 [ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000 [ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000 [ 1070.302645] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000 [ 1070.303462] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0 [ 1070.305004] Kernel panic - not syncing: Fatal exception [ 1070.305711] Kernel Offset: disabled [ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-20drm/vmwgfx: Fix gem refcounting and memory evictionsZack Rusin
v2: Add the last part of the ref count fix which was spotted by Philipp Sieweck where the ref count of cpu writers is off due to ERESTARTSYS or EBUSY during bo waits. The initial GEM port broke refcounting on shareable (prime) surfaces and memory evictions. The prime surfaces broke because the parent surfaces weren't increasing the ref count on GEM surfaces, which meant that the memory backing textures could have been deleted while the texture was still accessible. The evictions broke due to a typo, the code was supposed to exit if the passed buffers were not vmw_buffer_object not if they were. They're tied because the evictions depend on having memory to actually evict. This fixes crashes with XA state tracker which is used for xrender acceleration on xf86-video-vmware, apps/tests which use a lot of memory (a good test being the piglit's streaming-texture-leak) and desktops. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM") Reported-by: Philipp Sieweck <psi@informatik.uni-kiel.de> Cc: <stable@vger.kernel.org> # v5.17+ Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220420040328.1007409-1-zack@kde.org
2022-04-20xen: Convert kmap() to kmap_local_page()Alaa Mohamed
kmap() is being deprecated and these usages are all local to the thread so there is no reason kmap_local_page() can't be used. Replace kmap() calls with kmap_local_page(). Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220419234328.10346-1-eng.alaamohamedsoliman.am@gmail.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-04-20Merge tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull xtensa fixes from Max Filippov: - fix patching CPU selection in patch_text - fix potential deadlock in ISS platform serial driver - fix potential register clobbering in coprocessor exception handler * tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: fix a7 clobbering in coprocessor context load/store arch: xtensa: platforms: Fix deadlock in rs_close() xtensa: patch_text: Fixup last cpu should be master
2022-04-20Merge tag 'erofs-for-5.18-rc4-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "One patch to fix a use-after-free race related to the on-stack z_erofs_decompressqueue, which happens very rarely but needs to be fixed properly soon. The other patch fixes some sysfs Sphinx warnings" * tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors erofs: fix use-after-free of on-stack io[]
2022-04-20Revert "fs/pipe: use kvcalloc to allocate a pipe_buffer array"Linus Torvalds
This reverts commit 5a519c8fe4d620912385f94372fc8472fa98c662. It turns out that making the pipe almost arbitrarily large has some rather unexpected downsides. The kernel test robot reports a kernel warning that is due to pipe->max_usage now growing to the point where the iter_file_splice_write() buffer allocation can no longer be satisfied as a slab allocation, and the int nbufs = pipe->max_usage; struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec), GFP_KERNEL); code sequence there will now always fail as a result. That code could be modified to use kvcalloc() too, but I feel very uncomfortable making those kinds of changes for a very niche use case that really should have other options than make these kinds of fundamental changes to pipe behavior. Maybe the CRIU process dumping should be multi-threaded, and use multiple pipes and multiple cores, rather than try to use one larger pipe to minimize splice() calls. Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/ Cc: Andrei Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-20x86: __memcpy_flushcache: fix wrong alignment if size > 2^32Mikulas Patocka
The first "if" condition in __memcpy_flushcache is supposed to align the "dest" variable to 8 bytes and copy data up to this alignment. However, this condition may misbehave if "size" is greater than 4GiB. The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both arguments to unsigned int and selects the smaller one. However, the cast truncates high bits in "size" and it results in misbehavior. For example: suppose that size == 0x100000001, dest == 0x200000002 min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1; ... dest += 0x1; so we copy just one byte "and" dest remains unaligned. This patch fixes the bug by replacing unsigned with size_t. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-20selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packetsIdo Schimmel
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packetsIdo Schimmel
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20ALSA: usb-audio: Clear MIDI port active flag after drainingTakashi Iwai
When a rawmidi output stream is closed, it calls the drain at first, then does trigger-off only when the drain returns -ERESTARTSYS as a fallback. It implies that each driver should turn off the stream properly after the drain. Meanwhile, USB-audio MIDI interface didn't change the port->active flag after the drain. This may leave the output work picking up the port that is closed right now, which eventually leads to a use-after-free for the already released rawmidi object. This patch fixes the bug by properly clearing the port->active flag after the output drain. Reported-by: syzbot+70e777a39907d6d5fd0a@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/00000000000011555605dceaff03@google.com Link: https://lore.kernel.org/r/20220420130247.22062-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-20dt-bindings: dmaengine: qcom: gpi: Add minItems for interruptsVinod Koul
Add the minItems for interrupts property as well. In the absence of this, we get warning if interrupts are less than 13 arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb: dma-controller@800000: interrupts: [[0, 588, 4], [0, 589, 4], [0, 590, 4], [0, 591, 4], [0, 592, 4], [0, 593, 4], [0, 594, 4], [0, 595, 4], [0, 596, 4], [0, 597, 4]] is too short Signed-off-by: Vinod Koul <vkoul@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220414064235.1182195-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20nfc: MAINTAINERS: add Bug entryKrzysztof Kozlowski
Add a Bug section, indicating preferred mailing method for bug reports, to NFC Subsystem entry. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20dmaengine: idxd: skip clearing device context when device is read-onlyDave Jiang
If the device shows up as read-only configuration, skip the clearing of the state as the context must be preserved for device re-enable after being disabled. Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device") Reported-by: Tony Zhu <tony.zhu@intel.com> Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971479479.2200566.13980022473526292759.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: add RO check for wq max_transfer_size writeDave Jiang
Block wq_max_transfer_size_store() when the device is configured as read-only and not configurable. Fixes: d7aad5550eca ("dmaengine: idxd: add support for configurable max wq xfer size") Reported-by: Bernice Zhang <bernice.zhang@intel.com> Tested-by: Bernice Zhang <bernice.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971488154.2200913.10706665404118545941.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: add RO check for wq max_batch_size writeDave Jiang
Block wq_max_batch_size_store() when the device is configured as read-only and not configurable. Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size") Reported-by: Bernice Zhang <bernice.zhang@intel.com> Tested-by: Bernice Zhang <bernice.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/164971493551.2201159.1942042593642155209.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: fix retry value to be constant for duration of function callDave Jiang
When retries is compared to wq->enqcmds_retries each loop of idxd_enqcmds(), wq->enqcmds_retries can potentially changed by user. Assign the value of retries to wq->enqcmds_retries during initialization so it is the original value set when entering the function. Fixes: 7930d8553575 ("dmaengine: idxd: add knob for enqcmds retries") Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165031760154.3658664.1983547716619266558.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: idxd: match type for retries var in idxd_enqcmds()Dave Jiang
wq->enqcmds_retries is defined as unsigned int. However, retries on the stack is defined as int. Change retries to unsigned int to compare the same type. Fixes: 7930d8553575 ("dmaengine: idxd: add knob for enqcmds retries") Suggested-by: Thiago Macieira <thiago.macieira@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165031747059.3658198.6035308204505664375.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20dmaengine: dw-edma: Fix inconsistent indentingJiapeng Chong
Eliminate the follow smatch warning: drivers/dma/dw-edma/dw-edma-v0-core.c:419 dw_edma_v0_core_start() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220413023442.18856-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20net: stmmac: Use readl_poll_timeout_atomic() in atomic stateKevin Hao
The init_systime() may be invoked in atomic state. We have observed the following call trace when running "phc_ctl /dev/ptp0 set" on a Intel Agilex board. BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [<ffff80000892ef78>] stmmac_set_time+0x34/0x8c CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567 Hardware name: SoCFPGA Agilex SoCDK (DT) Call trace: dump_backtrace.part.0+0xc4/0xd0 show_stack+0x24/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x154/0x1c0 __might_sleep+0x58/0x90 init_systime+0x78/0x120 stmmac_set_time+0x64/0x8c ptp_clock_settime+0x60/0x9c pc_clock_settime+0x6c/0xc0 __arm64_sys_clock_settime+0x88/0xf0 invoke_syscall+0x5c/0x130 el0_svc_common.constprop.0+0x4c/0x100 do_el0_svc+0x7c/0xa0 el0_svc+0x58/0xcc el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 So we should use readl_poll_timeout_atomic() here instead of readl_poll_timeout(). Also adjust the delay time to 10us to fix a "__bad_udelay" build error reported by "kernel test robot <lkp@intel.com>". I have tested this on Intel Agilex and NXP S32G boards, there is no delay needed at all. So the 10us delay should be long enough for most cases. Fixes: ff8ed737860e ("net: stmmac: use readl_poll_timeout() function in init_systime()") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20doc/ip-sysctl: add bc_forwardingNicolas Dichtel
Let's describe this sysctl. Fixes: 5cbf777cfdf6 ("route: add support for directed broadcast forwarding") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20RISC-V: KVM: Restrict the extensions that can be disabledAtish Patra
Currently, the config isa register allows us to disable all allowed single letter ISA extensions. It shouldn't be the case as vmm shouldn't be able to disable base extensions (imac). These extensions should always be enabled as long as they are enabled in the host ISA. Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Fixes: 92ad82002c39 ("RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls")
generated by cgit (git 2.34.1) at 2025-07-16 18:00:45 +0000