Age | Commit message (Collapse) | Author |
|
The c630 exposes its debug UART via a connector on the PCB, enable it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-2-496b581935c1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The VCC and VCCA supplies of the DSI<->eDP bridge are derived from
vreg_l2a_1p2 and controlled by a GPIO on the PMIC. Add the regulator
here so Linux can control it.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-1-496b581935c1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing property to fix the dt checker warning:
qcom/sc8180x-primus.dtb: l3-cache: 'cache-unified' is a required property
Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-7-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing OVP interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['short'] is too short
Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-6-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing OVP interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['short'] is too short
Fixes: 0d97fdf380b4 ("arm64: dts: qcom: Add configuration for PMI8950 peripheral")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-5-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing short interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['ovp'] is too short
Fixes: 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-4-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing short interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['ovp'] is too short
Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-3-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Panel bindings (boe,nv133fhm-n61) require supply which here actually can
be turned on/off via GPIO control:
sdm850-lenovo-yoga-c630.dtb: panel: 'power-supply' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230617171512.286795-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-10-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add cpu cooling maps for passive trip points. The cpu cooling
device states are mapped to cpufreq based scaling frequencies.
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Link: https://lore.kernel.org/r/20230713083101.971525-2-quic_ipkumar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the MDSS cfg-cpu bus vote on the SM8450 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230712121145.1994830-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
gpio-keys,wakeup is a deprecated property:
m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Fixes: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711063011.16222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add and assign RPM regulators coming from PM2250.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-rb1_regulator-v1-1-bc4398c35800@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
ChromeOS folks reported that bwmon is too slow and getting rid of
statically defined CPUFREQ-based votes (effectively floor votes because of
how opp-peak-kBps is interpreted), has a major performance impact in some
common applications. Bring them back until MEMLAT support is introduced.
This is a partial revert of the commit referenced in the fixes tag.
Fixes: adc16b84e1ea ("arm64: dts: qcom: sc7180: Hook up BWMONs")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-7180ddr-v1-1-56e4f13afe9b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm6350.
There are 3 more NPU BWMONs, but these are skipped for now.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-4-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm8250.
LPDDR4X levels are skipped, as LPDDR5 seems more popular with SM8250 and
voting for inexistent levels doesn't uptick the bus frequency, which
results in no increased bandwidth, which results in bwmon deciding we
shouldn't go higher.. you see the point!
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-3-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Turn CBF into the interconnect provider. Scale CBF frequency (bandwidth)
according to CPU frequencies.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512001334.2983048-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The SMMUs on SM8250 are cache-coherent. Mark them as such.
Fixes: a89441fcd09d ("arm64: dts: qcom: sm8250: add apps_smmu node")
Fixes: 04a3605b184e ("arm64: dts: qcom: add sm8250 GPU nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-2-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The PCIe hosts on SM8250 are cache-coherent. Mark them as such.
Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-1-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add thermal zones controlled through the ADC-TM (ADC thermal monitoring)
PMIC interface. This includes several onboard sensors and the XO thermal
sensor.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Declare the DIE_TEMP channels provided by PMICs. Use them to provide
temperature reading for the spmi-temp-alarm thermal zones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The 8450-HDK doesn't use PMR735B PMIC. Drop its inclusion to remove the
warning during the HDK bootup.
Fixes: 30464456a1ea ("arm64: dts: qcom: sm8450-hdk: add pmic files")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The commit b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for
pmk8350") for the ADC TM (thermal monitoring device) have used the
compatible string from the vendor kernel ("qcom,adc-tm7"). Use the
proper compatible string that is defined in the upstream kernel
("qcom,spmi-adc-tm5-gen2").
Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts
with the thermal zone in pmr735a.dtsi. Rename the thermal zone according
to the chip name.
Fixes: 6f3426b3dea4 ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.
Fixes: 5c1399299d9d ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.
Fixes: 7a79b95f4288 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Kryo names (once again) turned out to be fake. The CPUs report:
0x412fd050 (CA55 r2p0) (0 - 3)
0x411fd410 (CA78 r1p1) (4 - 6)
0x411fd440 (CX1 r1p1) (7)
Use the compatibles that reflect that.
Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230706-topic-sm8350-cpu-compat-v1-1-f8d6a1869781@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The value was copypasted from 8150, but 8180 expects a different one.
Confirmed with both downstream device tree and Windows DSDT, not tested
on hardware (sorry, I don't have any).
Fix it.
Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230705-topic-8180_sleep-v1-1-c5dce117364e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705144226.280490-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing interrupts that communicate the hardware-managed
throttling to Linux.
Fixes: ccbb3abb23a5 ("arm64: dts: qcom: sm8350: Add cpufreq node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-3-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The present values look to have been copypasted from 8150 or 8180.
Fix that.
Fixes: 07ddb302811e ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-2-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SM8350's cores can be shut off, without engaging full-on SoC-wide power
collapse. Add the missing idle state to allow for that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-1-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add reserve gpios for QRU1000 IDP platform. These gpios are
needed for modem subsystem.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705091730.32087-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add reserve gpios for QDU1000 IDP platform. These gpios are
needed for modem subsystem.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705091730.32087-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230702185051.43867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The RPMCC node should be fed a reference to the XO fixed clock.
Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230627-topic-98_rpmcc-v1-1-4024e43ad0fc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
UART6 is used for debug (routed via uSD pins) and UART9 is connected
to the bluetooth chip.
Set indexed aliases to make the GENI UART driver happy and route serial
traffic through the debug uart by default.
Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230627-topic-tama_uart-v1-1-0fa790248db8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The interrupt line was previously not described. Take care of that.
Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-11-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'pin-switch-delay-us' is not used anywhere in the mainline kernel.
Drop it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-4-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing property to fix the dt checker warning:
qcom/apq8039-t2.dtb: l2-cache: 'cache-unified' is a required property
Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-3-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As of today, the only cool and legal way to get ARM64 SMP going is
via PSCI (or spin tables). Sadly, not all chip and device vendors were
considerate of this in the early days of arm64. Qualcomm, for example
reused their tried-and-true spin-up method from MSM8974 and their Krait/
arm32 Cortex designs.
MSM8916 supports SMP with its arm32 dt overlay, as probably could 8939.
But the arm64 DT should not define non-PSCI SMP or CPUidle stuff.
Drop the qcom,idle-state-spc compatible (associated with Qualcomm-specific
CPUIdle) to make the dt checker happy:
apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:
['qcom,idle-state-spc', 'arm,idle-state'] is too long
Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Benjamin Li <benl@squareup.com>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-2-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI
nodes") broke reg-names, possibly with search-and-replace. Fix it.
Fixes: 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-1-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. They will be replaced with a dynamic, bwmon-style
decision maker once support for MEMLAT is introduced upstream.
Available values from the HW LUT:
300000
556800
652800
768000
844800
921600
1171200
1382400
1497600
This commit dramatically improves overall performance of the system.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-6375_l3-v1-1-9cb03ef05150@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Unless explicitly specified the interrupt-parent property is inherited
from the parent node on Linux even though this may not be in full
compliance with the devicetree specification.
Following commit 2d5cab9232ba ("arm64: dts: qcom: sc8280xp-pmics:
Specify interrupt parent explicitly"), add an explicit interrupt parent
also for the PMIC RTC node for the benefit of other operating systems
which may be confused by this omission.
Note that any such OS must still implement a fallback to the root
interrupt domain as most devicetrees are written under the assumption
that the interrupt parent is inherited.
Reported-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627085306.6033-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With the ICE driver now merged let's convert the ufs node to use the new
style.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221209-dt-binding-ufs-v5-5-c9a58c0a53f5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The defined value for "status" is "disabled", not "disable".
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626220957.3945972-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
into arm64-for-6.6
Merge a set of new SC8280XP GCC GDSC constants from a topic branch,
in order to allow them being used in DeviceTree source.
|
|
There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.
Fixes: a66a82f2a55e ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Define the themal zones using the temperature values found in the
downstream 4.9 sources so that the spmi-temp-alarm driver becomes
active.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230625-pm8953-thermal-v1-1-2b4247d2f769@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|