summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-15arm64: dts: qcom: sdm670: Add PDCKonrad Dybcio
Add support for the PDC to enable deep sleep wakeup from external sources. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811-topic-tlmm_wakeup-v1-2-5616a7da1fff@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: msm8916-samsung-e5: Add touchscreenLin, Meng-Bo
Similar to A5, E5 uses a Melfas MMS345L touchscreen that is connected to blsp_i2c5. Add it to the device tree. Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230812071448.4710-1-linmengbo0689@protonmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sc7180: Split up TF-A related PSCI configurationNikita Travkin
When initially submitted, the sc7180 support only targeted CROS devices that make use of alternative TF-A firmware and not the official Qualcomm firmware. The PSCI implementations in those firmwares differ however so devices that use qcom firmware, like WoA laptops such as aspire1 need different setup. This commit adjusts the SoC dtsi to the OSI mode PSCI setup, common to the Qualcomm firmware and introduces new sc7180-firmware-tfa.dtsi that overrides the PSCI setup for the PC mode and uses TF-A specific psci-suspend-param. This dtsi is added to all boards that appear to use TF-A. Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20230808-sc7180-tfa-fw-v1-1-666d5d8467e5@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sc8280xp-x13s: Add camera activity LEDKonrad Dybcio
Disappointigly, the camera activity LED is implemented in software. Hook it up as a gpio-led and (until we have camera *and* a "camera on" LED trigger) configure it as a panic indicator. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230805-topic-x13s_cam_led-v1-1-443d752158c4@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pinsKonrad Dybcio
Pins 83-86 and 158-160 are NC, so there's no point in keeping them reserved. Take care of that. Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803-topic-x13s_pin-v1-1-fae792274e89@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: msm8998: Add DPU1 nodesAngeloGioacchino Del Regno
Add the required nodes to support the display hardware on msm8998. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [konrad: update the commit msg and AGdR's email, rebase] Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230805-topic-8998_dpu-v1-1-9d402dc1ecc0@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: msm8996: Fix dsi1 interruptsDavid Wronek
Fix IRQ flags mismatch which was keeping dsi1 from probing by changing interrupts = <4> to interrupts = <5>. Fixes: 2752bb7d9b58 ("arm64: dts: qcom: msm8996: add second DSI interface") Signed-off-by: David Wronek <davidwronek@gmail.com> Acked-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230805130936.359860-2-davidwronek@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sdx75-idp: Add regulator nodesRohit Agarwal
Add all the regulators along with labels found on SDX75 IDP. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-10-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sdx75: Add rpmhpd nodeRohit Agarwal
Add rpmhpd node and opps for this node to the SDX75 dts. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-9-git-send-email-quic_rohiagar@quicinc.com [bjorn: include qcom-rpmpd.h as well] Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75Rohit Agarwal
SDX75-idp features pmk8550, pmx75 and pm7550ba pmic, so include them. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-8-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: Add pmx75 PMIC dtsiRohit Agarwal
Add dtsi for pmx75 PMIC found in Qualcomm platforms. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-6-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: Add pm7550ba PMIC dtsiRohit Agarwal
Add dtsi for pm7550ba PMIC found in Qualcomm platforms. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Link: https://lore.kernel.org/r/1691415534-31820-5-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: Add pinctrl gpio support for pm7250bRohit Agarwal
Add pinctrl gpio dts node for pm7250b. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-4-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sdx75: Add spmi nodeRohit Agarwal
Add SPMI node to SDX75 dtsi. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-3-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMUKonrad Dybcio
The MMSS SMMU has its own power domain. Attach it so that we can drop the "keep it always-on" hack. Fixes: 05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu") Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-2-ba1b1fd9ee75@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: msm8998: Drop bus clock reference from MMSS SMMUKonrad Dybcio
The MMSS SMMU has been abusingly consuming the exposed RPM interconnect clock. Drop it. Fixes: 05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu") Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-1-ba1b1fd9ee75@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sm8450: Add RPMh statsKonrad Dybcio
SM8450 also exposes RPMh stats, hook them up for low power state monitoring. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811-topic-8450_stats-v1-1-f26ae3fdf2cf@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: msm8998: Use the correct GPLL0_DIV leg for MMCCKonrad Dybcio
MMCC has its own GPLL0 legs - one for 1-1 and one for div-2 output. We've already been using the correct one in the non-div case, start doing so for the other one as well. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-8-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: msm8998: Use the correct GPLL0 leg for GPUCCKonrad Dybcio
GPUCC has its own GPLL0 leg, switch to it to allow shutting it down when it's unused. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-7-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13Merge branch '20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org' into ↵Bjorn Andersson
arm64-for-6.6 Merge additional MSM8998 GCC DeviceTree binding constants for use in the MSM8998 DeviceTree source.
2023-08-13dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legsKonrad Dybcio
GPLL0 has two separate outputs to both GPUSS and MMSS: one that's 2-divided and one that runs at the same rate as the GPLL0 itself. Add the missing ones to the binding. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: ipq5332: enable GPIO based LEDs and ButtonsSridharan S N
Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35. Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230616083238.20690-2-quic_sridsn@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: sm8450: Add PRNGKonrad Dybcio
Add the Qualcomm Pseudo-Random Number Generator. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811-topic-8450_prng-v1-3-01becceeb1ee@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: apq8016-sbc: Enable camss for non-mezzanine casesBryan O'Donoghue
When we have no camera mezzanine attached it is still possible to run the test-pattern generator of the CSID block. As an example: media-ctl --reset yavta --no-query -w '0x009f0903 1' /dev/v4l-subdev2 yavta --list /dev/v4l-subdev2 media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:UYVY8_1X16/1920x1080 field:none]' media-ctl -l '"msm_csid0":1->"msm_ispif0":0[1]' media-ctl -d /dev/media0 -V '"msm_ispif0":0[fmt:UYVY8_1X16/1920x1080 field:none]' media-ctl -l '"msm_ispif0":1->"msm_vfe0_rdi0":0[1]' media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:UYVY8_1X16/1920x1080]' media-ctl -d /dev/media0 -p yavta -B capture-mplane --capture=5 -n 5 -I -f UYVY -s 1920x1080 --file=TPG-UYVU-1920x1080-000-#.bin /dev/video0 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230811234738.2859417-8-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: apq8016-sbc-d3-camera-mezzanine: Move default ov5640 to a ↵Bryan O'Donoghue
standalone dts At the moment we define a single ov5640 sensor in the apq8016-sbc and disable that sensor. The sensor mezzanine for this is a D3 Engineering Dual ov5640 mezzanine card. Move the definition from the apq8016-sbc where it shouldn't be to a standalone dts. Enables the sensor by default, as we are adding a standalone mezzanine structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811234738.2859417-7-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: apq8016-sbc: Rename ov5640 enable-gpios to powerdown-gpiosBryan O'Donoghue
There are two control lines controlled by GPIO going into ov5640 - Reset - Powerdown The driver and yaml expect "reset-gpios" and "powerdown-gpios" there has never been an "enable-gpios". Fixes: 39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811234738.2859417-6-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: apq8016-sbc: Set ov5640 assigned-clockBryan O'Donoghue
The driver for the ov5640 doesn't do a set-rate, instead it expects the clock to already be set at an appropriate rate. Similarly the yaml for ov5640 doesn't understand clock-frequency. Convert from clock-rate to assigned-clock and assigned-clock-rate to remediate. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811234738.2859417-5-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: apq8016-sbc: Fix ov5640 data-lanes declarationBryan O'Donoghue
The yaml constraint for data-lanes is [1, 2] not [0, 2]. The driver itself doesn't do anything with the data-lanes declaration save count the number of specified data-lanes and calculate the link rate so, this change doesn't have any functional side-effects. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230811234738.2859417-4-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: apq8016-sbc: Fix ov5640 regulator supply namesBryan O'Donoghue
The ov5640 driver expects DOVDD, AVDD and DVDD as regulator supply names. The ov5640 has depended on these names since the driver was committed upstream in 2017. Similarly apq8016-sbc.dtsi has had completely different regulator names since its own initial commit in 2020. Perhaps the regulators were left on in previous 410c bootloaders. In any case today on 6.5 we won't switch on the ov5640 without correctly naming the regulators. Fixes: 39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811234738.2859417-3-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-13arm64: dts: qcom: msm8916: Define CAMSS ports in core dtsiBryan O'Donoghue
Each CSIPHY in CAMMS maps to a port here in the dtsi, since the number of CSIPHYs is fixed per SoC define the 8916 ports for both available PHYs. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811234738.2859417-2-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: Add ipq5018 SoC and rdp432-c2 board supportSricharan Ramabadhran
Add initial device tree support for the Qualcomm IPQ5018 SoC and rdp432-c2 board. Few things like 'reboot' does not work because, couple of more 'SCM' APIS are needed to clear some TrustZone settings. Those will be posted separately. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-6-git-send-email-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11dt-bindings: qcom: Add ipq5018 bindingsSricharan Ramabadhran
Document the new ipq5018 SOC/board device tree bindings. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-4-git-send-email-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11Merge branch '1690533192-22220-2-git-send-email-quic_srichara@quicinc.com' ↵Bjorn Andersson
into arm64-for-6.6 Merge the IPQ5018 GCC Devicetree binding through a topic branch, in order to the the clock defines.
2023-08-11dt-bindings: clock: Add IPQ5018 clock and resetSricharan Ramabadhran
This patch adds support for the global clock controller found on the IPQ5018 based devices. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-2-git-send-email-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: enable EMAC1Bartosz Golaszewski
Enable the second MAC on sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-10-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: add an alias for ethernet0Bartosz Golaszewski
Once we add a second ethernet node, the MDIO bus names will conflict unless we provide aliases. Add one for the existing ethernet node. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-9-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: sort aliases alphabeticallyBartosz Golaszewski
For improved readability order the aliases alphabetically for sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-8-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: add the second SGMII PHYBartosz Golaszewski
Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-7-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: index the first SGMII PHYBartosz Golaszewski
We'll be adding a second SGMII PHY on the same MDIO bus, so let's index the first one for better readability. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-6-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: move the reset-gpios property of the PHYBartosz Golaszewski
Device-tree bindings for MDIO define per-PHY reset-gpios as well as a global reset-gpios property at the MDIO node level which controls all devices on the bus. The latter is most likely a workaround for the chicken-and-egg problem where we cannot read the ID of the PHY before bringing it out of reset but we cannot bring it out of reset until we've read its ID. I have proposed a comprehensive solution for this problem in 2020 but it never got upstream. We do however have workaround in place which allows us to hard-code the PHY id in the compatible property, thus skipping the ID scanning. Let's make the device-tree for sa8775p-ride slightly more correct by moving the reset-gpios property to the PHY node with its ID put into the PHY node's compatible. Link: https://lore.kernel.org/all/20200622093744.13685-1-brgl@bgdev.pl/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-5-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: enable the second SerDes PHYBartosz Golaszewski
Enable the second SerDes PHY on sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-4-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p: add a node for EMAC1Bartosz Golaszewski
Add a node for the second MAC on sa8775p platforms. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-3-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p: add a node for the second serdes PHYBartosz Golaszewski
Add a node for the SerDes PHY used by EMAC1 on sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-2-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-10arm64: dts: qcom: sdm845: Enable CAMSS on the bare rb3 boardBryan O'Donoghue
Enable CAMSS on the standard RB3 as it is possible to run the test pattern generator (TPG) without any populated ports/endpoints. media-ctl --reset yavta --no-query -w '0x009f0903 9' /dev/v4l-subdev4 yavta --list /dev/v4l-subdev4 media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SGRBG10_1X10/3280x2464]' media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SGRBG10_1X10/3280x2464]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' media-ctl -d /dev/media0 -p yavta -B capture-mplane --capture=5 -n 5 -I -f SGRBG10P -s 3280x2464 --file=TPG-SGRBG10-3280x2464-000-#.bin /dev/video2 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230809203534.1100030-2-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-10arm64: dts: qcom: sa8540p-ride: enable rtcEric Chanudet
SA8540P-ride is one of the Qualcomm platforms that does not have access to UEFI runtime services and on which the RTC registers are read-only, as described in: https://lore.kernel.org/all/20230202155448.6715-1-johan+linaro@kernel.org/ Reserve four bytes in one of the PMIC registers to hold the RTC offset the same way as it was done for sc8280xp-crd which has similar limitations: commit e67b45582c5e ("arm64: dts: qcom: sc8280xp-crd: enable rtc") On SA8540P-ride, the register bank SDAM6 of the first PMIC is not writable. Following recommendations provided during the review, use SDAM2 from the second PMIC at offset 0xa0 instead. Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Eric Chanudet <echanude@redhat.com> Link: https://lore.kernel.org/r/20230809203506.1833205-1-echanude@redhat.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-03arm64: dts: qcom: sdm670: add frequency profileRichard Acayan
Add the coefficients for the CPU frequencies to aid in frequency scaling. Profiling setup: - freqbench (https://github.com/kdrag0n/freqbench) - LineageOS kernel, android_kernel_google_msm-4.9 - recommended configuration options by freqbench - disabled options that require clang or 32-bit compilers - mmc governor switched from simple_ondemand to powersave Frequency domains: cpu1 cpu6 Offline CPUs: cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7 Sampling power every 1000 ms Baseline power usage: 445 mW ===== CPU 1 ===== Frequencies: 300 576 748 998 1209 1324 1516 1612 1708 300: 1114 3.7 C/MHz 43 mW 11.6 J 25.8 I/mJ 269.4 s 576: 2138 3.7 C/MHz 51 mW 7.1 J 42.2 I/mJ 140.3 s 748: 2780 3.7 C/MHz 67 mW 7.3 J 41.3 I/mJ 107.9 s 998: 3706 3.7 C/MHz 73 mW 5.9 J 51.1 I/mJ 80.9 s 1209: 4490 3.7 C/MHz 86 mW 5.7 J 52.2 I/mJ 66.8 s 1324: 4918 3.7 C/MHz 90 mW 5.5 J 54.6 I/mJ 61.0 s 1516: 5631 3.7 C/MHz 103 mW 5.5 J 54.9 I/mJ 53.3 s 1612: 5987 3.7 C/MHz 109 mW 5.5 J 55.0 I/mJ 50.1 s 1708: 6344 3.7 C/MHz 126 mW 5.9 J 50.5 I/mJ 47.3 s ===== CPU 6 ===== Frequencies: 300 652 825 979 1132 1363 1536 1747 1843 1996 300: 1868 6.2 C/MHz 53 mW 8.5 J 35.2 I/mJ 160.6 s 652: 4073 6.2 C/MHz 96 mW 7.1 J 42.4 I/mJ 73.7 s 825: 5132 6.2 C/MHz 117 mW 6.9 J 43.7 I/mJ 58.5 s 979: 6099 6.2 C/MHz 151 mW 7.4 J 40.4 I/mJ 49.2 s 1132: 7071 6.2 C/MHz 207 mW 8.8 J 34.1 I/mJ 42.4 s 1363: 8482 6.2 C/MHz 235 mW 8.3 J 36.1 I/mJ 35.4 s 1536: 9578 6.2 C/MHz 287 mW 9.0 J 33.3 I/mJ 31.3 s 1747: 10892 6.2 C/MHz 340 mW 9.4 J 32.0 I/mJ 27.6 s 1843: 11471 6.2 C/MHz 368 mW 9.6 J 31.1 I/mJ 26.2 s 1996: 12425 6.2 C/MHz 438 mW 10.6 J 28.3 I/mJ 24.2 s Signed-off-by: Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20230802011548.387519-10-mailingradian@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-03arm64: dts: qcom: sdm670: add cpu frequency scalingRichard Acayan
Add CPU frequency scaling, and also add the corresponding memory and cache bandwidths for each frequency. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20230802011548.387519-9-mailingradian@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-03arm64: dts: qcom: sdm670: add osm l3Richard Acayan
Add the interconnect node for L3 cache on SDM670. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230802011548.387519-8-mailingradian@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-03arm64: dts: qcom: Use labels with generic node names for ADC channelsMarijn Suijten
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. Follow up on the dt-bindings' `channel` node name requirement, and instead provide this (sometimes per-board) channel description through a label property. Also remove all the unused label references (not to be confused with label properties) from pm660, pmp8074 and pms405. [1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/ Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230730-generic-adc-channels-v5-2-e6c69bda8034@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-03arm64: dts: qcom: msm8953-daisy: use new speaker maxim,interleave-modeKrzysztof Kozlowski
MAX98927 speaker amplifier "interleave_mode" property was never documented. Corrected bindings expect "maxim,interleave-mode" instead, which is already supported by Linux driver. Change is not compatible with older Linux kernels. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230730202051.71099-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 21:33:15 +0000