summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-13dccp: fix memory leak during tear-down of unsuccessful connection requestHannes Frederic Sowa
This patch fixes a memory leak, which happens if the connection request is not fulfilled between parsing the DCCP options and handling the SYN (because e.g. the backlog is full), because we forgot to free the list of ack vectors. Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13tun: fix premature POLLOUT notification on tun devicesHannes Frederic Sowa
aszlig observed failing ssh tunnels (-w) during initialization since commit cc9da6cc4f56e0 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE"). We already had reports that the mentioned commit breaks Juniper VPN connections. I can't clearly say that the Juniper VPN client has the same problem, but it is worth a try to hint to this patch. Because of the early generation of link local addresses, the kernel now can start asking for routers on the local subnet much earlier than usual. Those router solicitation packets arrive inside the ssh channels and should be transmitted to the tun fd before the configuration scripts might have upped the interface and made it ready for transmission. ssh polls on the interface and receives back a POLL_OUT. It tries to send the earily router solicitation packet to the tun interface. Unfortunately it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh doesn't retry again and considers the tun interface broken forever. Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131 Fixes: cc9da6cc4f56 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE") Cc: Bjørn Mork <bjorn@mork.no> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reported-by: Jonas Lippuner <jonas@lippuner.ca> Cc: Jonas Lippuner <jonas@lippuner.ca> Reported-by: aszlig <aszlig@redmoonstudios.org> Cc: aszlig <aszlig@redmoonstudios.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13dccp/tcp: fix routing redirect raceJon Maxwell
As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320610d6 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13ucc/hdlc: fix two little issueZhao Qiang
1. modify bd_status from u32 to u16 in function hdlc_rx_done, because bd_status register is 16bits 2. write bd_length register before writing bd_status register Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13Merge tag 'powerpc-4.11-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull some more powerpc fixes from Michael Ellerman: "The main item is the addition of the Power9 Machine Check handler. This was delayed to make sure some details were correct, and is as minimal as possible. The rest is small fixes, two for the Power9 PMU, two dealing with obscure toolchain problems, two for the PowerNV IOMMU code (used by VFIO), and one to fix a crash on 32-bit machines with macio devices due to missing dma_ops. Thanks to: Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan, Nicholas Piggin" * tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: POWER9 machine check handler powerpc/64s: allow machine check handler to set severity and initiator powerpc/64s: fix handling of non-synchronous machine checks powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops powerpc/powernv/ioda2: Update iommu table base on ownership change powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x powerpc/perf: Handle sdar_mode for marked event in power9 powerpc/perf: Fix perf_get_data_addr() for power9 DD1 powerpc/boot: Fix zImage TOC alignment
2017-03-13vxlan: fix ovs supportNicolas Dichtel
The required changes in the function vxlan_dev_create() were missing in commit 8bcdc4f3a20b. The vxlan device is not registered anymore after this patch and the error path causes an stack dump: WARNING: CPU: 3 PID: 1498 at net/core/dev.c:6713 rollback_registered_many+0x9d/0x3f0 Fixes: 8bcdc4f3a20b ("vxlan: add changelink support") CC: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: use net->count to check whether a netns is alive or notAndrey Vagin
The previous idea was to check whether a net namespace is in net_exit_list or not. It doesn't work, because net->exit_list is used in __register_pernet_operations and __unregister_pernet_operations where all namespaces are added to a temporary list to make cleanup in a error case, so list_empty(&net->exit_list) always returns false. Reported-by: Mantas Mikulėnas <grawity@gmail.com> Fixes: 002d8a1a6c11 ("net: skip genenerating uevents for network namespaces that are exiting") Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13Merge tag 'platform-drivers-x86-v4.11-2' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Asus fixes for the airplane LED and a long awaited fujitsu cleanup. asus-wmi: - Remove quirk_no_rfkill - Detect quirk_no_rfkill from the DSDT fujitsu-laptop: - remove redundant MODULE_ALIAS entries - autodetect LCD interface on all models - simplify acpi_bus_register_driver() error handling - remove redundant forward declarations - replace numeric values with constants - rename FUNC_RFKILL to FUNC_FLAGS - make platform-related variables match naming convention - replace "hotkey" with "laptop" in symbol names - clearly denote backlight-related symbols" * tag 'platform-drivers-x86-v4.11-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: asus-wmi: Remove quirk_no_rfkill platform/x86: asus-wmi: Detect quirk_no_rfkill from the DSDT platform/x86: fujitsu-laptop: remove redundant MODULE_ALIAS entries platform/x86: fujitsu-laptop: autodetect LCD interface on all models platform/x86: fujitsu-laptop: simplify acpi_bus_register_driver() error handling platform/x86: fujitsu-laptop: remove redundant forward declarations platform/x86: fujitsu-laptop: replace numeric values with constants platform/x86: fujitsu-laptop: rename FUNC_RFKILL to FUNC_FLAGS platform/x86: fujitsu-laptop: make platform-related variables match naming convention platform/x86: fujitsu-laptop: replace "hotkey" with "laptop" in symbol names platform/x86: fujitsu-laptop: clearly denote backlight-related symbols
2017-03-13bridge: drop netfilter fake rtable unconditionallyFlorian Westphal
Andreas reports kernel oops during rmmod of the br_netfilter module. Hannes debugged the oops down to a NULL rt6info->rt6i_indev. Problem is that br_netfilter has the nasty concept of adding a fake rtable to skb->dst; this happens in a br_netfilter prerouting hook. A second hook (in bridge LOCAL_IN) is supposed to remove these again before the skb is handed up the stack. However, on module unload hooks get unregistered which means an skb could traverse the prerouting hook that attaches the fake_rtable, while the 'fake rtable remove' hook gets removed from the hooklist immediately after. Fixes: 34666d467cbf1e2e3c7 ("netfilter: bridge: move br_netfilter out of the core") Reported-by: Andreas Karis <akaris@redhat.com> Debugged-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13ipv6: avoid write to a possibly cloned skbFlorian Westphal
ip6_fragment, in case skb has a fraglist, checks if the skb is cloned. If it is, it will move to the 'slow path' and allocates new skbs for each fragment. However, right before entering the slowpath loop, it updates the nexthdr value of the last ipv6 extension header to NEXTHDR_FRAGMENT, to account for the fragment header that will be inserted in the new ipv6-fragment skbs. In case original skb is cloned this munges nexthdr value of another skb. Avoid this by doing the nexthdr update for each of the new fragment skbs separately. This was observed with tcpdump on a bridge device where netfilter ipv6 reassembly is active: tcpdump shows malformed fragment headers as the l4 header (icmpv6, tcp, etc). is decoded as a fragment header. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: Andreas Karis <akaris@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: wimax/i2400m: fix NULL-deref at probeJohan Hovold
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. The endpoints are specifically dereferenced in the i2400m_bootrom_init path during probe (e.g. in i2400mu_tx_bulk_out). Fixes: f398e4240fce ("i2400m/USB: probe/disconnect, dev init/shutdown and reset backends") Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13isdn/gigaset: fix NULL-deref at probeJohan Hovold
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: cf7776dc05b8 ("[PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connection") Cc: stable <stable@vger.kernel.org> # 2.6.17 Cc: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13ipv6: make ECMP route replacement less greedySabrina Dubroca
Commit 27596472473a ("ipv6: fix ECMP route replacement") introduced a loop that removes all siblings of an ECMP route that is being replaced. However, this loop doesn't stop when it has replaced siblings, and keeps removing other routes with a higher metric. We also end up triggering the WARN_ON after the loop, because after this nsiblings < 0. Instead, stop the loop when we have taken care of all routes with the same metric as the route being replaced. Reproducer: =========== #!/bin/sh ip netns add ns1 ip netns add ns2 ip -net ns1 link set lo up for x in 0 1 2 ; do ip link add veth$x netns ns2 type veth peer name eth$x netns ns1 ip -net ns1 link set eth$x up ip -net ns2 link set veth$x up done ip -net ns1 -6 r a 2000::/64 nexthop via fe80::0 dev eth0 \ nexthop via fe80::1 dev eth1 nexthop via fe80::2 dev eth2 ip -net ns1 -6 r a 2000::/64 via fe80::42 dev eth0 metric 256 ip -net ns1 -6 r a 2000::/64 via fe80::43 dev eth0 metric 2048 echo "before replace, 3 routes" ip -net ns1 -6 r | grep -v '^fe80\|^ff00' echo ip -net ns1 -6 r c 2000::/64 nexthop via fe80::4 dev eth0 \ nexthop via fe80::5 dev eth1 nexthop via fe80::6 dev eth2 echo "after replace, only 2 routes, metric 2048 is gone" ip -net ns1 -6 r | grep -v '^fe80\|^ff00' Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13perf: Add PERF_RECORD_NAMESPACES to include namespaces related infoHari Bathini
With the advert of container technologies like docker, that depend on namespaces for isolation, there is a need for tracing support for namespaces. This patch introduces new PERF_RECORD_NAMESPACES event for recording namespaces related info. By recording info for every namespace, it is left to userspace to take a call on the definition of a container and trace containers by updating perf tool accordingly. Each namespace has a combination of device and inode numbers. Though every namespace has the same device number currently, that may change in future to avoid the need for a namespace of namespaces. Considering such possibility, record both device and inode numbers separately for each namespace. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891929686.25309.2827618988917007768.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13mm, gup: fix typo in gup_p4d_range()Kirill A. Shutemov
gup_p4d_range() should call gup_pud_range(), not itself. [ This was not noticed on x86: this is the HAVE_GENERIC_RCU_GUP code used by arm[64] and powerpc - Linus ] Fixes: c2febafc6773 ("mm: convert generic code to 5-level paging") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reported-by: Anton Blanchard <anton@samba.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-13perf hists browser: Fix typo in function switch_data_fileChangbin Du
Should clear buf 'abs_path', not 'options'. Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 341487ab561f ("perf hists browser: Add option for runtime switching perf data file") Link: http://lkml.kernel.org/r/20170313114652.9207-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13perf report: Document +field style argument support for --field optionChangbin Du
Commit 2f3f9bcf000b ("perf tools: Add +field argument support for --field option") by Jiri Olsa <jolsa@kernel.org> introduced +field style argument support for --field option. This is useful but not updated documentation. This add a little description there. Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170313083252.23644-1-changbin.du@intel.com [ Slightly improved the phrase structure ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13perf sort: Fix segfault with basic block 'cycles' sort dimensionChangbin Du
Skip the sample which doesn't have branch_info to avoid segmentation fault: The fault can be reproduced by: perf record -a perf report -F cycles Signed-off-by: Changbin Du <changbin.du@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 0e332f033a82 ("perf tools: Add support for cycles, weight branch_info field") Link: http://lkml.kernel.org/r/20170313083148.23568-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13writeback: fix memory leak in wb_queue_work()Tahsin Erdogan
When WB_registered flag is not set, wb_queue_work() skips queuing the work, but does not perform the necessary clean up. In particular, if work->auto_free is true, it should free the memory. The leak condition can be reprouced by following these steps: mount /dev/sdb /mnt/sdb /* In qemu console: device_del sdb */ umount /dev/sdb Above will result in a wb_queue_work() call on an unregistered wb and thus leak memory. Reported-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Tahsin Erdogan <tahsin@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-13blk-mq: Fix tagset reinit in the presence of cpu hot-unplugSagi Grimberg
In case cpu was unplugged, we need to make sure not to assume that the tags for that cpu are still allocated. so check for null tags when reinitializing a tagset. Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-13perf tools: Ignore generated files pmu-events/{jevents,pmu-events.c} for gitChangbin Du
Ignore two files: pmu-events/{jevents,pmu-events.c} which are generated during the build. Committer notes: Testing it: $ make -C tools/perf/ $ git status On branch perf/core Untracked files: (use "git add <file>..." to include in what will be committed) tools/perf/pmu-events/jevents tools/perf/pmu-events/pmu-events.c nothing added to commit but untracked files present (use "git add" to track) $ After the patch: $ git status On branch perf/core nothing to commit, working tree clean $ Signed-off-by: Changbin Du <changbin.du@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170313083026.23487-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13perf tools: Missing c2c command in command-listChangbin Du
Add the c2c command to command-list.txt so perf help can list this command. Committer notes: Before: # perf help | grep c2c # After: # perf help | grep c2c c2c Shared Data C2C/HITM Analyzer. # Signed-off-by: Changbin Du <changbin.du@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170313082845.23373-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-12bpf: improve read-only handlingDaniel Borkmann
Improve bpf_{prog,jit_binary}_{un,}lock_ro() by throwing a one-time warning in case of an error when the image couldn't be set read-only, and also mark struct bpf_prog as locked when bpf_prog_lock_ro() was called. Reason for the latter is that bpf_prog_unlock_ro() is called from various places including error paths, and we shouldn't mess with page attributes when really not needed. For bpf_jit_binary_unlock_ro() this is not needed as jited flag implicitly indicates this, thus for archs with ARCH_HAS_SET_MEMORY we're guaranteed to have a previously locked image. Overall, this should also help us to identify any further potential issues with set_memory_*() helpers. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12selftests/bpf: fix broken buildAlexei Starovoitov
Recent merge of 'linux-kselftest-4.11-rc1' tree broke bpf test build. None of the tests were building and test_verifier.c had tons of compiler errors. Fix it and add #ifdef CAP_IS_SUPPORTED to support old versions of libcap. Tested on centos 6.8 and 7 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mpls: Do not decrement alive counter for unregister eventsDavid Ahern
Multipath routes can be rendered usesless when a device in one of the paths is deleted. For example: $ ip -f mpls ro ls 100 nexthop as to 200 via inet 172.16.2.2 dev virt12 nexthop as to 300 via inet 172.16.3.2 dev br0 101 nexthop as to 201 via inet6 2000:2::2 dev virt12 nexthop as to 301 via inet6 2000:3::2 dev br0 $ ip li del br0 When br0 is deleted the other hop is not considered in mpls_select_multipath because of the alive check -- rt_nhn_alive is 0. rt_nhn_alive is decremented once in mpls_ifdown when the device is taken down (NETDEV_DOWN) and again when it is deleted (NETDEV_UNREGISTER). For a 2 hop route, deleting one device drops the alive count to 0. Since devices are taken down before unregistering, the decrement on NETDEV_UNREGISTER is redundant. Fixes: c89359a42e2a4 ("mpls: support for dead routes") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12xen-netback: fix race condition on XenBus disconnectIgor Druzhinin
In some cases during XenBus disconnect event handling and subsequent queue resource release there may be some TX handlers active on other processors. Use RCU in order to synchronize with them. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mpls: Send route delete notifications when router module is unloadedDavid Ahern
When the mpls_router module is unloaded, mpls routes are deleted but notifications are not sent to userspace leaving userspace caches out of sync. Add the call to mpls_notify_route in mpls_net_exit as routes are freed. Fixes: 0189197f44160 ("mpls: Basic routing support") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12act_connmark: avoid crashing on malformed nlattrs with null parmsEtienne Noss
tcf_connmark_init does not check in its configuration if TCA_CONNMARK_PARMS is set, resulting in a null pointer dereference when trying to access it. [501099.043007] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [501099.043039] IP: [<ffffffffc10c60fb>] tcf_connmark_init+0x8b/0x180 [act_connmark] ... [501099.044334] Call Trace: [501099.044345] [<ffffffffa47270e8>] ? tcf_action_init_1+0x198/0x1b0 [501099.044363] [<ffffffffa47271b0>] ? tcf_action_init+0xb0/0x120 [501099.044380] [<ffffffffa47250a4>] ? tcf_exts_validate+0xc4/0x110 [501099.044398] [<ffffffffc0f5fa97>] ? u32_set_parms+0xa7/0x270 [cls_u32] [501099.044417] [<ffffffffc0f60bf0>] ? u32_change+0x680/0x87b [cls_u32] [501099.044436] [<ffffffffa4725d1d>] ? tc_ctl_tfilter+0x4dd/0x8a0 [501099.044454] [<ffffffffa44a23a1>] ? security_capable+0x41/0x60 [501099.044471] [<ffffffffa470ca01>] ? rtnetlink_rcv_msg+0xe1/0x220 [501099.044490] [<ffffffffa470c920>] ? rtnl_newlink+0x870/0x870 [501099.044507] [<ffffffffa472cc61>] ? netlink_rcv_skb+0xa1/0xc0 [501099.044524] [<ffffffffa47073f4>] ? rtnetlink_rcv+0x24/0x30 [501099.044541] [<ffffffffa472c634>] ? netlink_unicast+0x184/0x230 [501099.044558] [<ffffffffa472c9d8>] ? netlink_sendmsg+0x2f8/0x3b0 [501099.044576] [<ffffffffa46d8880>] ? sock_sendmsg+0x30/0x40 [501099.044592] [<ffffffffa46d8e03>] ? SYSC_sendto+0xd3/0x150 [501099.044608] [<ffffffffa425fda1>] ? __do_page_fault+0x2d1/0x510 [501099.044626] [<ffffffffa47fbd7b>] ? system_call_fast_compare_end+0xc/0x9b Fixes: 22a5dc0e5e3e ("net: sched: Introduce connmark action") Signed-off-by: Étienne Noss <etienne.noss@wifirst.fr> Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12Make IP 'forwarding' doc more preciseNeil Jerram
It wasn't clear if the 'forwarding' setting needs to be enabled on the interface that packets are received from, or on the interface that packets are forwarded to, or both. In fact (according to my code reading) the setting is relevant on the interface that packets are received from, so this change updates the doc to say that. Signed-off-by: Neil Jerram <neil@tigera.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12netvsc: handle select_queue when device is being removedstephen hemminger
Move the send indirection table from the inner device (netvsc) to the network device context. It is possible that netvsc_device is not present (remove in progress). This solves potential use after free issues when packet is being created during MTU change, shutdown, or queue count changes. Fixes: d8e18ee0fa96 ("netvsc: enhance transmit select_queue") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: ethernet: aquantia: call set_irq_affinity_hint before free_irqDavid Arcari
When a network interface controlled by the aquantia ethernet driver is brought down a warning is output in dmesg (see below). The problem is that aq_pci_func_free_irqs() is calling free_irq() before it is calling irq_set_affinity_hint(). WARNING: CPU: 4 PID: 10068 at kernel/irq/manage.c:1503 __free_irq+0x24d/0x2b0 <snip> Call Trace: dump_stack+0x63/0x87 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 __free_irq+0x24d/0x2b0 free_irq+0x39/0x90 aq_pci_func_free_irqs+0x52/0xa0 [atlantic] aq_nic_stop+0xca/0xd0 [atlantic] aq_ndev_close+0x1d/0x40 [atlantic] __dev_close_many+0x99/0x100 __dev_close+0x67/0xb0 <snip> Fixes: 36a4a50f4048 ("net: ethernet: aquantia: switch to pci_alloc_irq_vectors") Cc: Christoph Hellwig <hch@lst.de> Cc: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David Arcari <darcari@redhat.com> Tested-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12platform/x86: asus-wmi: Remove quirk_no_rfkillJoão Paulo Rechi Vita
With the detection introduced in the previous patches, we don't need these static DMI-based quirks anymore. This reverts the following commits: 56a37a72002b "asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UA" a961a285b479 "asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UF" 6b7ff2af5286 "asus-wmi: Add quirk_no_rfkill for the Asus Z550MA" 02db9ff7af18 "asus-wmi: Add quirk_no_rfkill for the Asus U303LB" 2d735244b798 "asus-wmi: Add quirk_no_rfkill for the Asus N552VW" a977e59c0c67 "asus-wmi: Create quirk for airplane_mode LED" Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [dvhart: minor commit message corrections] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-03-12Linux 4.11-rc2Linus Torvalds
2017-03-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - four patches to get the new cputime code in shape for s390 - add the new statx system call - a few bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up statx system call KVM: s390: Fix guest migration for huge guests resulting in panic s390/ipl: always use load normal for CCW-type re-IPL s390/timex: micro optimization for tod_to_ns s390/cputime: provide archicture specific cputime_to_nsecs s390/cputime: reset all accounting fields on fork s390/cputime: remove last traces of cputime_t s390: fix in-kernel program checks s390/crypt: fix missing unlock in ctr_paes_crypt on error path
2017-03-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - a fix for the kexec/purgatory regression which was introduced in the merge window via an innocent sparse fix. We could have reverted that commit, but on deeper inspection it turned out that the whole machinery is neither documented nor robust. So a proper cleanup was done instead - the fix for the TLB flush issue which was discovered recently - a simple typo fix for a reboot quirk * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tlb: Fix tlb flushing when lguest clears PGE kexec, x86/purgatory: Unbreak it and clean it up x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk
2017-03-12Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: - a workaround for a GIC erratum - a missing stub function for CONFIG_IRQDOMAIN=n - fixes for a couple of type inconsistencies * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Fix incorrect type of register size irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065 irqdomain: Add empty irq_domain_check_msi_remap irqchip/crossbar: Fix incorrect type of local variables
2017-03-12Merge remote-tracking branch 'mkp-scsi/4.11/scsi-fixes' into fixesJames Bottomley
2017-03-12x86/tlb: Fix tlb flushing when lguest clears PGEDaniel Borkmann
Fengguang reported random corruptions from various locations on x86-32 after commits d2852a224050 ("arch: add ARCH_HAS_SET_MEMORY config") and 9d876e79df6a ("bpf: fix unlocking of jited image when module ronx not set") that uses the former. While x86-32 doesn't have a JIT like x86_64, the bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module support built in and therefore never had the DEBUG_SET_MODULE_RONX setting enabled. After investigating the crashes further, it turned out that using set_memory_ro() and set_memory_rw() didn't have the desired effect, for example, setting the pages as read-only on x86-32 would still let probe_kernel_write() succeed without error. This behavior would manifest itself in situations where the vmalloc'ed buffer was accessed prior to set_memory_*() such as in case of bpf_prog_alloc(). In cases where it wasn't, the page attribute changes seemed to have taken effect, leading to the conclusion that a TLB invalidate didn't happen. Moreover, it turned out that this issue reproduced with qemu in "-cpu kvm64" mode, but not for "-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(), though. There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush (depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually worked fine, and further investigating the cr4 one turned out that X86_CR4_PGE bit was not set in cr4 register, meaning the __native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same value instead of clearing X86_CR4_PGE in the first write to trigger the flush. It turned out that X86_CR4_PGE was cleared from cr4 during init from lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also cleared from there due to concerns of using PGE in guest kernel that can lead to hard to trace bugs (see bff672e630a0 ("lguest: documentation V: Host") in init()). The CPU feature bits are cleared in dynamic boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB flushing to use, meaning they still used the old setting of the host kernel. Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate to static_cpu_has() checks is too late at this point as sections have been patched already, so for now, it seems reasonable to switch back to boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit c109bf95992b ("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via cr3 as originally intended, properly makes the new page attributes visible and thus fixes the crashes seen by Fengguang. Fixes: c109bf95992b ("x86/cpufeature: Remove cpu_has_pge") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: bp@suse.de Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: lkp@01.org Cc: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-11blk: Ensure users for current->bio_list can see the full list.NeilBrown
Commit 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()") changed current->bio_list so that it did not contain *all* of the queued bios, but only those submitted by the currently running make_request_fn. There are two places which walk the list and requeue selected bios, and others that check if the list is empty. These are no longer correct. So redefine current->bio_list to point to an array of two lists, which contain all queued bios, and adjust various code to test or walk both lists. Signed-off-by: NeilBrown <neilb@suse.com> Fixes: 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "ARM updates from Marc Zyngier: - vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 - I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices - General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems x86: - improvements in emulation of VMCLEAR, VMX MSR bitmaps, and VCPU reset * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: do not warn when MSR bitmap address is not backed KVM: arm64: Increase number of user memslots to 512 KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unused KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64 KVM: Add documentation for KVM_CAP_NR_MEMSLOTS KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled arm64: KVM: Survive unknown traps from guests arm: KVM: Survive unknown traps from guests KVM: arm/arm64: Let vcpu thread modify its own active state KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset kvm: nVMX: VMCLEAR should not cause the vCPU to shut down KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypass arm64: KVM: VHE: Clear HCR_TGE when invalidating guest TLBs
2017-03-11Merge tag 'extable-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull extable.h fix from Paul Gortmaker: "Fixup for arch/score after extable.h introduction. It seems that Guenter is the only one on the planet doing builds for arch/score -- we don't have compile coverage for it in linux-next or in the kbuild-bot either. Guenter couldn't even recall where he got his toolchain, but was kind enough to share it with me so I could validate this change and also add arch/score to my build coverage. I sat on this a bit in case there was any other fallout in other arch dirs, but since this still seems to be the only one, I might as well send it on its way" * tag 'extable-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: score: Fix implicit includes now failing build after extable change
2017-03-11Merge tag 'random_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random updates from Ted Ts'o: "Change get_random_{int,log} to use the CRNG used by /dev/urandom and getrandom(2). It's faster and arguably more secure than cut-down MD5 that we had been using. Also do some code cleanup" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: move random_min_urandom_seed into CONFIG_SYSCTL ifdef block random: convert get_random_int/long into get_random_u32/u64 random: use chacha20 for get_random_int/long random: fix comment for unused random_min_urandom_seed random: remove variable limit random: remove stale urandom_init_wait random: remove stale maybe_reseed_primary_crng
2017-03-11score: Fix implicit includes now failing build after extable changeGuenter Roeck
After changing from module.h to extable.h, score builds fail with: arch/score/kernel/traps.c: In function 'do_ri': arch/score/kernel/traps.c:248:4: error: implicit declaration of function 'user_disable_single_step' arch/score/mm/extable.c: In function 'fixup_exception': arch/score/mm/extable.c:32:38: error: dereferencing pointer to incomplete type arch/score/mm/extable.c:34:24: error: dereferencing pointer to incomplete type because extable.h doesn't drag in the same amount of headers as the module.h did. Add in the headers which were implicitly expected. Fixes: 90858794c960 ("module.h: remove extable.h include now users have migrated") Signed-off-by: Guenter Roeck <linux@roeck-us.net> [PG: tweak commit log; refresh for sched header refactoring.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2017-03-11Merge tag 'tty-4.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes frpm Greg KH: "Here are two bugfixes for tty stuff for 4.11-rc2. One of them resolves the pretty bad bug in the n_hdlc code that Alexander Popov found and fixed and has been reported everywhere. The other just fixes a samsung serial driver issue when DMA fails on some systems. Both have been in linux-next with no reported issues" * tag 'tty-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: samsung: Continue to work if DMA request fails tty: n_hdlc: get rid of racy n_hdlc.tbuf
2017-03-11Merge tag 'staging-4.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are two small build warning fixes for some staging drivers that Arnd has found on his valiant quest to get the kernel to build properly with no warnings. Both of these have been in linux-next this week and resolve the reported issues" * tag 'staging-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: octeon: remove unused variable staging/vc04_services: add CONFIG_OF dependency
2017-03-11Merge tag 'usb-4.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a number of different USB fixes for 4.11-rc2. Seems like there were a lot of unresolved issues that people have been finding for this subsystem, and a bunch of good security auditing happening as well from Johan Hovold. There's the usual batch of gadget driver fixes and xhci issues resolved as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers usb: host: xhci-dbg: HCIVERSION should be a binary number usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct usb: xhci-mtk: check hcc_params after adding primary hcd USB: serial: digi_acceleport: fix OOB-event processing MAINTAINERS: usb251xb: remove reference inexistent file doc: dt-bindings: usb251xb: mark reg as required usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time usb: usb251xb: remove max_{power,current}_{sp,bp} properties usb-storage: Add ignore-residue quirk for Initio INIC-3619 USB: iowarrior: fix NULL-deref in write USB: iowarrior: fix NULL-deref at probe usb: phy: isp1301: Add OF device ID table usb: ohci-at91: Do not drop unhandled USB suspend control requests USB: serial: safe_serial: fix information leak in completion handler USB: serial: io_ti: fix information leak in completion handler USB: serial: omninet: drop open callback USB: serial: omninet: fix reference leaks at open USB: serial: io_ti: fix NULL-deref in interrupt callback usb: dwc3: gadget: make to increment req->remaining in all cases ...
2017-03-11Merge tag 'pinctrl-v4.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Two smaller pin control fixes for the v4.11 series: - Add a get_direction() function to the qcom driver - Fix two pin names in the uniphier driver" * tag 'pinctrl-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: uniphier: change pin names of aio/xirq for LD11 pinctrl: qcom: add get_direction function
2017-03-10kexec, x86/purgatory: Unbreak it and clean it upThomas Gleixner
The purgatory code defines global variables which are referenced via a symbol lookup in the kexec code (core and arch). A recent commit addressing sparse warnings made these static and thereby broke kexec_file. Why did this happen? Simply because the whole machinery is undocumented and lacks any form of forward declarations. The variable names are unspecific and lack a prefix, so adding forward declarations creates shadow variables in the core code. Aside of that the code relies on magic constants and duplicate struct definitions with no way to ensure that these things stay in sync. The section placement of the purgatory variables happened by chance and not by design. Unbreak kexec and cleanup the mess: - Add proper forward declarations and document the usage - Use common struct definition - Use the proper common defines instead of magic constants - Add a purgatory_ prefix to have a proper name space - Use ARRAY_SIZE() instead of a homebrewn reimplementation - Add proper sections to the purgatory variables [ From Mike ] Fixes: 72042a8c7b01 ("x86/purgatory: Make functions and variables static") Reported-by: Mike Galbraith <<efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Tobin C. Harding" <me@tobin.cc> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-10Merge tag 'ceph-for-4.11-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: - a fix for the recently discovered misdirected requests bug present in jewel and later on the server side and all stable kernels - a fixup for -rc1 CRUSH changes - two usability enhancements: osd_request_timeout option and supported_features bus attribute. * tag 'ceph-for-4.11-rc2' of git://github.com/ceph/ceph-client: libceph: osd_request_timeout option rbd: supported_features bus attribute libceph: don't set weight to IN when OSD is destroyed libceph: fix crush_decode() for older maps
2017-03-10Merge branch 'mlx5-fixes'David S. Miller
Saeed Mahameed says: ==================== Mellanox mlx5 fixes 2017-03-09 This series contains some mlx5 core and ethernet driver fixes. For -stable: net/mlx5e: remove IEEE/CEE mode check when setting DCBX mode (for kernel >= 4.10) net/mlx5e: Avoid wrong identification of rules on deletion (for kernel >= 4.9) net/mlx5: Don't save PCI state when PCI error is detected (for kernel >= 4.9) net/mlx5: Fix create autogroup prev initializer (for kernel >=4.9) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-15 16:29:05 +0000