summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-20powerpc: ima: send the kexec buffer to the next kernelThiago Jung Bauermann
The IMA kexec buffer allows the currently running kernel to pass the measurement list via a kexec segment to the kernel that will be kexec'd. This is the architecture-specific part of setting up the IMA kexec buffer for the next kernel. It will be used in the next patch. Link: http://lkml.kernel.org/r/1480554346-29071-6-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-20ima: maintain memory size needed for serializing the measurement listMimi Zohar
In preparation for serializing the binary_runtime_measurements, this patch maintains the amount of memory required. Link: http://lkml.kernel.org/r/1480554346-29071-5-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-20ima: permit duplicate measurement list entriesMimi Zohar
Measurements carried across kexec need to be added to the IMA measurement list, but should not prevent measurements of the newly booted kernel from being added to the measurement list. This patch adds support for allowing duplicate measurements. The "boot_aggregate" measurement entry is the delimiter between soft boots. Link: http://lkml.kernel.org/r/1480554346-29071-4-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-20ima: on soft reboot, restore the measurement listMimi Zohar
The TPM PCRs are only reset on a hard reboot. In order to validate a TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement list of the running kernel must be saved and restored on boot. This patch restores the measurement list. Link: http://lkml.kernel.org/r/1480554346-29071-3-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-20powerpc: ima: get the kexec buffer passed by the previous kernelThiago Jung Bauermann
Patch series "ima: carry the measurement list across kexec", v8. The TPM PCRs are only reset on a hard reboot. In order to validate a TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement list of the running kernel must be saved and then restored on the subsequent boot, possibly of a different architecture. The existing securityfs binary_runtime_measurements file conveniently provides a serialized format of the IMA measurement list. This patch set serializes the measurement list in this format and restores it. Up to now, the binary_runtime_measurements was defined as architecture native format. The assumption being that userspace could and would handle any architecture conversions. With the ability of carrying the measurement list across kexec, possibly from one architecture to a different one, the per boot architecture information is lost and with it the ability of recalculating the template digest hash. To resolve this problem, without breaking the existing ABI, this patch set introduces the boot command line option "ima_canonical_fmt", which is arbitrarily defined as little endian. The need for this boot command line option will be limited to the existing version 1 format of the binary_runtime_measurements. Subsequent formats will be defined as canonical format (eg. TPM 2.0 support for larger digests). A simplified method of Thiago Bauermann's "kexec buffer handover" patch series for carrying the IMA measurement list across kexec is included in this patch set. The simplified method requires all file measurements be taken prior to executing the kexec load, as subsequent measurements will not be carried across the kexec and restored. This patch (of 10): The IMA kexec buffer allows the currently running kernel to pass the measurement list via a kexec segment to the kernel that will be kexec'd. The second kernel can check whether the previous kernel sent the buffer and retrieve it. This is the architecture-specific part which enables IMA to receive the measurement list passed by the previous kernel. It will be used in the next patch. The change in machine_kexec_64.c is to factor out the logic of removing an FDT memory reservation so that it can be used by remove_ima_buffer. Link: http://lkml.kernel.org/r/1480554346-29071-2-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-20ipv4: Should use consistent conditional judgement for ip fragment in ↵zheng li
__ip_append_data and ip_finish_output There is an inconsistent conditional judgement in __ip_append_data and ip_finish_output functions, the variable length in __ip_append_data just include the length of application's payload and udp header, don't include the length of ip header, but in ip_finish_output use (skb->len > ip_skb_dst_mtu(skb)) as judgement, and skb->len include the length of ip header. That causes some particular application's udp payload whose length is between (MTU - IP Header) and MTU were fragmented by ip_fragment even though the rst->dev support UFO feature. Add the length of ip header to length in __ip_append_data to keep consistent conditional judgement as ip_finish_output for ip fragment. Signed-off-by: Zheng Li <james.z.li@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20ath10k: free host-mem with DMA_BIRECTIONAL flagBen Greear
Hopefully this fixes the problem reported by Kalle: Noticed this in my log, but I don't have time to investigate this in detail right now: [ 413.795346] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 414.158755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 477.439659] ath10k_pci 0000:02:00.0: could not get mac80211 beacon [ 481.666630] ------------[ cut here ]------------ [ 481.666669] WARNING: CPU: 0 PID: 1978 at lib/dma-debug.c:1155 check_unmap+0x320/0x8e0 [ 481.666688] ath10k_pci 0000:02:00.0: DMA-API: device driver frees DMA memory with different direction [device address=0x000000002d130000] [size=63800 bytes] [mapped with DMA_BIDIRECTIONAL] [unmapped with DMA_TO_DEVICE] [ 481.666703] Modules linked in: ctr ccm ath10k_pci(E-) ath10k_core(E) ath(E) mac80211(E) cfg80211(E) snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event snd_seq btusb btintel snd_seq_device joydev coret [ 481.671468] CPU: 0 PID: 1978 Comm: rmmod Tainted: G E 4.9.0-rc7-wt+ #54 [ 481.671478] Hardware name: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010 [ 481.671489] ef49dcec c842ee92 c8b5830e ef49dd34 ef49dd20 c80850f5 c8b5a13c ef49dd50 [ 481.671560] 000007ba c8b5830e 00000483 c8461830 c8461830 00000483 ef49ddcc f34e64b8 [ 481.671641] c8b58360 ef49dd3c c80851bb 00000009 00000000 ef49dd34 c8b5a13c ef49dd50 [ 481.671716] Call Trace: [ 481.671731] [<c842ee92>] dump_stack+0x76/0xb4 [ 481.671745] [<c80850f5>] __warn+0xe5/0x100 [ 481.671757] [<c8461830>] ? check_unmap+0x320/0x8e0 [ 481.671769] [<c8461830>] ? check_unmap+0x320/0x8e0 [ 481.671780] [<c80851bb>] warn_slowpath_fmt+0x3b/0x40 [ 481.671791] [<c8461830>] check_unmap+0x320/0x8e0 [ 481.671804] [<c8462054>] debug_dma_unmap_page+0x84/0xa0 [ 481.671835] [<f937cd7a>] ath10k_wmi_free_host_mem+0x9a/0xe0 [ath10k_core] [ 481.671861] [<f9363400>] ath10k_core_destroy+0x50/0x60 [ath10k_core] [ 481.671875] [<f8e13969>] ath10k_pci_remove+0x79/0xa0 [ath10k_pci] [ 481.671889] [<c848d8d8>] pci_device_remove+0x38/0xb0 [ 481.671901] [<c859fe4b>] __device_release_driver+0x7b/0x110 [ 481.671913] [<c85a00e7>] driver_detach+0x97/0xa0 [ 481.671923] [<c859ef8b>] bus_remove_driver+0x4b/0xb0 [ 481.671934] [<c85a0cda>] driver_unregister+0x2a/0x60 [ 481.671949] [<c848c888>] pci_unregister_driver+0x18/0x70 [ 481.671965] [<f8e14dae>] ath10k_pci_exit+0xd/0x25f [ath10k_pci] [ 481.671979] [<c812bb84>] SyS_delete_module+0xf4/0x180 [ 481.671995] [<c81f801b>] ? __might_fault+0x8b/0xa0 [ 481.672009] [<c80037d0>] do_fast_syscall_32+0xa0/0x1e0 [ 481.672025] [<c88d4c88>] sysenter_past_esp+0x45/0x74 [ 481.672037] ---[ end trace 3fd23759e17e1622 ]--- [ 481.672049] Mapped at: [ 481.672060] [ 481.672072] [<c846062c>] debug_dma_map_page.part.25+0x1c/0xf0 [ 481.672083] [ 481.672095] [<c8460799>] debug_dma_map_page+0x99/0xc0 [ 481.672106] [ 481.672132] [<f93745ec>] ath10k_wmi_alloc_chunk+0x12c/0x1f0 [ath10k_core] [ 481.672142] [ 481.672168] [<f937d0c4>] ath10k_wmi_event_service_ready_work+0x304/0x540 [ath10k_core] [ 481.672178] [ 481.672190] [<c80a3643>] process_one_work+0x1c3/0x670 [ 482.137134] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 482.313144] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2 [ 482.313274] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2 [ 482.313768] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 482.313777] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 1 [ 482.313974] ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.59-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4159f498 [ 482.369858] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2 [ 482.370011] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 483.596770] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 [ 483.701686] ath: EEPROM regdomain: 0x0 [ 483.701706] ath: EEPROM indicates default country code should be used [ 483.701713] ath: doing EEPROM country->regdmn map search [ 483.701721] ath: country maps to regdmn code: 0x3a [ 483.701730] ath: Country alpha2 being used: US [ 483.701737] ath: Regpair used: 0x3a Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-20samples/bpf: Move open_raw_sock to separate headerJoe Stringer
This function was declared in libbpf.c and was the only remaining function in this library, but has nothing to do with BPF. Shift it out into a new header, sock_example.h, and include it from the relevant samples. Signed-off-by: Joe Stringer <joe@ovn.org> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20161209024620.31660-8-joe@ovn.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20samples/bpf: Remove perf_event_open() declarationJoe Stringer
This declaration was made in samples/bpf/libbpf.c for convenience, but there's already one in tools/perf/perf-sys.h. Reuse that one. Committer notes: Testing it: $ make -j4 O=../build/v4.9.0-rc8+ samples/bpf/ make[1]: Entering directory '/home/build/v4.9.0-rc8+' CHK include/config/kernel.release GEN ./Makefile CHK include/generated/uapi/linux/version.h Using /home/acme/git/linux as source for kernel CHK include/generated/utsrelease.h CHK include/generated/timeconst.h CHK include/generated/bounds.h CHK include/generated/asm-offsets.h CALL /home/acme/git/linux/scripts/checksyscalls.sh HOSTCC samples/bpf/test_verifier.o HOSTCC samples/bpf/libbpf.o HOSTCC samples/bpf/../../tools/lib/bpf/bpf.o HOSTCC samples/bpf/test_maps.o HOSTCC samples/bpf/sock_example.o HOSTCC samples/bpf/bpf_load.o <SNIP> HOSTLD samples/bpf/trace_event HOSTLD samples/bpf/sampleip HOSTLD samples/bpf/tc_l2_redirect make[1]: Leaving directory '/home/build/v4.9.0-rc8+' $ Also tested the offwaketime resulting from the rebuild, seems to work as before. Signed-off-by: Joe Stringer <joe@ovn.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20161209024620.31660-7-joe@ovn.org [ Use -I$(srctree)/tools/lib/ to support out of source code tree builds ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20samples/bpf: Be consistent with bpf_load_program bpf_insn parameterArnaldo Carvalho de Melo
Only one of the examples declare the bpf_insn bpf proggie as a const: $ grep 'struct bpf_insn [a-z]' samples/bpf/*.c samples/bpf/fds_example.c: static const struct bpf_insn insns[] = { samples/bpf/sock_example.c: struct bpf_insn prog[] = { samples/bpf/test_cgrp2_attach2.c: struct bpf_insn prog[] = { samples/bpf/test_cgrp2_attach.c: struct bpf_insn prog[] = { samples/bpf/test_cgrp2_sock.c: struct bpf_insn prog[] = { $ Which causes this warning: [root@f5065a7d6272 linux]# make -j4 O=/tmp/build/linux samples/bpf/ <SNIP> HOSTCC samples/bpf/fds_example.o /git/linux/samples/bpf/fds_example.c: In function 'bpf_prog_create': /git/linux/samples/bpf/fds_example.c:63:6: warning: passing argument 2 of 'bpf_load_program' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] insns, insns_cnt, "GPL", 0, ^~~~~ In file included from /git/linux/samples/bpf/libbpf.h:5:0, from /git/linux/samples/bpf/bpf_load.h:4, from /git/linux/samples/bpf/fds_example.c:15: /git/linux/tools/lib/bpf/bpf.h:31:5: note: expected 'struct bpf_insn *' but argument is of type 'const struct bpf_insn *' int bpf_load_program(enum bpf_prog_type type, struct bpf_insn *insns, ^~~~~~~~~~~~~~~~ HOSTCC samples/bpf/sockex1_user.o So just ditch that 'const' to reduce build noise, leaving changing the bpf_load_program() bpf_insn parameter to const to a later patch, if deemed adequate. Cc: Joe Stringer <joe@ovn.org> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1z5xee8n3oa66jf62bpv16ed@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20tools lib bpf: Add bpf_prog_{attach,detach}Joe Stringer
Commit d8c5b17f2bc0 ("samples: bpf: add userspace example for attaching eBPF programs to cgroups") added these functions to samples/libbpf, but during this merge all of the samples libbpf functionality is shifting to tools/lib/bpf. Shift these functions there. Committer notes: Use bzero + attr.FIELD = value instead of 'attr = { .FIELD = value, just like the other wrapper calls to sys_bpf with bpf_attr to make this build in older toolchais, such as the ones in CentOS 5 and 6. Signed-off-by: Joe Stringer <joe@ovn.org> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-au2zvtsh55vqeo3v3uw7jr4c@git.kernel.org Link: https://github.com/joestringer/linux/commit/353e6f298c3d0a92fa8bfa61ff898c5050261a12.patch Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20samples/bpf: Switch over to libbpfJoe Stringer
Now that libbpf under tools/lib/bpf/* is synced with the version from samples/bpf, we can get rid most of the libbpf library here. Committer notes: Built it in a docker fedora rawhide container and ran it in the f25 host, seems to work just like it did before this patch, i.e. the switch to tools/lib/bpf/ doesn't seem to have introduced problems and Joe said he tested it with all the entries in samples/bpf/ and other code he found: [root@f5065a7d6272 linux]# make -j4 O=/tmp/build/linux headers_install <SNIP> [root@f5065a7d6272 linux]# rm -rf /tmp/build/linux/samples/bpf/ [root@f5065a7d6272 linux]# make -j4 O=/tmp/build/linux samples/bpf/ make[1]: Entering directory '/tmp/build/linux' CHK include/config/kernel.release HOSTCC scripts/basic/fixdep GEN ./Makefile CHK include/generated/uapi/linux/version.h Using /git/linux as source for kernel CHK include/generated/utsrelease.h HOSTCC scripts/basic/bin2c HOSTCC arch/x86/tools/relocs_32.o HOSTCC arch/x86/tools/relocs_64.o LD samples/bpf/built-in.o <SNIP> HOSTCC samples/bpf/fds_example.o HOSTCC samples/bpf/sockex1_user.o /git/linux/samples/bpf/fds_example.c: In function 'bpf_prog_create': /git/linux/samples/bpf/fds_example.c:63:6: warning: passing argument 2 of 'bpf_load_program' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] insns, insns_cnt, "GPL", 0, ^~~~~ In file included from /git/linux/samples/bpf/libbpf.h:5:0, from /git/linux/samples/bpf/bpf_load.h:4, from /git/linux/samples/bpf/fds_example.c:15: /git/linux/tools/lib/bpf/bpf.h:31:5: note: expected 'struct bpf_insn *' but argument is of type 'const struct bpf_insn *' int bpf_load_program(enum bpf_prog_type type, struct bpf_insn *insns, ^~~~~~~~~~~~~~~~ HOSTCC samples/bpf/sockex2_user.o <SNIP> HOSTCC samples/bpf/xdp_tx_iptunnel_user.o clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.2.1/include -I/git/linux/arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I/git/linux/include -I./include -I/git/linux/arch/x86/include/uapi -I/git/linux/include/uapi -I./include/generated/uapi -include /git/linux/include/linux/kconfig.h \ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \ -Wno-compare-distinct-pointer-types \ -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -O2 -emit-llvm -c /git/linux/samples/bpf/sockex1_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/sockex1_kern.o HOSTLD samples/bpf/tc_l2_redirect <SNIP> HOSTLD samples/bpf/lwt_len_hist HOSTLD samples/bpf/xdp_tx_iptunnel make[1]: Leaving directory '/tmp/build/linux' [root@f5065a7d6272 linux]# And then, in the host: [root@jouet bpf]# mount | grep "docker.*devicemapper\/" /dev/mapper/docker-253:0-1705076-9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9 on /var/lib/docker/devicemapper/mnt/9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9 type xfs (rw,relatime,context="system_u:object_r:container_file_t:s0:c73,c276",nouuid,attr2,inode64,sunit=1024,swidth=1024,noquota) [root@jouet bpf]# cd /var/lib/docker/devicemapper/mnt/9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9/rootfs/tmp/build/linux/samples/bpf/ [root@jouet bpf]# file offwaketime offwaketime: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=f423d171e0487b2f802b6a792657f0f3c8f6d155, not stripped [root@jouet bpf]# readelf -SW offwaketime offwaketime offwaketime_kern.o offwaketime_user.o [root@jouet bpf]# readelf -SW offwaketime_kern.o There are 11 section headers, starting at offset 0x700: Section Headers: [Nr] Name Type Address Off Size ES Flg Lk Inf Al [ 0] NULL 0000000000000000 000000 000000 00 0 0 0 [ 1] .strtab STRTAB 0000000000000000 000658 0000a8 00 0 0 1 [ 2] .text PROGBITS 0000000000000000 000040 000000 00 AX 0 0 4 [ 3] kprobe/try_to_wake_up PROGBITS 0000000000000000 000040 0000d8 00 AX 0 0 8 [ 4] .relkprobe/try_to_wake_up REL 0000000000000000 0005a8 000020 10 10 3 8 [ 5] tracepoint/sched/sched_switch PROGBITS 0000000000000000 000118 000318 00 AX 0 0 8 [ 6] .reltracepoint/sched/sched_switch REL 0000000000000000 0005c8 000090 10 10 5 8 [ 7] maps PROGBITS 0000000000000000 000430 000050 00 WA 0 0 4 [ 8] license PROGBITS 0000000000000000 000480 000004 00 WA 0 0 1 [ 9] version PROGBITS 0000000000000000 000484 000004 00 WA 0 0 4 [10] .symtab SYMTAB 0000000000000000 000488 000120 18 1 4 8 Key to Flags: W (write), A (alloc), X (execute), M (merge), S (strings) I (info), L (link order), G (group), T (TLS), E (exclude), x (unknown) O (extra OS processing required) o (OS specific), p (processor specific) [root@jouet bpf]# ./offwaketime | head -3 qemu-system-x86;entry_SYSCALL_64_fastpath;sys_ppoll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;hrtimer_wakeup;__hrtimer_run_queues;hrtimer_interrupt;local_apic_timer_interrupt;smp_apic_timer_interrupt;__irqentry_text_start;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel;start_cpu;;swapper/0 4 firefox;entry_SYSCALL_64_fastpath;sys_poll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;pollwake;__wake_up_common;__wake_up_sync_key;pipe_write;__vfs_write;vfs_write;sys_write;entry_SYSCALL_64_fastpath;;Timer 1 swapper/2;start_cpu;start_secondary;cpu_startup_entry;schedule_preempt_disabled;schedule;__schedule;-;---;; 61 [root@jouet bpf]# Signed-off-by: Joe Stringer <joe@ovn.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Wang Nan <wangnan0@huawei.com> Cc: netdev@vger.kernel.org Link: https://github.com/joestringer/linux/commit/5c40f54a52b1f437123c81e21873f4b4b1f9bd55.patch Link: http://lkml.kernel.org/n/tip-xr8twtx7sjh5821g8qw47yxk@git.kernel.org [ Use -I$(srctree)/tools/lib/ to support out of source code tree builds, as noticed by Wang Nan ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf diff: Do not overwrite valid build idKan Liang
Fixes a perf diff regression issue which was introduced by commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") The binary name could be same when perf diff different binaries. Build id is used to distinguish between them. However, the previous patch assumes the same binary name has same build id. So it overwrites the build id according to the binary name, regardless of whether the build id is set or not. Check the has_build_id in dso__load. If the build id is already set, use it. Before the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% -99.80% tchain_edit [.] f2 0.12% +99.81% tchain_edit [.] f3 0.02% -0.01% [ixgbe] [k] ixgbe_read_reg After the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% +0.10% tchain_edit [.] f3 0.12% -0.08% tchain_edit [.] f2 Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> CC: Dima Kogan <dima@secretsauce.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf annotate: Don't throw error for zero length symbolsRavi Bangoria
'perf report --tui' exits with error when it finds a sample of zero length symbol (i.e. addr == sym->start == sym->end). Actually these are valid samples. Don't exit TUI and show report with such symbols. Reported-and-Tested-by: Anton Blanchard <anton@samba.org> Link: https://lkml.org/lkml/2016/10/8/189 Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Riyder <chris.ryder@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@kernel.org # v4.9+ Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20drm/i915: skip the first 4k of stolen memory on everything >= gen8Paulo Zanoni
BSpec got updated and this workaround is now listed as standard required programming for all subsequent projects. This is confirmed to fix Skylake screen flickering issues (probably caused by the fact that we initialized a ring in the first page of stolen, but I didn't 100% confirm this theory). v2: this is the patch that fixes the screen flickering, document it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Cc: stable@vger.kernel.org Tested-by: Dominik Klementowski <dominik232@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481727338-9901-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit d43537610470d8829ebd17cd7842f47176e35ebd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: Fallback to single PAGE_SIZE segments for DMA remappingChris Wilson
If we at first do not succeed with attempting to remap our physical pages using a coalesced scattergather list, try again with one scattergather entry per page. This should help with swiotlb as it uses a limited buffer size and only searches for contiguous chunks within its buffer aligned up to the next boundary - i.e. we may prematurely cause a failure as we are unable to utilize the unused space between large chunks and trigger an error such as: i915 0000:00:02.0: swiotlb buffer is full (sz: 1630208 bytes) Reported-by: Juergen Gross <jgross@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Fixes: 871dfbd67d4e ("drm/i915: Allow compaction upto SWIOTLB max segment size") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161219124346.550-1-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit d766ef53006c2c38a7fe2bef0904105a793383f2) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: Fix use after free in logical_render_ring_initTvrtko Ursulin
Commit 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines") introduced the dynanically allocated engine instances and created an potential use after free scenario in logical_render_ring_init where lrc_destroy_wa_ctx_obj could be called after the engine instance has been freed. This can only happen during engine setup/init error handling which luckily does not happen ever in practice. Fix is to not call lrc_destroy_wa_ctx_obj since it would have already been executed from the preceding engine cleanup. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1481894322-2145-1-git-send-email-tvrtko.ursulin@linux.intel.com (cherry picked from commit d038fc7e4fff14d6b026130007faef35cbf5e956) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: disable PSR by default on HSW/BDWPaulo Zanoni
We've been ignoring the poor bugzilla reporters that say PSR causes system lockups and all other sorts of problems. The earliest bug report is from April, so I think we can use the "revert the offending commit if no fixes are presented within 8 months" rule here. Fixes: 9b58e352b463 ("drm/i915: Enable PSR by default on Haswell and Broadwell.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97602 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97515 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96736 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96704 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96569 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94985 Cc: <stable@vger.kernel.org> # v4.6+ Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481662664-18986-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 2ee7dc497e348eecbb82adbb1ea9e9a7e29fe921) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: Fix setting of boost freq tunableMika Kuoppala
For limiting the max frequency of gpu, the max freq tunable is not enough to hard limit the max gap. We now have also per client boost max freq. When this tunable was introduced, it was mistakenly made read only. Allow user to gain control by setting it writable. Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Cc: <stable@vger.kernel.org> # v4.9+ Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481718380-9170-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 73a798711314b54cbd4fe224e24db92c306a8d8c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: tune down the fast link training vs boot failDaniel Vetter
It's been unfixed since a while and no one is immediately working on this. And we have the FIXME already. And now also a task in the DP team's backlog. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://lists.freedesktop.org/archives/intel-gfx/2016-July/101951.html Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Adjust comment per Ville's feedback.] Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213195414.28923-1-daniel.vetter@ffwll.ch (cherry picked from commit 2dd85aeb5bc99e3763dd192cdb95ff405a102c8a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: Reorder phys backing storage releaseChris Wilson
In commit a4f5ea64f0a8 ("drm/i915: Refactor object page API"), I reordered the object->pages teardown to be more friendly wrt to a separate obj->mm.lock. However, I overlooked the phys object and left it with a dangling use-after-free of its phys_handle. Move the allocation of the phys handle to get_pages and it release to put_pages to prevent the invalid access and to improve symmetry. v2: Add commentary about always aligning to page size. Testcase: igt/drv_selftest/objects Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: a4f5ea64f0a8 ("drm/i915: Refactor object page API") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161207133411.8028-1-chris@chris-wilson.co.uk (cherry picked from commit dbb4351bab0a8440f6b02895c142bce6c30b7097) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/gen9: Fix PCODE polling during SAGV disablingImre Deak
According to the previous patch, it's possible atm that we call intel_do_sagv_disable() only once during the 1ms period and time out if that call fails. As opposed to this the spec says that we need to keep retrying this request for a 1ms duration, so let's do this similarly to the CDCLK change notification request. v4-5: - Rebased on the reply_mask, reply change. v6: - Remove w/s change. (Lyude) - Rebased on the timeout_base argument change. Cc: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 656d1b89e5ff ("drm/i915/skl: Add support for the SAGV, fix underrun hangs") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com (cherry picked from commit b3b8e99984a4eace91bc097e8f8cec71441cae16) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/gen9: Fix PCODE polling during CDCLK change notificationImre Deak
commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com (cherry picked from commit a0b8a1fe34430c3a82258e8cb45f5968bdf31afd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is settingHans de Goede
Set the CHV_GPIO_GPIOEN bit when updating GPIOs from chv_exec_gpio. Fixes: a0a6d4ffd2ad ("drm/i915/dsi: add support for gpio elements on CHV") Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161201202925.12220-3-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit b2b45fcd921e864a5e9bbc7aa55dee96d5e11c06) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESETHans de Goede
Looking at the ADF code from the Android kernel sources for a cherrytrail tablet I noticed that it is calling the MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook. Until commit b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences in panel prepare/unprepare hooks") the mainline i915 code was doing the same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET / MIPI_SEQ_DEASSERT_RESET. Looking at the naming of the sequences that is the right thing to do, but the problem is, that the old mainline code and the ADF code was actually calling the right sequence (tested on a cube iwork8 air tablet), and the swapping of the calling breaks things. This breakage was likely not noticed in testing because on cherrytrail, currently chv_exec_gpio ends up disabling the gpio pins rather then setting them (this is fixed in the next patch in this patch-set). This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's places in the enum defining them, so that their (new) names match their actual use. Changes in v2: -Add a comment to the enum explaining that the assert/reassert names are swapped in the spec Fixes: b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences...") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202150128.29871-1-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 2b8208ac93be2783edc627fc02d9ca50cc479923) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from ↵Hans de Goede
vlv_init_display_clock_gating On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading i915 at boot 1 out of every 3 boots, resulting in a non functional LCD. Once the i915 driver has successfully loaded, the panel can be disabled / enabled without hitting this issue. The getting stuck is caused by vlv_init_display_clock_gating() clearing the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled driving the DSI LCD by the BIOS. Clearing this bit while DSI is in use is a known issue and intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it as appropriate. This commit modifies vlv_init_display_clock_gating() to leave the DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck. Changes in v2: -Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 721d484563e1a51ada760089c490cbc47e909756) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: drop the struct_mutex when wedged or trying to resetMatthew Auld
We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged or a reset is in progress we bail early but never seem to actually release the lock. Fixes: 7f1847ebf48b ("drm/i915: Simplify checking of GPU reset_counter in display pageflips") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.com Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.7+ (cherry picked from commit ddbb271aea87fc6004d3c8bcdb0710e980c7ec85) Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit e411072d5740a49cdc9d0713798c30440757e451) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20brcmfmac: fix uninitialized field in scheduled scan ssid configurationArend Van Spriel
The scheduled scan ssid configuration in firmware has a flags field that was not initialized resulting in unexpected behaviour. Fixes: e3bdb7cc0300 ("brcmfmac: fix handling ssids in .sched_scan_start() callback") Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-20brcmfmac: fix memory leak in brcmf_cfg80211_attach()Arend Van Spriel
In brcmf_cfg80211_attach() there was one error path not properly handled as it leaked memory allocated in brcmf_btcoex_attach(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-20perf bench futex: Fix lock-pi help stringDavidlohr Bueso
Obvious copy/paste typo from the requeue program. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Link: http://lkml.kernel.org/r/1481830584-30909-1-git-send-email-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf trace: Check if MAP_32BIT is defined (again)Jiri Olsa
There might be systems where MAP_32BIT is not defined, like some some RHEL7 powerpc versions. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Kyle McMartin <kyle@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 256763b01741 ("perf trace beauty mmap: Add more conditional defines") Link: http://lkml.kernel.org/r/1481831814-23683-1-git-send-email-jolsa@kernel.org [ Changed the Fixme cset to the one removing the conditional switch case for MAP_32BIT ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20samples/bpf: Make perf_event_read() staticArnaldo Carvalho de Melo
While testing Joe's conversion of samples/bpf/ to use tools/lib/bpf/ I noticed some warnings building samples/bpf/ on a Fedora Rawhide container, with clang/llvm 3.9 I noticed this: [root@1e797fdfbf4f linux]# make -j4 O=/tmp/build/linux/ samples/bpf/ make[1]: Entering directory '/tmp/build/linux' CHK include/config/kernel.release GEN ./Makefile CHK include/generated/uapi/linux/version.h Using /git/linux as source for kernel <SNIP> HOSTCC samples/bpf/trace_output_user.o /git/linux/samples/bpf/trace_output_user.c:64:6: warning: no previous prototype for 'perf_event_read' [-Wmissing-prototypes] void perf_event_read(print_fn fn) ^~~~~~~~~~~~~~~ HOSTLD samples/bpf/trace_output make[1]: Leaving directory '/tmp/build/linux' Shut up the compiler by making that function static. Acked-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Joe Stringer <joe@ovn.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20161215152927.GC6866@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20mmc: core: Further fix thread wake-upAdrian Hunter
Commit e0097cf5f2f1 ("mmc: queue: Fix queue thread wake-up") did not go far enough. mmc_wait_for_data_req_done() still contains some problems and can be further simplified. First it should not touch context_info->is_waiting_last_req because that is a wake-up control used by the owner of the context. Secondly, it should always return when one of its wake-up conditions is met because, again, that is contolled by the owner of the context. While the current block driver does not have an issue, these problems were exposed during testing of the Software Command Queue patches. Fixes: e0097cf5f2f1 ("mmc: queue: Fix queue thread wake-up") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Harjani Ritesh <riteshh@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-20mmc: sdhci: Fix to handle MMC_POWER_UNDEFINEDAdrian Hunter
Since commit c2c24819b280 ("mmc: core: Don't power off the card when starting the host"), the power state can still be MMC_POWER_UNDEFINED after mmc_start_host() is called. That can trigger a warning in SDHCI during runtime resume as it tries to restore the I/O state. Handle MMC_POWER_UNDEFINED simply by not updating the I/O state in that case. Fixes: c2c24819b280 ("mmc: core: Don't power off the card when starting the host") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-20mmc: sdhci-cadence: add Socionext UniPhier specific compatible stringMasahiro Yamada
Add a Socionext SoC specific compatible (suggested by Rob Herring). No SoC specific data are associated with the compatible strings for now, but other SoC vendors may use this IP and want to differentiate IP variants in the future. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-20x86/platform/intel/quark: Add printf attribute to imr_self_test_result()Nicolas Iooss
__printf() attributes help detecting issues in printf() format strings at compile time. Even though imr_selftest.c is only compiled with CONFIG_DEBUG_IMR_SELFTEST=y, GCC complains about a missing format attribute when compiling allmodconfig with -Wmissing-format-attribute. Silence this warning by adding the attribute. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161219132144.4108-1-nicolas.iooss_linux@m4x.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-20x86/platform/intel-mid: Switch MPU3050 driver to IIOLinus Walleij
The Intel Mid goes in and creates a I2C device for the MPU3050 if the input driver for MPU-3050 is activated. As of commit: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope") .. there is a proper and fully featured IIO driver for this device, so deprecate the use of the incomplete input driver by augmenting the device population code to react to the presence of the IIO driver's Kconfig symbol instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1481722794-4348-1-git-send-email-linus.walleij@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-20x86/alternatives: Do not use sync_core() to serialize I$Borislav Petkov
We use sync_core() in the alternatives code to stop speculative execution of prefetched instructions because we are potentially changing them and don't want to execute stale bytes. What it does on most machines is call CPUID which is a serializing instruction. And that's expensive. However, the instruction cache is serialized when we're on the local CPU and are changing the data through the same virtual address. So then, we don't need the serializing CPUID but a simple control flow change. Last being accomplished with a CALL/RET which the noinline causes. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161203150258.vwr5zzco7ctgc4pe@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-20x86/topology: Document cpu_llc_idBorislav Petkov
It means different things on Intel and AMD so write it down so that there's no confusion. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20161117094557.jm6hwzdd52h7iwnj@pd.tnic Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-20x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panicVitaly Kuznetsov
There is a feature in Hyper-V ('Debug-VM --InjectNonMaskableInterrupt') which injects NMI to the guest. We may want to crash the guest and do kdump on this NMI by enabling unknown_nmi_panic. To make kdump succeed we need to allow the kdump kernel to re-establish VMBus connection so it will see VMBus devices (storage, network,..). To properly unload VMBus making it possible to start over during kdump we need to do the following: - Send an 'unload' message to the hypervisor. This can be done on any CPU so we do this the crashing CPU. - Receive the 'unload finished' reply message. WS2012R2 delivers this message to the CPU which was used to establish VMBus connection during module load and this CPU may differ from the CPU sending 'unload'. Receiving a VMBus message means the following: - There is a per-CPU slot in memory for one message. This slot can in theory be accessed by any CPU. - We get an interrupt on the CPU when a message was placed into the slot. - When we read the message we need to clear the slot and signal the fact to the hypervisor. In case there are more messages to this CPU pending the hypervisor will deliver the next message. The signaling is done by writing to an MSR so this can only be done on the appropriate CPU. To avoid doing cross-CPU work on crash we have vmbus_wait_for_unload() function which checks message slots for all CPUs in a loop waiting for the 'unload finished' messages. However, there is an issue which arises when these conditions are met: - We're crashing on a CPU which is different from the one which was used to initially contact the hypervisor. - The CPU which was used for the initial contact is blocked with interrupts disabled and there is a message pending in the message slot. In this case we won't be able to read the 'unload finished' message on the crashing CPU. This is reproducible when we receive unknown NMIs on all CPUs simultaneously: the first CPU entering panic() will proceed to crash and all other CPUs will stop themselves with interrupts disabled. The suggested solution is to handle unknown NMIs for Hyper-V guests on the first CPU which gets them only. This will allow us to rely on VMBus interrupt handler being able to receive the 'unload finish' message in case it is delivered to a different CPU. The issue is not reproducible on WS2016 as Debug-VM delivers NMI to the boot CPU only, WS2012R2 and earlier Hyper-V versions are affected. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Cc: devel@linuxdriverproject.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Link: http://lkml.kernel.org/r/20161202100720.28121-1-vkuznets@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-19NFSv4: Retry the DELEGRETURN if the embedded GETATTR is rejected with EACCESTrond Myklebust
If our DELEGRETURN RPC call is rejected with an EACCES call, then we should remove the GETATTR call from the compound RPC and retry. This could potentially happen when there is a conflict between an ACL denying attribute reads and our use of SP4_MACH_CRED. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19NFS: Retry the CLOSE if the embedded GETATTR is rejected with EACCESTrond Myklebust
If our CLOSE RPC call is rejected with an EACCES call, then we should remove the GETATTR call from the compound RPC and retry. This could potentially happen when there is a conflict between an ACL denying attribute reads and our use of SP4_MACH_CRED. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19NFSv4: Place the GETATTR operation before the CLOSETrond Myklebust
In order to benefit from the DENY share lock protection, we should put the GETATTR operation before the CLOSE. Otherwise, we might race with a Windows machine that thinks it is now safe to modify the file. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19NFSv4: Also ask for attributes when downgrading to a READ-only stateTrond Myklebust
If we're downgrading from a READ+WRITE mode to a READ-only mode, then ask for cache consistency attributes so that we avoid the revalidation in nfs_close_context() Fixes: 3947b74d0f9d ("NFSv4: Don't request a GETATTR on open_downgrade.") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19NFS: Don't abuse NFS_INO_REVAL_FORCED in nfs_post_op_update_inode_locked()Trond Myklebust
The NFS_INO_REVAL_FORCED flag now really only has meaning for the case when we've just been handed a delegation for a file that was already cached, and we're unsure about that cache. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19pNFS: Return RW layouts on OPEN_DOWNGRADETrond Myklebust
If the client holds no more writeable open state, and does not hold a write delegation, then send a layoutreturn as part of the OPEN_DOWNGRADE. We do this only for writes, since some layout drivers may require you to also hold a read layout if you are doing a R/W workload. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19NFSv4: Add encode/decode of the layoutreturn op in OPEN_DOWNGRADETrond Myklebust
While we do not need to return the RW layout when downgrading from a read/write open state to read-only, we might want to do so in order to reduce the burden on the metadataserver so that it does not need to check for changed data when responding to GETATTR requests. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19NFS: Don't disconnect open-owner on NFS4ERR_BAD_SEQIDNeilBrown
When an NFS4ERR_BAD_SEQID is received the open-owner is removed from the ->state_owners rbtree so that it will no longer be used. If any stateids attached to this open-owner are still in use, and if a request using one gets an NFS4ERR_BAD_STATEID reply, this can for bad. The state is marked as needing recovery and the nfs4_state_manager() is scheduled to clean up. nfs4_state_manager() finds states to be recovered by walking the state_owners rbtree. As the open-owner is not in the rbtree, the bad state is not found so nfs4_state_manager() completes having done nothing. The request is then retried, with a predicatable result (indefinite retries). If the stateid is for a delegation, this open_owner will be used to open files when the delegation is returned. For that to work, a new open-owner needs to be presented to the server. This patch changes NFS4ERR_BAD_SEQID handling to leave the open-owner in the rbtree but updates the 'create_time' so it looks like a new open-owner. With this the indefinite retries no longer happen. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19NFSv4: ensure __nfs4_find_lock_state returns consistent result.NeilBrown
If a file has both flock locks and OFD locks, then it is possible that two different nfs4 lock states could apply to file accesses from a single process. It is not possible to know, efficiently, which one is "correct". Presumably the state which represents a lock that covers the region undergoing IO would be the "correct" one to use, but finding that has a non-trivial cost and would provide miniscule value. Currently we just return whichever is first in the list, which could result in inconsistent behaviour if an application ever put it self in this position. As consistent behaviour is preferable (when perfectly correct behaviour is not available), change the search to return a consistent result in this circumstance. Specifically: if there is both a flock and OFD lock state, always return the flock one. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-19NFSv4.1: nfs4_fl_prepare_ds must be careful about reporting success.NeilBrown
Various places assume that if nfs4_fl_prepare_ds() turns a non-NULL 'ds', then ds->ds_clp will also be non-NULL. This is not necessasrily true in the case when the process received a fatal signal while nfs4_pnfs_ds_connect is waiting in nfs4_wait_ds_connect(). In that case ->ds_clp may not be set, and the devid may not recently have been marked unavailable. So add a test for ds_clp == NULL and return NULL in that case. Fixes: c23266d532b4 ("NFS4.1 Fix data server connection race") Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Olga Kornievskaia <aglo@umich.edu> Acked-by: Adamson, Andy <William.Adamson@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
generated by cgit (git 2.34.1) at 2025-07-16 12:58:42 +0000