summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-19arm64: dts: qcom: sm8450: Add qup nodes for qup2Vinod Koul
qup2 has 7 SEs, so add the SEs (i2c and spi) along with pinconf for these SEs Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220414101630.1189052-6-vkoul@kernel.org
2022-04-19arm64: dts: qcom: sm8450: Add qup nodes for qup1Vinod Koul
qup1 has 7 SEs, I2C13 and I2C14 were already added so added the remaining SEs (i2c and spi) along with pinconf for these SEs Also add interconnect properties for I2C13 and I2C14 Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220414101630.1189052-5-vkoul@kernel.org
2022-04-19arm64: dts: qcom: sm8450: Add qup nodes for qup0Vinod Koul
qup0 has 7 SEs, with SE7 as uart and already added, so add the remaining 6 SEs (i2c and spi) along with pinconf for these SEs Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220414101630.1189052-4-vkoul@kernel.org
2022-04-19arm64: dts: qcom: sm8450: Fix missing iommus for qupVinod Koul
qupv3_id_0 was missing iommus property which cause any dma transaction to fail and board crash. So add the missing iommus. While at it also add interconnect nodes for qup Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220414101630.1189052-3-vkoul@kernel.org
2022-04-19arm64: dts: qcom: sm8450: Add gpi_dma nodesVinod Koul
GPI DMA can be used for DMA operations for QUP devices, so add the three gpi_dma insances found in this SoC Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220414101630.1189052-2-vkoul@kernel.org
2022-04-19arm64: dts: qcom: sm8350-hdk: Enable &gpi_dma1Bjorn Andersson
Some versions of the firmware for the SM8350 Hardware Development Kit (HDK) has FIFO mode disabled for i2c13 and must thus use GPI DMA. Enable &gpi_dma1 to allow this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220412215137.2385831-3-bjorn.andersson@linaro.org
2022-04-19arm64: dts: qcom: sm8350: Add GENI I2C/SPI DMA channelsBjorn Andersson
The GENI I2C and SPI controllers may use the GPI DMA engine, define the rx and tx channels for these controllers to enable this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220412215137.2385831-2-bjorn.andersson@linaro.org
2022-04-19arm64: dts: qcom: sm8350: Define GPI DMA enginesBjorn Andersson
The Qualcomm SM8350 has three GPI DMA engines, add definitions for these. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220412215137.2385831-1-bjorn.andersson@linaro.org
2022-04-19arm64: dts: qcom: sc7280: Add wakeup-source property for USB nodeSandeep Maheswaram
Adding wakeup-source property for USB controller in SC7280. This property is added to inform that the USB controller is wake up capable and to conditionally power down the phy during system suspend. Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1649704614-31518-7-git-send-email-quic_c_sanm@quicinc.com
2022-04-19arm64: dts: qcom: msm8996: override nodes by labelKrzysztof Kozlowski
Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220402192859.154977-2-krzysztof.kozlowski@linaro.org
2022-04-19arm64: dts: qcom: msm8994: override nodes by labelKrzysztof Kozlowski
Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220402192859.154977-1-krzysztof.kozlowski@linaro.org
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom wled backlight and ↵Joel Selvaraj
link to panel Xiaomi Poco F1 uses the QCOM WLED driver for backlight control. Enable and link it to the panel to use it. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB70092607CD7CDD8CF8BCD464D9E09@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: enable second wifi channelJoel Selvaraj
Like the c630, the Poco F1 is also capable of using both antenna channels for 2.4 and 5ghz wifi, however unlike the c630 only the first channel is used for bluetooth. Similar to Oneplus 6. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB7009E2566F9000F338432761D91F9@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: fix typo in panel's vddio-supply ↵Joel Selvaraj
property vddio is misspelled with a "0" instead of "o". Fix it. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB7009901651E6A8D5ACB0425ED91F9@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom ipa driverJoel Selvaraj
Enable Qualcomm IP Accelerator (IPA) driver for mobile data functionality which works by using ModemManager. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB7009405D7C06C0B480974063D91F9@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: sdm845-xiaomi-beryllium: change firmware path and use mbn ↵Joel Selvaraj
format The "qcom/sdm845/" path conflicts with db845c's firmware that are present in the linux-firmware package. Xiaomi uses their own signed firmware for Poco F1 and can't use the db845c's firmware. So let's use "qcom/sdm845/beryllium/" to distinguish Poco F1's firmware files. For easier handling and packaging, the mdt+bXX files are squashed using Bjorn Andersson's pil-squasher tool from this link: https://github.com/andersson/pil-squasher Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/BY5PR02MB700966DEE6F6044EBEB5B892D91F9@BY5PR02MB7009.namprd02.prod.outlook.com
2022-04-19arm64: dts: qcom: do not use underscore in BCM node nameKrzysztof Kozlowski
Align BCM voter node with DT schema by using hyphen instead of underscore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220411085935.130072-3-krzysztof.kozlowski@linaro.org
2022-04-19arm64: dts: qcom: sm8450: Add thermal zonesVladimir Zapolskiy
Add thermal zones handled by tsens sensors. The definitions and the trip points were taken from the downstream dts. For the CPU core thermal sensors, the trip points were changed to follow the example of other Qualcomm platforms. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220410234458.1739279-3-dmitry.baryshkov@linaro.org
2022-04-19arm64: dts: qcom: sm8450: Add thermal sensor controllersVladimir Zapolskiy
The change adds description of two thermal sensor controllers found on SM8450. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220410234458.1739279-2-dmitry.baryshkov@linaro.org
2022-04-19arm64: dts: qcom: msm8998: reserve potentially inaccessible clocksMichael Srba
With the gcc driver now being more complete and describing clocks which might not always be write-accessible to the OS, conservatively specify all such clocks as protected in the SoC dts. The board dts - or even user-supplied dts - can override this property to reflect the actual configuration. Signed-off-by: Michael Srba <michael.srba@seznam.cz> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220411072156.24451-6-michael.srba@seznam.cz
2022-04-19Merge branch '20220411072156.24451-2-michael.srba@seznam.cz' into arm64-for-5.19Bjorn Andersson
2022-04-19dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocksMichael Srba
Add definitions of four clocks which need to be manipulated in order to initialize the AHB bus which exposes the SCC block in the global address space. Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220411072156.24451-2-michael.srba@seznam.cz
2022-04-12arm64: dts: qcom: add RPM clock controller fallback compatibleKrzysztof Kozlowski
The bindings require a fallback compatible to RPM clock controller. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220401201035.189106-4-krzysztof.kozlowski@linaro.org
2022-04-12arm64: dts: qcom: msm8994: remove SMD qcom,local-pid propertyKrzysztof Kozlowski
The Qualcomm SMD does not use qcom,local-pid property. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220401201035.189106-3-krzysztof.kozlowski@linaro.org
2022-04-12arm64: dts: qcom: msm8953: do not use underscore in node nameKrzysztof Kozlowski
Align RPM requests node with DT schema by using hyphen instead of underscore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220401201035.189106-2-krzysztof.kozlowski@linaro.org
2022-04-12arm64: dts: qcom: sm7225-fairphone-fp4: Enable wifiLuca Weiss
Configure regulators used by the wifi hardware and enable it. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220325101841.172304-2-luca.weiss@fairphone.com
2022-04-12arm64: dts: qcom: sm6350: Add wifi nodeLuca Weiss
Add a node describing the wifi hardware found on sm6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220325101841.172304-1-luca.weiss@fairphone.com
2022-04-12arm64: dts: qcom: msm8994: Add mmc aliasesKonrad Dybcio
Set the aliases for both SDHCI controllers. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-16-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8994: Add watchdog timer nodeKonrad Dybcio
Add and configure the watchdog node. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-15-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8994: Fix BLSP[12]_DMA channels countKonrad Dybcio
MSM8994 actually features 24 DMA channels for each BLSP, fix it! Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-14-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8994: Add OCMEM nodeKonrad Dybcio
Add OCMEM node to allow for GPU SRAM access. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-13-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8994-kitakami: Update regulator configurationKonrad Dybcio
Remove regulator-always-on property where not necessary and mark regulators that are not supposed to be voted active on boot with regulator-boot-on. While at it, reorder the load properties to make it look more decent. Reorder PMICs to fix a probe defer caused by messy dependencies and Linux's inability to handle them (at least for now). Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-12-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8994-kitakami: Disable a mistakengly enabled I2C hostKonrad Dybcio
I2C4 turns out not to be used on Kitakami after all and it only blocks a GPIO used by camera hardware. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-11-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8992-libra: Fix up the framebufferKonrad Dybcio
Make sure the necessary clocks are kept on after clk_cleanup (until MDSS is properly handled by its own driver) and touch up the fb address to prevent some weird shifting. It's still not perfect, but at least the kernel log doesn't start a third deep into your screen.. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> [bjorn: Folded in change of framebuffer base address, from Konrad] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-10-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8994: Fix the cont_splash_mem addressKonrad Dybcio
The default memory map places cont_splash_mem at 3401000, which was overlooked.. Fix it! Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-9-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8992: Use the correct MMCC compatibleKonrad Dybcio
Now that proper msm8992 support is in the driver, switch to the new compatible. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-8-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8992: Use the correct GCC compatibleKonrad Dybcio
Now that proper msm8992 support is in the driver, switch to the new compatible. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-7-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8994: Add MMCC nodeKonrad Dybcio
Describe the Multimedia Clock Controller block in the DT. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-6-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8992-libra: Remove superfluous status = "okay"Konrad Dybcio
The framebuffer is already enabled by default. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-5-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8992-libra: Temporarily restrict CPU count to 1Konrad Dybcio
The phone seems to randomly crash when more than 1 CPU is enabled, which is probably related to lack of some driver. Restrict the device to only use a single core until this is solved. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-4-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8992-libra: Add CPU regulatorsKonrad Dybcio
Specify CPU regulator voltages for both VDD_APC rails. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-3-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: msm8994: Fix sleep clock nameKonrad Dybcio
The sleep clock name expected by GCC is actually "sleep" and not "sleep_clk". Fix the clock-names value for it to make sure it is provided. Fixes: 9204da57cd65 ("arm64: dts: qcom: msm8994: Provide missing "xo_board" and "sleep_clk" to GCC") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220319174645.340379-2-konrad.dybcio@somainline.org
2022-04-12arm64: dts: qcom: sc7280: Support gpu speedbinAkhil P Oommen
Add speedbin fuse and additional OPPs for gpu to support sc7280 SKUs. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226005021.v2.5.I4c2cb95f06f0c37038c80cc1ad20563fdf0618e2@changeid
2022-04-12arm64: dts: qcom: ipq8074: fix the sleep clock frequencyKathiravan T
Sleep clock frequency should be 32768Hz. Lets fix it. Cc: stable@vger.kernel.org Fixes: 41dac73e243d ("arm64: dts: Add ipq8074 SoC and HK01 board support") Link: https://lore.kernel.org/all/e2a447f8-6024-0369-f698-2027b6edcf9e@codeaurora.org/ Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1644581655-11568-1-git-send-email-quic_kathirav@quicinc.com
2022-04-12arm64: dts: qcom: sm8250: Drop flags for mdss irqsDmitry Baryshkov
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220302225411.2456001-5-dmitry.baryshkov@linaro.org
2022-04-12arm64: dts: qcom: sdm845: Drop flags for mdss irqsDmitry Baryshkov
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Fixes: 08c2a076d18f ("arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220302225411.2456001-4-dmitry.baryshkov@linaro.org
2022-04-12arm64: dts: qcom: sdm660: Drop flags for mdss irqsDmitry Baryshkov
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Fixes: ab290284398d ("arm64: dts: qcom: sdm660: Add required nodes for DSI1") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220302225411.2456001-3-dmitry.baryshkov@linaro.org
2022-04-12arm64: dts: qcom: sdm630: Drop flags for mdss irqsDmitry Baryshkov
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Fixes: b52555d590d1 ("arm64: dts: qcom: sdm630: Add MDSS nodes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220302225411.2456001-2-dmitry.baryshkov@linaro.org
2022-04-12arm64: dts: qcom: msm8996: Drop flags for mdss irqsDmitry Baryshkov
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Fixes: 12d540375736 ("arm64: dts: qcom: msm8996: Add DSI0 nodes") Fixes: 3a4547c1fc2f ("arm64: qcom: msm8996.dtsi: Add Display nodes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220302225411.2456001-1-dmitry.baryshkov@linaro.org
2022-04-12arm64: dts: qcom: sm8450-hdk: add pcie nodesDmitry Baryshkov
Add device tree nodes for PCIe0/PCIe1 controllers and corresponding PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220301061500.2110569-8-dmitry.baryshkov@linaro.org
generated by cgit (git 2.34.1) at 2025-07-15 11:35:24 +0000