| Age | Commit message (Collapse) | Author |
|---|
|
Add support for 32-bit offset jmp instruction. Currently, we use b
instruction which supports range within ±128MB for such jumps. This
should be large enough for BPF progs.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for unconditional bswap instruction. Since LoongArch is
always little-endian, just treat unconditional bswap the same as big-
endian conversion.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for sign-extension mov instructions.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for sign-extension load instructions.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch adds more instruction opcodes and their corresponding emit_*
helpers which will be used in later patches.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
rcutree_report_cpu_starting() must be called before cpu_probe() to avoid
the following lockdep splat that triggered by calling __alloc_pages() when
CONFIG_PROVE_RCU_LIST=y:
=============================
WARNING: suspicious RCU usage
6.6.0+ #980 Not tainted
-----------------------------
kernel/locking/lockdep.c:3761 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
1 lock held by swapper/1/0:
#0: 900000000c82ef98 (&pcp->lock){+.+.}-{2:2}, at: get_page_from_freelist+0x894/0x1790
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.0+ #980
Stack : 0000000000000001 9000000004f79508 9000000004893670 9000000100310000
90000001003137d0 0000000000000000 90000001003137d8 9000000004f79508
0000000000000000 0000000000000001 0000000000000000 90000000048a3384
203a656d616e2065 ca43677b3687e616 90000001002c3480 0000000000000008
000000000000009d 0000000000000000 0000000000000001 80000000ffffe0b8
000000000000000d 0000000000000033 0000000007ec0000 13bbf50562dad831
9000000005140748 0000000000000000 9000000004f79508 0000000000000004
0000000000000000 9000000005140748 90000001002bad40 0000000000000000
90000001002ba400 0000000000000000 9000000003573ec8 0000000000000000
00000000000000b0 0000000000000004 0000000000000000 0000000000070000
...
Call Trace:
[<9000000003573ec8>] show_stack+0x38/0x150
[<9000000004893670>] dump_stack_lvl+0x74/0xa8
[<900000000360d2bc>] lockdep_rcu_suspicious+0x14c/0x190
[<900000000361235c>] __lock_acquire+0xd0c/0x2740
[<90000000036146f4>] lock_acquire+0x104/0x2c0
[<90000000048a955c>] _raw_spin_lock_irqsave+0x5c/0x90
[<900000000381cd5c>] rmqueue_bulk+0x6c/0x950
[<900000000381fc0c>] get_page_from_freelist+0xd4c/0x1790
[<9000000003821c6c>] __alloc_pages+0x1bc/0x3e0
[<9000000003583b40>] tlb_init+0x150/0x2a0
[<90000000035742a0>] per_cpu_trap_init+0xf0/0x110
[<90000000035712fc>] cpu_probe+0x3dc/0x7a0
[<900000000357ed20>] start_secondary+0x40/0xb0
[<9000000004897138>] smpboot_entry+0x54/0x58
raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.
See also commit 29368e093921 ("x86/smpboot: Move rcu_cpu_starting() earlier"),
commit de5d9dae150c ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b62322 ("powerpc/smp: Call rcu_cpu_starting() earlier").
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch relaxes the implementation while satisfying the memory ordering
requirements for atomic operations, which will help improve performance on
LA664+.
Unixbench with full threads (8)
before after
Dhrystone 2 using register variables 203910714.2 203909539.8 0.00%
Double-Precision Whetstone 37930.9 37931 0.00%
Execl Throughput 29431.5 29545.8 0.39%
File Copy 1024 bufsize 2000 maxblocks 6645759.5 6676320 0.46%
File Copy 256 bufsize 500 maxblocks 2138772.4 2144182.4 0.25%
File Copy 4096 bufsize 8000 maxblocks 11640698.4 11602703 -0.33%
Pipe Throughput 8849077.7 8917009.4 0.77%
Pipe-based Context Switching 1255108.5 1287277.3 2.56%
Process Creation 50825.9 50442.1 -0.76%
Shell Scripts (1 concurrent) 25795.8 25942.3 0.57%
Shell Scripts (8 concurrent) 3812.6 3835.2 0.59%
System Call Overhead 9248212.6 9353348.6 1.14%
=======
System Benchmarks Index Score 8076.6 8114.4 0.47%
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
A recent change to the optimization pipeline in LLVM reveals some
fragility around the inlining of LoongArch's __percpu functions, which
manifests as a BUILD_BUG() failure:
In file included from kernel/sched/build_policy.c:17:
In file included from include/linux/sched/cputime.h:5:
In file included from include/linux/sched/signal.h:5:
In file included from include/linux/rculist.h:11:
In file included from include/linux/rcupdate.h:26:
In file included from include/linux/irqflags.h:18:
arch/loongarch/include/asm/percpu.h:97:3: error: call to '__compiletime_assert_51' declared with 'error' attribute: BUILD_BUG failed
97 | BUILD_BUG();
| ^
include/linux/build_bug.h:59:21: note: expanded from macro 'BUILD_BUG'
59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
| ^
include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^
include/linux/compiler_types.h:425:2: note: expanded from macro 'compiletime_assert'
425 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:413:2: note: expanded from macro '_compiletime_assert'
413 | __compiletime_assert(condition, msg, prefix, suffix)
| ^
include/linux/compiler_types.h:406:4: note: expanded from macro '__compiletime_assert'
406 | prefix ## suffix(); \
| ^
<scratch space>:86:1: note: expanded from here
86 | __compiletime_assert_51
| ^
1 error generated.
If these functions are not inlined (which the compiler is free to do
even with functions marked with the standard 'inline' keyword), the
BUILD_BUG() in the default case cannot be eliminated since the compiler
cannot prove it is never used, resulting in a build failure due to the
error attribute.
Mark these functions as __always_inline to guarantee inlining so that
the BUILD_BUG() only triggers when the default case genuinely cannot be
eliminated due to an unexpected size.
Cc: <stable@vger.kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1955
Fixes: 46859ac8af52 ("LoongArch: Add multi-processor (SMP) support")
Link: https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The distance between vmlinux and the module is too far so that PC-REL
cannot be accessed directly, only GOT.
When compiling module with GCC, the option `-mdirect-extern-access` is
disabled by default. The Clang option `-fdirect-access-external-data` is
enabled by default, so it needs to be explicitly disabled.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Since commit 4e90d0522a688371402c ("riscv: support PREEMPT_DYNAMIC with
static keys"), the infrastructure is complete and we can simply select
HAVE_PREEMPT_DYNAMIC_KEY to enable PREEMPT_DYNAMIC on LoongArch because
we already support static keys.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
NETLINK_MAX_FMTMSG_LEN
NETLINK_MAX_FMTMSG_LEN is currently hardcoded to 80, and we provide an
error printf-formatted string having 96 characters including the
terminating \0. Assuming each %d (representing a queue) gets replaced by
a number having at most 2 digits (a reasonable assumption), the final
string is also 96 characters wide, which is too much.
Reduce the verbiage a bit by removing some (partially) redundant words,
which makes the new printf-formatted string be 73 characters wide with
the trailing newline.
Fixes: 800db2d125c2 ("net: enetc: ensure we always have a minimum number of TXQs for stack")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202311061336.4dsWMT1h-lkp@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231106160311.616118-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KMSAN reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Uninit was stored to memory at:
virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline]
virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Uninit was created at:
slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x2fd/0x770 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline]
virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58
virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline]
virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: vsock-loopback vsock_loopback_work
=====================================================
The following simple reproducer can cause the issue described above:
int main(void)
{
int sock;
struct sockaddr_vm addr = {
.svm_family = AF_VSOCK,
.svm_cid = VMADDR_CID_ANY,
.svm_port = 1234,
};
sock = socket(AF_VSOCK, SOCK_STREAM, 0);
connect(sock, (struct sockaddr *)&addr, sizeof(addr));
return 0;
}
This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the
`struct virtio_vsock_hdr` are not initialized when a new skb is allocated
in `virtio_transport_init_hdr()`. This patch resolves the issue by
initializing these fields during allocation.
Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Reported-and-tested-by: syzbot+0c8ce1da0ac31abbadcd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c8ce1da0ac31abbadcd
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231104150531.257952-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
So far we ignore the setting of IFF_MULTICAST. Fix this and clear bit
AcceptMulticast if IFF_MULTICAST isn't set.
Note: Based on the implementations I've seen it doesn't seem to be 100% clear
what a driver is supposed to do if IFF_ALLMULTI is set but IFF_MULTICAST
is not. This patch is based on the understanding that IFF_MULTICAST has
precedence.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4a57ba02-d52d-4369-9f14-3565e6c1f7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These add new hardware support to a cpufreq driver and fix cpupower
utility documentation:
- Add support for several Qualcomm SoC versions to the Qualcomm
cpufreq driver (Robert Marko, Varadarajan Narayanan)
- Fix a reference to a removed document in the cpupower utility
documentation (Vegard Nossum)"
* tag 'pm-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx
cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx
cpufreq: qcom-nvmem: add support for IPQ8074
cpupower: fix reference to nonexistent document
|
|
Pull more drm updates from Dave Airlie:
"Geert pointed out I missed the renesas reworks in my main pull, so
this pull contains the renesas next work for atomic conversion and DT
support.
It also contains a bunch of amdgpu and some small ssd13xx fixes.
renesas:
- atomic conversion
- DT support
ssd13xx:
- dt binding fix for ssd132x
- Initialize ssd130x crtc_state to NULL.
amdgpu:
- Fix RAS support check
- RAS fixes
- MES fixes
- SMU13 fixes
- Contiguous memory allocation fix
- BACO fixes
- GPU reset fixes
- Min power limit fixes
- GFX11 fixes
- USB4/TB hotplug fixes
- ARM regression fix
- GFX9.4.3 fixes
- KASAN/KCSAN stack size check fixes
- SR-IOV fixes
- SMU14 fixes
- PSP13 fixes
- Display blend fixes
- Flexible array size fixes
amdkfd:
- GPUVM fix
radeon:
- Flexible array size fixes"
* tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits)
drm/amd/display: Enable fast update on blendTF change
drm/amd/display: Fix blend LUT programming
drm/amd/display: Program plane color setting correctly
drm/amdgpu: Query and report boot status
drm/amdgpu: Add psp v13 function to query boot status
drm/amd/swsmu: remove fw version check in sw_init.
drm/amd/swsmu: update smu v14_0_0 driver if and metrics table
drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks
drm/amdgpu: Optimize the asic type fix code
drm/amdgpu: fix GRBM read timeout when do mes_self_test
drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count
drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs
drm/amdgpu: Attach eviction fence on alloc
drm/amdkfd: Improve amdgpu_vm_handle_moved
drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2
drm/amd/display: Avoid NULL dereference of timing generator
drm/amdkfd: Update cache info for GFX 9.4.3
drm/amdkfd: Populate cache info for GFX 9.4.3
drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64
drm/amdgpu/smu13: drop compute workload workaround
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"One fix here, for an interaction between noinc registers and caches.
If a device uses noinc registers (which is rare) then we could corrupt
registers after the noinc register in the cache"
* tag 'regmap-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: prevent noinc writes from clobbering cache
|
|
If set_smb1_rsp_status() is not implemented, It will cause NULL pointer
dereferece error when client send malformed smb1 message.
This patch add set_smb1_rsp_status() to ignore malformed smb1 message.
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix argument list that the kdoc format and script verified in
ksmbd_vfs_kern_path_locked().
fs/smb/server/vfs.c:1207: warning: Function parameter or member 'parent_path'
not described in 'ksmbd_vfs_kern_path_locked'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
slab out-of-bounds write is caused by that offsets is bigger than pntsd
allocation size. This patch add the check to validate 3 offsets using
allocation size.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22271
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Support for controlling the second core in Mediatek's SCP dual-core
setup is introduced.
Support for audio, compute and modem DSPs on Qualcomm SM6375, and the
audio DSP in SC7180 are introduced. The peripheral NoC clock is
dropped from MSM8996 modem DSP, as this is handled through the
interconnect provider.
In the zynqmp driver the setup for TCM memory, and device address
translation thereof, when operating in lockstep mode is corrected.
A few bug fixes and cleanups are introduces across the ST and STM32
remoteproc drivers"
* tag 'rproc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits)
remoteproc: st: Fix sometimes uninitialized ret in st_rproc_probe()
remoteproc: st: Use device_get_match_data()
remoteproc: zynqmp: Change tcm address translation method
remoteproc: mediatek: Refactor single core check and fix retrocompatibility
remoteproc: qcom: q6v5-mss: Remove PNoC clock from 8996 MSS
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Remove PNoC clock
dt-bindings: remoteproc: qcom,adsp: Remove AGGRE2 clock
remoteproc: qcom: pas: Add SM6375 MPSS
remoteproc: qcom: pas: Add SM6375 ADSP & CDSP
dt-bindings: remoteproc: qcom,sm6375-pas: Document remoteprocs
dt-bindings: remoteproc: pru: Add Interrupt property
remoteproc: qcom: pas: Add sc7180 adsp
dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
arm64: dts: mediatek: Update the node name of SCP rpmsg subnode
remoteproc: zynqmp: fix TCM carveouts in lockstep mode
remoteproc: mediatek: Refine ipi handler error message
remoteproc: mediatek: Report watchdog crash to all cores
remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout
remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset
remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power control on dual-core SCP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This replaces a number of strncpy() instances with strscpy() or
strscpy_pad() through the rpmsg core and virtio implementation"
* tag 'rpmsg-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: virtio: Replace deprecated strncpy with strscpy/_pad
rpmsg: Replace deprecated strncpy with strscpy_pad
rpmsg: core: Replace deprecated strncpy with strscpy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull PCMCIA updates from Dominik Brodowski:
"Cleanups and fixes.
Yang Yingliang has fixed a number of resource leaks and Dongliang Mu
contributed a spelling fix for the PCMCIA core. Also included is a
tiny clenaup to the tcic PCMCIA socket driver provided by lizhe"
* tag 'pcmcia-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: tcic: remove unneeded "&" in call to setup_timer()
pcmcia: typo fix
pcmcia: ds: fix possible name leak in error path in pcmcia_device_add()
pcmcia: ds: fix refcount leak in pcmcia_device_add()
pcmcia: cs: fix possible hung task and memory leak pccardd()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio/pinctrl updates from Bartosz Golaszewski:
"The bulk of it is a rework of the glue layer between pinctrl and GPIO.
We changed the signature of GPIO helpers for pinctrl to taking the
gpio_chip/offset pair as arguments instead of using the deprecated
global GPIO numberspace.
The last little bit is removing the gpiochip_find() function as it now
has no more users in-tree.
Summary:
- rework the GPIO-to-pinctrl glue code to stop using the deprecated
global GPIO numberspace
- remove now unused wrappers around pinctrl GPIO helpers from drivers
- remove gpiochip_find() as it has no more users"
* tag 'gpio-pinctrl-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (70 commits)
pinctrl: tegra: drop the wrapper around pinctrl_gpio_request()
pinctrl: em: drop the wrapper around pinctrl_gpio_request()
pinctrl: nuvoton: npcm8xx: drop wrappers around pinctrl_gpio_request/free()
pinctrl: nuvoton: npcm7xx: drop wrappers around pinctrl_gpio_request/free()
pinctrl: stm32: drop wrappers around pinctrl_gpio_free/input()
pinctrl: starfive: jh7110: drop wrappers around pinctrl_gpio_request/free()
pinctrl: starfive: jh7100: drop wrappers around pinctrl_gpio_request/free()
pinctrl: ocelot: drop the wrapper around pinctrl_gpio_direction_input()
pinctrl: cirrus: drop the wrapper around pinctrl_gpio_direction_input()
pinctrl: mediatek: common: drop the wrappers around pinctrl_gpio_direction_input()
pinctrl: mediatek: moore: drop the wrappers around pinctrl_gpio_direction_input()
pinctrl: rk805: drop the wrapper around pinctrl_gpio_direction_input()
pinctrl: axp209: drop the wrapper around pinctrl_gpio_direction_input()
pinctrl: vt8500: drop the wrapper around pinctrl_gpio_direction_input()
pinctrl: as3722: drop the wrapper around pinctrl_gpio_direction_input()
pinctrl: ingenic: drop the wrapper around pinctrl_gpio_direction_input()
pinctrl: st: drop the wrapper around pinctrl_gpio_direction_input()
pinctrl: change the signature of pinctrl_ready_for_gpio_range()
pinctrl: change the signature of gpio_to_pin()
pinctrl: change the signature of pinctrl_match_gpio_range()
...
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
This reverts commit 5b6fba546da246b3d0dd8465c07783e22629cc53.
Commit 5b6fba546da2 ("ata: libata-core: Detach a port devices on
shutdown") modified the function ata_pci_shutdown_one() to stop
(suspend) devices attached to the ports of a PCI AHCI adapter to ensure
that drives are spun down before shutting down a system. However, this
is done only for PCI adapters and not for other types of adapters. This
limitation was addressed with commit 24eca2dce0f8 ("scsi: sd: Introduce
manage_shutdown device flag"). With this, all ATA disks are spun down on
system shutdown, which make the changes introduced with 5b6fba546da2
useless.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
|
|
bpf_iter_reg'
Chuyi Zhou says:
====================
The patchset aims to let the BPF verivier consider
bpf_iter__cgroup->cgroup and bpf_iter__task->task is trusted suggested by
Alexei[1].
Please see individual patches for more details. And comments are always
welcome.
Link[1]:https://lore.kernel.org/bpf/20231022154527.229117-1-zhouchuyi@bytedance.com/T/#mb57725edc8ccdd50a1b165765c7619b4d65ed1b0
v2->v1:
* Patch #1: Add Yonghong's ack and add description of similar case in
log.
* Patch #2: Add Yonghong's ack
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Commit f49843afde (selftests/bpf: Add tests for css_task iter combining
with cgroup iter) added a test which demonstrates how css_task iter can be
combined with cgroup iter. That test used bpf_cgroup_from_id() to convert
bpf_iter__cgroup->cgroup to a trusted ptr which is pointless now, since
with the previous fix, we can get a trusted cgroup directly from
bpf_iter__cgroup.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-3-zhouchuyi@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
BTF_TYPE_SAFE_TRUSTED(struct bpf_iter__task) in verifier.c wanted to
teach BPF verifier that bpf_iter__task -> task is a trusted ptr. But it
doesn't work well.
The reason is, bpf_iter__task -> task would go through btf_ctx_access()
which enforces the reg_type of 'task' is ctx_arg_info->reg_type, and in
task_iter.c, we actually explicitly declare that the
ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL.
Actually we have a previous case like this[1] where PTR_TRUSTED is added to
the arg flag for map_iter.
This patch sets ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL |
PTR_TRUSTED in task_reg_info.
Similarly, bpf_cgroup_reg_info -> cgroup is also PTR_TRUSTED since we are
under the protection of cgroup_mutex and we would check cgroup_is_dead()
in __cgroup_iter_seq_show().
This patch is to improve the user experience of the newly introduced
bpf_iter_css_task kfunc before hitting the mainline. The Fixes tag is
pointing to the commit introduced the bpf_iter_css_task kfunc.
Link[1]:https://lore.kernel.org/all/20230706133932.45883-3-aspsk@isovalent.com/
Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-2-zhouchuyi@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Probing for misaligned access speed takes about 0.06 seconds. On a
system with 64 cores, doing this in smp_callin() means it's done
serially, extending boot time by 3.8 seconds. That's a lot of boot time.
Instead of measuring each CPU serially, let's do the measurements on
all CPUs in parallel. If we disable preemption on all CPUs, the
jiffies stop ticking, so we can do this in stages of 1) everybody
except core 0, then 2) core 0. The allocations are all done outside of
on_each_cpu() to avoid calling alloc_pages() with interrupts disabled.
For hotplugged CPUs that come in after the boot time measurement,
register CPU hotplug callbacks, and do the measurement there. Interrupts
are enabled in those callbacks, so they're fine to do alloc_pages() in.
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/all/mhng-9359993d-6872-4134-83ce-c97debe1cf9a@palmer-ri-x1c9/T/#mae9b8f40016f9df428829d33360144dc5026bcbf
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Signed-off-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231106225855.3121724-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This function shouldn't be __init, since it's called during hotplug. The
warning says it well enough:
WARNING: modpost: vmlinux: section mismatch in reference:
check_unaligned_access_all_cpus+0x13a (section: .text) ->
unaligned_emulation_finish (section: .init.text)
Signed-off-by: Evan Green <evan@rivosinc.com>
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Link: https://lore.kernel.org/r/20231106231105.3141413-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In /proc/cpuinfo, most of the information we show for each processor is
specific to that hart: marchid, mvendorid, mimpid, processor, hart,
compatible, and the mmu size. But the ISA string gets filtered through a
lowest common denominator mask, so that if one CPU is missing an ISA
extension, no CPUs will show it.
Now that we track the ISA extensions for each hart, let's report ISA
extension info accurately per-hart in /proc/cpuinfo. We cannot change
the "isa:" line, as usermode may be relying on that line to show only
the common set of extensions supported across all harts. Add a new "hart
isa" line instead, which reports the true set of extensions for that
hart.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231106232439.3176268-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Without this I get a bunch of warnings along the lines of
arch/riscv/kernel/module.c:535:26: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
535 | [R_RISCV_32] = { apply_r_riscv_32_rela },
This just mades the member initializers explicit instead of positional.
I also aligned some of the table, but mostly just to make the batch
editing go faster.
Fixes: b51fc88cb35e ("Merge patch series "riscv: Add remaining module relocations and tests"")
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231107155529.8368-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
A handful of module relocations were missing, this patch includes the
remaining ones. I also wrote some test cases to ensure that module
loading works properly. Some relocations cannot be supported in the
kernel, these include the ones that rely on thread local storage and
dynamic linking.
This patch also overhauls the implementation of ADD/SUB/SET/ULEB128
relocations to handle overflow. "Overflow" is different for ULEB128
since it is a variable-length encoding that the compiler can be expected
to generate enough space for. Instead of overflowing, ULEB128 will
expand into the next 8-bit segment of the location.
A psABI proposal [1] was merged that mandates that SET_ULEB128 and
SUB_ULEB128 are paired, however the discussion following the merging of
the pull request revealed that while the pull request was valid, it
would be better for linkers to properly handle this overflow. This patch
proactively implements this methodology for future compatibility.
This can be tested by enabling KUNIT, RUNTIME_KERNEL_TESTING_MENU, and
RISCV_MODULE_LINKING_KUNIT.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/403
* b4-shazam-merge:
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-0-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add test cases for the two main groups of relocations added: SUB and
SET, along with uleb128.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-3-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add all final module relocations and add error logs explaining the ones
that are not supported. Implement overflow checks for
ADD/SUB/SET/ULEB128 relocations.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-2-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With the C-extension regular 32bit instructions are not
necessarily aligned on 4-byte boundaries. RISC-V instructions
are in fact an ordered list of 16bit little-endian
"parcels", so access the instruction as such.
This should also make the code work in case someone builds
a big-endian RISC-V machine.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-1-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
SFP module is present, but no fiber connected, so definitely no carrier.
After booting, eth2 is down, but netdev LED trigger surprisingly reports
link active. Then, after "ip link set eth2 up", the link indicator goes
away - as I would have expected it from the beginning.
It turns out, that the default carrier state after netdev creation is
"carrier ok". Some ethernet drivers explicitly call netif_carrier_off
during probing, others (like mvneta) don't - which explains the current
behaviour: only when the device is brought up, phylink_start calls
netif_carrier_off.
Fix this for all drivers using phylink, by calling netif_carrier_off in
phylink_create.
Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Cc: stable@vger.kernel.org
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Filippo Storniolo says:
====================
vsock: fix server prevents clients from reconnecting
This patch series introduce fix and tests for the following vsock bug:
If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.
This bug does not occur when the server socket is closed.
More details on the first patch changelog.
The remaining patches are refactoring and test.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This add bind connect test which creates a listening server socket
and tries to connect a client with a bound local port to it twice.
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preliminary patch to introduce SOCK_STREAM bind connect test.
vsock_accept() is split into vsock_listen() and vsock_accept().
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add check on socket() return value in vsock_listen()
and vsock_connect()
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.
This bug does not occur when the server socket is closed:
virtio_transport_release() will eventually schedule a call to
virtio_transport_do_close() and the latter will remove the socket
from the bound and connected socket lists and clear the sk_buff.
However, virtio_transport_do_close() will only perform the above
actions if it has been scheduled, and this will not happen
if the server is processing the shutdown message from a remote peer.
To fix this, introduce a call to vsock_remove_sock()
when the server is handling a client disconnect.
This is to remove the socket from the bound and connected socket
lists without clearing the sk_buff.
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Tested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clang warns (or errors with CONFIG_WERROR=y) when CONFIG_TCP_AO is set:
net/ipv4/tcp_output.c:663:2: error: label at end of compound statement is a C23 extension [-Werror,-Wc23-extensions]
663 | }
| ^
1 error generated.
On earlier releases (such as clang-11, the current minimum supported
version for building the kernel) that do not support C23, this was a
hard error unconditionally:
net/ipv4/tcp_output.c:663:2: error: expected statement
}
^
1 error generated.
While adding a semicolon after the label would resolve this, it is more
in line with the kernel as a whole to refactor this block into a
standalone function, which means the goto a label construct can just be
replaced with a return statement. Do so to resolve the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1953
Fixes: 1e03d32bea8e ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TX ring maintained by the tg3 driver can end up in the state, when it
has packets queued for sending but the NIC hardware is not informed, so no
progress is made. This leads to a multi-second interruption in network
traffic followed by dev_watchdog() firing and resetting the queue.
The specific sequence of steps is:
1. tg3_start_xmit() is called at least once and queues packet(s) without
updating tnapi->prodmbox (netdev_xmit_more() returns true)
2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be
called.
3. tg3_tso_bug() determines that the SKB is too large, ...
if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) {
... stops the queue, and returns NETDEV_TX_BUSY:
netif_tx_stop_queue(txq);
...
if (tg3_tx_avail(tnapi) <= frag_cnt_est)
return NETDEV_TX_BUSY;
4. Since all tg3_tso_bug() call sites directly return, the code updating
tnapi->prodmbox is skipped.
5. The queue is stuck now. tg3_start_xmit() is not called while the queue
is stopped. The NIC is not processing new packets because
tnapi->prodmbox wasn't updated. tg3_tx() is not called by
tg3_poll_work() because the all TX descriptions that could be freed has
been freed:
/* run TX completion thread */
if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
tg3_tx(tnapi);
6. Eventually, dev_watchdog() fires triggering a reset of the queue.
This fix makes sure that the tnapi->prodmbox update happens regardless of
the reason tg3_start_xmit() returned.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace 'weed' with 'we' in the comment.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fanotify fsid updates from Christian Brauner:
"This work is part of the plan to enable fanotify to serve as a drop-in
replacement for inotify. While inotify is availabe on all filesystems,
fanotify currently isn't.
In order to support fanotify on all filesystems two things are needed:
(1) all filesystems need to support AT_HANDLE_FID
(2) all filesystems need to report a non-zero f_fsid
This contains (1) and allows filesystems to encode non-decodable file
handlers for fanotify without implementing any exportfs operations by
encoding a file id of type FILEID_INO64_GEN from i_ino and
i_generation.
Filesystems that want to opt out of encoding non-decodable file ids
for fanotify that don't support NFS export can do so by providing an
empty export_operations struct.
This also partially addresses (2) by generating f_fsid for simple
filesystems as well as freevxfs. Remaining filesystems will be dealt
with by separate patches.
Finally, this contains the patch from the current exportfs maintainers
which moves exportfs under vfs with Chuck, Jeff, and Amir as
maintainers and vfs.git as tree"
* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: create an entry for exportfs
fs: fix build error with CONFIG_EXPORTFS=m or not defined
freevxfs: derive f_fsid from bdev->bd_dev
fs: report f_fsid from s_dev for "simple" filesystems
exportfs: support encoding non-decodeable file handles by default
exportfs: define FILEID_INO64_GEN* file handle types
exportfs: make ->encode_fh() a mandatory method for NFS export
exportfs: add helpers to check if filesystem can encode/decode file handles
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap maintainership rotation from Christian Brauner:
"As discussed on list last week this makes fs/iomap part of vfs.git
with Darrick as main reviewer"
* tag 'vfs-6.7.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: rename iomap entry
iomap: rotate maintainers
|
