| Age | Commit message (Collapse) | Author |
|---|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-13-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-12-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-11-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-10-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-9-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-8-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-7-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-6-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-5-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-4-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-3-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-2-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-1-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
At a high-level, detachable Trogdors (sometimes known as Strongbads)
don't have a cros_ec keyboard, while all clamshell Trogdors (only known
as Trogdors) always have a cros_ec keyboard. Looking closer though, all
clamshells have a USB type-A connector and a hardwired USB camera. And
all detachables replace the USB camera with a MIPI based one and swap
the USB type-a connector for the detachable keyboard pogo pins.
Split the detachable and clamshell bits into different files so we can
describe these differences in one place instead of in each board that
includes sc7180-trogdor.dtsi. For now this is just the keyboard part,
but eventually this will include the type-a port and the pogo pins.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-4-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We put a header before modifying pinctrl nodes defined in
sc7180-trogdor.dtsi in every other file. Add one here so we know that
this section is for pinctrl modifications.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-3-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
It's simpler to reason about things if we disable nodes instead of
deleting them. Disable the second usb type-c connector node on
quackingstick instead of deleting it so that we can reason about ports
more easily.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-2-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8450 PDX223
Link: https://lore.kernel.org/r/20240605160032.150587-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
for USB only, for now. The DP ports will come at a later stage since
they use muxes.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-3-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
for USB only, for now. The DP ports will come at a later stage since
they use retimers.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-2-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Describe the port/endpoints graph between the USB/DP combo PHYs and their
corresponding DP controllers.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-1-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge the arm64-fixes-for-6.10 branch into arm64-for-6.11 to resolve the
merge conflict caused by pmic-glink and reserved-memory introduction at
the same place in the x1e80100 crd and qcp dts files.
|
|
With the SM8650-HDK, a Display Card kit can be connected to provide
a VTDR6130 display with Goodix Berlin Touch controller.
In order to route the DSI lanes to the connector for the Display
Card kit, a switch must be changed on the board.
The HDMI nodes are disabled since the DSI lanes are shared with
the DSI to HDMI transceiver.
Add support for this card as an overlay and apply it it at
build-time to the sm8650-hdk dtb.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-sm8650-upstream-hdk-v6-1-fb034fe864cc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add charger to PM660 PMIC. Readings from round-robin ADC
are needed for charger to function, so add it as well.
Signed-off-by: Aboothahir U <aboothahirpkd@gmail.com>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Link: https://lore.kernel.org/r/20240606-pm660-charger-rrdac-v1-1-a95d4da24f3b@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The actual size of the DBI region is 0xf20 and the start of the
ELBI region is 0xf40, according to the documentation. So fix them.
While at it, add the MHI region as well.
Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240604-x1e80100-dts-fixes-pcie6a-v2-1-0b4d8c6256e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The phones listed below have Richtek RT5033 PMIC and charger.
Add them to the device trees.
- Samsung Galaxy Core Prime LTE
- Samsung Galaxy Grand Prime
Cc: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240601115321.25314-4-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Some variants of Samsung Galaxy Core Prime LTE / Grand Prime LTE have a
Samsung S3FWRN5 NFC chip that works quite well with the s3fwrn5 driver
in the Linux NFC subsystem.
The clock setup for the NFC chip is a bit special (although this
seems to be a common approach used for Qualcomm devices with NFC):
The NFC chip has an output GPIO that is asserted whenever the clock
is needed to function properly. On the A3/A5 this is wired up to
PM8916 GPIO2, which is then configured with a special function
(NFC_CLK_REQ or BB_CLK2_REQ).
Enabling the rpmcc RPM_SMD_BB_CLK2_PIN clock will then instruct
PM8916 to automatically enable the clock whenever the NFC chip
requests it. The advantage is that the clock is only enabled when
needed and we don't need to manage it ourselves from the NFC driver.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240601115321.25314-3-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Samsung Galaxy Grand Prime CAN has a Samsung S3FWRN5 NFC chip that
works quite well with the s3fwrn5 driver in the Linux NFC subsystem.
The clock setup for the NFC chip is a bit special (although this
seems to be a common approach used for Qualcomm devices with NFC):
The NFC chip has an output GPIO that is asserted whenever the clock
is needed to function properly. On the A3/A5 this is wired up to
PM8916 GPIO2, which is then configured with a special function
(NFC_CLK_REQ or BB_CLK2_REQ).
Enabling the rpmcc RPM_SMD_BB_CLK2_PIN clock will then instruct
PM8916 to automatically enable the clock whenever the NFC chip
requests it. The advantage is that the clock is only enabled when
needed and we don't need to manage it ourselves from the NFC driver.
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Stephan: Put NFC pinctrl into common dtsi to share it with other variants]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Raymond: Use interrupts-extended. Keep &blsp_i2c6 enabled by default]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240601115321.25314-2-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a compatible for the HTC One (M8), which is based on the
MSM8974Pro SoC.
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240603-m8-support-v1-1-c7b6a1941ed2@me.ssier.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The CRD board doesn't have the 4th SMB2360 PMIC populated while the QCP
does. So enable it on QCP only. This fixes the warning for the missing
PMIC on CRD as well.
Fixes: 2559e61e7ef4 ("arm64: dts: qcom: x1e80100-pmics: Add the missing PMICs")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240603-x1e80100-dts-pmics-drop-4th-smb2360-from-crd-v2-1-fb63973cc07d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On SC7280, in host mode, it is observed that stressing out controller
results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instances in park mode for SC7280 to mitigate this issue.
Reported-by: Doug Anderson <dianders@google.com>
Cc: stable@vger.kernel.org
Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240604060659.1449278-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On SC7180, in host mode, it is observed that stressing out controller
results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instances in park mode for SC7180 to mitigate this issue.
Reported-by: Doug Anderson <dianders@google.com>
Cc: stable@vger.kernel.org
Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240604060659.1449278-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The L9A regulator is used to further control voltage regulators on the
board. It can be used to disable VBAT_mains, 1.8V, 3.3V, 5V rails). Make
sure that is stays always on to prevent undervolting of these volage
rails.
Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-rb2-l9a-aon-v2-1-0d493d0d107c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On the Qualcomm RB2 platform the I2C bus connected to the LT9611UXC
bridge under some circumstances can go into a state when all transfers
timeout. This causes both issues with fetching of EDID and with
updating of the bridge's firmware. While we are debugging the issue,
switch corresponding I2C bus to use i2c-gpio driver. While using
i2c-gpio no communication issues are observed.
This patch is asusmed to be a temporary fix, so it is implemented in a
non-intrusive manner to simply reverting it later.
Fixes: f7b01e07e89c ("arm64: dts: qcom: qrb4210-rb2: Enable display out")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240605-rb12-i2c2g-pio-v2-2-946f5d6b6948@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On the Qualcomm RB1 platform the I2C bus connected to the LT9611UXC
bridge under some circumstances can go into a state when all transfers
timeout. This causes both issues with fetching of EDID and with
updating of the bridge's firmware. While we are debugging the issue,
switch corresponding I2C bus to use i2c-gpio driver. While using
i2c-gpio no communication issues are observed.
This patch is asusmed to be a temporary fix, so it is implemented in a
non-intrusive manner to simply reverting it later.
Fixes: 616eda24edd4 ("arm64: dts: qcom: qrb2210-rb1: Set up HDMI")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240605-rb12-i2c2g-pio-v2-1-946f5d6b6948@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When triggering I2S SE DMA transfers on the 6th Serial Element, we get
some timeouts and finally a fatal SMMU crash because the I2C6 lines
are shared with the secure firmware in order to handle the SMB1396
charger from the secure side.
In order to make thing work flawlessly we need to allow more SIDs
while running our SE DMA transfers, thus add the 0x3 mark to allow
the 0xa0 SID to trigger while we trigger an 0xa3 SID from Linux.
This crash doesn't happen on the QRD platform since the SE6 is
configured differently, with FIFO mode disabled, thus GPI DMA
is used and we cannot exercise SE DMA on this interface.
The crash only happens when large tranfers occurs (>32 bytes) since
the driver is designed to use the SE DMA in this case, and there's
no way to mark the SE DMA as disabled or mark the GPI DMA as
preferred since the FIFO/SE DMA will be used is FIFO is not disabled.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: 01061441029e ("arm64: dts: qcom: sm8650: add support for the SM8650-HDK board")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-sm8650-upstream-hdk-iommu-fix-v1-1-9fd7233725fa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability. No changes in resulting DTBs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605154605.149051-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-7-6556c47cb501@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-6-6556c47cb501@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-5-6556c47cb501@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-4-6556c47cb501@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-3-6556c47cb501@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The INTID of EL2 non-secure physical timer is 26. In linux, the IRQ
number has a fixed 16 offset for PPIs. Therefore, the linux IRQ number
of EL2 non-secure physical timer should be 10 (26 - 16).
Fixes: 603f96d4c9d0 ("arm64: dts: qcom: add initial support for qcom sa8775p-ride")
Signed-off-by: Cong Zhang <quic_congzhan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240604085929.49227-1-quic_congzhan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Device nodes should have generic names. Use 'clock-controller@' as a GCC
node name instead of a non-generic 'gcc@'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-14-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Device nodes should have generic names. Use 'clock-controller@' as a GCC
node name instead of a non-generic 'gcc@'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-13-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On IPQ9574 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-12-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On IPQ5332 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-11-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On IPQ5018 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-10-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
