summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-08ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as modulePeter Ujfalusi
Boards supported upstream all use TWL6040 as audio codec, enable the common ASoC machine driver by default for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 SiVaibhav Hiremath
Add support for chip id detection of AM335x PG2.1 Silicon. Currently omap3xxx_check_revision() detects PG1.0 and PG2.0 only, this patch extends it by adding PG2.1 Si support. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08omap: mux: add AM/DM37x gpiosChristoph Fritz
This patch adds GPIO pins found on AM/DM37x. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08Merge branch 'omap-gpmc-fixes-for-v3.10' of git://github.com/jonhunter/linux ↵Tony Lindgren
into fixes
2013-05-08Add support for fan button on Ideapad Z580Maxim Mikityanskiy
The patch adds support for fan control button on Ideapad Z580. This is the same button as on Z570, but it raises different bit in VPCCMD_R_SPECIAL_BUTTONS. Also add message to dmesg when unknown button press detected, it will help adding support for new special buttons. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Tested-by: Ivan Vojtko <nekroman.sk@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08pvpanic: pvpanic device driverHu Tao
pvpanic device is a qemu simulated device through which guest panic event is sent to host. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. X75AAceLan Kao
BugLink: http://bugs.launchpad.net/bugs/1172151 Need to set wapf to 4 for ASUSTeK COMPUTER INC. X75A, so that user can toggle wifi function through function key correctly. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08drivers: platform: x86: Use PTR_RET functionAlexandru Gheorghiu
Used PTR_RET function instead of IS_ERR and PTR_ERR. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08sony-laptop: SVS151290S kbd backlight and gfx switch supportArthur Wirski
SVS151290S series uses handle 0x0163 for keyboard backlight and 0x015B for the graphics switch. Signed-off-by: Arthur Wirski <awirski@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08hp-wmi: add more definitions for new event_id'sAlex Hung
New HP laptops start generating new events, and hp-wmi prints unknown event_ids for them. This patch also removes these messages Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08dell-laptop: Fix krealloc() misuse in parse_da_table()David Woodhouse
If krealloc() returns NULL, it *doesn't* free the original. So any code of the form 'foo = krealloc(foo, …);' is almost certainly a bug. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08hp_accel: Ignore the error from lis3lv02d_poweron() at resumeShuah Khan
The error in lis3lv02_poweron() is harmless in the resume path, so we should ignore it. It is inline with the other usages of lis3lv02_poweron() and matches the 3.0 code for this routine. This patch is in suse git and might have missed making it into the mainline. opensuse - commit id: 66ccdac87c322cf7af12bddba8c805af640b1cff Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Shuah Khan <shuah.khan@hp.com> CC: stable@vger.kernel.org 3.8, 3.4, 3.5, 3.2 Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08dell: add new dell WMI format for the AIO machinesAceLan Kao
There is a new DELL WMI spec. with new WMI event format. I'm working on the AIO machines, but I think the new format will apply to all the Dell's machines, not only for AIO, which will be released later this year. The new format of the WMI buffer is shown as below word 0 - the number of words following in the WMI buffer(not including this word. word 1 - the event type 0x0000 - A hot key is pressed or an event occurred 0x000F - A sequence of hot keys are pressed word 2 and on - the event data Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()Wei Yongjun
Add the missing iounmap() before return from omap1_system_dma_init() in the error handling case. Also removed platform_device_del() on add resources error case which cause dup device delete. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP2+: omap_device: use late_initcall_syncKevin Hilman
If DEBUG_LL and earlyprintk are enabled, and omap-serial.c is compiled as a module, the kernel boot hangs early as the clocks for serial port are cut while earlyprintk still uses the port. The problem is a race between the late_initcall for omap_device (which idles devices that have no drivers) and the late_initcall in kernel/printk.c which turns off the earlyconsole. Any printks that happen between this omap_device late initcall and the earlyconsole late initcall will crash when accessing the UART. The fix is to ensure the omap_device initcall happens after the earlyconsole initcall. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devicesAaro Koskinen
Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver) broke the SPI display/panel driver probe on RX-51/N900. The exact cause is not fully understood, but it seems to be related to the probe order. SPI communication to the panel driver (spi1.2) fails unless the touchscreen (spi1.0) has been probed/initialized before. When the omap2-mcspi driver was converted to a platform driver, it resulted in that the devices are probed immediately after the board registers them in the order they are listed in the board file. Fix the issue by moving the touchscreen before the panel in the SPI device list. The patch fixes the following failure: [ 1.260955] acx565akm spi1.2: invalid display ID [ 1.265899] panel-acx565akm display0: acx_panel_probe panel detect error [ 1.273071] omapdss CORE error: driver probe failed: -19 Tested-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Joni Lapilainen <joni.lapilainen@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/BxRoger Quadros
On Beagle xM Rev. Ax/Bx, the USB power enable GPIO logic is reversed when compared to other revisions i.e. it is active high instead of active low. Use the beagle_config.usb_pwr_level flag correctly so that the power regulator can be configured at runtime. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - XRC transport fixes - Fix DHCP on IPoIB - mlx4 preparations for flow steering - iSER fixes - miscellaneous other fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits) IB/iser: Add support for iser CM REQ additional info IB/iser: Return error to upper layers on EAGAIN registration failures IB/iser: Move informational messages from error to info level IB/iser: Add module version mlx4_core: Expose a few helpers to fill DMFS HW strucutures mlx4_core: Directly expose fields of DMFS HW rule control segment mlx4_core: Change a few DMFS fields names to match firmare spec mlx4: Match DMFS promiscuous field names to firmware spec mlx4_core: Move DMFS HW structs to common header file IB/mlx4: Set link type for RAW PACKET QPs in the QP context IB/mlx4: Disable VLAN stripping for RAW PACKET QPs mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level RDMA/iwcm: Don't touch cmid after dropping reference IB/qib: Correct qib_verbs_register_sysfs() error handling IB/ipath: Correct ipath_verbs_register_sysfs() error handling RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled SRPT: Fix odd use of WARN_ON() IPoIB: Fix ipoib_hard_header() return value RDMA: Rename random32() to prandom_u32() RDMA/cxgb3: Fix uninitialized variable ...
2013-05-08Merge tag 'arm64-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 update from Catalin Marinas: - Since drivers/irqchip/irq-gic.c no longer has dependencies on arm32 specifics (the 'gic' branch merged), it can be enabled on arm64. - Enable arm64 support for poweroff/restart (for code under drivers/power/reset/). - Fixes (dts file, exception handling, bitops) * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Treat the bitops index argument as an 'int' arm64: Ignore the 'write' ESR flag on cache maintenance faults arm64: dts: fix #address-cells for foundation-v8 arm64: vexpress: Add support for poweroff/restart arm64: Enable support for the ARM GIC interrupt controller
2013-05-08Merge tag 'f2fs-for-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "This patch-set includes the following major enhancement patches. - introduce a new gloabl lock scheme - add tracepoints on several major functions - fix the overall cleaning process focused on victim selection - apply the block plugging to merge IOs as much as possible - enhance management of free nids and its list - enhance the readahead mode for node pages - address several cretical deadlock conditions - reduce lock_page calls The other minor bug fixes and enhancements are as follows. - calculation mistakes: overflow - bio types: READ, READA, and READ_SYNC - fix the recovery flow, data races, and null pointer errors" * tag 'f2fs-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits) f2fs: cover free_nid management with spin_lock f2fs: optimize scan_nat_page() f2fs: code cleanup for scan_nat_page() and build_free_nids() f2fs: bugfix for alloc_nid_failed() f2fs: recover when journal contains deleted files f2fs: continue to mount after failing recovery f2fs: avoid deadlock during evict after f2fs_gc f2fs: modify the number of issued pages to merge IOs f2fs: remove useless #include <linux/proc_fs.h> as we're now using sysfs as debug entry. f2fs: fix inconsistent using of NM_WOUT_THRESHOLD f2fs: check truncation of mapping after lock_page f2fs: enhance alloc_nid and build_free_nids flows f2fs: add a tracepoint on f2fs_new_inode f2fs: check nid == 0 in add_free_nid f2fs: add REQ_META about metadata requests for submit f2fs: give a chance to merge IOs by IO scheduler f2fs: avoid frequent background GC f2fs: add tracepoints to debug checkpoint request f2fs: add tracepoints for write page operations f2fs: add tracepoints to debug the block allocation ...
2013-05-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel Pull Hexagon fixes from Richard Kuo: "A bug fix and a Kconfig cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: HEXAGON: Remove non existent reference to GENERIC_KERNEL_EXECVE & GENERIC_KERNEL_THREAD Hexagon: fix register used to call do_work_pending
2013-05-08ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boardsJon Hunter
Commit ff5c9059 (ARM: dts: OMAP3+: Correct gpio #interrupts-cells property) updated the number of interrupt cells required for configuring gpios as interrupts for other devices (such as ethernet controllers). This update allowed the interrupt type (edge, level, etc) to be configured via device-tree (as described in the Documentation/devicetree/bindings/gpio/gpio-omap.txt). This broke ethernet support on the OMAP4 SDP board that defines a gpio as the ethernet IRQ because the interrupt type (level, edge, etc) was not getting configured correctly. This board use the ks8851 ethernet chip which has an active low interrupt. Fix this by defining the gpio interrupt as active-low in the device-tree binding. Please note that the OMAP4-VAR-SOM also uses the same ethernet controller and it is expected it will have the same problem. So the same fix is also applied to this board. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08mm/slab: Fix crash during slab initChris Mason
Commit 8a965b3baa89 ("mm, slab_common: Fix bootstrap creation of kmalloc caches") introduced a regression that caused us to crash early during boot. The commit was introducing ordering of slab creation, making sure two odd-sized slabs were created after specific powers of two sizes. But, if any of the power of two slabs were created earlier during boot, slabs at index 1 or 2 might not get created at all. This patch makes sure none of the slabs get skipped. Tony Lindgren bisected this down to the offending commit, which really helped because bisect kept bringing me to almost but not quite this one. Signed-off-by: Chris Mason <chris.mason@fusionio.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08NFS4.1 Fix data server connection raceAndy Adamson
Unlike meta data server mounts which support multiple mount points to the same server via struct nfs_server, data servers support a single connection. Concurrent calls to setup the data server connection can race where the first call allocates the nfs_client struct, and before the cache struct nfs_client pointer can be set, a second call also tries to setup the connection, finds the already allocated nfs_client, bumps the reference count, re-initializes the session,etc. This results in a hanging data server session after umount. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-08Merge branches 'cxgb4', 'ipoib', 'iser', 'misc', 'mlx4', 'qib' and 'srp' ↵Roland Dreier
into for-next
2013-05-08if_cablemodem.h: Add parenthesis around ioctl macrosJosh Boyer
Protect the SIOCGCM* ioctl macros with parenthesis. Reported-by: Paul Wouters <pwouters@redhat.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()Pravin B Shelar
Rather than having logic to calculate inner protocol in every tunnel gso handler move it to gso code. This simplifies code. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Cong Wang <amwang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08net: fec: fix kernel oops when plug/unplug cable many timesFrank Li
reproduce steps 1. flood ping from other machine ping -f -s 41000 IP 2. run below script while [ 1 ]; do ethtool -s eth0 autoneg off; sleep 3;ethtool -s eth0 autoneg on; sleep 4; done; You can see oops in one hour. The reason is fec_restart clear BD but NAPI may use it. The solution is disable NAPI and stop xmit when reset BD. disable NAPI may sleep, so fec_restart can't be call in atomic context. Signed-off-by: Frank Li <Frank.Li@freescale.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08bfin_mac: fix error return code in bfin_mac_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08sfc: fix return value check in efx_ptp_probe_channel()Wei Yongjun
In case of error, the function ptp_clock_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08net/spider_net: fix error return code in spider_net_open()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08net/irda: fix error return code in bfin_sir_open()Wei Yongjun
Fix to return -ENOMEM in the irlap_open() error handling case instead of 0(overwrite to 0 by bfin_sir_startup()), as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08net: of_mdio: fix behavior on missing phy deviceSebastian Hesselbarth
of_mdiobus_register creates a phy_device even if get_phy_device failed to create it previously. This causes indefinite polling on non-existent PHYs. This fix makes of_mdio_register rely on get_phy_device to properly create the device or fail otherwise. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08sierra_net: keep status interrupt URB activeDan Williams
The driver and firmware sync up through SYNC messages, and the firmware's affirmative reply to these SYNC messages appears to be the "Reset" indication received via the status interrupt endpoint. Thus the driver needs the status interrupt endpoint always active so that the Reset indication can be received even if the netdev is closed, which is the case right after device insertion. If the Reset indication is not received by the driver, it continues sending SYNC messages to the firmware, which crashes about 10 seconds later and the device stops responding. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08usbnet: allow status interrupt URB to always be activeDan Williams
Some drivers (sierra_net) need the status interrupt URB active even when the device is closed, because they receive custom indications from firmware. Add functions to refcount the status interrupt URB submit/kill operation so that sub-drivers and the generic driver don't fight over whether the status interrupt URB is active or not. A sub-driver can call usbnet_status_start() at any time, but the URB is only submitted the first time the function is called. Likewise, when the sub-driver is done with the URB, it calls usbnet_status_stop() but the URB is only killed when all users have stopped it. The URB is still killed and re-submitted for suspend/resume, as before, with the same refcount it had at suspend. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN cardDan Williams
A rebranded Novatel E371 for AT&T's LTE bands. qmi_wwan should drive this device, while cdc_ether should ignore it. Even though the USB descriptors are plain CDC-ETHER that USB interface is a QMI interface. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08be2net: disable TX in be_close()Sathya Perla
be_close() followed by be_clear() is called as a part of cleanup in the EEH/AER flow. This patch stops TX in be_close() before cleaning/freeing up the TX queues in be_clear(). This prevents be_xmit() from being called while TX queues no longer exist. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08be2net: fix EQ from getting full while cleaning RX CQSathya Perla
While cleaning RX queues, the CQ DB may be rung several times (with rearm) while waiting for the flush compl. Each CQ-notify with rearm can result in an event. The EQ may get full resulting in a HW error. Fix this by not re-arming the CQ while notifying a valid completion. Also, there's no need to wait for 1ms after destroying RXQ, as the code in be_rx_cq_clean() waits for the flush compl to arrive. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08be2net: fix payload_len value for GET_MAC_LIST cmd reqSathya Perla
The buffer size for a FW cmd request must be big enough to fit the response, else the cmd fails. For GET_MAC_LIST cmd, though the memory allocated for the cmd is big enough to fit the response, the payload_len value in the WRB hdr is being set to the request length only. Fix this for GET_MAC_LIST cmd. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08be2net: provision VF resources before enabling SR-IOVSathya Perla
When the PF driver calls pci_enable_sriov(), the VFs may be probed inline before the call returns. So, the resources required for all VFs must be provisioned by the PF driver *before* calling pci_enable_sriov(); else, VF probe will fail. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "It might look big in volume, but when categorized, not a lot of drivers are touched. The pull request contains: - mtip32xx fixes from Micron. - A slew of drbd updates, this time in a nicer series. - bcache, a flash/ssd caching framework from Kent. - Fixes for cciss" * 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits) bcache: Use bd_link_disk_holder() bcache: Allocator cleanup/fixes cciss: bug fix to prevent cciss from loading in kdump crash kernel cciss: add cciss_allow_hpsa module parameter drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions mtip32xx: Workaround for unaligned writes bcache: Make sure blocksize isn't smaller than device blocksize bcache: Fix merge_bvec_fn usage for when it modifies the bvm bcache: Correctly check against BIO_MAX_PAGES bcache: Hack around stuff that clones up to bi_max_vecs bcache: Set ra_pages based on backing device's ra_pages bcache: Take data offset from the bdev superblock. mtip32xx: mtip32xx: Disable TRIM support mtip32xx: fix a smatch warning bcache: Disable broken btree fuzz tester bcache: Fix a format string overflow bcache: Fix a minor memory leak on device teardown bcache: Documentation updates bcache: Use WARN_ONCE() instead of __WARN() bcache: Add missing #include <linux/prefetch.h> ...
2013-05-08rtc: rtc-tile: add missing platform_device_unregister() when module exitWei Yongjun
We have registered platform device when module init, and need unregister it when module exit. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-05-08pstore/ram: fix error return code in ramoops_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-08NVMe: Simplify Firmware Activate code slightlyMatthew Wilcox
Add definitions for the three Firmware Activate actions, and change the SCSI translation code to construct the command into a temporary variable instead of translating the endianness back-and-forth. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@linux.intel.com>
2013-05-08NVMe: Only clear the enable bit when disabling controllerMatthew Wilcox
Many of the bits in the Controller Configuration register may only be modified when the Enable bit is clear. Clearing them at the same time as the Enable bit might be OK, but let's play it safe and only touch the Enable bit. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2013-05-08NVMe: Wait for device to acknowledge shutdownMatthew Wilcox
A recent update to the specification makes it clear that the host is expected to wait for the device to acknowledge the Enable bit transitioning to 0 as well as waiting for the device to acknowledge a transition to 1. Reported-by: Khosrow Panah <Khosrow.Panah@idt.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2013-05-08ALSA: Add comment for control TLV APIDavid Henningsson
Userspace is not meant to have to handle all strange dB ranges, so add a specification comment. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-08ACPICA: ACPICA: Fix for _INI regressionTomasz Nowicki
This change fixes a problem introduced by recent commit c34c82b (ACPICA: Predefine names: Add allowed argument types to master info table) in 20130328 where _INI methods are no longer executed properly because of a memory block that is not initialized properly. ACPICA BZ1016. Tomasz Nowicki <tomasz.nowicki@linaro.org> References: https://bugs.acpica.org/show_bug.cgi?id=1016 Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-08ACPICA: _OSI support: Fix possible memory leakJung-uk Kim
Fixes a possible memory leak in the error exit path introduced by recent commit 388a990 ("ACPICA: _OSI Support: handle any errors from acpi_os_acquire_mutex()"). [rjw: Changelog] Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-07-16 12:16:28 +0000