summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-30tipc: move link synch and failover to link aggregation levelJon Paul Maloy
Link failover and synchronization have until now been handled by the links themselves, forcing them to have knowledge about and to access parallel links in order to make the two algorithms work correctly. In this commit, we move the control part of this functionality to the link aggregation level in node.c, which is the right location for this. As a result, the two algorithms become easier to follow, and the link implementation becomes simpler. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30tipc: extend node FSMJon Paul Maloy
In the next commit, we will move link synch/failover orchestration to the link aggregation level. In order to do this, we first need to extend the node FSM with two more states, NODE_SYNCHING and NODE_FAILINGOVER, plus four new events to enter and leave those states. This commit introduces this change, without yet making use of it. The node FSM now looks as follows: +-----------------------------------------+ | PEER_DOWN_EVT| | | +------------------------+----------------+ | |SELF_DOWN_EVT | | | | | | | | +-----------+ +-----------+ | | |NODE_ | |NODE_ | | | +----------|FAILINGOVER|<---------|SYNCHING |------------+ | | |SELF_ +-----------+ FAILOVER_+-----------+ PEER_ | | | |DOWN_EVT | A BEGIN_EVT A | DOWN_EVT| | | | | | | | | | | | | | | | | | | | |FAILOVER_|FAILOVER_ |SYNCH_ |SYNCH_ | | | | |END_EVT |BEGIN_EVT |BEGIN_EVT|END_EVT | | | | | | | | | | | | | | | | | | | | | +--------------+ | | | | | +------->| SELF_UP_ |<-------+ | | | | +----------------| PEER_UP |------------------+ | | | | |SELF_DOWN_EVT +--------------+ PEER_DOWN_EVT| | | | | | A A | | | | | | | | | | | | | | PEER_UP_EVT| |SELF_UP_EVT | | | | | | | | | | | V V V | | V V V +------------+ +-----------+ +-----------+ +------------+ |SELF_DOWN_ | |SELF_UP_ | |PEER_UP_ | |PEER_DOWN | |PEER_LEAVING|<------|PEER_COMING| |SELF_COMING|------>|SELF_LEAVING| +------------+ SELF_ +-----------+ +-----------+ PEER_ +------------+ | DOWN_EVT A A DOWN_EVT | | | | | | | | | | SELF_UP_EVT| |PEER_UP_EVT | | | | | | | | | |PEER_DOWN_EVT +--------------+ SELF_DOWN_EVT| +------------------->| SELF_DOWN_ |<--------------------+ | PEER_DOWN | +--------------+ Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30tipc: reverse call order for link_reset()->node_link_down()Jon Paul Maloy
In many cases the call order when a link is reset goes as follows: tipc_node_xx()->tipc_link_reset()->tipc_node_link_down() This is not the right order if we want the node to be in control, so in this commit we change the order to: tipc_node_xx()->tipc_node_link_down()->tipc_link_reset() The fact that tipc_link_reset() now is called from only one location with a well-defined state will also facilitate later simplifications of tipc_link_reset() and the link FSM. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30tipc: move all link_reset() calls to link aggregation levelJon Paul Maloy
In line with our effort to let the node level have full control over its links, we want to move all link reset calls from link.c to node.c. Some of the calls can be moved by simply moving the calling function, when this is the right thing to do. For the remaining calls we use the now established technique of returning a TIPC_LINK_DOWN_EVT flag from tipc_link_rcv(), whereafter we perform the reset call when the call returns. This change serves as a preparation for the coming commits. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30tipc: eliminate function tipc_link_activate()Jon Paul Maloy
The function tipc_link_activate() is redundant, since it mostly performs settings that have already been done in a preceding tipc_link_reset(). There are three exceptions to this: - The actual state change to TIPC_LINK_WORKING. This should anyway be done in the FSM, and not in a separate function. - Registration of the link with the bearer. This should be done by the node, since we don't want the link to have any knowledge about its specific bearer. - Call to tipc_node_link_up() for user access registration. With the new role distribution between link aggregation and link level this becomes the wrong call order; tipc_node_link_up() should instead be called directly as a result of a TIPC_LINK_UP event, hence by the node itself. This commit implements those changes. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-07-30 Here's a set of Bluetooth & 802.15.4 patches intended for the 4.3 kernel. - Cleanups & fixes to mac802154 - Refactoring of Intel Bluetooth HCI driver - Various coding style fixes to Bluetooth HCI drivers - Support for Intel Lightning Peak Bluetooth devices - Generic class code in interface descriptor in btusb to match more HW - Refactoring of Bluetooth HS code together with a new config option - Support for BCM4330B1 Broadcom UART controller Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: sk_clone_lock() should only do get_net() if the parent is not a kernel ↵Sowmini Varadhan
socket The newsk returned by sk_clone_lock should hold a get_net() reference if, and only if, the parent is not a kernel socket (making this similar to sk_alloc()). E.g,. for the SYN_RECV path, tcp_v4_syn_recv_sock->..inet_csk_clone_lock sets up the syn_recv newsk from sk_clone_lock. When the parent (listen) socket is a kernel socket (defined in sk_alloc() as having sk_net_refcnt == 0), then the newsk should also have a 0 sk_net_refcnt and should not hold a get_net() reference. Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Acked-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net/ipv6: add sysctl option accept_ra_min_hop_limitHangbin Liu
Commit 6fd99094de2b ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: sched: fix refcount imbalance in actionsDaniel Borkmann
Since commit 55334a5db5cd ("net_sched: act: refuse to remove bound action outside"), we end up with a wrong reference count for a tc action. Test case 1: FOO="1,6 0 0 4294967295," BAR="1,6 0 0 4294967294," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 \ action bpf bytecode "$FOO" tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 1 bind 1 tc actions replace action bpf bytecode "$BAR" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 1 ref 2 bind 1 tc actions replace action bpf bytecode "$FOO" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 3 bind 1 Test case 2: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 2 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 3 bind 1 What happens is that in tcf_hash_check(), we check tcf_common for a given index and increase tcfc_refcnt and conditionally tcfc_bindcnt when we've found an existing action. Now there are the following cases: 1) We do a late binding of an action. In that case, we leave the tcfc_refcnt/tcfc_bindcnt increased and are done with the ->init() handler. This is correctly handeled. 2) We replace the given action, or we try to add one without replacing and find out that the action at a specific index already exists (thus, we go out with error in that case). In case of 2), we have to undo the reference count increase from tcf_hash_check() in the tcf_hash_check() function. Currently, we fail to do so because of the 'tcfc_bindcnt > 0' check which bails out early with an -EPERM error. Now, while commit 55334a5db5cd prevents 'tc actions del action ...' on an already classifier-bound action to drop the reference count (which could then become negative, wrap around etc), this restriction only accounts for invocations outside a specific action's ->init() handler. One possible solution would be to add a flag thus we possibly trigger the -EPERM ony in situations where it is indeed relevant. After the patch, above test cases have correct reference count again. Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: phy: spi_ks8995: clean up ks8995_registers_read/writeVladimir Zapolskiy
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30Merge branch 'r8152-fixes'David S. Miller
Hayes Wang says: ==================== r8152: device reset v3: For patch #2, remove cancel_delayed_work(). v2: For patch #1, remove usb_autopm_get_interface(), usb_autopm_put_interface(), and the checking of intf->condition. For patch #2, replace the original method with usb_queue_reset_device() to reset the device. v1: Although the driver works normally, we find the device may get all 0xff data when transmitting packets on certain platforms. It would break the device and no packet could be transmitted. The reset is necessary to recover the hw for this situation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30r8152: reset device when tx timeouthayeswang
The device reset is necessary if the hw becomes abnormal and stops transmitting packets. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30r8152: add pre_reset and post_resethayeswang
Add rtl8152_pre_reset() and rtl8152_post_reset() which are used when calling usb_reset_device(). The two functions could reduce the time of reset when calling usb_reset_device() after probe(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30ALSA: hda - Fix MacBook Pro 5,2 quirkTakashi Iwai
MacBook Pro 5,2 with ALC889 codec had already a fixup entry, but this seems not working correctly, a fix for pin NID 0x15 is needed in addition. It's equivalent with the fixup for MacBook Air 1,1, so use this instead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102131 Reported-and-tested-by: Jeffery Miller <jefferym@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-07-30Merge branch 'bpf-next'David S. Miller
Daniel Borkmann says: ==================== Minor BPF updates Various minor misc updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30bpf: also show process name/pid in bpf_jit_dumpDaniel Borkmann
It can be useful for testing to see the actual process/pid who is loading a given filter. I was running some BPF test program and noticed unusual filter loads from time to time, triggered by some other application in the background. bpf_jit_disasm is still working after this change. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30bpf, x86/sparc: show actual number of passes in bpf_jit_dumpDaniel Borkmann
When bpf_jit_compile() got split into two functions via commit f3c2af7ba17a ("net: filter: x86: split bpf_jit_compile()"), bpf_jit_dump() was changed to always show 0 as number of compiler passes. Change it to dump the actual number. Also on sparc, we count passes starting from 0, so add 1 for the debug dump as well. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30bpf: provide helper that indicates eBPF was migratedDaniel Borkmann
During recent discussions we had with Michael, we found that it would be useful to have an indicator that tells the JIT that an eBPF program had been migrated from classic instructions into eBPF instructions, as only in that case A and X need to be cleared in the prologue. Such eBPF programs do not set a particular type, but all have BPF_PROG_TYPE_UNSPEC. Thus, introduce a small helper for cde66c2d88da ("s390/bpf: Only clear A and X for converted BPF programs") and possibly others in future. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30test_bpf: assign type to native eBPF test casesDaniel Borkmann
As JITs start to perform optimizations whether to clear A and X on eBPF programs in the prologue, we should actually assign a program type to the native eBPF test cases. It doesn't really matter which program type, as these instructions don't go through the verifier, but it needs to be a type != BPF_PROG_TYPE_UNSPEC. This reflects eBPF programs loaded via bpf(2) system call (!= type unspec) vs. classic BPF to eBPF migrations (== type unspec). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "The main change is support for keyboards and touchpads found in 2015 editions of Macbooks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: zforce - don't overwrite the stack" Input: bcm5974 - add support for the 2015 Macbook Pro HID: apple: Add support for the 2015 Macbook Pro Input: bcm5974 - prepare for a new trackpad generation Input: synaptics - dump ext10 capabilities as well
2015-07-30bnx2x: Fix compilation when CONFIG_BNX2X_SRIOV is not setYuval Mintz
Commit 05cc5a39ddb7 ("bnx2x: add vlan filtering offload") has broken compilation when CONFIG_BNX2X_SRIOV is not set. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30Merge tag 'hwmon-for-linus-v4.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two patches headed for -stable. nct7802: Fix integer overflow seen when writing voltage limits nct7904: Rename pwm attributes to match hwmon ABI" * tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct7802) Fix integer overflow seen when writing voltage limits hwmon: (nct7904) Rename pwm attributes to match hwmon ABI
2015-07-30drm/i915: Declare the swizzling unknown for L-shaped configurationsChris Wilson
The old style of memory interleaving swizzled upto the end of the first even bank of memory, and then used the remainder as unswizzled on the unpaired bank - i.e. swizzling is not constant for all memory. This causes problems when we try to migrate memory and so the kernel prevents migration at all when we detect L-shaped inconsistent swizzling. However, this issue also extends to userspace who try to manually detile into memory as the swizzling for an individual page is unknown (it depends on its physical address only known to the kernel), userspace cannot correctly swizzle. Note that this is a new attempt for the previously merged one, reverted in commit d82c0ba6e306f079407f07003e53c262d683397b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 14 12:29:27 2015 +0200 Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations" This is cc: stable since we need it to fix up troubles with wc cpu mmaps that userspace recently started to use widely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org [danvet: Add note about previous (failed attempt).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-30drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgttChris Wilson
If the device does not support the aliasing ppgtt, we must translate user bind requests (PIN_USER) from LOCAL_BIND to a GLOBAL_BIND. However, since this is device specific we cannot do this conveniently in the upper layers and so must manage the vma->bound flags in the backend. Partial revert of commit 75d04a3773ecee617847de963ae4195d6aa74c28 [4.2-rc1] Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound Note this was spotted by Daniel originally, but we dropped the ball in getting the fix in before the bug going wild. Sorry all. Reported-by: Vincent Legoll vincent.legoll@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91133 References: https://bugs.freedesktop.org/show_bug.cgi?id=90224 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-30Bluetooth: 6lowpan: Fix possible raceAlexander Aring
This patch fix a possible race after calling register_netdev. After calling netdev_register it could be possible that netdev_ops callbacks use the uninitialized private data of lowpan_dev. By moving the initialization of this data before netdev_register we can be sure that initialized private data is be used after netdev_register. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30mac802154: Fix memory corruption with global deferred transmit state.Lennert Buytenhek
When transmitting a packet via a mac802154 driver that can sleep in its transmit function, mac802154 defers the call to the driver's transmit function to a per-device workqueue. However, mac802154 uses a single global work_struct for this, which means that if you have more than one registered mac802154 interface in the system, and you transmit on more than one of them at the same time, you'll very easily cause memory corruption. This patch moves the deferred transmit processing state from global variables to struct ieee802154_local, and this seems to fix the memory corruption issue. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30at86rf230: remove hrtimer on 1 usec delayAlexander Aring
According Documentation/timers/timers-howto.txt the usually case for setting up a hrtimer takes > ~10us. So we should use udelay in this case so we are sure that the state change was done, before doing the state change assert. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: cmtp: Do not use list_for_each_safe when not neededChristophe JAILLET
There is no need to use the safe version of list_for_each here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: btusb: match generic class code in interface descriptorDaniel Drake
btusb currently has a generic match on USB device descriptors: { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, However, http://www.usb.org/developers/defined_class states: Base Class E0h (Wireless Controller) This base class is defined for devices that are Wireless controllers. Values not shown in the table below are reserved. These class codes are to be used in Interface Descriptors, with the exception of the Bluetooth class code which can also be used in a Device Descriptor. Add a match on the interface descriptors accordingly. This fixes compatibility with the RTL8723AU device shown below. This device conforms to the USB Interface Association Descriptor specification, which requires the device to have class ef/02/01. The extra IAD descriptor then specifies that interfaces 0 and 1 belong to the same function/driver, which is true. Provided that the Bluetooth device class spec accepts use of the IAD, I imagine that technically, all btusb devices should be configured like this. T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=0724 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723au E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: Move create/accept phy link completed callback to amp.cArron Wang
To avoid amp module hooks from hci_event.c Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: Move amp assoc read/write completed callback to amp.cArron Wang
To avoid amp module hooks from hci_event.c Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: Move get info completed callback to a2mp.cArron Wang
To avoid a2mp module hooks from hci_event.c and send getinfo response operation only required by a2mp module, we can move this callback to a2mp.c Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: Move high speed specific event under BT_HS optionArron Wang
Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: Add BT_HS config optionArron Wang
Move A2MP Module under BT_HS config option and allow the user have flexible option to choose the feature only they need a2mp_discover_amp() & a2mp_channel_create() are a2mp module entry point for master and slave, and this is dynamic invoked depends on the userspace or remote request, then we defined their implementation depends on BT_HS config Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: btbcm: Add BCM4330B1 UART deviceFrederic Danis
Add "waiting for configuration" address. Add lmp_subver and firmware name for BCM4330B1 controller. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30iommu/amd: Set global dma_ops if swiotlb is disabledJoerg Roedel
Some AMD systems also have non-PCI devices which can do DMA. Those can't be handled by the AMD IOMMU, as the hardware can only handle PCI. These devices would end up with no dma_ops, as neither the per-device nor the global dma_ops will get set. SWIOTLB provides global dma_ops when it is active, so make sure there are global dma_ops too when swiotlb is disabled. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-07-30iommu/amd: Use swiotlb in passthrough modeJoerg Roedel
In passthrough mode (iommu=pt) all devices are identity mapped. If a device does not support 64bit DMA it might still need remapping. Make sure swiotlb is initialized to provide this remapping. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-07-30iommu/amd: Allow non-IOMMUv2 devices in IOMMUv2 domainsJoerg Roedel
Since devices with IOMMUv2 functionality might be in the same group as devices without it, allow those devices in IOMMUv2 domains too. Otherwise attaching the group with the IOMMUv2 device to the domain will fail. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-07-30iommu/amd: Use iommu core for passthrough modeJoerg Roedel
Remove the AMD IOMMU driver implementation for passthrough mode and rely on the new iommu core features for that. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-07-30iommu/amd: Use iommu_attach_group()Joerg Roedel
Since the conversion to default domains the iommu_attach_device function only works for devices with their own group. But this isn't always true for current IOMMUv2 capable devices, so use iommu_attach_group instead. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-07-30Merge branch 'mlxsw'David S. Miller
Jiri Pirko says: ==================== Introduce Mellanox Technologies Switch ASICs switchdev drivers This patchset introduces Mellanox Technologies Switch driver infrastructure and support for SwitchX-2 ASIC. The driver is divided into 3 logical parts: 1) Bus - implements switch bus interface. Currently only PCI bus is implemented, but more buses will be added in the future. Namely I2C and SGMII. (patch #2) 2) Driver - implemements of ASIC-specific functions. Currently SwitchX-2 ASIC is supported, but a plan exists to introduce support for Spectrum ASIC in the near future. (patch #4) 3) Core - infrastructure that glues buses and drivers together. It implements register access logic (EMADs) and takes care of RX traps and events. (patch #1 and #3) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30mlxsw: Introduce Mellanox SwitchX-2 ASIC supportJiri Pirko
Benefit from the previously introduced Mellanox Switch infrastructure and add driver for SwitchX-2 ASIC. Note that this driver is very simple now. It implements bare minimum for getting device to work on slow-path. Fast-path offload functionality is going to be added soon. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30mlxsw: Add interface to access registers and process eventsIdo Schimmel
Ethernet Management Datagrams (EMADs) are Ethernet packets sent between the host and the device in order to configure the available device registers. Another use case is notifications sent from the device to the host, letting it know about certain events, such as port up / down. Add the ability to construct EMADs with provisions to construct and parse the registers' payloads. Implement EMAD transaction layer which is responsible for the reliable transmission of EMADs. Also, add an infrastructure used by the switch driver to register for particular events generated by the device. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30mlxsw: Add PCI bus implementationJiri Pirko
Add PCI bus implementation for Mellanox Technologies Switch ASICs. This includes firmware initialization, async queues manipulation and command interface implementation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30mlxsw: Introduce Mellanox switch driver coreJiri Pirko
Add core components of Mellanox switch driver infrastructure. Core infrastructure is designed so that it can be used by multiple bus drivers (PCI now, I2C and SGMII are planned to be implemented in the future). Multiple switch kind drivers can be registered as well. This core serves as a glue between buses and drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29qlcnic: Fix corruption while copyingShahed Shaikh
Use proper typecasting while performing byte-by-byte copy Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29act_bpf: fix memory leaks when replacing bpf programsDaniel Borkmann
We currently trigger multiple memory leaks when replacing bpf actions, besides others: comm "tc", pid 1909, jiffies 4294851310 (age 1602.796s) hex dump (first 32 bytes): 01 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 ................ 18 b0 98 6d 00 88 ff ff 00 00 00 00 00 00 00 00 ...m............ backtrace: [<ffffffff817e623e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8120a22d>] __vmalloc_node_range+0x1bd/0x2c0 [<ffffffff8120a37a>] __vmalloc+0x4a/0x50 [<ffffffff811a8d0a>] bpf_prog_alloc+0x3a/0xa0 [<ffffffff816c0684>] bpf_prog_create+0x44/0xa0 [<ffffffffa09ba4eb>] tcf_bpf_init+0x28b/0x3c0 [act_bpf] [<ffffffff816d7001>] tcf_action_init_1+0x191/0x1b0 [<ffffffff816d70a2>] tcf_action_init+0x82/0xf0 [<ffffffff816d4d12>] tcf_exts_validate+0xb2/0xc0 [<ffffffffa09b5838>] cls_bpf_modify_existing+0x98/0x340 [cls_bpf] [<ffffffffa09b5cd6>] cls_bpf_change+0x1a6/0x274 [cls_bpf] [<ffffffff816d56e5>] tc_ctl_tfilter+0x335/0x910 [<ffffffff816b9145>] rtnetlink_rcv_msg+0x95/0x240 [<ffffffff816df34f>] netlink_rcv_skb+0xaf/0xc0 [<ffffffff816b909e>] rtnetlink_rcv+0x2e/0x40 [<ffffffff816deaaf>] netlink_unicast+0xef/0x1b0 Issue is that the old content from tcf_bpf is allocated and needs to be released when we replace it. We seem to do that since the beginning of act_bpf on the filter and insns, later on the name as well. Example test case, after patch: # FOO="1,6 0 0 4294967295," # BAR="1,6 0 0 4294967294," # tc actions add action bpf bytecode "$FOO" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 2 ref 1 bind 0 # tc actions replace action bpf bytecode "$BAR" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 2 ref 1 bind 0 # tc actions replace action bpf bytecode "$FOO" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 2 ref 1 bind 0 # tc actions del action bpf index 2 [...] # echo "scan" > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak | grep "comm \"tc\"" | wc -l 0 Fixes: d23b8ad8ab23 ("tc: add BPF based action") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29be2net: Support vxlan offload stats in the driverSriharsha Basavapatna
This patch adds vxlan offload specific counters to ethtool stats. We provide tx/rx queue counters to show the number of vxlan offload pkts sent/received. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29Merge branch 'thunderx-fixes'David S. Miller
Aleksey Makarov says: ==================== net: thunderx: Misc fixes Miscellaneous fixes for the ThunderX VNIC driver All the patches can be applied individually. It's ok to drop some if the maintainer feels uncomfortable with applying for 4.2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: thunderx: Fix for crash while BGX teardownThanneeru Srinivasulu
Cortina phy does not have kernel driver and we don't attach device with phy layer for intefaces like XFI, XLAUI etc, Hence check for interface type before calling disconnect. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-15 16:38:59 +0000