summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-04USB: zte_ev: fix broken openJohan Hovold
Remove bogus port-number check in open and close, which prevented this driver from being used with a minor number different from zero. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04Input: wacom - fix a typo for Cintiq 22HDTPing Cheng
And make the lines easier to read. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-04Input: synaptics - fix sync lost after resume on some laptopsEric Miao
In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: Daniel Manrique <daniel.manrique@canonical.com> Signed-off-by: James M Leddy <james.leddy@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-04Merge tag 'regulator-v3.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few small fixes for v3.10, documentation things in the core and a few driver bugs." * tag 'regulator-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10 regulator: palmas: Fix incorrect condition regulator: core: Correct spelling mistake in comment regulator: dbx500: Make local symbol static regulator: Fix kernel-doc generation warnings.
2013-06-04Merge tag 'jfs-3.10-rc5' of git://github.com/kleikamp/linux-shaggyLinus Torvalds
Pull jfs bugfixes from David Kleikamp: "A couple jfs bug fixes for 3.10-rc5" * tag 'jfs-3.10-rc5' of git://github.com/kleikamp/linux-shaggy: fs/jfs: Add check if journaling to disk has been disabled in lbmRead() jfs: Several bugs in jfs_freeze() and jfs_unfreeze()
2013-06-03staging: alarm-dev: information leak in alarm_ioctl()Dan Carpenter
Smatch complains that if we pass an invalid clock type then "ts" is never set. We need to check for errors earlier, otherwise we end up passing uninitialized stack data to userspace. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03USB: serial: Add Option GTM681W to qcserial device table.Richard Weinberger
The Option GTM681W uses a qualcomm chip and can be served by the qcserial device driver. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03USB: Serial: cypress_M8: Enable FRWD Dongle hidcom deviceRobert Butora
The patch adds a new HIDCOM device and does not affect other devices driven by the cypress_M8 module. Changes are: - add VendorID ProductID to device tables - skip unstable speed check because FRWD uses 115200bps - skip reset at probe which is an issue workaround for this particular device. Signed-off-by: Robert Butora <robert.butora.fi@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly"Kyle McMartin
This reverts commit cfcec52e9781f08948c6eb98198d65c45be75a70. This regresses a longstanding behaviour on X86 systems, which end up with PCI serial ports moving between ttyS4 and ttyS0 when you bisect to opposite sides of this commit, resulting in the need to constantly modify the console setting in order to bisect across it. Please revert, we can work on solving this for ARM platforms in a less disruptive way. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Karthik Manamcheri <karthik.manamcheri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03serial: samsung: enable clock before clearing pending interrupts during initChander Kashyap
Ensure that the uart controller clock is enabled prior to writing to the interrupt mask and pending registers in the s3c24xx_serial_init_port function. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03serial/imx: disable hardware flow control at startupLucas Stach
We only want to enable hardware flow control if RTS/CTS pins are connected. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03GFS2: Don't cache iopen glocksBob Peterson
This patch makes GFS2 immediately reclaim/delete all iopen glocks as soon as they're dequeued. This allows deleters to get an EXclusive lock on iopen so files are deleted properly instead of being set as unlinked. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-06-03GFS2: Fall back to vmalloc if kmalloc fails for dir hash tablesBob Peterson
This version has one more correction: the vmalloc calls are replaced by __vmalloc calls to preserve the GFP_NOFS flag. When GFS2's directory management code allocates buffers for a directory hash table, if it can't get the memory it needs, it currently gives a bad return code. Rather than giving an error, this patch allows it to use virtual memory rather than kernel memory for the hash table. This should make it possible for directories to function properly, even when kernel memory becomes very fragmented. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-06-03GFS2: Increase i_writecount during gfs2_setattr_sizeBob Peterson
This patch calls get_write_access in a few functions. This merely increases inode->i_writecount for the duration of the function. That will ensure that any file closes won't delete the inode's multi-block reservation while the function is running. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-06-03GFS2: Set log descriptor type for jdata blocksBob Peterson
This patch sets the log descriptor type according to whether the journal commit is for (journaled) data or metadata. This was recently broken when the functions to process data and metadata log ops were combined. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-06-03fuse: fix alignment in short read optimization for async_dioMaxim Patlasov
The bug was introduced with async_dio feature: trying to optimize short reads, we cut number-of-bytes-to-read to i_size boundary. Hence the following example: truncate --size=300 /mnt/file dd if=/mnt/file of=/dev/null iflag=direct led to FUSE_READ request of 300 bytes size. This turned out to be problem for userspace fuse implementations who rely on assumption that kernel fuse does not change alignment of request from client FS. The patch turns off the optimization if async_dio is disabled. And, if it's enabled, the patch fixes adjustment of number-of-bytes-to-read to preserve alignment. Note, that we cannot throw out short read optimization entirely because otherwise a direct read of a huge size issued on a tiny file would generate a huge amount of fuse requests and most of them would be ACKed by userspace with zero bytes read. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-06-03fuse: return -EIOCBQUEUED from fuse_direct_IO() for all async requestsBrian Foster
If request submission fails for an async request (i.e., get_user_pages() returns -ERESTARTSYS), we currently skip the -EIOCBQUEUED return and drop into wait_for_sync_kiocb() forever. Avoid this by always returning -EIOCBQUEUED for async requests. If an error occurs, the error is passed into fuse_aio_complete(), returned via aio_complete() and thus propagated to userspace via io_getevents(). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-06-03fuse: fix readdirplus Oops in fuse_dentry_revalidateMiklos Szeredi
Fix bug introduced by commit 4582a4ab2a "FUSE: Adapt readdirplus to application usage patterns". We need to check for a positive dentry; negative dentries are not added by readdirplus. Secondly we need to advise the use of readdirplus on the *parent*, otherwise the whole thing is useless. Thirdly all this is only relevant if "readdirplus_auto" mode is selected by the filesystem. We advise the use of readdirplus only if the dentry was still valid. If we had to redo the lookup then there was no use in doing the -plus version. Reported-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Feng Shuo <steve.shuo.feng@gmail.com> CC: stable@vger.kernel.org
2013-06-03net: can: peak_usb: Do not do dma on the stackMarc Kleine-Budde
smatch reports the following warnings: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:514 pcan_usb_pro_drv_loaded() error: doing dma on the stack (buffer) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:878 pcan_usb_pro_init() error: doing dma on the stack (&fi) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:889 pcan_usb_pro_init() error: doing dma on the stack (&bi) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Cc: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-06-03net: can: esd_usb2: Do not do dma on the stackOlivier Sobrie
smatch reports the following warnings: drivers/net/can/usb/esd_usb2.c:640 esd_usb2_start() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:846 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:855 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:923 esd_usb2_set_bittiming() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1047 esd_usb2_probe() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1053 esd_usb2_probe() error: doing dma on the stack (&msg) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Cc: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-06-03net: can: kvaser_usb: fix reception on "USBcan Pro" and "USBcan R" type ↵Jonas Peterson
hardware. Unlike Kvaser Leaf light devices, some other Kvaser devices (like USBcan Pro, USBcan R) receive CAN messages in CMD_LOG_MESSAGE frames. This patch adds support for it. Cc: linux-stable <stable@vger.kernel.org> # >= v3.8 Signed-off-by: Jonas Peterson <jonas.peterson@gmail.com> Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-06-03microblaze: Use static inline functions in cacheflush.hMichal Simek
Using static inline functions ensure proper type checking which also remove compilation warning for no MMU Compilation warning: arch/microblaze/include/asm/cacheflush.h: warning: 'addr' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "A boot lock-up on Mac, also destined for stable" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK
2013-06-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Recent bug fixes, one of them touches a common code file. It adds two #ifndef/#endif pairs to asm-generic/io.h to be able to override xlate_dev_kmem_ptr and xlate_dev_mem_ptr." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pgtable: Fix gmap notifier address s390/dasd: fix handling of gone paths s390/pgtable: Fix check for pgste/storage key handling arch: s390: appldata: using strncpy() and strnlen() instead of sprintf() s390/smp: lost IPIs on cpu hotplug kernel: Fix s390 absolute memory access for /dev/mem s390/dma: do not call debug_dma after free
2013-06-03Merge branch 'for-3.10-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Fix for yet another xattr bug which may lead to NULL deref. - A subtle bug in for_each_descendant_pre(). This bug requires quite specific conditions to trigger and isn't too likely to actually happen in the wild, but maybe that just makes it that much more nastier. - A warning message added for silly cgroup re-mount (not -o remount, but unmount followed by mount) behavior. * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: warn about mismatching options of a new mount of an existing hierarchy cgroup: fix a subtle bug in descendant pre-order walk cgroup: initialize xattr before calling d_instantiate()
2013-06-03Merge branch 'for-3.10-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata changes from Tejun Heo: "Nothing too interesting. PCI ID additions, some sata_rcar fixes and a fringe bug fix for DMADIR handling which shouldn't affect any device remotely modern." * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_rcar: fix interrupt handling ahci: add an observed PCI ID for Marvell 88se9172 SATA controller sata_rcar: clear STOP bit in bmdma_start() method libata: make ata_exec_internal_sg honor DMADIR ata_piix: add PCI IDs for Intel BayTail libata: update "Maintained by:" tags
2013-06-03microblaze: Fix sparse warningsMichal Simek
arch/microblaze/include/asm/uaccess.h:101:3: warning: cast removes address space of expression arch/microblaze/include/asm/uaccess.h:107:2: warning: cast removes address space of expression Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-03KVM: Fix race in apic->pending_events processingGleb Natapov
apic->pending_events processing has a race that may cause INIT and SIPI processing to be reordered: vpu0: vcpu1: set INIT test_and_clear_bit(KVM_APIC_INIT) process INIT set INIT set SIPI test_and_clear_bit(KVM_APIC_SIPI) process SIPI At the end INIT is left pending in pending_events. The following patch fixes this by latching pending event before processing them. Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-03KVM: fix sil/dil/bpl/spl in the mod/rm fieldsPaolo Bonzini
The x86-64 extended low-byte registers were fetched correctly from reg, but not from mod/rm. This fixes another bug in the boot of RHEL5.9 64-bit, but it is still not enough. Cc: <stable@vger.kernel.org> # 3.9 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-03KVM: Emulate multibyte NOPPaolo Bonzini
This is encountered when booting RHEL5.9 64-bit. There is another bug after this one that is not a simple emulation failure, but this one lets the boot proceed a bit. Cc: <stable@vger.kernel.org> # 3.9 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-03ARM: KVM: be more thorough when invalidating TLBsMarc Zyngier
The KVM/ARM MMU code doesn't take care of invalidating TLBs before freeing a {pte,pmd} table. This could cause problems if the page is reallocated and then speculated into by another CPU. Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-06-03ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctlAndre Przywara
Some ARM KVM VCPU ioctls require the vCPU to be properly initialized with the KVM_ARM_VCPU_INIT ioctl before being used with further requests. KVM_RUN checks whether this initialization has been done, but other ioctls do not. Namely KVM_GET_REG_LIST will dereference an array with index -1 without initialization and thus leads to a kernel oops. Fix this by adding checks before executing the ioctl handlers. [ Removed superflous comment from static function - Christoffer ] Changes from v1: * moved check into a static function with a meaningful name Signed-off-by: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-06-03mips/kvm: Use ENOIOCTLCMD to indicate unimplemented ioctls.David Daney
The Linux Way is to return -ENOIOCTLCMD to the vfs when an unimplemented ioctl is requested. Do this in kvm_mips instead of a random mixture of -ENOTSUPP and -EINVAL. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-03mips/kvm: Fix ABI by moving manipulation of CP0 registers to KVM_{G,S}ET_ONE_REGDavid Daney
Because not all 256 CP0 registers are ever implemented, we need a different method of manipulating them. Use the KVM_SET_ONE_REG/KVM_GET_ONE_REG mechanism. Now unused code and definitions are removed. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-03mips/kvm: Use ARRAY_SIZE() instead of hardcoded constants in ↵David Daney
kvm_arch_vcpu_ioctl_{s,g}et_regs Also we cannot set special zero register, so force it to zero. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-03mips/kvm: Fix name of gpr field in struct kvm_regs.David Daney
Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-03mips/kvm: Fix ABI for use of 64-bit registers.David Daney
All registers are 64-bits wide, 32-bit guests use the least significant portion of the register storage fields. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-03mips/kvm: Fix ABI for use of FPU.David Daney
Define a non-empty struct kvm_fpu. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-02net_sched: restore "overhead xxx" handlingEric Dumazet
commit 56b765b79 ("htb: improved accuracy at high rates") broke the "overhead xxx" handling, as well as the "linklayer atm" attribute. tc class add ... htb rate X ceil Y linklayer atm overhead 10 This patch restores the "overhead xxx" handling, for htb, tbf and act_police The "linklayer atm" thing needs a separate fix. Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vimalkumar <j.vimal@gmail.com> Cc: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-02net: force a reload of first item in hlist_nulls_for_each_entry_rcuEric Dumazet
Roman Gushchin discovered that udp4_lib_lookup2() was not reloading first item in the rcu protected list, in case the loop was restarted. This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37 rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is ptr->field : In some cases, gcc caches the value or ptr->field in a register. Use a barrier() to disallow such caching, as documented in Documentation/atomic_ops.txt line 114 Thanks a lot to Roman for providing analysis and numerous patches. Diagnosed-by: Roman Gushchin <klamm@yandex-team.ru> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Boris Zhmurov <zhmurov@yandex-team.ru> Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-02Linux 3.10-rc4Linus Torvalds
2013-06-02sata_rcar: fix interrupt handlingSergei Shtylyov
The driver's interrupt handling code is too picky in deciding whether it should handle an interrupt or not which causes completely unneeded spurious interrupts. Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't get cleared by writing to the SATAINTSTAT register in the interrupt mode we use. Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for enabled interrupts and we should clear only those interrupts that we have read as active first time around, because else we have a race and risk clearing an interrupt that can occur between read and write of the SATAINTSTAT register and never registering it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-02Merge branch 'for-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "This patcheset includes fixes for: - the PCI/LBA which brings back the stifb graphics framebuffer console - possible memory overflows in parisc kernel init code - parport support on older GSC machines - avoids that users by mistake enable PARPORT_PC_SUPERIO on parisc - MAINTAINERS file list updates for parisc." * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: parport0: fix this legacy no-device port driver! parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) parisc/PCI: Set type for LBA bus_num resource MAINTAINERS: update parisc architecture file list parisc: kernel: using strlcpy() instead of strcpy() parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 parisc: memory overflow, 'name' length is too short for using
2013-06-01parisc: parport0: fix this legacy no-device port driver!Helge Deller
Fix the above kernel error from parport_announce_port() on 32bit GSC machines (e.g. B160L). The parport driver requires now a pointer to the device struct. Signed-off-by: Helge Deller <deller@gmx.de>
2013-06-01parport_pc: disable PARPORT_PC_SUPERIO on parisc architectureHelge Deller
If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for various super-io chips by accessing i/o ports in a range which will crash any parisc hardware at once. In addition, parisc has it's own incompatible superio chip (CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for parisc we can avoid that people by accident enable the parport_pc superio option too. Signed-off-by: Helge Deller <deller@gmx.de>
2013-06-01parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus ↵Helge Deller
resources (v2) commit dc7dce280a Author: Bjorn Helgaas <bhelgaas@google.com> Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-01parisc/PCI: Set type for LBA bus_num resourceBjorn Helgaas
The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Helge Deller <deller@gmx.de>
2013-06-01MAINTAINERS: update parisc architecture file listHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-06-01parisc: kernel: using strlcpy() instead of strcpy()Chen Gang
'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Helge Deller <deller@gmx.de>
2013-06-01parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000"Paul Bolle
There's a Makefile line setting cflags for CONFIG_PA7100. But that Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which covers both PA7000 and PA7100 processors. So let's use the corresponding Kconfig macro. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit (git 2.34.1) at 2025-07-15 16:37:59 +0000