summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-25mptcp: safety check before fallbackMatthieu Baerts (NGI0)
Recently, some fallback have been initiated, while the connection was not supposed to fallback. Add a safety check with a warning to detect when an wrong attempt to fallback is being done. This should help detecting any future issues quicker. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-3-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25mptcp: reset when MPTCP opts are dropped after joinMatthieu Baerts (NGI0)
Before this patch, if the checksum was not used, the subflow was only reset if map_data_len was != 0. If there were no MPTCP options or an invalid mapping, map_data_len was not set to the data len, and then the subflow was not reset as it should have been, leaving the MPTCP connection in a wrong fallback mode. This map_data_len condition has been introduced to handle the reception of the infinite mapping. Instead, a new dedicated mapping error could have been returned and treated as a special case. However, the commit 31bf11de146c ("mptcp: introduce MAPPING_BAD_CSUM") has been introduced by Paolo Abeni soon after, and backported later on to stable. It better handle the csum case, and it means the exception for valid_csum_seen in subflow_can_fallback(), plus this one for the infinite mapping in subflow_check_data_avail(), are no longer needed. In other words, the code can be simplified there: a fallback should only be done if msk->allow_infinite_fallback is set. This boolean is set to false once MPTCP-specific operations acting on the whole MPTCP connection vs the initial path have been done, e.g. a second path has been created, or an MPTCP re-injection -- yes, possible even with a single subflow. The subflow_can_fallback() helper can then be dropped, and replaced by this single condition. This also makes the code clearer: a fallback should only be done if it is possible to do so. While at it, no need to set map_data_len to 0 in get_mapping_status() for the infinite mapping case: it will be set to skb->len just after, at the end of subflow_check_data_avail(), and not read in between. Fixes: f8d4bcacff3b ("mptcp: infinite mapping receiving") Cc: stable@vger.kernel.org Reported-by: Chester A. Unal <chester.a.unal@xpedite-tech.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/544 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Tested-by: Chester A. Unal <chester.a.unal@xpedite-tech.com> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-2-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25mptcp: always handle address removal under msk socket lockPaolo Abeni
Syzkaller reported a lockdep splat in the PM control path: WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Modules linked in: CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline] RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline] RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283 RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408 RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000 R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0 R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00 FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59 mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486 mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline] mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:733 ____sys_sendmsg+0x53a/0x860 net/socket.c:2573 ___sys_sendmsg net/socket.c:2627 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7e9998cde9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9 RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007 RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088 Indeed the PM can try to send a RM_ADDR over a msk without acquiring first the msk socket lock. The bugged code-path comes from an early optimization: when there are no subflows, the PM should (usually) not send RM_ADDR notifications. The above statement is incorrect, as without locks another process could concurrent create a new subflow and cause the RM_ADDR generation. Additionally the supposed optimization is not very effective even performance-wise, as most mptcp sockets should have at least one subflow: the MPC one. Address the issue removing the buggy code path, the existing "slow-path" will handle correctly even the edge case. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reported-by: syzbot+cd3ce3d03a3393ae9700@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/546 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-1-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25tcp: devmem: don't write truncated dmabuf CMSGs to userspaceStanislav Fomichev
Currently, we report -ETOOSMALL (err) only on the first iteration (!sent). When we get put_cmsg error after a bunch of successful put_cmsg calls, we don't signal the error at all. This might be confusing on the userspace side which will see truncated CMSGs but no MSG_CTRUNC signal. Consider the following case: - sizeof(struct cmsghdr) = 16 - sizeof(struct dmabuf_cmsg) = 24 - total cmsg size (CMSG_LEN) = 40 (16+24) When calling recvmsg with msg_controllen=60, the userspace will receive two(!) dmabuf_cmsg(s), the first one will be a valid one and the second one will be silently truncated. There is no easy way to discover the truncation besides doing something like "cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))". Introduce new put_devmem_cmsg wrapper that reports an error instead of doing the truncation. Mina suggests that it's the intended way this API should work. Note that we might now report MSG_CTRUNC when the users (incorrectly) call us with msg_control == NULL. Fixes: 8f0b3cc9a4c1 ("tcp: RX path for devmem TCP") Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: ethernet: ti: am65-cpsw: select PAGE_POOLSascha Hauer
am65-cpsw uses page_pool_dev_alloc_pages(), thus needs PAGE_POOL selected to avoid linker errors. This is missing since the driver started to use page_pool helpers in 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250224-net-am654-nuss-kconfig-v2-1-c124f4915c92@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25cifs: Fix the smb1 readv callback to correctly call netfsDavid Howells
Fix cifs_readv_callback() to call netfs_read_subreq_terminated() rather than queuing the subrequest work item (which is unset). Also call the I/O progress tracepoint. cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Reported-by: Jean-Christophe Guillain <jean-christophe@guillain.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219793 Tested-by: Jean-Christophe Guillain <jean-christophe@guillain.net> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-02-25uprobes: Remove too strict lockdep_assert() condition in hprobe_expire()Andrii Nakryiko
hprobe_expire() is used to atomically switch pending uretprobe instance (struct return_instance) from being SRCU protected to be refcounted. This can be done from background timer thread, or synchronously within current thread when task is forked. In the former case, return_instance has to be protected through RCU read lock, and that's what hprobe_expire() used to check with lockdep_assert(rcu_read_lock_held()). But in the latter case (hprobe_expire() called from dup_utask()) there is no RCU lock being held, and it's both unnecessary and incovenient. Inconvenient due to the intervening memory allocations inside dup_return_instance()'s loop. Unnecessary because dup_utask() is called synchronously in current thread, and no uretprobe can run at that point, so return_instance can't be freed either. So drop rcu_read_lock_held() condition, and expand corresponding comment to explain necessary lifetime guarantees. lockdep_assert()-detected issue is a false positive. Fixes: dd1a7567784e ("uprobes: SRCU-protect uretprobe lifetime (with timeout)") Reported-by: Breno Leitao <leitao@debian.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250225223214.2970740-1-andrii@kernel.org
2025-02-25x86/entry: Fix kernel-doc warningDaniel Sneddon
The do_int80_emulation() function is missing a kernel-doc formatted description of its argument. This is causing a warning when building with W=1. Add a brief description of the argument to satisfy kernel-doc. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20241219155227.685692-1-daniel.sneddon@linux.intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202412131236.a5HhOqXo-lkp@intel.com/
2025-02-25perf/x86/rapl: Add support for Intel Arrow Lake UAaron Ma
Add Arrow Lake U model for RAPL: $ ls -1 /sys/devices/power/events/ energy-cores energy-cores.scale energy-cores.unit energy-gpu energy-gpu.scale energy-gpu.unit energy-pkg energy-pkg.scale energy-pkg.unit energy-psys energy-psys.scale energy-psys.unit The same output as ArrowLake: $ perf stat -a -I 1000 --per-socket -e power/energy-pkg/ Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20241224145516.349028-1-aaron.ma@canonical.com
2025-02-25x86/irq: Define trace events conditionallyArnd Bergmann
When both of X86_LOCAL_APIC and X86_THERMAL_VECTOR are disabled, the irq tracing produces a W=1 build warning for the tracing definitions: In file included from include/trace/trace_events.h:27, from include/trace/define_trace.h:113, from arch/x86/include/asm/trace/irq_vectors.h:383, from arch/x86/kernel/irq.c:29: include/trace/stages/init.h:2:23: error: 'str__irq_vectors__trace_system_name' defined but not used [-Werror=unused-const-variable=] Make the tracepoints conditional on the same symbosl that guard their usage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250225213236.3141752-1-arnd@kernel.org
2025-02-25x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systemsRussell Senior
I still have some Soekris net4826 in a Community Wireless Network I volunteer with. These devices use an AMD SC1100 SoC. I am running OpenWrt on them, which uses a patched kernel, that naturally has evolved over time. I haven't updated the ones in the field in a number of years (circa 2017), but have one in a test bed, where I have intermittently tried out test builds. A few years ago, I noticed some trouble, particularly when "warm booting", that is, doing a reboot without removing power, and noticed the device was hanging after the kernel message: [ 0.081615] Working around Cyrix MediaGX virtual DMA bugs. If I removed power and then restarted, it would boot fine, continuing through the message above, thusly: [ 0.081615] Working around Cyrix MediaGX virtual DMA bugs. [ 0.090076] Enable Memory-Write-back mode on Cyrix/NSC processor. [ 0.100000] Enable Memory access reorder on Cyrix/NSC processor. [ 0.100070] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.110058] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.120037] CPU: NSC Geode(TM) Integrated Processor by National Semi (family: 0x5, model: 0x9, stepping: 0x1) [...] In order to continue using modern tools, like ssh, to interact with the software on these old devices, I need modern builds of the OpenWrt firmware on the devices. I confirmed that the warm boot hang was still an issue in modern OpenWrt builds (currently using a patched linux v6.6.65). Last night, I decided it was time to get to the bottom of the warm boot hang, and began bisecting. From preserved builds, I narrowed down the bisection window from late February to late May 2019. During this period, the OpenWrt builds were using 4.14.x. I was able to build using period-correct Ubuntu 18.04.6. After a number of bisection iterations, I identified a kernel bump from 4.14.112 to 4.14.113 as the commit that introduced the warm boot hang. https://github.com/openwrt/openwrt/commit/07aaa7e3d62ad32767d7067107db64b6ade81537 Looking at the upstream changes in the stable kernel between 4.14.112 and 4.14.113 (tig v4.14.112..v4.14.113), I spotted a likely suspect: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=20afb90f730982882e65b01fb8bdfe83914339c5 So, I tried reverting just that kernel change on top of the breaking OpenWrt commit, and my warm boot hang went away. Presumably, the warm boot hang is due to some register not getting cleared in the same way that a loss of power does. That is approximately as much as I understand about the problem. More poking/prodding and coaching from Jonas Gorski, it looks like this test patch fixes the problem on my board: Tested against v6.6.67 and v4.14.113. Fixes: 18fb053f9b82 ("x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors") Debugged-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/CAHP3WfOgs3Ms4Z+L9i0-iBOE21sdMk5erAiJurPjnrL9LSsgRA@mail.gmail.com Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2025-02-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: - Fix a mlx5 malfunction if the UMR QP gets an error - Return the correct port number to userspace for a mlx5 DCT - Don't cause a UMR QP error if DMABUF teardown races with invalidation - Fix a WARN splat when unregisering so mlx5 device memory MR types - Use the correct alignment for the mana doorbell so that two processes do not share the same physical page on non-4k page systems - MAINTAINERS updates for MANA - Retry failed HNS FW commands because some can take a long time - Cast void * handle to the correct type in bnxt to fix corruption - Avoid a NULL pointer crash in bnxt_re - Fix skipped ib_device_unregsiter() for bnxt_re due to some earlier rework - Correctly detect if the bnxt supports extended statistics - Fix refcount leak in mlx5 odp introduced by a previous fix - Map the FW result for the port rate to the userspace values properly in mlx5, returns correct values for newer 800G ports - Don't wrongly destroy counters objects that were not automatically created during mlx5 bind qp - Set page size/shift members of kernel owned SRQs to fix a crash in nvme target * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers RDMA/mlx5: Fix bind QP error cleanup flow RDMA/mlx5: Fix AH static rate parsing RDMA/mlx5: Fix implicit ODP hang on parent deregistration RDMA/bnxt_re: Fix the statistics for Gen P7 VF RDMA/bnxt_re: Fix issue in the unload path RDMA/bnxt_re: Add sanity checks on rdev validity RDMA/bnxt_re: Fix an issue in bnxt_re_async_notifier RDMA/hns: Fix mbox timing out by adding retry mechanism MAINTAINERS: update maintainer for Microsoft MANA RDMA driver RDMA/mana_ib: Allocate PAGE aligned doorbell index RDMA/mlx5: Fix a WARN during dereg_mr for DM type RDMA/mlx5: Fix a race for DMABUF MR which can lead to CQE with error IB/mlx5: Set and get correct qp_num for a DCT QP RDMA/mlx5: Fix the recovery flow of the UMR QP
2025-02-25Merge tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix tools/ quiet build Makefile infrastructure that was broken when working on tools/perf/ without testing on other tools/ living utilities. * tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: tools: Remove redundant quiet setup tools: Unify top-level quiet infrastructure
2025-02-25x86/of: Don't use DTB for SMP setup if ACPI is enabledDmytro Maluka
There are cases when it is useful to use both ACPI and DTB provided by the bootloader, however in such cases we should make sure to prevent conflicts between the two. Namely, don't try to use DTB for SMP setup if ACPI is enabled. Precisely, this prevents at least: - incorrectly calling register_lapic_address(APIC_DEFAULT_PHYS_BASE) after the LAPIC was already successfully enumerated via ACPI, causing noisy kernel warnings and probably potential real issues as well - failed IOAPIC setup in the case when IOAPIC is enumerated via mptable instead of ACPI (e.g. with acpi=noirq), due to mpparse_parse_smp_config() overridden by x86_dtb_parse_smp_config() Signed-off-by: Dmytro Maluka <dmaluka@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250105172741.3476758-2-dmaluka@chromium.org
2025-02-25Input: i8042 - swap old quirk combination with new quirk for more devicesWerner Sembach
Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. We could not activly retest these devices because we no longer have them in our archive, but based on the other old Clevo barebones we tested where the new quirk had the same or a better behaviour I think it would be good to apply it on these too. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-02-25Input: i8042 - swap old quirk combination with new quirk for several devicesWerner Sembach
Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. While the old quirk combination did not show negative effects on these devices specifically, the new quirk works just as well and seems more stable in general. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-02-25Input: i8042 - add required quirks for missing old boardnamesWerner Sembach
Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF, P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume. This quirk fixes that. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-02-25Input: i8042 - swap old quirk combination with new quirk for NHxxRZQWerner Sembach
Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. With the old i8042 quirks this devices keyboard is sometimes laggy after resume. With the new quirk this issue doesn't happen. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-02-25lsm,nfs: fix memory leak of lsm_contextStephen Smalley
commit b530104f50e8 ("lsm: lsm_context in security_dentry_init_security") did not preserve the lsm id for subsequent release calls, which results in a memory leak. Fix it by saving the lsm id in the nfs4_label and providing it on the subsequent release call. Fixes: b530104f50e8 ("lsm: lsm_context in security_dentry_init_security") Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-02-25sunrpc: suppress warnings for unused procfs functionsArnd Bergmann
There is a warning about unused variables when building with W=1 and no procfs: net/sunrpc/cache.c:1660:30: error: 'cache_flush_proc_ops' defined but not used [-Werror=unused-const-variable=] 1660 | static const struct proc_ops cache_flush_proc_ops = { | ^~~~~~~~~~~~~~~~~~~~ net/sunrpc/cache.c:1622:30: error: 'content_proc_ops' defined but not used [-Werror=unused-const-variable=] 1622 | static const struct proc_ops content_proc_ops = { | ^~~~~~~~~~~~~~~~ net/sunrpc/cache.c:1598:30: error: 'cache_channel_proc_ops' defined but not used [-Werror=unused-const-variable=] 1598 | static const struct proc_ops cache_channel_proc_ops = { | ^~~~~~~~~~~~~~~~~~~~~~ These are used inside of an #ifdef, so replacing that with an IS_ENABLED() check lets the compiler see how they are used while still dropping them during dead code elimination. Fixes: dbf847ecb631 ("knfsd: allow cache_register to return error on failure") Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-02-25perf/x86/intel: Use better start period for frequency modeKan Liang
Freqency mode is the current default mode of Linux perf. A period of 1 is used as a starting period. The period is auto-adjusted on each tick or an overflow, to meet the frequency target. The start period of 1 is too low and may trigger some issues: - Many HWs do not support period 1 well. https://lore.kernel.org/lkml/875xs2oh69.ffs@tglx/ - For an event that occurs frequently, period 1 is too far away from the real period. Lots of samples are generated at the beginning. The distribution of samples may not be even. - A low starting period for frequently occurring events also challenges virtualization, which has a longer path to handle a PMI. The limit_period value only checks the minimum acceptable value for HW. It cannot be used to set the start period, because some events may need a very low period. The limit_period cannot be set too high. It doesn't help with the events that occur frequently. It's hard to find a universal starting period for all events. The idea implemented by this patch is to only give an estimate for the popular HW and HW cache events. For the rest of the events, start from the lowest possible recommended value. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250117151913.3043942-3-kan.liang@linux.intel.com
2025-02-25arm64: dts: bcm2712: PL011 UARTs are actually r1p5Phil Elwell
The ARM PL011 UART instances in BCM2712 are r1p5 spec, which means they have 32-entry FIFOs. The correct periphid value for this is 0x00341011. Thanks to N Buchwitz for pointing this out. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250223125614.3592-3-wahrenst@gmx.net Fixes: faa3381267d0 ("arm64: dts: broadcom: Add minimal support for Raspberry Pi 5") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-02-25ARM: dts: bcm2711: PL011 UARTs are actually r1p5Phil Elwell
The ARM PL011 UART instances in BCM2711 are r1p5 spec, which means they have 32-entry FIFOs. The correct periphid value for this is 0x00341011. Thanks to N Buchwitz for pointing this out. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250223125614.3592-2-wahrenst@gmx.net Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-02-25ARM: dts: bcm2711: Fix xHCI power-domainStefan Wahren
During s2idle tests on the Raspberry CM4 the VPU firmware always crashes on xHCI power-domain resume: root@raspberrypi:/sys/power# echo freeze > state [ 70.724347] xhci_suspend finished [ 70.727730] xhci_plat_suspend finished [ 70.755624] bcm2835-power bcm2835-power: Power grafx off [ 70.761127] USB: Set power to 0 [ 74.653040] USB: Failed to set power to 1 (-110) This seems to be caused because of the mixed usage of raspberrypi-power and bcm2835-power at the same time. So avoid the usage of the VPU firmware power-domain driver, which prevents the VPU crash. Fixes: 522c35e08b53 ("ARM: dts: bcm2711: Add BCM2711 xHCI support") Link: https://github.com/raspberrypi/linux/issues/6537 Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250201112729.31509-1-wahrenst@gmx.net Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-02-25sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called ↵Tejun Heo
without balance() a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") added a workaround to handle the cases where pick_task_scx() is called without prececing balance_scx() which is due to a fair class bug where pick_taks_fair() may return NULL after a true return from balance_fair(). The workaround detects when pick_task_scx() is called without preceding balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid stalling. Unfortunately, the workaround code was testing whether @prev was on SCX to decide whether to keep the task running. This is incorrect as the task may be on SCX but no longer runnable. This could lead to a non-runnable task to be returned from pick_task_scx() which cause interesting confusions and failures. e.g. A common failure mode is the task ending up with (!on_rq && on_cpu) state which can cause potential wakers to busy loop, which can easily lead to deadlocks. Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes @prev_on_scx only used in one place. Open code the usage and improve the comment while at it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Pat Cody <patcody@meta.com> Fixes: a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") Cc: stable@vger.kernel.org # v6.12+ Acked-by: Andrea Righi <arighi@nvidia.com>
2025-02-25objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturnsYouling Tang
Fix the following objtool warning during build time: fs/bcachefs/btree_cache.o: warning: objtool: btree_node_lock.constprop.0() falls through to next function bch2_recalc_btree_reserve() fs/bcachefs/btree_update.o: warning: objtool: bch2_trans_update_get_key_cache() falls through to next function need_whiteout_for_snapshot() bch2_trans_unlocked_or_in_restart_error() is an Obviously Correct (tm) panic() wrapper, add it to the list of known noreturns. Fixes: b318882022a8 ("bcachefs: bch2_trans_verify_not_unlocked_or_in_restart()") Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Youling Tang <tangyouling@kylinos.cn> Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20250218064230.219997-1-youling.tang@linux.dev Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-02-25ASoC: Intel: don't check number of sdw links when setMark Brown
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>: Currently, we assume that the PCH DMIC pins are pin-muxed with SoundWire links. However, we do see a HW design that use PCH DMIC along with 3 SoundWire links. Remove the check and add warning to let users know that SoundWire MIC and PCH DMIC are both present and they could overwrite it with kernel params.
2025-02-25objtool: Fix C jump table annotations for ClangArd Biesheuvel
A C jump table (such as the one used by the BPF interpreter) is a const global array of absolute code addresses, and this means that the actual values in the table may not be known until the kernel is booted (e.g., when using KASLR or when the kernel VA space is sized dynamically). When using PIE codegen, the compiler will default to placing such const global objects in .data.rel.ro (which is annotated as writable), rather than .rodata (which is annotated as read-only). As C jump tables are explicitly emitted into .rodata, this used to result in warnings for LoongArch builds (which uses PIE codegen for the entire kernel) like Warning: setting incorrect section attributes for .rodata..c_jump_table due to the fact that the explicitly specified .rodata section inherited the read-write annotation that the compiler uses for such objects when using PIE codegen. This warning was suppressed by explicitly adding the read-only annotation to the __attribute__((section(""))) string, by commit c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table") Unfortunately, this hack does not work on Clang's integrated assembler, which happily interprets the appended section type and permission specifiers as part of the section name, which therefore no longer matches the hard-coded pattern '.rodata..c_jump_table' that objtool expects, causing it to emit a warning kernel/bpf/core.o: warning: objtool: ___bpf_prog_run+0x20: sibling call from callable instruction with modified stack frame Work around this, by emitting C jump tables into .data.rel.ro instead, which is treated as .rodata by the linker script for all builds, not just PIE based ones. Fixes: c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table") Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> # on LoongArch Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250221135704.431269-6-ardb+git@google.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-02-25vmlinux.lds: Ensure that const vars with relocations are mapped R/OArd Biesheuvel
In the kernel, there are architectures (x86, arm64) that perform boot-time relocation (for KASLR) without relying on PIE codegen. In this case, all const global objects are emitted into .rodata, including const objects with fields that will be fixed up by the boot-time relocation code. This implies that .rodata (and .text in some cases) need to be writable at boot, but they will usually be mapped read-only as soon as the boot completes. When using PIE codegen, the compiler will emit const global objects into .data.rel.ro rather than .rodata if the object contains fields that need such fixups at boot-time. This permits the linker to annotate such regions as requiring read-write access only at load time, but not at execution time (in user space), while keeping .rodata truly const (in user space, this is important for reducing the CoW footprint of dynamic executables). This distinction does not matter for the kernel, but it does imply that const data will end up in writable memory if the .data.rel.ro sections are not treated in a special way, as they will end up in the writable .data segment by default. So emit .data.rel.ro into the .rodata segment. Cc: stable@vger.kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250221135704.431269-5-ardb+git@google.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2025-02-25Merge tag 'for-6.14-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - extent map shrinker fixes: - fix potential use after free accessing an inode to reach fs_info, the shrinker could do iput() in the meantime - skip unnecessary scanning of inodes without extent maps - do direct iput(), no need for indirection via workqueue - in block < page mode, fix race when extending i_size in buffered mode - fix minor memory leak in selftests - print descriptive error message when seeding device is not found * tag 'for-6.14-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix data overwriting bug during buffered write when block size < page size btrfs: output an error message if btrfs failed to find the seed fsid btrfs: do regular iput instead of delayed iput during extent map shrinking btrfs: skip inodes without loaded extent maps when shrinking extent maps btrfs: fix use-after-free on inode when scanning root during em shrinking btrfs: selftests: fix btrfs_test_delayed_refs() leak of transaction
2025-02-25drm/amdgpu: init return value in amdgpu_ttm_clear_bufferPierre-Eric Pelloux-Prayer
Otherwise an uninitialized value can be returned if amdgpu_res_cleared returns true for all regions. Possibly closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812 Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality") Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7c62aacc3b452f73a1284198c81551035fac6d71) Cc: stable@vger.kernel.org
2025-02-25drm/amd/display: Fix HPD after gpu resetRoman Li
[Why] DC is not using amdgpu_irq_get/put to manage the HPD interrupt refcounts. So when amdgpu_irq_gpu_reset_resume_helper() reprograms all of the IRQs, HPD gets disabled. [How] Use amdgpu_irq_get/put() for HPD init/fini in DM in order to sync refcounts Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f3dde2ff7fcaacd77884502e8f572f2328e9c745) Cc: stable@vger.kernel.org
2025-02-25drm/amd/display: add a quirk to enable eDP0 on DP1Yilin Chen
[why] some board designs have eDP0 connected to DP1, need a way to enable support_edp0_on_dp1 flag, otherwise edp related features cannot work [how] do a dmi check during dm initialization to identify systems that require support_edp0_on_dp1. Optimize quirk table with callback functions to set quirk entries, retrieve_dmi_info can set quirks according to quirk entries Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yilin Chen <Yilin.Chen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f6d17270d18a6a6753fff046330483d43f8405e4) Cc: stable@vger.kernel.org
2025-02-25drm/amd/display: Disable PSR-SU on eDP panelsTom Chung
[Why] PSR-SU may cause some glitching randomly on several panels. [How] Temporarily disable the PSR-SU and fallback to PSR1 for all eDP panels. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3388 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 6deeefb820d0efb0b36753622fb982d03b37b3ad) Cc: stable@vger.kernel.org
2025-02-25MAINTAINERS: Update AMDGPU DML maintainers infoAurabindo Pillai
Chaitanya is no longer with AMD, and the responsibility has been taken over by Austin. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a101fa705d016d46463dd4ce488671369c922bc2) Cc: stable@vger.kernel.org
2025-02-25drm/amd/display: restore edid reading from a given i2c adapterMelissa Wen
When switching to drm_edid, we slightly changed how to get edid by removing the possibility of getting them from dc_link when in aux transaction mode. As MST doesn't initialize the connector with `drm_connector_init_with_ddc()`, restore the original behavior to avoid functional changes. v2: - Fix build warning of unchecked dereference (kernel test bot) CC: Alex Hung <alex.hung@amd.com> CC: Mario Limonciello <mario.limonciello@amd.com> CC: Roman Li <Roman.Li@amd.com> CC: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 81262b1656feb3813e3d917ab78824df6831e69e)
2025-02-25mailmap: Add entry for Rodrigo SiqueiraRodrigo Siqueira
Map all of my previously used email addresses to my @igalia.com address. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 289387d0dbf806bd59063ab93d94f48cd4c75c7c) Cc: stable@vger.kernel.org
2025-02-25MAINTAINERS: Change my role from Maintainer to ReviewerRodrigo Siqueira
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9b3ef540397cfc356f10f504841b2e9d16e31286) Cc: stable@vger.kernel.org
2025-02-25drm/amdgpu/mes: keep enforce isolation up to dateAlex Deucher
Re-send the mes message on resume to make sure the mes state is up to date. Fixes: 8521e3c5f058 ("drm/amd/amdgpu: limit single process inside MES") Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Shaoyun Liu <shaoyun.liu@amd.com> Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 27b791514789844e80da990c456c2465325e0851)
2025-02-25drm/amdgpu/gfx: only call mes for enforce isolation if supportedAlex Deucher
This should not be called on chips without MES so check if MES is enabled and if the cleaner shader is supported. Fixes: 8521e3c5f058 ("drm/amd/amdgpu: limit single process inside MES") Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Shaoyun Liu <shaoyun.liu@amd.com> Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> (cherry picked from commit 80513e389765c8f9543b26d8fa4bbdf0e59ff8bc)
2025-02-25MAINTAINERS: update amdgpu maintainers listAlex Deucher
Xinhui's email is no longer valid. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c19390ca9094dfcbc16d96b233a409c01e21d85b) Cc: stable@vger.kernel.org
2025-02-25drm/amdgpu: disable BAR resize on Dell G5 SEAlex Deucher
There was a quirk added to add a workaround for a Sapphire RX 5600 XT Pulse that didn't allow BAR resizing. However, the quirk caused a regression with runtime pm on Dell laptops using those chips, rather than narrowing the scope of the resizing quirk, add a quirk to prevent amdgpu from resizing the BAR on those Dell platforms unless runtime pm is disabled. v2: update commit message, add runpm check Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707 Fixes: 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5235053f443cef4210606e5fb71f99b915a9723d) Cc: stable@vger.kernel.org
2025-02-25drm/amdkfd: Preserve cp_hqd_pq_control on update_mqdDavid Yat Sin
When userspace applications call AMDKFD_IOC_UPDATE_QUEUE. Preserve bitfields that do not need to be modified as they contain flags to track queue states that are used by CP FW. Signed-off-by: David Yat Sin <David.YatSin@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8150827990b709ab5a40c46c30d21b7f7b9e9440) Cc: stable@vger.kernel.org
2025-02-25amdgpu/pm/legacy: fix suspend/resume issueschr[]
resume and irq handler happily races in set_power_state() * amdgpu_legacy_dpm_compute_clocks() needs lock * protect irq work handler * fix dpm_enabled usage v2: fix clang build, integrate Lijo's comments (Alex) Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2524 Fixes: 3712e7a49459 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> # on Oland PRO Signed-off-by: chr[] <chris@rudorff.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ee3dc9e204d271c9c7a8d4d38a0bce4745d33e71) Cc: stable@vger.kernel.org
2025-02-25Merge tag 'vfs-6.14-rc5.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Use __readahead_folio() in fuse again to fix a UAF issue when using splice - Remove d_op->d_delete method from pidfs - Remove d_op->d_delete method from nsfs - Simplify iomap_dio_bio_iter() - Fix a UAF in ovl_dentry_update_reval - Fix a miscalulated file range for filemap_fdatawrite_range_kick() - Don't skip skip dirty page in folio_unmap_invalidate() * tag 'vfs-6.14-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: iomap: Minor code simplification in iomap_dio_bio_iter() nsfs: remove d_op->d_delete pidfs: remove d_op->d_delete mm/truncate: don't skip dirty page in folio_unmap_invalidate() mm/filemap: fix miscalculated file range for filemap_fdatawrite_range_kick() fuse: don't truncate cached, mutated symlink ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up fuse: revert back to __readahead_folio() for readahead
2025-02-25nvme-ioctl: fix leaked requests on mapping errorKeith Busch
All the callers assume nvme_map_user_request() frees the request on a failure. This wasn't happening on invalid metadata or io_uring command flags, so we've been leaking those requests. Fixes: 23fd22e55b767b ("nvme: wire up fixed buffer support for nvme passthrough") Fixes: 7c2fd76048e95d ("nvme: fix metadata handling in nvme-passthrough") Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-02-25pinctrl: spacemit: enable config optionYixun Lan
Pinctrl is an essential driver for SpacemiT's SoC, The uart driver requires it, same as sd card driver, so let's enable it by default for this SoC. The CONFIG_PINCTRL_SPACEMIT_K1 isn't enabled when using 'make defconfig' to select kernel configuration options. This result in a broken uart driver where fail at probe() stage due to no pins found. Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC") Reported-by: Alex Elder <elder@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Alex Elder <elder@riscstar.com> Signed-off-by: Yixun Lan <dlan@gentoo.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/20250218-k1-pinctrl-option-v3-1-36e031e0da1b@gentoo.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-02-25pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fwCharles Han
devm_kasprintf() calls can return null pointers on failure. But the return values were not checked in npcm8xx_gpio_fw(). Add NULL check in npcm8xx_gpio_fw(), to handle kernel NULL pointer dereference error. Fixes: acf4884a5717 ("pinctrl: nuvoton: add NPCM8XX pinctrl and GPIO driver") Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://lore.kernel.org/20250212100532.4317-1-hanchunchao@inspur.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-02-25pinctrl: bcm281xx: Fix incorrect regmap max_registers valueArtur Weber
The max_registers value does not take into consideration the stride; currently, it's set to the number of the last pin, but this does not accurately represent the final register. Fix this by multiplying the current value by 4. Fixes: 54b1aa5a5b16 ("ARM: pinctrl: Add Broadcom Capri pinctrl driver") Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250207-bcm21664-pinctrl-v1-2-e7cfac9b2d3b@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-02-25Input: xpad - rename QH controller to Legion Go SAntheas Kapenekakis
The QH controller is actually the controller of the Legion Go S, with the manufacturer string wch.cn and product name Legion Go S in its USB descriptor. A cursory lookup of the VID reveals the same. Therefore, rename the xpad entries to match. Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250222170010.188761-4-lkml@antheas.dev Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-07-19 23:54:05 +0000