summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-30Merge branch 'r8152-net'David S. Miller
Hayes Wang says: ==================== r8152: patches for autosuspend There are unexpected processes when enabling autosuspend. These patches are used to fix them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30r8152: check WORK_ENABLE in suspend functionhayeswang
Avoid unnecessary behavior when autosuspend occurs during open(). The relative processes should only be run after finishing open(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30r8152: reset tp->speed before autoresuming in open functionhayeswang
If (tp->speed & LINK_STATUS) is not zero, the rtl8152_resume() would call rtl_start_rx() before enabling the tx/rx. Avoid this by resetting it to zero. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30r8152: clear SELECTIVE_SUSPEND when autoresuminghayeswang
The flag of SELECTIVE_SUSPEND should be cleared when autoresuming. Otherwise, when the system suspend and resume occur, it may have the wrong flow. Besides, because the flag of SELECTIVE_SUSPEND couldn't be used to check if the hw enables the relative feature, it should alwayes be disabled in close(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30rtlwifi: rtl8192se: Fix firmware loadingLarry Finger
An error in the code makes the allocated space for firmware to be too small. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30rtlwifi: rtl8192ce: Add missing section to read descriptor settingLarry Finger
The new version of rtlwifi needs code in rtl92ce_get_desc() that returns the buffer address for read operations. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30rtlwifi: rtl8192se: Add missing section to read descriptor settingLarry Finger
The new version of rtlwifi needs code in rtl92se_get_desc() that returns the buffer address for read operations. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30rtlwifi: rtl8192se: Fix duplicate calls to ieee80211_register_hw()Larry Finger
Driver rtlwifi has been modified to call ieee80211_register_hw() from the probe routine; however, the existing call in the callback routine for deferred firmware loading was not removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30rtlwifi: rtl8192ce: rtl8192de: rtl8192se: Fix handling for missing ↵Larry Finger
get_btc_status The recent changes in checking for Bluetooth status added some callbacks to code in rtlwifi. To make certain that all callbacks are defined, a dummy routine has been added to rtlwifi, and the drivers that need to use it are modified. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30mwifiex: restart rxreorder timer correctlyMarc Yang
During 11n RX reordering, if there is a hole in RX table, driver will not send packets to kernel until the rxreorder timer expires or the table is full. However, currently driver always restarts rxreorder timer when receiving a packet, which causes the timer hardly to expire. So while connected with to 11n AP in a busy environment, ping packets may get blocked for about 30 seconds. This patch fixes this timer restarting by ensuring rxreorder timer would only be restarted either timer is not set or start_win has changed. Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Plus Chen <pchen@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30ath9k: fix some debugfs outputDan Carpenter
The right shift operation has higher precedence than the mask so we left shift by "(i * 3)" and then immediately right shift by "(i * 3)" then we mask. It should be left shift, mask, and then right shift. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30wireless: rt2x00: add new rt2800usb deviceCyril Brulebois
0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle References: https://bugs.debian.org/766802 Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz> Cc: stable@vger.kernel.org Signed-off-by: Cyril Brulebois <kibi@debian.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30[media] ds3000: fix LNB supply voltage on Tevii S480 on initializationUlrich Eckhardt
The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not automatically power down. This blocks other receivers connected to a satellite channel router (EN50494), since the receivers can not send the required DiSEqC sequences when the Tevii card is connected to a the same SCR. This patch switches off the LNB supply voltage on initialization of the frontend. [mchehab@osg.samsung.com: add a comment about why we're explicitly turning off voltage at device init] Cc: stable@vger.kernel.org Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30PCI: Rename sysfs 'enabled' file back to 'enable'Greg Kroah-Hartman
Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"), I misstyped the 'enable' sysfs filename as 'enabled', which broke the userspace API. This patch fixes that issue by renaming the file back. Fixes: 5136b2da770d ("PCI: convert bus code to use dev_groups") Reported-by: Jeff Epler <jepler@unpythonic.net> Tested-by: Jeff Epler <jepler@unpythonic.net> # on v3.14-rt Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # 3.13
2014-10-30Merge tag 'fbdev-fixes-3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - fix fb console option parsing - fixes for OMAPDSS/OMAPFB crashes related to module unloading and device/driver binding & unbinding. - fix for OMAP HDMI PLL locking failing in certain cases - misc minor fixes for atmel lcdfb and OMAP * tag 'fbdev-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omap: dss: connector-analog-tv: Add missing module device table OMAPDSS: DSI: Fix PLL_SELFEQDCO field width OMAPDSS: fix dispc register dump for preload & mflag OMAPDSS: DISPC: fix mflag offset OMAPDSS: HDMI: fix regsd write OMAPDSS: HDMI: fix PLL GO bit handling OMAPFB: fix releasing overlays OMAPFB: fix overlay disable when freeing resources. OMAPDSS: apply: wait pending updates on manager disable OMAPFB: remove __exit annotation OMAPDSS: set suppress_bind_attrs OMAPFB: add missing MODULE_ALIAS() drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header video/console: Resolve several shadow warnings fbcon: Fix option parsing control flow in fb_console_setup
2014-10-30arm64: psci: fix cpu_suspend to check idle state type for indexAmit Daniel Kachhap
This fix rectifies the psci cpu_suspend implementation to check the PSCI power state parameter type field associated with the requested idle state index. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30Merge tag 'sound-3.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Although the diffstat looks scary, it's just because of the removal of the dead code (s6000), thus it must not affect anything serious. Other than that, all small fixes. The only core fix is zero-clear for a PCM compat ioctl. The rest are driver-specific, bebob, sgtl500, adau1761, intel-sst, ad1889 and a few HD-audio quirks as usual" * tag 'sound-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add workaround for CMI8888 snoop behavior ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_get ALSA: hda/realtek - New SSID for Headset quirk ALSA: ad1889: Fix probable mask then right shift defects ALSA: bebob: fix wrong decoding of clock information for Terratec PHASE 88 Rack FW ALSA: hda/realtek - Update restore default value for ALC283 ALSA: hda/realtek - Update restore default value for ALC282 ASoC: fsl: use strncpy() to prevent copying of over-long names ASoC: adau1761: Fix input PGA volume ASoC: s6000: remove driver ASoC: Intel: HSW/BDW only support S16 and S24 formats. ASoC: sgtl500: Document the required supplies
2014-10-30MAINTAINERS: drop list entry for davinciLad, Prabhakar
As davinci-linux-open-source@linux.davincidsp.com is now shut and no more maintained by TI, drop this entry from DAVINCI MACHINE SUPPORT and DAVINCI SERIES MEDIA DRIVER. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-10-30ext4: make ext4_ext_convert_to_initialized() return proper number of blocksJan Kara
ext4_ext_convert_to_initialized() can return more blocks than are actually allocated from map->m_lblk in case where initial part of the on-disk extent is zeroed out. Luckily this doesn't have serious consequences because the caller currently uses the return value only to unmap metadata buffers. Anyway this is a data corruption/exposure problem waiting to happen so fix it. Coverity-id: 1226848 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30ext4: bail early when clearing inode journal flag failsJan Kara
When clearing inode journal flag, we call jbd2_journal_flush() to force all the journalled data to their final locations. Currently we ignore when this fails and continue clearing inode journal flag. This isn't a big problem because when jbd2_journal_flush() fails, journal is likely aborted anyway. But it can still lead to somewhat confusing results so rather bail out early. Coverity-id: 989044 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30ext4: bail out from make_indexed_dir() on first errorJan Kara
When ext4_handle_dirty_dx_node() or ext4_handle_dirty_dirent_node() fail, there's really something wrong with the fs and there's no point in continuing further. Just return error from make_indexed_dir() in that case. Also initialize frames array so that if we return early due to error, dx_release() doesn't try to dereference uninitialized memory (which could happen also due to error in do_split()). Coverity-id: 741300 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-10-30jbd2: use a better hash function for the revoke tableTheodore Ts'o
The old hash function didn't work well for 64-bit block numbers, and used undefined (negative) shift right behavior. Use the generic 64-bit hash function instead. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com>
2014-10-30ext4: prevent bugon on race between write/fcntlDmitry Monakhov
O_DIRECT flags can be toggeled via fcntl(F_SETFL). But this value checked twice inside ext4_file_write_iter() and __generic_file_write() which result in BUG_ON inside ext4_direct_IO. Let's initialize iocb->private unconditionally. TESTCASE: xfstest:generic/036 https://patchwork.ozlabs.org/patch/402445/ #TYPICAL STACK TRACE: kernel BUG at fs/ext4/inode.c:2960! invalid opcode: 0000 [#1] SMP Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod CPU: 6 PID: 5505 Comm: aio-dio-fcntl-r Not tainted 3.17.0-rc2-00176-gff5c017 #161 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011 task: ffff88080e95a7c0 ti: ffff88080f908000 task.ti: ffff88080f908000 RIP: 0010:[<ffffffff811fabf2>] [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0 RSP: 0018:ffff88080f90bb58 EFLAGS: 00010246 RAX: 0000000000000400 RBX: ffff88080fdb2a28 RCX: 00000000a802c818 RDX: 0000040000080000 RSI: ffff88080d8aeb80 RDI: 0000000000000001 RBP: ffff88080f90bbc8 R08: 0000000000000000 R09: 0000000000001581 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88080d8aeb80 R13: ffff88080f90bbf8 R14: ffff88080fdb28c8 R15: ffff88080fdb2a28 FS: 00007f23b2055700(0000) GS:ffff880818400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f23b2045000 CR3: 000000080cedf000 CR4: 00000000000407e0 Stack: ffff88080f90bb98 0000000000000000 7ffffffffffffffe ffff88080fdb2c30 0000000000000200 0000000000000200 0000000000000001 0000000000000200 ffff88080f90bbc8 ffff88080fdb2c30 ffff88080f90be08 0000000000000200 Call Trace: [<ffffffff8112ca9d>] generic_file_direct_write+0xed/0x180 [<ffffffff8112f2b2>] __generic_file_write_iter+0x222/0x370 [<ffffffff811f495b>] ext4_file_write_iter+0x34b/0x400 [<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410 [<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410 [<ffffffff810990e5>] ? local_clock+0x25/0x30 [<ffffffff810abd94>] ? __lock_acquire+0x274/0x700 [<ffffffff811f4610>] ? ext4_unwritten_wait+0xb0/0xb0 [<ffffffff811bd756>] aio_run_iocb+0x286/0x410 [<ffffffff810990e5>] ? local_clock+0x25/0x30 [<ffffffff810ac359>] ? lock_release_holdtime+0x29/0x190 [<ffffffff811bc05b>] ? lookup_ioctx+0x4b/0xf0 [<ffffffff811bde3b>] do_io_submit+0x55b/0x740 [<ffffffff811bdcaa>] ? do_io_submit+0x3ca/0x740 [<ffffffff811be030>] SyS_io_submit+0x10/0x20 [<ffffffff815ce192>] system_call_fastpath+0x16/0x1b Code: 01 48 8b 80 f0 01 00 00 48 8b 18 49 8b 45 10 0f 85 f1 01 00 00 48 03 45 c8 48 3b 43 48 0f 8f e3 01 00 00 49 83 7c 24 18 00 75 04 <0f> 0b eb fe f0 ff 83 ec 01 00 00 49 8b 44 24 18 8b 00 85 c0 89 RIP [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0 RSP <ffff88080f90bb58> Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Cc: stable@vger.kernel.org
2014-10-30ext4: remove extent status procfs files if journal load failsDarrick J. Wong
If we can't load the journal, remove the procfs files for the extent status information file to avoid leaking resources. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-10-30ext4: disallow changing journal_csum option during remountDarrick J. Wong
ext4 does not permit changing the metadata or journal checksum feature flag while mounted. Until we decide to support that, don't allow a remount to change the journal_csum flag (right now we silently fail to change anything). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30ext4: enable journal checksum when metadata checksum feature enabledDarrick J. Wong
If metadata checksumming is turned on for the FS, we need to tell the journal to use checksumming too. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-10-30ext4: fix oops when loading block bitmap failedJan Kara
When we fail to load block bitmap in __ext4_new_inode() we will dereference NULL pointer in ext4_journal_get_write_access(). So check for error from ext4_read_block_bitmap(). Coverity-id: 989065 Cc: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30ext4: fix overflow when updating superblock backups after resizeJan Kara
When there are no meta block groups update_backups() will compute the backup block in 32-bit arithmetics thus possibly overflowing the block number and corrupting the filesystem. OTOH filesystems without meta block groups larger than 16 TB should be rare. Fix the problem by doing the counting in 64-bit arithmetics. Coverity-id: 741252 CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2014-10-30drm/i915/dp: only use training pattern 3 on platforms that support itJani Nikula
Ivybridge + 30" monitor prints a drm error on every modeset, since IVB doesn't support DP3 we should even bother trying to use it. This regression has been introduced in commit 06ea66b6bb445043dc25a9626254d5c130093199 Author: Todd Previte <tprevite@gmail.com> Date: Mon Jan 20 10:19:39 2014 -0700 drm/i915: Enable 5.4Ghz (HBR2) link rate for Displayport 1.2-capable devices Reported-by: Dave Airlie <airlied@redhat.com> Reference: http://mid.gmane.org/1414566170-9868-1-git-send-email-airlied@gmail.com Cc: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org (3.15+) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-10-30Merge branch '3.18/omapdss-fixes' into 3.18/fbdev-fixesTomi Valkeinen
2014-10-30omap: dss: connector-analog-tv: Add missing module device tableMarek Belisko
Without that fix connector-analog-tv driver isn't probed when compiled as module. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-10-30ixgbe: fix race when setting advertised speedEmil Tantilov
Following commands: modprobe ixgbe ifconfig ethX up ethtool -s ethX advertise 0x020 can lead to "setup link failed with code -14" error due to the setup_link call racing with the SFP detection routine in the watchdog. This patch resolves this issue by protecting the setup_link call with check for __IXGBE_IN_SFP_INIT. Reported-by: Scott Harrison <scoharr2@cisco.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-30ixgbe: need not repeat init skb with NULLJunwei Zhang
Signed-off-by: Martin Zhang <martinbj2008@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-30igb: don't reuse pages with pfmemalloc flagRoman Gushchin
Incoming packet is dropped silently by sk_filter(), if the skb was allocated from pfmemalloc reserves and the corresponding socket is not marked with the SOCK_MEMALLOC flag. Igb driver allocates pages for DMA with __skb_alloc_page(), which calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case of OOM condition, igb can get pages with pfmemalloc flag set. If an incoming packet hits the pfmemalloc page and is large enough (small packets are copying into the memory, allocated with netdev_alloc_skb_ip_align(), so they are not affected), it will be dropped. This behavior is ok under high memory pressure, but the problem is that the igb driver reuses these mapped pages. So, packets are still dropping even if all memory issues are gone and there is a plenty of free memory. In my case, some TCP sessions hang on a small percentage (< 0.1%) of machines days after OOMs. Fix this by avoiding reuse of such pages. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Tested-by: Aaron Brown "aaron.f.brown@intel.com" Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-30e1000: unset IFF_UNICAST_FLT on WMware 82545EMFrancesco Ruggeri
VMWare's e1000 implementation does not seem to support unicast filtering. This can be observed by configuring a macvlan interface on eth0 in a VM in VMWare Fusion 5.0.5, and trying to use that interface instead of eth0. Tested on 3.16. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-30[media] rc5-decoder: BZ#85721: Fix RC5-SZ decodingMauro Carvalho Chehab
Changeset e87b540be2dd broke RC5-SZ decoding, as it forgot to add the extra bit check for the enabled protocols at the beginning of the logic. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] rc-core: fix protocol_change regression in ir_raw_event_registerTomas Melin
IR receiver using nuvoton-cir and lirc required additional configuration steps after upgrade from kernel 3.16 to 3.17-rcX. Bisected regression to commit da6e162d6a4607362f8478c715c797d84d449f8b ("[media] rc-core: simplify sysfs code"). The regression comes from adding function change_protocol in ir-raw.c. It changes behaviour so that only the protocol enabled by driver's map_name will be active after registration. This breaks user space behaviour, lirc does not get key press signals anymore. Enable lirc protocol by default for ir raw decoders to restore original behaviour. Cc: stable@vger.kernel.org # for v3.17 Signed-off-by: Tomas Melin <tomas.melin@iki.fi> Acked-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30rbd: Fix error recovery in rbd_obj_read_sync()Jan Kara
When we fail to allocate page vector in rbd_obj_read_sync() we just basically ignore the problem and continue which will result in an oops later. Fix the problem by returning proper error. CC: Yehuda Sadeh <yehuda@inktank.com> CC: Sage Weil <sage@inktank.com> CC: ceph-devel@vger.kernel.org CC: stable@vger.kernel.org Coverity-id: 1226882 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-30libceph: use memalloc flags for net IOMike Christie
This patch has ceph's lib code use the memalloc flags. If the VM layer needs to write data out to free up memory to handle new allocation requests, the block layer must be able to make forward progress. To handle that requirement we use structs like mempools to reserve memory for objects like bios and requests. The problem is when we send/receive block layer requests over the network layer, net skb allocations can fail and the system can lock up. To solve this, the memalloc related flags were added. NBD, iSCSI and NFS uses these flags to tell the network/vm layer that it should use memory reserves to fullfill allcation requests for structs like skbs. I am running ceph in a bunch of VMs in my laptop, so this patch was not tested very harshly. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-30rbd: use a single workqueue for all devicesIlya Dryomov
Using one queue per device doesn't make much sense given that our workfn processes "devices" and not "requests". Switch to a single workqueue for all devices. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-30ALSA: hda/realtek - Update Initial AMP for EAPD controlKailang Yang
The default EAPD control uses verb command to control EAPD. Some codec does not have verb command for EAPD. It needs to control by hidden register. This update will avoid wrong behavior for some codec. This patch will fix double setup for EAPD. It just needs to turn on by one site for verb command or hidden register controlled. Detailed changes: - alc889_coef_init() is replaced with alc_update_coef_idx() with a correct COEF value. - for ALC262, ALC887 and ALC900, the EAPD setup via the hidden register is removed because this rather conflicts with the EAPD verb setup. - For ALC888-VC, also the hidden register access is removed in alc888_coef_init(). - Remove the dead #if 0 code for ALC267/ALC268. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: hda - change three SSID quirks to one pin quirkDavid Henningsson
These three HP machines all have the same pin config, so we can change it to a pin quirk. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: hda - Set GPIO 4 low for a few HP machinesDavid Henningsson
These HP machines needs GPIO 4 low to enable the headphone amplifier. In addition, we still need to control LEDs via vref and GPIO. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1387128 Tested-by: TienFu Chen <tienfu.chen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: hda - Add ultra dock support for Thinkpad X240.Lukas Bossard
Adding ultra doch support for Lenovo Thinkpad X240 (17aa:2214). [Actually replaced the entry with ALC292_FIXUP_TPT440_DOCK -- tiwai] Signed-off-by: Lukas Bossard <mr.bobukas@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30Merge branch 'urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull two RCU fixes from Paul E. McKenney: " - Complete the work of commit dd56af42bd82 (rcu: Eliminate deadlock between CPU hotplug and expedited grace periods), which was intended to allow synchronize_sched_expedited() to be safely used when holding locks acquired by CPU-hotplug notifiers. This commit makes the put_online_cpus() avoid the deadlock instead of just handling the get_online_cpus(). - Complete the work of commit 35ce7f29a44a (rcu: Create rcuo kthreads only for onlined CPUs), which was intended to allow RCU to avoid allocating unneeded kthreads on systems where the firmware says that there are more CPUs than are really present. This commit makes rcu_barrier() aware of the mismatch, so that it doesn't hang waiting for non-existent CPUs. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-30Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix report -F (abort, in_tx, mispredict, etc) segfaults for sample.data files without branch info (Jiri Olsa) - Add patch that should have went in a previous patchkit to use global cache provided by libunwind (Namhyung Kim) - Make CPUINFO_PROC an array to support different kernels, problem detected when the information reported via /proc/cpuinfo changed on ARM (Wang Nan) - 'perf probe' --demangle typo fix and a new --quiet option (Masami Hiramatsu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-30powerpc/fadump: Fix endianess issues in firmware assisted dump handlingHari Bathini
Firmware-assisted dump (fadump) kernel code is not endian safe. The below patch fixes this issue. Tested this patch with upstream kernel. Below output shows crash tool successfully opening LE fadump vmcore. # crash vmlinux vmcore GNU gdb (GDB) 7.6 This GDB was configured as "powerpc64le-unknown-linux-gnu"... KERNEL: vmlinux DUMPFILE: vmcore CPUS: 16 DATE: Wed Dec 31 19:00:00 1969 UPTIME: 00:03:28 LOAD AVERAGE: 0.46, 0.86, 0.41 TASKS: 268 NODENAME: linux-dhr2 RELEASE: 3.17.0-rc5-7-default VERSION: #6 SMP Tue Sep 30 01:06:34 EDT 2014 MACHINE: ppc64le (4116 Mhz) MEMORY: 40 GB PANIC: "Oops: Kernel access of bad area, sig: 11 [#1]" (check log for details) PID: 6223 COMMAND: "bash" TASK: c0000009661b2500 [THREAD_INFO: c000000967ac0000] CPU: 2 STATE: TASK_RUNNING (PANIC) Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> [mpe: Make the comment in pSeries_lpar_hptab_clear() clearer] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-29mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chipsDmitry Eremin-Solenikov
After '#echo mem > /sys/power/state' some devices can not be properly resumed because apparently the MTD Partition Configuration Register has been reset to default thus the rootfs cannot be mounted cleanly on resume. An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3 where the second step of the Sleep Shutdown Sequence is described: "An internal reset is applied to the SA-1100. All units are reset...". As workaround we refresh the PCR value as done initially on chip setup. This behavior and the fix are confirmed by our tests done on 2 different Zaurus collie units with kernel 3.17. Fixes: 812c5fa82bae: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR") Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29mtd: omap: fix mtd devices not showing upFrans Klaver
Since commit 6d178ef2fd5e ("mtd: nand: Move ELM driver and rename as omap_elm"), I don't have any mtd devices present on my am335x. This changes the link order of the omap_elm and omap2 objects, causing them to probe in the wrong order. To fix this, make elm_config defer probing until the omap_elm driver is actually loaded. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-30powerpc: Fix section mismatch warningFabian Frederick
Add __init to MMU_setup() which uses __initdata boot_command_line. Also MMU_setup() is only called from MMU_init(), which is also __init. Warning appeared since commit 3e47d1474c2b. Fixes: 3e47d1474c2b ("powerpc: Remove powerpc specific cmd_line") Signed-off-by: Fabian Frederick <fabf@skynet.be> [mpe: Update changelog] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-07-19 22:05:35 +0000