| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix race that causes a warning of corrupt ring buffer
With the change that allows to read the "trace" file without disabling
writing to the ring buffer, there was an integrity check of the ring
buffer in the iterator read code, that expected the ring buffer to be
write disabled. This caused the integrity check to trigger when stress
reading the "trace" file while writing was happening.
The integrity check is a bit aggressive (and has never triggered in
practice). Change it so that it checks just the integrity of the
linked pages without clearing the flags inside the pointers. This
removes the warning that was being triggered"
[ Heh. This was supposed to have gone in last week before the 6.2
release, but Steven forgot to actually add me to the participants of
the pull request, so here it is, a week later - Linus ]
* tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Handle race between rb_move_tail and rb_check_pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Use total duration to calculate average in rtla osnoise_hist
- Use 2 digit precision for displaying average
- Print an intuitive auto analysis of timerlat results
- Add auto analysis to timerlat top
- Add hwnoise, which is the same as osnoise but focuses on hardware
- Small clean ups
* tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation/rtla: Add hwnoise man page
rtla: Add hwnoise tool
Documentation/rtla: Add timerlat-top auto-analysis options
rtla/timerlat: Add auto-analysis support to timerlat top
rtla/timerlat: Add auto-analysis core
tools/tracing/rtla: osnoise_hist: display average with two-digit precision
tools/tracing/rtla: osnoise_hist: use total duration for average calculation
tools/rv: Remove unneeded semicolon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix three instances that the tty is not given back to the console on
exit. Forcing the user to do a "reset" to get the console back.
- Fix the console monitor to not hang when too much data is given by
the ssh output.
* tag 'ktest-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Restore stty setting at first in dodie
ktest.pl: Add RUN_TIMEOUT option with default unlimited
ktest.pl: Give back console on Ctrt^C on monitor
ktest.pl: Fix missing "end_monitor" when machine check fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit update from Shuah Khan:
- add Function Redirection API to isolate the code being tested from
other parts of the kernel.
Documentation/dev-tools/kunit/api/functionredirection.rst has the
details.
* tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Add printf attribute to fail_current_test_impl
lib/hashtable_test.c: add test for the hashtable structure
Documentation: Add Function Redirection API docs
kunit: Expose 'static stub' API to redirect functions
kunit: Add "hooks" to call into KUnit when it's built as a module
kunit: kunit.py extract handlers
tools/testing/kunit/kunit.py: remove redundant double check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest update from Shuah Khan:
- several patches to fix incorrect kernel headers search path from
Mathieu Desnoyers
- a few follow-on fixes found during testing the above change
- miscellaneous fixes
- support for filtering and enumerating tests
* tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits)
selftests/user_events: add a note about user_events.h dependency
selftests/mount_setattr: fix to make run_tests failure
selftests/mount_setattr: fix redefine struct mount_attr build error
selftests/sched: fix warn_unused_result build warns
selftests/ptp: Remove clean target from Makefile
selftests: use printf instead of echo -ne
selftests/ftrace: Fix bash specific "==" operator
selftests: tpm2: remove redundant ord()
selftests: find echo binary to use -ne options
selftests: Fix spelling mistake "allright" -> "all right"
selftests: tdx: Use installed kernel headers search path
selftests: ptrace: Use installed kernel headers search path
selftests: memfd: Use installed kernel headers search path
selftests: iommu: Use installed kernel headers search path
selftests: x86: Fix incorrect kernel headers search path
selftests: vm: Fix incorrect kernel headers search path
selftests: user_events: Fix incorrect kernel headers search path
selftests: sync: Fix incorrect kernel headers search path
selftests: seccomp: Fix incorrect kernel headers search path
selftests: sched: Fix incorrect kernel headers search path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Add s390 support
- Add support for the ARM Thumb1 instruction set
- Fix O_* flags definitions for open() and fcntl()
- Make errno a weak symbol instead of a static variable
- Export environ as a weak symbol
- Export _auxv as a weak symbol for auxilliary vector retrieval
- Implement getauxval() and getpagesize()
- Further improve self tests, including permitting userland testing of
the nolibc library
* tag 'nolibc.2023.02.06a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (28 commits)
selftests/nolibc: Add a "run-user" target to test the program in user land
selftests/nolibc: Support "x86_64" for arch name
selftests/nolibc: Add `getpagesize(2)` selftest
nolibc/sys: Implement `getpagesize(2)` function
nolibc/stdlib: Implement `getauxval(3)` function
tools/nolibc: add auxiliary vector retrieval for s390
tools/nolibc: add auxiliary vector retrieval for mips
tools/nolibc: add auxiliary vector retrieval for riscv
tools/nolibc: add auxiliary vector retrieval for arm
tools/nolibc: add auxiliary vector retrieval for arm64
tools/nolibc: add auxiliary vector retrieval for x86_64
tools/nolibc: add auxiliary vector retrieval for i386
tools/nolibc: export environ as a weak symbol on s390
tools/nolibc: export environ as a weak symbol on riscv
tools/nolibc: export environ as a weak symbol on mips
tools/nolibc: export environ as a weak symbol on arm
tools/nolibc: export environ as a weak symbol on arm64
tools/nolibc: export environ as a weak symbol on i386
tools/nolibc: export environ as a weak symbol on x86_64
tools/nolibc: make errno a weak symbol instead of a static one
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull x86 NMI diagnostics from Paul McKenney:
"Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs
on the one hand and failing hardware on the other"
* tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
x86/nmi: Print reasons why backtrace NMIs are ignored
x86/nmi: Accumulate NMI-progress evidence in exc_nmi()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull LKMM (Linux Kernel Memory Model) updates from Paul McKenney:
"Documentation updates.
Add read-modify-write sequences, which means that stronger primitives
more consistently result in stronger ordering, while still remaining
in the envelope of the hardware that supports Linux.
Address, data, and control dependencies used to ignore data that was
stored in temporaries. This update extends these dependency chains to
include unmarked intra-thread stores and loads. Note that these
unmarked stores and loads should not be concurrently accessed from
multiple threads, and doing so will cause LKMM to flag such accesses
as data races"
* tag 'lkmm.2023.02.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools: memory-model: Make plain accesses carry dependencies
Documentation: Fixed a typo in atomic_t.txt
tools: memory-model: Add rmw-sequences to the LKMM
locking/memory-barriers.txt: Improve documentation for writel() example
|
|
NAND core changes:
* Check the data only read pattern only once
* Prepare the late addition of supported operation checks
* Support for sequential cache reads
* Fix nand_chip kdoc
Raw NAND changes:
* Fsl_elbc: Propagate HW ECC settings to HW
* Marvell: Add missing layouts
* Pasemi: Don't use static data to track per-device state
* Sunxi:
- Fix the size of the last OOB region
- Remove an unnecessary check
- Remove an unnecessary check
- Clean up chips after failed init
- Precompute the ECC_CTL register value
- Embed sunxi_nand_hw_ecc by value
- Update OOB layout to match hardware
* tmio_nand: Remove driver
* vf610_nfc: Use regular comments for functions
SPI-NAND changes:
* Add support for AllianceMemory AS5F34G04SND
* Macronix: use scratch buffer for DMA operation
NAND ECC changes:
* Mediatek:
- Add ECC support fot MT7986 IC
- Add compatible for MT7986
- dt-bindings: Split ECC engine with rawnand controller
|
|
SPI NOR changes:
* small fixes on core and spansion driver.
|
|
Pull drm updates from Dave Airlie:
"There are a bunch of changes all over in the usual places.
Highlights:
- habanalabs moves from misc to accel
- first accel driver for Intel VPU (Versatile Processing Unit)
inference engine
- dropped all the ancient legacy DRI1 drivers. I think it's been at
least 10 years since anyone has heard about these.
- Intel DG2 updates and prelim Meteorlake enablement
- etnaviv adds support for Versilicon NPU device (a GPU like engine
with inference accelerators)
Detailed summary:
Removals:
- remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so that we
don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to
copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements"
* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
msm/fbdev: fix unused variable warning with clang.
drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
dma-buf: make kobj_type structure constant
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
drm/amd/display: disable SubVP + DRR to prevent underflow
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/pm: avoid unaligned access warnings
drm/amd/display: avoid unaligned access warnings
drm/amd/display: Remove duplicate/repeating expressions
drm/amd/display: Remove duplicate/repeating expression
drm/amd/display: Make variables declaration inside ifdef guard
drm/amd/display: Fix excess arguments on kernel-doc
drm/amd/display: Add previously missing includes
drm/amd/amdgpu: Add function prototypes to headers
drm/amd/display: Add function prototypes to headers
drm/amd/display: Turn global functions into static
drm/amd/display: remove unused _calculate_degamma_curve function
drm/amd/display: remove unused func declaration from resource headers
drm/amd/display: unset initial value for tf since it's never used
drm/amd/display: camel case cleanup in color_gamma file
...
|
|
Otherwise some configurations fail.
Fixes: 027726365906 ("clk: qcom: add the driver for the MSM8996 APCS clocks")
Link: https://lore.kernel.org/r/20230223013847.1218900-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull cifs client updates from Steve French:
"The largest subset of this is from David Howells et al: making the
cifs/smb3 driver pass iov_iters down to the lowest layers, directly to
the network transport rather than passing lists of pages around,
helping multiple areas:
- Pin user pages, thereby fixing the race between concurrent DIO read
and fork, where the pages containing the DIO read buffer may end up
belonging to the child process and not the parent - with the result
that the parent might not see the retrieved data.
- cifs shouldn't take refs on pages extracted from non-user-backed
iterators (eg. KVEC). With these changes, cifs will apply the
appropriate cleanup.
- Making it easier to transition to using folios in cifs rather than
pages by dealing with them through BVEC and XARRAY iterators.
- Allowing cifs to use the new splice function
The remainder are:
- fixes for stable, including various fixes for uninitialized memory,
wrong length field causing mount issue to very old servers,
important directory lease fixes and reconnect fixes
- cleanups (unused code removal, change one element array usage, and
a change form strtobool to kstrtobool, and Kconfig cleanups)
- SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes
- reconnect fixes
- multichannel fixes, including improving channel allocation (to
least used channel)
- remove the last use of lock_page_killable by moving to
folio_lock_killable"
* tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits)
update internal module version number for cifs.ko
cifs: update ip_addr for ses only for primary chan setup
cifs: use tcon allocation functions even for dummy tcon
cifs: use the least loaded channel for sending requests
cifs: DIO to/from KVEC-type iterators should now work
cifs: Remove unused code
cifs: Build the RDMA SGE list directly from an iterator
cifs: Change the I/O paths to use an iterator rather than a page list
cifs: Add a function to read into an iter from a socket
cifs: Add some helper functions
cifs: Add a function to Hash the contents of an iterator
cifs: Add a function to build an RDMA SGE list from an iterator
netfs: Add a function to extract an iterator into a scatterlist
netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator
cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE
splice: Export filemap/direct_splice_read()
iov_iter: Add a function to extract a page list from an iterator
iov_iter: Define flags to qualify page extraction.
splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE
splice: Add a func to do a splice from a buffered file without ITER_PIPE
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
Support for requesting the next power_off operation for a genpd to be
synchronous is introduced, and implemented in the GDSC driver. To allow
the GPU driver to request power_off to wait for the GDSC to actually
collapse.
Support for QDU1000/QRU1000 Global clock controller, SA8775P Global
clock controller, SM8550 TCSR and display clock controller, SM6350 clock
controller, nd MSM8996 CBF and APCS clock controllers is introduced.
Parent references are updated across a large number of clock drivers, to
align with the design changes since those drivers where introduced.
Similarly, test clocks has been dropped from a range of drivers.
A range of fixes for the MSM8996 CPU clock controller is introduced.
MSM8974 GCC is transitioned off the externally defined sleep_clk.
GDSC in the global clock controller for QCS404 is added, and various
parent definitions are cleaned up.
The SDCC core clocks on SM6115 are moved for floor_ops.
Programming of clk_dis_wait for GPU CX GDSC on SC7180 and SDM845 are
moved to use the recently introduced properties in the GDSC struct.
The RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock
is added on a variety of platforms.
The SMD RPM driver receives a big cleanup, in particular a move away
from duplicating declaration of identical clocks between multiple
platforms.
A few missing clocks across msm8998, msm8992, msm8916, qcs404 are added
as well.
Using devm_pm_runtime_enable() to clean up some duplication is done
across SM8250 display and video clock controllers, SM8450 display clock
controller and SC7280 LPASS clock controller.
Devicetree binding changes for above mentioned additions and changes are
introduced.
Support for postponing clk_disable_unused() until sync_state was
introduced, but later reverted again, awaiting an agreement on the
solution.
Lastly, a change to pad a few registers in the SM8250 DTS to 8 digits
was picked up in the wrong tree and kept here, to avoid rebasing.
* tag 'qcom-clk-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (142 commits)
clk: qcom: Revert sync_state based clk_disable_unused
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
clk: qcom: gcc-sa8775p: remove unused variables
clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform
clk: qcom: add msm8996 Core Bus Framework (CBF) support
dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller
clk: qcom: add the driver for the MSM8996 APCS clocks
clk: qcom: gcc-qcs404: fix duplicate initializer warning
clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
clk: qcom: cpu-8996: fix PLL clock ops
clk: qcom: cpu-8996: fix ACD initialization
clk: qcom: cpu-8996: fix PLL configuration sequence
clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
clk: qcom: cpu-8996: setup PLLs before registering clocks
clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
clk: qcom: cpu-8996: skip ACD init if the setup is valid
...
|
|
clang builds showed this:
drivers/gpu/drm/msm/msm_fbdev.c:144:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!fbdev)
^~~~~~
Fixes: 3fb1f62f80a1 ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()")
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
Fixes GEM SHMEM locking and generic fbdev hotplugging. Constifies
dma_buf kobj type.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/S6tu3gdQ0VizR+@linux-uq9g
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Convert the read and write paths to use folios
Bugfixes and Cleanups:
- Fix tracepoint state manager flag printing
- Fix disabling swap files
- Fix NFSv4 client identifier sysfs path in the documentation
- Don't clear NFS_CAP_COPY if server returns NFS4ERR_OFFLOAD_DENIED
- Treat GETDEVICEINFO errors as a layout failure
- Replace kmap_atomic() calls with kmap_local_page()
- Constify sunrpc sysfs kobj_type structures"
* tag 'nfs-for-6.3-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (25 commits)
fs/nfs: Replace kmap_atomic() with kmap_local_page() in dir.c
pNFS/filelayout: treat GETDEVICEINFO errors as layout failure
Documentation: Fix sysfs path for the NFSv4 client identifier
nfs42: do not fail with EIO if ssc returns NFS4ERR_OFFLOAD_DENIED
NFS: fix disabling of swap
SUNRPC: make kobj_type structures constant
nfs4trace: fix state manager flag printing
NFS: Remove unnecessary check in nfs_read_folio()
NFS: Improve tracing of nfs_wb_folio()
NFS: Enable tracing of nfs_invalidate_folio() and nfs_launder_folio()
NFS: fix up nfs_release_folio() to try to release the page
NFS: Clean up O_DIRECT request allocation
NFS: Fix up nfs_vm_page_mkwrite() for folios
NFS: Convert nfs_write_begin/end to use folios
NFS: Remove unused function nfs_wb_page()
NFS: Convert buffered writes to use folios
NFS: Convert the function nfs_wb_page() to use folios
NFS: Convert buffered reads to use folios
NFS: Add a helper nfs_wb_folio()
NFS: Convert the remaining pagelist helper functions to support folios
...
|
|
Pull nfsd updates from Chuck Lever:
"Two significant security enhancements are part of this release:
- NFSD's RPC header encoding and decoding, including RPCSEC GSS and
gssproxy header parsing, has been overhauled to make it more
memory-safe.
- Support for Kerberos AES-SHA2-based encryption types has been added
for both the NFS client and server. This provides a clean path for
deprecating and removing insecure encryption types based on DES and
SHA-1. AES-SHA2 is also FIPS-140 compliant, so that NFS with
Kerberos may now be used on systems with fips enabled.
In addition to these, NFSD is now able to handle crossing into an
auto-mounted mount point on an exported NFS mount. A number of fixes
have been made to NFSD's server-side copy implementation.
RPC metrics have been converted to per-CPU variables. This helps
reduce unnecessary cross-CPU and cross-node memory bus traffic, and
significantly reduces noise when KCSAN is enabled"
* tag 'nfsd-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (121 commits)
NFSD: Clean up nfsd_symlink()
NFSD: copy the whole verifier in nfsd_copy_write_verifier
nfsd: don't fsync nfsd_files on last close
SUNRPC: Fix occasional warning when destroying gss_krb5_enctypes
nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
NFSD: fix problems with cleanup on errors in nfsd4_copy
nfsd: fix race to check ls_layouts
nfsd: don't hand out delegation on setuid files being opened for write
SUNRPC: Remove ->xpo_secure_port()
SUNRPC: Clean up the svc_xprt_flags() macro
nfsd: remove fs/nfsd/fault_inject.c
NFSD: fix leaked reference count of nfsd4_ssc_umount_item
nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
nfsd: zero out pointers after putting nfsd_files on COPY setup error
SUNRPC: Fix whitespace damage in svcauth_unix.c
nfsd: eliminate __nfs4_get_fd
nfsd: add some kerneldoc comments for stateid preprocessing functions
nfsd: eliminate find_deleg_file_locked
nfsd: don't take nfsd4_copy ref for OP_OFFLOAD_STATUS
SUNRPC: Add encryption self-tests
...
|
|
Pull ksmbd server updates from Steve French:
- Fix for memory leak
- Two important fixes for frame length checks (which are also now
stricter)
- four minor cleanup fixes
- Fix to clarify ksmbd/Kconfig to indent properl
- Conversion of the channel list and rpc handle list to xarrays
* tag '6.3-rc-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix possible memory leak in smb2_lock()
ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length
ksmbd: fix wrong data area length for smb2 lock request
ksmbd: Fix parameter name and comment mismatch
ksmbd: Fix spelling mistake "excceed" -> "exceeded"
ksmbd: update Kconfig to note Kerberos support and fix indentation
ksmbd: Remove duplicated codes
ksmbd: fix typo, syncronous->synchronous
ksmbd: Implements sess->rpc_handle_list as xarray
ksmbd: Implements sess->ksmbd_chann_list as xarray
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs updates from Damien Le Moal:
- Reorganize zonefs code to split file related operations to a new
fs/zonefs/file.c file (me)
- Modify zonefs to use dynamically allocated inodes and dentries (using
the inode and dentry caches) instead of statically allocating
everything on mount. This saves a significant amount of memory for
very large zoned block devices with 10s of thousands of zones (me)
- Make zonefs_sb_ktype a const struct kobj_type (Thomas)
* tag 'zonefs-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: make kobj_type structure constant
zonefs: Cache zone group directory inodes
zonefs: Dynamically create file inodes when needed
zonefs: Separate zone information from inode information
zonefs: Reduce struct zonefs_inode_info size
zonefs: Simplify IO error handling
zonefs: Reorganize code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix a race when disassociating inodes from their glocks after
iget_failed()
- On filesystems with a block size smaller than the page size, make
sure that ->writepages() writes out all buffers of journaled inodes
- Various improvements to the way the delete workqueue is drained to
speed up unmount and prevent leftover inodes. At unmount time, evict
deleted inodes cooperatively across the cluster to avoid unnecessary
timeouts
- Various minor cleanups and fixes
* tag 'gfs2-v6.2-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Convert gfs2_page_add_databufs to folios
gfs2: jdata writepage fix
gfs2: Improve gfs2_make_fs_rw error handling
Revert "GFS2: free disk inode which is deleted by remote node -V2"
gfs2: Evict inodes cooperatively
gfs2: Flush delete work before shrinking inode cache
gfs2: Cease delete work during unmount
gfs2: Add SDF_DEACTIVATING super block flag
gfs2: check gl_object in rgrp glops
gfs2: Split the two kinds of glock "delete" work
gfs2: Move delete workqueue into super block
gfs2: Get rid of GLF_PENDING_DELETE flag
gfs2: Make glock lru list scanning safer
gfs2: Clean up gfs2_scan_glock_lru
gfs2: Improve gfs2_upgrade_iopen_glock comment
gfs2: gl_object races fix
|
|
Pull xfs updates from Darrick Wong:
"There's a couple of bug fixes, some cleanups for inconsistent variable
names and reduction of struct boxing and unboxing in the logging code.
More work is pending, which will begin reworking allocation group
lifetimes and finally replace confusing indirect calls to the
allocator with actual ... function calls. But I want to let that
experience another week of testing.
Summary:
- Eliminate repeated boxing and unboxing of log item parameters
- Clean up some confusing variable names in the log item code
- Fix a deadlock when doing unwritten extent conversion that causes a
bmbt split when there are sustained memory shortages and the worker
pool runs out of worker threads
- Fix the panic_mask debug knob not being able to trigger on verifier
errors
- Constify kobj_type objects"
* tag 'xfs-6.3-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: revert commit 8954c44ff477
xfs: make kobj_type structures constant
xfs: allow setting full range of panic tags
xfs: don't use BMBT btree split workers for IO completion
xfs: fix confusing variable names in xfs_refcount_item.c
xfs: pass refcount intent directly through the log intent code
xfs: fix confusing variable names in xfs_rmap_item.c
xfs: pass rmap space mapping directly through the log intent code
xfs: fix confusing xfs_extent_item variable names
xfs: pass xfs_extent_free_item directly through the log intent code
xfs: fix confusing variable names in xfs_bmap_item.c
xfs: pass the xfs_bmbt_irec directly through the log intent code
xfs: use strscpy() to instead of strncpy()
|
|
Pull iomap updates from Darrick Wong:
"This is mostly rearranging things to make life easier for gfs2,
nothing all that mindblowing for this release.
- Change when the iomap page_done function is called so that we still
have a locked folio in the success case. This fixes a writeback
race in gfs2
- Change when the iomap page_prepare function is called so that gfs2
can recover from OOM scenarios more gracefully
- Rename the iomap page_ops to folio_ops, since they operate on
folios now"
* tag 'iomap-6.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Rename page_ops to folio_ops
iomap: Rename page_prepare handler to get_folio
iomap: Add __iomap_get_folio helper
iomap/gfs2: Get page in page_prepare handler
iomap: Add iomap_get_folio helper
iomap: Rename page_done handler to put_folio
iomap/gfs2: Unlock and put folio in page_done handler
iomap: Add __iomap_put_folio helper
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).
The major core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
scsi: ufs: core: Fix device management cmd timeout flow
scsi: aic94xx: Add missing check for dma_map_single()
scsi: smartpqi: Replace one-element array with flexible-array member
scsi: mpt3sas: Fix a memory leak
scsi: qla2xxx: Remove the unused variable wwn
scsi: ufs: core: Fix kernel-doc syntax
scsi: ufs: core: Add hibernation callbacks
scsi: snic: Fix memory leak with using debugfs_lookup()
scsi: ufs: core: Limit DMA alignment check
scsi: Documentation: Correct spelling
scsi: Documentation: Correct spelling
scsi: target: Documentation: Correct spelling
scsi: aacraid: Allocate cmd_priv with scsicmd
scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
scsi: ufs: core: Enable DMA clustering
scsi: ufs: exynos: Fix the maximum segment size
scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA updates from Damien Le Moal:
- Small cleanup of the pata_octeon driver to drop a useless platform
callback (Uwe)
- Simplify ata_scsi_cmd_error_handler() code using the fact that
ap->ops->error_handler is NULL most of the time (Wenchao)
- Several patches improving libata error handling. This is in
preparation for supporting the command duration limits (CDL) feature.
The changes allow handling corner cases of ATA NCQ errors which do
not happen with regular drives but will be triggered with CDL drives
(Niklas)
- Simplify the qc_fill_rtf operation (me)
- Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES
command (me)
- Cleanup of libata FUA handling.
This falls short of enabling FUA for ATA drives that support it by
default as there were concerns that old drives would break. The
series however fixes several issues with the FUA support to ensure
that FUA is reported as being supported only for drives that can
handle all possible write cases (NCQ and non-NCQ). A check in the
block layer is also added to ensure that we never see read FUA
commands (current behavior) (me)
- Several patches to move the old PARIDE (parallel port IDE) driver to
libata as pata_parport. Given that this driver also needs protocol
modules, the driver code resides in its own pata_parport directoy
under drivers/ata (Ondrej)
* tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: Fix ida_alloc return value error check
drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport
drivers/block: Remove PARIDE core and high-level protocols
ata: pata_parport: add driver (PARIDE replacement)
ata: libata: exclude FUA support for known buggy drives
ata: libata: Fix FUA handling in ata_build_rw_tf()
ata: libata: cleanup fua support detection
ata: libata: Rename and cleanup ata_rwcmd_protocol()
ata: libata: Introduce ata_ncq_supported()
block: add a sanity check for non-write flush/fua bios
ata: libata-scsi: improve ata_scsiop_maint_in()
ata: libata-scsi: do not overwrite SCSI ML and status bytes
ata: libata: move NCQ related ATA_DFLAGs
ata: libata: respect successfully completed commands during errors
ata: libata: read the shared status for successful NCQ commands once
ata: libata: simplify qc_fill_rtf port operation interface
ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH
ata: libata-eh: Cleanup ata_scsi_cmd_error_handler()
ata: octeon: Drop empty platform remove function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM cache target to free background tracker work items, otherwise
slab BUG will occur when kmem_cache_destroy() is called.
- Improve 2 of DM's shrinker names to reflect their use.
- Fix the DM flakey target to not corrupt the zero page. Fix dm-flakey
on 32-bit hughmem systems by using bvec_kmap_local instead of
page_address. Also, fix logic used when imposing the
"corrupt_bio_byte" feature.
- Stop using WQ_UNBOUND for DM verity target's verify_wq because it
causes significant Android latencies on ARM64 (and doesn't show real
benefit on other architectures).
- Add negative check to catch simple case of a DM table referencing
itself. More complex scenarios that use intermediate devices to
self-reference still need to be avoided/handled in userspace.
- Fix DM core's resize to only send one uevent instead of two. This
fixes a race with udev, that if udev wins, will cause udev to miss
uevents (which caused premature unmount attempts by systemd).
- Add cond_resched() to workqueue functions in DM core, dn-thin and
dm-cache so that their loops aren't the cause of unintended cpu
scheduling fairness issues.
- Fix all of DM's checkpatch errors and warnings (famous last words).
Various other small cleanups.
* tag 'for-6.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
dm: remove unnecessary (void*) conversion in event_callback()
dm ioctl: remove unnecessary check when using dm_get_mdptr()
dm ioctl: assert _hash_lock is held in __hash_remove
dm cache: add cond_resched() to various workqueue loops
dm thin: add cond_resched() to various workqueue loops
dm: add cond_resched() to dm_wq_requeue_work()
dm: add cond_resched() to dm_wq_work()
dm sysfs: make kobj_type structure constant
dm: update targets using system workqueues to use a local workqueue
dm: remove flush_scheduled_work() during local_exit()
dm clone: prefer kvmalloc_array()
dm: declare variables static when sensible
dm: fix suspect indent whitespace
dm ioctl: prefer strscpy() instead of strlcpy()
dm: avoid void function return statements
dm integrity: change macros min/max() -> min_t/max_t where appropriate
dm: fix use of sizeof() macro
dm: avoid 'do {} while(0)' loop in single statement macros
dm log: avoid multiple line dereference
dm log: avoid trailing semicolon in macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit update from Paul Moore:
"Just a single audit patch, and even that patch is pretty trivial as it
only updates the mailing list entry in the MAINTAINERS file"
* tag 'audit-pr-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: update the mailing list in MAINTAINERS
|
|
Pull smack update from Casey Schaufler:
"One fix for resetting CIPSO labeling"
* tag 'Smack-for-6.3' of https://github.com/cschaufler/smack-next:
smackfs: Added check catlen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This improves documentation, and makes some tests more flexible to be
able to run on systems without overlayfs or with Yama restrictions"
* tag 'landlock-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
MAINTAINERS: Update Landlock repository
selftests/landlock: Test ptrace as much as possible with Yama
selftests/landlock: Skip overlayfs tests when not supported
landlock: Explain file descriptor access rights
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity update from Mimi Zohar:
"One doc and one code cleanup, and two bug fixes"
* tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Introduce MMAP_CHECK_REQPROT hook
ima: Align ima_file_mmap() parameters with mmap_file LSM hook
evm: call dump_security_xattr() in all cases to remove code duplication
ima: fix ima_delete_rules() kernel-doc warning
ima: return IMA digest value only when IMA_COLLECTED flag is set
ima: fix error handling logic when file measurement failed
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
|
|
- Drop bogus kernel-doc marker in pci_endpoint_test.c (Randy Dunlap)
- Fix epf_ntb_mw_bar_clear() kernel-doc (Yang Yingliang)
- Constify struct kobj_type pci_slot_ktype (Thomas Weißschuh)
* pci/misc:
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc
misc: pci_endpoint_test: Drop initial kernel-doc marker
|
|
- Add pci_enable_link_state() to allow drivers to enable ASPM link state
(Michael Bottini)
- Add quirk to enable all ASPM link states and program LTR for devices
below VMD (David E. Box)
* pci/controller/vmd:
PCI: vmd: Add quirk to configure PCIe ASPM and LTR
PCI: vmd: Create feature grouping for client products
PCI: vmd: Use PCI_VDEVICE in device list
PCI/ASPM: Add pci_enable_link_state()
|
|
- Clean up uniphier-ep reg, clocks, resets, and their names (Kunihiko
Hayashi)
* pci/controller/uniphier:
dt-bindings: PCI: uniphier-ep: Clean up reg, clocks, resets, and their names
|
|
- Return -EFAULT instead of unrelated codes for copy_to_user() errors
(Bjorn Helgaas)
* pci/controller/switchtec:
PCI: switchtec: Return -EFAULT for copy_to_user() errors
PCI: switchtec: Simplify switchtec_dma_mrpc_isr()
|
|
- Add DT compatible for qcom MSM8998 (Krzysztof Kozlowski)
- Unify qcom MSM8996 and MSM8998 clock orderings (Krzysztof Kozlowski)
- Correct qcom,perst-regs (Krzysztof Kozlowski)
- Add qcom SM8350 DT binding and driver support (Dmitry Baryshkov)
- Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and
clocks are disabled on late host-init errors (Johan Hovold)
- Add IPQ8074 Gen3 port DT binding and driver support (the Gen2 port was
already supported) (Robert Marko)
* pci/controller/qcom:
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
dt-bindings: PCI: qcom: Add MSM8998 specific compatible
dt-bindings: PCI: qcom: Add oneOf to compatible match
|
|
- Mark mvebu driver as broken (Pali Rohár)
* pci/controller/mvebu:
PCI: mvebu: Mark driver as BROKEN
|
|
- Delay PHY initialization to make boots reliable for ZBT WE1326 and ZBT
WF3526-P and some Netgear models (Sergio Paracuellos)
* pci/controller/mt7621:
PCI: mt7621: Delay phy ports initialization
|
|
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support
(Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Add i.MX8MP PCIe EP support
PCI: imx6: Add i.MX8MM PCIe EP support
PCI: imx6: Add i.MX8MQ PCIe EP support
PCI: imx6: Add i.MX PCIe EP mode support
misc: pci_endpoint_test: Add i.MX8 PCIe EP device support
dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode compatible string
dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode compatible string
dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode compatible string
|
|
- Release previously-requested DW eDMA IRQs if request_irq() fails (Serge
Semin)
- Convert DW eDMA linked-list (ll) and data target (dt) from CPU-relative
addresses to PCI bus addresses (Serge Semin)
- Fix missing src/dst address for interleaved transfers (Serge Semin)
- Enforce the DW eDMA restriction that interleaved transfers must increment
src and dst addresses (Serge Semin)
- Fix some invalid interleaved transfer semantics (Serge Semin)
- Convert CPU-relative addresses to PCI bus addresses for eDMA engine
(Serge Semin)
- Drop chancnt initialization from dw-edma-core, since it is managed by the
dmaengine core, e.g., in dma_async_device_channel_register() (Serge Semin)
- Clean up bogus casting of debugfs_entries.reg addresses (Serge Semin)
- Ignore debugfs file/directory creation errors (Serge Semin)
- Allocate debugfs entries from the heap to prepare for multi-eDMA
platforms (Serge Semin)
- Simplify and rework register accessors to remove another obstacle to
multi-eDMA platforms (Serge Semin)
- Consolidate eDMA read/write channels in a single dma_device to simplify,
better reflect the hardware design, and avoid a debugfs complaint (Serge
Semin)
- Move eDMA-specific debugfs nodes into existing dmaengine subdirectory
(Serge Semin)
- Fix a readq_ch() truncation from 64 to 32 bits (Serge Semin)
- Use existing readq()/writeq rather than hand-coding new ones (Serge
Semin)
- Drop unnecessary data target region allocation in favor of existing
dw_edma_chip members (Serge Semin)
- Use parent device in eDMA controller name to prepare for multi-eDMA
platforms (Serge Semin)
- In addition to the existing MMIO accessors for linked list entries, add
support for ioremapped entries for use by eDMA in Root Ports or local
Endpoints (Serge Semin)
- Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it
(Serge Semin)
- Allow DWC drivers to set streaming DMA masks larger than 32 bits;
previously both streaming and coherent DMA were limited to 32 bits
because some PCI devices only support coherent 32-bit DMA for MSI (Serge
Semin)
- Set 64-bit streaming and coherent DMA mask for the bt1 driver (Serge
Semin)
- Add DW Root Port and Endpoint controller support for eDMA (Serge Semin)
* pci/controller/dwc:
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
dmaengine: dw-edma: Skip cleanup procedure if no private data found
dmaengine: dw-edma: Replace chip ID number with device name
dmaengine: dw-edma: Drop DT-region allocation
dmaengine: dw-edma: Use non-atomic io-64 methods
dmaengine: dw-edma: Fix readq_ch() return value truncation
dmaengine: dw-edma: Use DMA engine device debugfs subdirectory
dmaengine: dw-edma: Join read/write channels into a single device
dmaengine: dw-edma: Move eDMA data pointer to debugfs node descriptor
dmaengine: dw-edma: Simplify debugfs context CSRs init procedure
dmaengine: dw-edma: Rename debugfs dentry variables to 'dent'
dmaengine: dw-edma: Convert debugfs descs to being heap-allocated
dmaengine: dw-edma: Add dw_edma prefix to debugfs nodes descriptor
dmaengine: dw-edma: Stop checking debugfs_create_*() return value
dmaengine: dw-edma: Drop unnecessary debugfs reg casts
dmaengine: dw-edma: Drop chancnt initialization
dmaengine: dw-edma: Add PCI bus address getter to the remote EP glue driver
dmaengine: dw-edma: Add CPU to PCI bus address translation
dmaengine: dw-edma: Fix invalid interleaved xfers semantics
dmaengine: dw-edma: Don't permit non-inc interleaved xfers
dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
dmaengine: dw-edma: Convert ll/dt phys address to PCI bus/DMA address
dmaengine: dw-edma: Release requested IRQs on failure
dmaengine: Fix dma_slave_config.dst_addr description
|
|
- Convert dra7xx to threaded IRQ handler (Manivannan Sadhasivam)
- Move tegra194 dw_pcie_ep_linkup() to threaded IRQ handler (Manivannan
Sadhasivam)
- Add a separate lock for the endpoint pci_epf list to avoid deadlock
while running callbacks (Manivannan Sadhasivam)
- Use callbacks instead of notifier chains to signal events from EPC to EPF
drivers (Manivannan Sadhasivam)
- Use link_up() callback in place of LINK_UP notifier (Manivannan
Sadhasivam)
* pci/endpoint:
PCI: endpoint: Use link_up() callback in place of LINK_UP notifier
PCI: endpoint: Use callback mechanism for passing events from EPC to EPF
PCI: endpoint: Use a separate lock for protecting epc->pci_epf list
PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handler
PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ
|
|
- Avoid FLR for AMD FCH AHCI adapters to avoid a hardware defect (Damien Le
Moal)
- Add ACS quirk for Wangxun NICs that don't allow peer-to-peer between
functions, but don't advertise an ACS Capability (Mengyuan Lou)
* pci/virtualization:
PCI: Add ACS quirk for Wangxun NICs
PCI: Avoid FLR for AMD FCH AHCI adapters
|
|
- Realign space as required by bridge windows after dividing it up (Mika
Westerberg)
- Account for space required by other devices on the bus before
distributing it all to bridges (Mika Westerberg)
- Distribute spare resources to root bus devices as well as to other
hotplug bridges (Mika Westerberg)
- Fix bug that dropped root bus resources that end at zero, e.g., a host
bridge that leads only to bus 00 (Geert Uytterhoeven)
* pci/resource:
PCI: Fix dropping valid root bus resources with .end = zero
PCI: Distribute available resources for root buses, too
PCI: Take other bus devices into account when distributing resources
PCI: Align extra resources for hotplug bridges properly
|
|
- Always observe reset delay when waking devices from D3cold, e.g., after
system sleep, regardless of whether we're allowed to runtime-suspend to
D3cold (Lukas Wunner)
- Unify reset and resume delays to wait for downstream devices after a
bridge reset (Lukas Wunner)
- Wait for downstream devices after a DPC-induced bridge reset (Lukas
Wunner)
* pci/reset:
PCI/DPC: Await readiness of secondary bus after reset
PCI: Unify delay handling for reset and resume
PCI/PM: Observe reset delay irrespective of bridge_d3
|
|
- Account for _S0W when deciding whether to put bridges in D3 to avoid
missing hotplug events (Rafael J. Wysocki)
* pci/pm:
PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3()
|
|
- Annotate RCU dereference (Logan Gunthorpe)
* pci/p2pdma:
PCI/P2PDMA: Annotate RCU dereference
|
|
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe will complain about them (Nick Alcock)
* pci/kbuild:
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
|
|
- Enlarge virtfn sysfs name buffer to prevent buffer overflow (Alexey V.
Vissarionov)
* pci/iov:
PCI/IOV: Enlarge virtfn sysfs name buffer
|
|
- Add quirk to work around Qualcomm hardware defect in Command Completed
signaling (Manivannan Sadhasivam)
- Remove locking to allow devices to be marked as disconnected immediately
instead of waiting for concurrent bind/unbind to complete (Lukas Wunner)
* pci/hotplug:
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
|
|
- Implement portdrv .shutdown() method that calls service driver .remove()
methods (which disables interrupt generation as required by .shutdown()),
but doesn't disable bus mastering (which hangs on Loongson LS7A because
of a hardware defect) (Huacai Chen)
- Prevent MRRS increases for devices below Loongson LS7A to avoid hardware
limitations (Huacai Chen)
- Ignore devices with a firmware (DT/ACPI) node that says the device is
disabled (Rob Herring)
* pci/enumeration:
PCI: Honor firmware's device disabled status
PCI: loongson: Add more devices that need MRRS quirk
PCI: loongson: Prevent LS7A MRRS increases
PCI/portdrv: Prevent LS7A Bus Master clearing on shutdown
|
