summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-05Merge tag 'kconfig-cleanup-for-3.15' into imx/socShawn Guo
- Remove common kconfig options required by multi-platform builds out of individual platforms as they are redundant. - Make SMP, CACHE_L2X0 and GPIO config options user visible on multi-platform builds as most platforms enable these options and all platforms can run with them enabled. - Make multi-platform v6 default to more optimal v6k rather than v6 - Remove the last bit of mach-virt and convert it to just a kconfig option. Conflicts: arch/arm/mach-omap2/Kconfig
2014-03-01ARM: rockchip: add smp bringup codeHeiko Stuebner
This adds the necessary smp-operations and startup code to use additional cores on Rockchip SoCs. We currently hog the power management unit in the smp code, as it is necessary to control the power to the cpu core and nothing else is currently using it, so a generic implementation can be done later. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
2014-03-01ARM: rockchip: add power-management-unitHeiko Stuebner
The pmu is needed to bring up the cores during smp operations and later also other system parts. Therefore add a node and documentation for it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
2014-03-01ARM: rockchip: add sram dt nodes and documentationHeiko Stuebner
Add dt-nodes for the sram on rk3066 and rk3188 including the reserved section needed for smp bringup. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
2014-03-01ARM: rockchip: add snoop-control-unitHeiko Stuebner
This adds the device-node and config select to enable the scu in all Rockchip Cortex-A9 SoCs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
2014-03-01Merge branch 'mvebu/soc-kw' into mvebu/socJason Cooper
2014-03-01Merge branch 'mvebu/soc-3xx' into mvebu/socJason Cooper
2014-02-28Merge tag 'for-v3.15/omap-hwmod-clk-prcm-a' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.15/prcm Some low-level optimizations and fixes that don't belong in an -rc series for various OMAP-family chips, targeted for v3.15. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/prcm-a-for-v3.15/20140228124518/
2014-02-28ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAFPaul Bolle
The Kconfig symbols OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF were added in v2.6.36. They have never been used. Setting them has no effect. These symbols can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [tony@atomide.com: updated to remove also the related mux.h entries] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: OMAP2+: AM43x: Use gptimer as clocksourceRajendra Nayak
The SyncTimer in AM43x is clocked using the following two sources: 1) An inaccuarte 32k clock (CLK_32KHZ) derived from PER DPLL, causing system time to go slowly (~10% deviation). 2) external 32KHz RTC clock, which may not always be available on board like in the case of ePOS EVM Use gptimer as clocksource instead, as is done in the case of AM335x (which does not have a SyncTimer). With this, system time keeping works accurately. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: OMAP2+: AM43x: determine featuresAfzal Mohammed
Determine AM43x device features by reusing AM335x helper as feature register layout is similar. And also exporting AM43xx family name. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: OMAP2+: AM43x: Add ID for ES1.1Lokesh Vutla
Adding ID for AM437x ES1.1 silicon. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: OMAP2+: AM43x: enable in default configAfzal Mohammed
Enable AM43x SoC in omap2plus_defconfig Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: OMAP3+: DPLL: stop reparenting to same parent if already doneNishanth Menon
omap3_noncore_dpll_set_rate forces a reparent to the same clk_ref for every call that takes place. This is an can be done only if a change is detected. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-02-28ARM: OMAP2+: clock: fix rate printsTomi Valkeinen
Printing with unsigned long rates with %ld gives wrong result if the rate is high enough. Fix this by using %lu. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-02-28ARM: AM43x: hwmod data: register spinlock OCP interfaceSuman Anna
AM43xx has a spinlock module which is identical to the one present on AM33xx. Register the spinlock ocp_if link so that the spinlock hwmod and associated omap_device can be instantiated, and the runtime pm API could be used by the OMAP hwspinlock driver. Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-02-28ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP SupportDave Gerlach
Since commit 65aa94b204d (ARM: OMAP4: clockdomain/CM code: Update supported transition modes), on OMAP4, all CLKDMs support HW_AUTO so this is used instead of SW_SLEEP for the idling of clockdomains. However, additional SoCs now leverage the OMAP4 clockdomain code so update it to use SW_SLEEP if the clockdomain data specifies that the CLKDM has the CLKDM_CAN_FORCE_SLEEP flag set rather than using HW_AUTO for both cases. Without this patch, clockdomain handling is broken on AM43xx and no clockdomains are actually being put into idle on this platform. Any attempt to idle them results in the HW_AUTO value (0x3) being written to them with no apparent effect. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [paul@pwsan.com: added extra explanatory text from patch set intro] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-02-28ARM: OMAP2+: AM43xx: implement support for machine restartLokesh Vutla
Add restart hook so that AM4372 builds can restart the platform. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-02-28ARM: clps711x: Migrate CLPS711X subarch to the new irqchip driverAlexander Shiyan
This patch remove old code and migrate Cirrus Logic CLPS711X subarch to the new irqchip driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-28ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driverAlexander Shiyan
Add OF document for Cirrus Logic CLPS711X irqchip driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org>
2014-02-28ARM: clps711x: Add CLPS711X irqchip driverAlexander Shiyan
This adds the irqchip driver for Cirrus Logic CLPS711X series SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-26ARM: shmobile: Move SYSC base variable to inside ifdefsMagnus Damm
Move the rcar_sysc_base variable to inside #ifdefs to avoid triggering build warnings in case PM or SMP is not selected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-25ARM: kirkwood: Add HP T5325 thin clientAndrew Lunn
Convert the kirkwood t5325-setup.c to mostly device tree for mach-mvebu. Part of the audio setup needs to remain in C for the moment until suitable bindings are designed and implemented. So add board code, triggered by the compatibility string. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-25ARM: kirkwood: select dtbs based on SoCJason Cooper
To prevent problems later with mvebu_v5_defconfig builds, we restrict the scope of the changes this series makes. Selecting ARCH_KIRKWOOD and MACH_KIRKWOOD is necessary during the migration from mach-kirkwood to mach-mvebu. Until the last four legacy kirkwood board files have a DT equivalent, we need to support building DT from both mach-kirkwood and mach-mvebu. Reported-by: Kevin Hilman <khilman@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-25Merge tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/soc Merge "mvebu new SoCs for v3.15" from Jason Cooper: - mvebu - initial support for Armada 375, 380, and 385 Depends: - tags/mvebu-soc-3.15 (resolves delete/rename hidden conflict) * tag 'mvebu-soc-3xx-3.15' of git://git.infradead.org/linux-mvebu: Documentation: arm: update Marvell documentation about Armada 375/38x ARM: mvebu: add initial support for the Armada 380/385 SOCs ARM: mvebu: add workaround for data abort issue on Armada 375 ARM: mvebu: add initial support for the Armada 375 SOCs ARM: mvebu: add Armada 375 support to the system-controller driver ARM: mvebu: make CPU_PJ4B selection a per-SoC choice ARM: mvebu: rename DT machine structure for Armada 370/XP ARM: mvebu: rename armada-370-xp.c to board-v7.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-25Merge branch 'mvebu/soc' into next/socArnd Bergmann
Merge dependency for mvebu-soc-3xx branch from cleanups. * mvebu/soc: ARM: mvebu: remove unneeded ->map_io field for Armada 370/XP ARM: mvebu: make use of of_find_matching_node_and_match ARM: mvebu: Makefile clean-up Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-24ARM: kirkwood: Remove redundant kexec codeAndrew Lunn
The PCIe driver has been fully clock aware for quite a while. Remove the kexec code to enable the PCIe clock, since the PCIe driver will do the right thing. jac adds: [arnd]: fixes a build error when KEXEC is enabled and KIRKWOOD_LEGACY is not Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-24ARM: mvebu: Armada 375/38x depend on MULTI_V7Jason Cooper
During this release cycle, we're adding the new Armada 375, 380, and 385 SoCs. We're also migrating DT kirkwood boards into mach-mvebu. The kirkwood changes make the different SoCs in mach-mvebu/ depend on MULTI_V7 or MULTI_V5 as appropriate. We add this dependency to the new SoCs so that when the branches are merged, everything is as it should be. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-23Linux 3.14-rc4Linus Torvalds
2014-02-23Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes for ARM platforms. Most are fixes for DTS files, mostly from DT conversion on OMAP which is still finding a few issues here and there. There's a couple of small stale code removal patches that we usually queue for the next release instead, but they seemed harmless enough to bring in now. Also, a fix for backlight on some PXA platforms, and a cache configuration fix for Tegra, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer ARM: tegra: only run PL310 init on systems with one ARM: tegra: Add head numbers to display controllers ARM: imx6: build pm-imx6q.c independently of CONFIG_PM ARM: tegra: fix RTC0 alias for Cardhu ARM: dove: dt: revert PMU interrupt controller node Documentation: dt: OMAP: Update Overo/Tobi ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi ARM: dts: omap3-tobi: Use the correct vendor prefix ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo ARM: OMAP2+: Remove legacy macros for zoom platforms ARM: OMAP2+: Remove MACH_NOKIA_N800 ARM: dts: N900: add missing compatible property ARM: dts: N9/N950: fix boot hang with 3.14-rc1 ARM: OMAP1: nokia770: enable tahvo-usb ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module ARM: dts: omap3-gta04: Fix mmc1 properties. ARM: dts: omap3-gta04: Fix 'aux' gpio key flags. ARM: OMAP2+: add missing ARCH_HAS_OPP ...
2014-02-23Merge tag 'regulator-v3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Mostly unexciting driver fixes, plus one fix to lower the severity of the log message when we don't use an optional regulator - the fixes for ACPI system made this come up more often and it was correctly observed that it was causing undue concern for users" * tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: max14577: Fix invalid return value on DT parse success regulator: core: Change dummy supplies error message to a warning regulator: s5m8767: Add missing of_node_put regulator: s5m8767: Use of_get_child_by_name regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
2014-02-24ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()Magnus Damm
Remove __init from rcar_gen2_read_mode_pins() to allow it to be used after boot. For instance the R-Car Gen2 MD21 check is needed even in the case of CPU Hotplug. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-24ARM: shmobile: r8a7790 CA15-SCU enablementKeita Kobayashi
Power on CA15 SCU in case of booting from a CA7 core. Signed-off-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> [damm@opensource.se: Converted to use broken out SYSC code] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-24ARM: shmobile: r8a7790 CA7-SCU enablementGaku Inami
Power on CA7 SCU in case of booting from a CA15 core. Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> [damm@opensource.se: Converted to use broken out SYSC code] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-24ARM: shmobile: r8a7790 SYSC setup codeHisashi Nakamura
Add r8a7790 SYSC power management support. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Converted to use broken out SYSC code] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-24ARM: shmobile: Break out R-Car SYSC PM codeMagnus Damm
Break out the R-Car SYSC power management code from the r8a7779 SoC code. With this new shared R-Car SYSC code base it is possible to hook in Generation 2 SoCs as well. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-24ARM: shmobile: Use 64-bit dma_addr_t on r8a7790/r8a7791Magnus Damm
Some on-chip devices on r8a7790 and r8a7791 can do bus mastering and access more than 32-bits of address space. Select ARCH_DMA_ADDR_T_64BIT when LPAE is set in case of multiplatform and legacy SoC support. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-23Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Serialize the registration of a new sched_clock in the currently ARM only generic sched_clock facilty to avoid sched_clock havoc" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched_clock: Prevent callers from seeing half-updated data
2014-02-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - a bugfix which prevents a divide by 0 panic when the newly introduced try_msr_calibrate_tsc() fails - enablement of the Baytrail platform to utilize the newfangled msr based calibration * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: tsc: Add missing Baytrail frequency to the table x86, tsc: Fallback to normal calibration if fast MSR calibration fails
2014-02-23Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Another four fixlets to tame the ARM orion irq chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: orion: Fix getting generic chip pointer. irqchip: orion: clear stale interrupts in irq_startup irqchip: orion: use handle_edge_irq on bridge irqs irqchip: orion: clear bridge cause register on init
2014-02-23Merge tag 'usb-3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes for reported issues for 3.14-rc4 The majority of these are for USB gadget, phy, and musb driver issues. And there's a few new device ids thrown in for good measure" * tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: need to mask when writting endptflush and endptprime usb: musb: correct use of schedule_delayed_work() usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP usb: gadget: fix NULL pointer dereference usb: gadget: printer: using gadget_is_otg to check otg support at runtime phy: let phy_provider_register be the last step in registering PHY phy-core: Don't allow building phy-core as a module phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller phy-core: phy_get: Leave error logging to the caller phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM usb: musb: correct use of schedule_delayed_work() usb: musb: do not sleep in atomic context USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8 USB: EHCI: add delay during suspend to prevent erroneous wakeups usb: gadget: bcm63xx_udc: fix build failure on DMA channel code usb: musb: do not sleep in atomic context usb: gadget: s3c2410_udc: Fix build error usb: musb: core: Fix remote-wakeup resume usb: musb: host: Fix SuperSpeed hub enumeration usb: musb: fix obex in g_nokia.ko causing kernel panic
2014-02-23Merge tag 'tty-3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY revert from Greg KH: "Here is a single commit, a revert of a sysfs file change that ended up breaking a userspace tool" * tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: Set correct tty name in 'active' sysfs attribute"
2014-02-23Merge tag 'staging-3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fix from Greg KH: "Here is a single android driver fix for 3.14-rc4 that fixes a reported problem in the binder driver" * tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: binder: Fix death notifications
2014-02-23Merge tag 'char-misc-3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single commit, to fix a reported problem in the mei driver" * tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: set client's read_cb to NULL when flow control fails
2014-02-23MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainerMatt Porter
Add myself as an additional maintainer for the Broadcom mobile SoCs. Signed-off-by: Matt Porter <mporter@linaro.org> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-23Merge remote-tracking branches 'regulator/fix/da9063', ↵Mark Brown
'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
2014-02-23Merge remote-tracking branch 'regulator/fix/core' into regulator-linusMark Brown
2014-02-22Revert "tty: Set correct tty name in 'active' sysfs attribute"Greg Kroah-Hartman
This reverts commit d8a5dc3033af2fd6d16030d2ee4fbd073460fe54. This breaks plymouth installs, either because plymouth is using the file "incorrectly" or because the patch is incorrect. Either way, this needs to be reverted until it is all figured out. Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: Ray Strode <halfline@gmail.com> Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Werner Fink <werner@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ARM: mvebu: Simplify headers and make localAndrew Lunn
kirkwood is very nearly fully DT. Remove most of the address definitions from the header files and make it a local header file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22ARM: mvebu: Enable mvebu-soc-id on KirkwoodAndrew Lunn
Add the Kirkwood PCIe compatibility string to mvebu-soc-id, so that it can get the SoC ID and revision from the PCIe endpoints. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit (git 2.34.1) at 2025-07-15 16:29:44 +0000