summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-17mptcp: fix integer overflow in mptcp_subflow_discard_data()Paolo Abeni
Christoph reported an infinite loop in the subflow receive path under stress condition. If there are multiple subflows, each of them using a large send buffer, the delta between the sequence number used by MPTCP-level retransmission can and the current msk->ack_seq can be greater than MAX_INT. In the above scenario, when calling mptcp_subflow_discard_data(), such delta will be truncated to int, and could result in a negative number: no bytes will be dropped, and subflow_check_data_avail() will try again to process the same packet, looping forever. This change addresses the issue by expanding the 'limit' size to 64 bits, so that overflows are not possible anymore. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/87 Fixes: 6719331c2f73 ("mptcp: trigger msk processing even for OoO data") Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net/smc: fix double kfree in smc_listen_work()Ursula Braun
If smc_listen_rmda_finish() returns with an error, the storage addressed by 'buf' is freed a second time. Consolidate freeing under a common label and jump to that label. Fixes: 6bb14e48ee8d ("net/smc: dynamic allocation of CLC proposal buffer") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17ionic: add DIMLIB to KconfigShannon Nelson
>> ld.lld: error: undefined symbol: net_dim_get_rx_moderation >>> referenced by ionic_lif.c:52 (drivers/net/ethernet/pensando/ionic/ionic_lif.c:52) >>> net/ethernet/pensando/ionic/ionic_lif.o:(ionic_dim_work) in archive drivers/built-in.a >> ld.lld: error: undefined symbol: net_dim >>> referenced by ionic_txrx.c:456 (drivers/net/ethernet/pensando/ionic/ionic_txrx.c:456) >>> net/ethernet/pensando/ionic/ionic_txrx.o:(ionic_dim_update) in archive drivers/built-in.a v2: removed sketchy dashes in commit message Fixes: 04a834592bf5 ("ionic: dynamic interrupt moderation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17nfp: use correct define to return NONE fecJakub Kicinski
struct ethtool_fecparam carries bitmasks not bit numbers. We want to return 1 (NONE), not 0. Fixes: 0d0870938337 ("nfp: implement ethtool FEC mode settings") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: remove comments on struct rtnl_link_statsJakub Kicinski
We removed the misleading comments from struct rtnl_link_stats64 when we added proper kdoc. struct rtnl_link_stats has the same inline comments, so remove them, too. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of small fixes, some of the i915 ones have been out for a while and got better commit msg explaining some better reasoning behind them (hopefully this trend continues). Otherwise there a few AMD related ones mostly small, one radeon PLL regression fix and a bunch of small mediatek fixes. amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards i915: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function mediatek: - Fix scrolling of panel - Remove duplicated include - Use CPU when fail to get cmdq event - Add missing put_device() call" * tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amd/display: Don't log hdcp module warnings in dmesg drm/amdgpu: declare ta firmware for navy_flounder drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata() drm/mediatek: Add missing put_device() call in mtk_drm_kms_init() drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init() drm/mediatek: Use CPU when fail to get cmdq event drm/mediatek: Remove duplicated include drm/i915: Filter wake_flags passed to default_wake_function drm/i915: Be wary of data races when reading the active execlists drm/i915/gem: Reduce context termination list iteration guard to RCU drm/i915/gem: Delay tracking the GEM context until it is registered drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is drm/radeon: revert "Prefer lower feedback dividers" drm/amdgpu: Include sienna_cichlid in USBC PD FW support. drm/amd/display: update nv1x stutter latencies drm/amd/display: Don't use DRM_ERROR() for DTM add topology drm/amd/pm: support runtime pptable update for sienna_cichlid etc. drm/amdkfd: fix a memory leak issue drm/kfd: fix a system crash issue during GPU recovery ...
2020-09-17net: mdio: octeon: Select MDIO_DEVRESAndrew Lunn
This driver makes use of devm_mdiobus_alloc_size. To ensure this is available select MDIO_DEVRES which provides it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17selftests: Set default protocol for raw sockets in nettestDavid Ahern
IPPROTO_IP (0) is not valid for raw sockets. Default the protocol for raw sockets to IPPROTO_RAW if the protocol has not been set via the -P option. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17dpaa2-eth: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hsr: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17hinic: fix potential resource leakWei Li
In rx_request_irq(), it will just return what irq_set_affinity_hint() returns. If it is failed, the napi and irq requested are not freed properly. So add exits for failures to handle these. Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge branch 'mlxsw-Support-dcbnl_setbuffer-dcbnl_getbuffer'David S. Miller
Ido Schimmel says: ==================== mlxsw: Support dcbnl_setbuffer, dcbnl_getbuffer Petr says: On Spectrum, port buffers, also called port headroom, is where packets are stored while they are parsed and the forwarding decision is being made. For lossless traffic flows, in case shared buffer admission is not allowed, headroom is also where to put the extra traffic received before the sent PAUSE takes effect. Linux supports two DCB interfaces related to the headroom: dcbnl_setbuffer for configuration, and dcbnl_getbuffer for inspection. This patch set implements them. With dcbnl_setbuffer in place, there will be two sources of authority over the ingress configuration: the DCB ETS hook, because ETS configuration is mirrored to ingress, and the DCB setbuffer hook. mlxsw is in a similar situation on the egress side, where there are two sources of the ETS configuration: the DCB ETS hook, and the TC qdisc hooks. This is a non-intuitive situation, because the way the ASIC ends up being configured depends not only on the actual configured bits, but also on the order in which they were configured. To prevent these issues on the ingress side, two configuration modes will exist: DCB mode and TC mode. DCB ETS will keep getting projected to ingress in the (default) DCB mode. When a qdisc is installed on a port, it will be switched to the TC mode, the ingress configuration will be done through the dcbnl_setbuffer callback. The reason is that the dcbnl_setbuffer hook is not standardized and supported by lldpad. Projecting DCB ETS configuration to ingress is a reasonable heuristic to configure ingress especially when PFC is in effect. In patch #1, the toggle between the DCB and TC modes of headroom configuration, described above, is introduced. Patch #2 implements dcbnl_getbuffer and dcbnl_setbuffer. dcbnl_getbuffer can be always used to determine the current port headroom configuration. dcbnl_setbuffer is only permitted in the TC mode. In patch #3, make the qdisc module toggle the headroom mode from DCB to TC and back, depending on whether there is an offloaded qdisc on the port. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mlxsw: spectrum_qdisc: Disable port buffer autoresize with qdiscsPetr Machata
There are two interfaces to configure ETS: qdiscs and DCB. Historically, DCB ETS configuration was projected to ingress as well, and configured port buffers. Qdisc was not. Keep qdiscs behaving this way, and if an offloaded qdisc is configured on a port, move this port's headroom to a manual mode, thus allowing configuration of port buffers through dcbnl_setbuffer. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mlxsw: spectrum_dcb: Implement dcbnl_setbuffer / getbufferPetr Machata
Add dcbnl_setbuffer, which bounces requests if a headroom is in DCB mode. Implement dcbnl_getbuffer such that it can always be used to determine port-buffer configuration, regardless of headroom mode. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mlxsw: spectrum_buffers: Support two headroom modesPetr Machata
There are two interfaces to configure ETS: qdiscs and DCB. Historically, DCB ETS configuration was projected to ingress as well, and configured port buffers. Qdisc was not. So as not to break clients that today use DCB ETS and PFC and rely on getting a reasonable ingress buffer priomap, keep the ETS mirroring in effect. Since qdiscs have not done this mirroring historically, it is reasonable not to introduce it, but rather permit manual ingress configuration through dcbnl_setbuffer only in the qdisc mode. This will require a toggle to indicate whether buffer sizes should be autocomputed or taken from dcbnl_setbuffer, and likewise for priomaps. Introduce such and initialize it, and guard port buffer size configuration as appropriate. The toggle is currently left in the DCB position. In a following patch, qdisc code will switch it. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge branch 'net-phy-Unbind-fixes'David S. Miller
Florian Fainelli says: ==================== net: phy: Unbind fixes This patch series fixes a couple of issues with the unbinding of the PHY drivers and then bringing down a network interface. The first is a NULL pointer de-reference and the second was an incorrect warning being triggered. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Do not warn in phy_stop() on PHY_DOWNFlorian Fainelli
When phy_is_started() was added to catch incorrect PHY states, phy_stop() would not be qualified against PHY_DOWN. It is possible to reach that state when the PHY driver has been unbound and the network device is then brought down. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Avoid NPD upon phy_detach() when driver is unboundFlorian Fainelli
If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17netlink: add spaces around '&' in netlink_recv/sendmsg()Yang Yingliang
It's hard to read the code without spaces around '&', for better reading, add spaces around '&'. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17netdev: Remove unused functionsYueHaibing
There is no callers in tree, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mptcp: Fix unsigned 'max_seq' compared with zero in mptcp_data_queue_ofoYe Bin
Fixes coccicheck warnig: net/mptcp/protocol.c:164:11-18: WARNING: Unsigned expression compared with zero: max_seq > 0 Fixes: ab174ad8ef76 ("mptcp: move ooo skbs into msk out of order queue") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17ethtool: add and use message type for tunnel info replyMichal Kubecek
Tunnel offload info code uses ETHTOOL_MSG_TUNNEL_INFO_GET message type (cmd field in genetlink header) for replies to tunnel info netlink request, i.e. the same value as the request have. This is a problem because we are using two separate enums for userspace to kernel and kernel to userspace message types so that this ETHTOOL_MSG_TUNNEL_INFO_GET (28) collides with ETHTOOL_MSG_CABLE_TEST_TDR_NTF which is what message type 28 means for kernel to userspace messages. As the tunnel info request reached mainline in 5.9 merge window, we should still be able to fix the reply message type without breaking backward compatibility. Fixes: c7d759eb7b12 ("ethtool: add tunnel info interface") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/hdlc: Set skb->protocol before transmittingXie He
This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames. 1. Control frames in hdlc_cisco and hdlc_ppp When these drivers send control frames, skb->protocol is not set. This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames. 2. hdlc_fr When this driver sends control frames, skb->protocol is set to internal values used in this driver. When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices). However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices). Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/lapbether: Make skb->protocol consistent with the headerXie He
This driver is a virtual driver stacked on top of Ethernet interfaces. When this driver transmits data on the Ethernet device, the skb->protocol setting is inconsistent with the Ethernet header prepended to the skb. This causes a user listening on the Ethernet interface with an AF_PACKET socket, to see different sll_protocol values for incoming and outgoing frames, because incoming frames would have this value set by parsing the Ethernet header. This patch changes the skb->protocol value for outgoing Ethernet frames, making it consistent with the Ethernet header prepended. This makes a user listening on the Ethernet device with an AF_PACKET socket, to see the same sll_protocol value for incoming and outgoing frames. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge branch ↵David S. Miller
'net-marvell-prestera-Add-Switchdev-driver-for-Prestera-family-ASIC-device-98DX3255-AC3x' Vadym Kochan says: ==================== net: marvell: prestera: Add Switchdev driver for Prestera family ASIC device 98DX3255 (AC3x) Marvell Prestera 98DX3255 integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. Prestera Switchdev is a firmware based driver that operates via PCI bus. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. This driver implementation includes only L1, basic L2 support, and RX/TX. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. The following Switchdev features are supported: - VLAN-aware bridge offloading - VLAN-unaware bridge offloading - FDB offloading (learning, ageing) - Switchport configuration The original firmware image is uploaded to the linux-firmware repository. PATCH v9: 1) Replace read_poll_timeout_atomic() by original 'do {} while()' loop because it works much better than read_poll_timeout_atomic() considering the TX rate. Also it fixes warning reported on v8. 2) Use ENOENT instead of EEXIST when item is not found in few places - prestera_hw.c and prestera_rxtx.c Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices PATCH v8: 1) Put license in one line. 2) Sort includes. 3) Add missing comma for last enum member 4) Return original error code from last called func in places where instead other error code was used. 5) Add comma for last member in initialized struct in prestera_hw.c 6) Do not initialize 'int err = 0' where it is not needed. 7) Simplify device-tree "marvell,prestera" node parsing by removing not needed checking on 'np == NULL'. 8) Use u32p_replace_bits() instead of open-coded ((word & ~mask) | val) 9) Use dev_warn_ratelimited() instead of pr_warn_ratelimited to indicate the device instance in prestera_rxtx.c 10) Simplify circular buffer list creation in prestera_sdma_{rx,tx}_init() by using do { } while (prev != tail) construction. 11) Use MSEC_PER_SEC instead of hard-coded 1000. 12) Use traditional error handling pattern: err = F(); if (err) return err; 13) Use ether_addr_copy() instead of memcpy() for mac FDB copying in prestera_hw.c 14) Drop swdev->ageing_time member which is not used. 15) Fix ageing macro to be in ms instead of seconds. Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices [2] net: marvell: prestera: Add PCI interface support [3] net: marvell: prestera: Add basic devlink support [4] net: marvell: prestera: Add ethtool interface support [5] net: marvell: prestera: Add Switchdev driver implementation PATCH v7: 1) Use ether_addr_copy() in prestera_main.c:prestera_port_set_mac_address() instead of memcpy(). 2) Removed not needed device's DMA address range check on dma_pool_alloc() in prestera_rxtx.c:prestera_sdma_buf_init(), this should be handled by dma_xxx() API considerig device's DMA mask. 3) Removed not needed device's DMA address range check on dma_map_single() in prestera_rxtx.c:prestera_sdma_rx_skb_alloc(), this should be handled by dma_xxx() API considerig device's DMA mask. 4) Add comment about port mac address limitation in the code where it is used and checked - prestera_main.c: - prestera_is_valid_mac_addr() - prestera_port_create() 5) Add missing destroy_workqueue(swdev_wq) in prestera_switchdev.c:prestera_switchdev_init() on error path handling. Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices [5] net: marvell: prestera: Add Switchdev driver implementation PATCH v6: 1) Use rwlock to protect port list on create/delete stages. The list is mostly readable by fw event handler or packets receiver, but updated only on create/delete port which are performed on switch init/fini stages. 2) Remove not needed variable initialization in prestera_dsa.c:prestera_dsa_parse() 3) Get rid of bounce buffer used by tx handler in prestera_rxtx.c, the bounce buffer should be handled by dma_xxx API via swiotlb. 4) Fix PRESTERA_SDMA_RX_DESC_PKT_LEN macro by using correct GENMASK(13, 0) in prestera_rxtx.c Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices PATCH v5: 0) add Co-developed tags for people who was involved in development. 1) Make SPDX license as separate comment 2) Change 'u8 *' -> 'void *', It allows to avoid not-needed u8* casting. 3) Remove "," in terminated enum's. 4) Use GENMASK(end, start) where it is applicable in. 5) Remove not-needed 'u8 *' casting. 6) Apply common error-check pattern 7) Use ether_addr_copy instead of memcpy 8) Use define for maximum MAC address range (255) 9) Simplify prestera_port_state_set() in prestera_main.c by using separate if-blocks for state setting: if (is_up) { ... } else { ... } which makes logic more understandable. 10) Simplify sdma tx wait logic when checking/updating tx_ring->burst. 11) Remove not-needed packed & aligned attributes 12) Use USEC_PER_MSEC as multiplier when converting ms -> usec on calling readl_poll_timeout. 13) Simplified some error path handling by simple return error code in. 14) Remove not-needed err assignment in. 15) Use dev_err() in prestera_devlink_register(...). Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices [2] net: marvell: prestera: Add PCI interface support [3] net: marvell: prestera: Add basic devlink support [4] net: marvell: prestera: Add ethtool interface support [5] net: marvell: prestera: Add Switchdev driver implementation PATCH v4: 1) Use prestera_ prefix in netdev_ops variable. 2) Kconfig: use 'default PRESTERA' build type for CONFIG_PRESTERA_PCI to be synced by default with prestera core module. 3) Use memcpy_xxio helpers in prestera_pci.c for IO buffer copying. 4) Generate fw image path via snprintf() instead of macroses. 5) Use pcim_ helpers in prestera_pci.c which simplified the probe/remove logic. 6) Removed not needed initializations of variables which are used in readl_poll_xxx() helpers. 7) Fixed few grammar mistakes in patch[2] description. 8) Export only prestera_ethtool_ops struct instead of each ethtool handler. 9) Add check for prestera_dev_check() in switchdev event handling to make sure there is no wrong topology. Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices [2] net: marvell: prestera: Add PCI interface support [4] net: marvell: prestera: Add ethtool interface support [5] net: marvell: prestera: Add Switchdev driver implementation PATCH v3: 1) Simplify __be32 type casting in prestera_dsa.c 2) Added per-patch changelog under "---" line. PATCH v2: 1) Use devlink_port_type_clear() 2) Add _MS prefix to timeout defines. 3) Remove not-needed packed attribute from the firmware ipc structs, also the firmware image needs to be uploaded too (will do it soon). 4) Introduce prestera_hw_switch_fini(), to be mirrored with init and do simple validation if the event handlers are unregistered. 5) Use kfree_rcu() for event handler unregistering. 6) Get rid of rcu-list usage when dealing with ports, not needed for now. 7) Little spelling corrections in the error/info messages. 8) Make pci probe & remove logic mirrored. 9) Get rid of ETH_FCS_LEN in headroom setting, not needed. PATCH: 1) Fixed W=1 warnings 2) Renamed PCI driver name to be more generic "Prestera DX" because there will be more devices supported. 3) Changed firmware image dir path: marvell/ -> mrvl/prestera/ to be aligned with location in linux-firmware.git (if such will be accepted). RFC v3: 1) Fix prestera prefix in prestera_rxtx.c 2) Protect concurrent access from multiple ports on multiple CPU system on tx path by spinlock in prestera_rxtx.c 3) Try to get base mac address from device-tree, otherwise use a random generated one. 4) Move ethtool interface support into separate prestera_ethtool.c file. 5) Add basic devlink support and get rid of physical port naming ops. 6) Add STP support in Switchdev driver. 7) Removed MODULE_AUTHOR 8) Renamed prestera.c -> prestera_main.c, and kernel module to prestera.ko RFC v2: 1) Use "pestera_" prefix in struct's and functions instead of mvsw_pr_ 2) Original series split into additional patches for Switchdev ethtool support. 3) Use major and minor firmware version numbers in the firmware image filename. 4) Removed not needed prints. 5) Use iopoll API for waiting on register's value in prestera_pci.c 6) Use standart approach for describing PCI ID matching section instead of using custom wrappers in prestera_pci.c 7) Add RX/TX support in prestera_rxtx.c. 8) Rewritten prestera_switchdev.c with following changes: - handle netdev events from prestera.c - use struct prestera_bridge for bridge objects, and get rid of struct prestera_bridge_device which may confuse. - use refcount_t 9) Get rid of macro usage for sending fw requests in prestera_hw.c 10) Add base_mac setting as module parameter. base_mac is required for generation default port's mac. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17dt-bindings: marvell,prestera: Add description for device-tree bindingsVadym Kochan
Add brief description how to configure base mac address binding in device-tree. Describe requirement for the PCI port which is connected to the ASIC, to allow access to the firmware related registers. Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add Switchdev driver implementationVadym Kochan
The following features are supported: - VLAN-aware bridge offloading - VLAN-unaware bridge offloading - FDB offloading (learning, ageing) - Switchport configuration Currently there are some limitations like: - Only 1 VLAN-aware bridge instance supported - FDB ageing timeout parameter is set globally per device Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add ethtool interface supportVadym Kochan
The ethtool API provides support for the configuration of the following features: speed and duplex, auto-negotiation, MDI-x, forward error correction, port media type. The API also provides information about the port status, hardware and software statistic. The following limitation exists: - port media type should be configured before speed setting - ethtool -m option is not supported - ethtool -p option is not supported - ethtool -r option is supported for RJ45 port only - the following combination of parameters is not supported: ethtool -s sw1pX port XX autoneg on - forward error correction feature is supported only on SFP ports, 10G speed - auto-negotiation and MDI-x features are not supported on Copper-to-Fiber SFP module Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add basic devlink supportVadym Kochan
Add very basic support for devlink interface: - driver name - fw version - devlink ports Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add PCI interface supportVadym Kochan
Add PCI interface driver for Prestera Switch ASICs family devices, which provides: - Firmware loading mechanism - Requests & events handling to/from the firmware - Access to the firmware on the bus level The firmware has to be loaded each time the device is reset. The driver is loading it from: /lib/firmware/mrvl/prestera/mvsw_prestera_fw-v{MAJOR}.{MINOR}.img The full firmware image version is located within the internal header and consists of 3 numbers - MAJOR.MINOR.PATCH. Additionally, driver has hard-coded minimum supported firmware version which it can work with: MAJOR - reflects the support on ABI level between driver and loaded firmware, this number should be the same for driver and loaded firmware. MINOR - this is the minimum supported version between driver and the firmware. PATCH - indicates only fixes, firmware ABI is not changed. Firmware image file name contains only MAJOR and MINOR numbers to make driver be compatible with any PATCH version. Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add driver for Prestera family ASIC devicesVadym Kochan
Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17cxgb4: fix memory leak during module unloadRaju Rangoju
Fix the memory leak in mps during module unload path by freeing mps reference entries if the list adpter->mps_ref is not already empty Fixes: 28b3870578ef ("cxgb4: Re-work the logic for mps refcounting") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17genetlink: Remove unused function genl_err_attr()YueHaibing
It is never used, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net/sched: Remove unused function qdisc_queue_drop_head()YueHaibing
It is not used since commit a09ceb0e0814 ("sched: remove qdisc->drop") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17selftests: mptcp: interpret \n as a new lineMatthieu Baerts
In case of errors, this message was printed: (...) # read: Resource temporarily unavailable # client exit code 0, server 3 # \nnetns ns1-0-BJlt5D socket stat for 10003: (...) Obviously, the idea was to add a new line before the socket stat and not print "\nnetns". Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN") Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net/packet: Fix a comment about mac_headerXie He
1. Change all "dev->hard_header" to "dev->header_ops" 2. On receiving incoming frames when header_ops == NULL: The comment only says what is wrong, but doesn't say what is right. This patch changes the comment to make it clear what is right. 3. On transmitting and receiving outgoing frames when header_ops == NULL: The comment explains that the LL header will be later added by the driver. However, I think it's better to simply say that the LL header is invisible to us. This phrasing is better from a software engineering perspective, because this makes it clear that what happens in the driver should be hidden from us and we should not care about what happens internally in the driver. 4. On resuming the LL header (for RAW frames) when header_ops == NULL: The comment says we are "unlikely" to restore the LL header. However, we should say that we are "unable" to restore it. It's not possible (rather than not likely) to restore it, because: 1) There is no way for us to restore because the LL header internally processed by the driver should be invisible to us. 2) In function packet_rcv and tpacket_rcv, the code only tries to restore the LL header when header_ops != NULL. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17hv_netvsc: Add validation for untrusted Hyper-V valuesAndres Beltran
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause indexing off the end of an array, or subvert an existing validation via integer overflow. Ensure that outgoing packets do not have any leftover guest memory that has not been zeroed out. Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge branch 'net-hns3-updates-for-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: updates for -next There are some optimizations related to IO path. Change since V1: - fixes a unsuitable handling in hns3_lb_clear_tx_ring() of #6 which pointed out by Saeed Mahameed. previous version: V1: https://patchwork.ozlabs.org/project/netdev/cover/1600085217-26245-1-git-send-email-tanhuazhong@huawei.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: use napi_consume_skb() when cleaning tx descYunsheng Lin
Use napi_consume_skb() to batch consuming skb when cleaning tx desc in NAPI polling. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: use writel() to optimize the barrier operationYunsheng Lin
writel() can be used to order I/O vs memory by default when writing portable drivers. Use writel() to replace wmb() + writel_relaxed(), and writel() is dma_wmb() + writel_relaxed() for ARM64, so there is an optimization here because dma_wmb() is a lighter barrier than wmb(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: optimize the rx clean processYunsheng Lin
Currently HNS3_RING_RX_RING_FBDNUM_REG register is read to determine how many rx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the rx desc to determine if a specific rx desc can be cleaned. The hns3 driver clear valid bit in the rx desc before notifying the rx desc to the hw, and hw will only set the valid bit of the rx desc after corresponding buffer is filled with packet data and other field in the rx desc is set accordingly. Add hns3_rx_ring_move_fw() function to clear the valid bit in the rx desc before moving rx ring's next_to_clean forward to avoid double cleaning a rx desc, also add a dma_rmb() barrier in hns3_handle_rx_bd() to make sure valid bit is set before reading other field in the rx desc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: optimize the tx clean processYunsheng Lin
Currently HNS3_RING_TX_RING_HEAD_REG register is read to determine how many tx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the tx desc to determine if a specific tx desc can be cleaned. The hns3 driver sets valid bit in the tx desc before ringing a doorbell to the hw, and hw will only clear the valid bit of the tx desc after corresponding packet is sent out to the wire. And because next_to_use for tx ring is a changing variable when the driver is filling the tx desc, so reuse the pull_len for rx ring to record the tx desc that has notified to the hw, so that hns3_nic_reclaim_desc() can decide how many tx desc's valid bit need checking when reclaiming tx desc. And io_err_cnt stat is also removed for it is not used anymore. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: batch tx doorbell operationYunsheng Lin
Use netdev_xmit_more() to defer the tx doorbell operation when the skb is passed to the driver continuously. By doing this we can improve the overall xmit performance by avoid some doorbell operations. Also, the tx_err_cnt stat is not used, so rename it to tx_more stat. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: batch the page reference count updatesYunsheng Lin
Batch the page reference count updates instead of doing them one at a time. By doing this we can improve the overall receive performance by avoid some atomic increment operations when the rx page is reused. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge tag 'mediatek-drm-fixes-5.9' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.9 1. Fix scrolling of panel 2. Remove duplicated include 3. Use CPU when fail to get cmdq event 4. Add missing put_device() call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org
2020-09-18Merge tag 'drm-intel-fixes-2020-09-17' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc6: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2l8vlj3.fsf@intel.com
2020-09-18Merge tag 'amd-drm-fixes-5.9-2020-09-17' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-17: amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043818.3717-1-alexander.deucher@amd.com
2020-09-17fuse: fix the ->direct_IO() treatment of iov_iterAl Viro
the callers rely upon having any iov_iter_truncate() done inside ->direct_IO() countered by iov_iter_reexpand(). Reported-by: Qian Cai <cai@redhat.com> Tested-by: Qian Cai <cai@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-17i2c: core: Call i2c_acpi_install_space_handler() before ↵Hans de Goede
i2c_acpi_register_devices() Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-17Merge tag 'mips_fixes_5.9_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "Two small fixes for SNI machines" * tag 'mips_fixes_5.9_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: SNI: Fix spurious interrupts MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT
generated by cgit (git 2.34.1) at 2025-07-19 20:57:17 +0000