summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-30Merge tag 'pstore-v6.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore revert from Kees Cook: "A misbehavior with some compression backends in pstore was just discovered due to the recent crypto acomp migration. Since we're so close to release, it seems better to just simply revert it, and we can figure out what's going on without leaving it broken for a release. - Revert crypto acomp migration (Guilherme G. Piccoli)" * tag 'pstore-v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: Revert "pstore: migrate to crypto acomp interface"
2022-09-30Merge tag 'gpio-fixes-for-v6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "One more fix for the upcoming release: - fix the check for pwm support on non-A8K platforms in gpio-mvebu" * tag 'gpio-fixes-for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mvebu: Fix check for pwm support on non-A8K platforms
2022-09-30Revert "pstore: migrate to crypto acomp interface"Guilherme G. Piccoli
This reverts commit e4f0a7ec586b7644107839f5394fb685cf1aadcc. When using this new interface, both efi_pstore and ramoops backends are unable to properly decompress dmesg if using zstd, lz4 and lzo algorithms (and maybe more). It does succeed with deflate though. The message observed in the kernel log is: [2.328828] pstore: crypto_acomp_decompress failed, ret = -22! The pstore infrastructure is able to collect the dmesg with both backends tested, but since decompression fails it's unreadable. With this revert everything is back to normal. Fixes: e4f0a7ec586b ("pstore: migrate to crypto acomp interface") Cc: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220929215515.276486-1-gpiccoli@igalia.com
2022-09-30Merge tag 'drm-fixes-2022-09-30-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Last set of fixes for 6.0 hopefully - minor bridge fixes, i915 fixes, and a bunch of amdgpu fixes for new IP blocks, along with a couple of regression fixes. Should be all set for merge window next week. amdgpu: - GC 11.x fixes - SMU 13.x fixes - DCN 3.1.4 fixes - DCN 3.2.x fixes - GC 9.x fix - Fence fix - SR-IOV supend/resume fix - PSR regression fix i915: - Restrict forced preemption to the active context - Restrict perf_limit_reasons to the supported platforms - gen11+ bridge: - analogix: Revert earlier suspend fix - lt8912b: Fix corrupt display output" * tag 'drm-fixes-2022-09-30-1' of git://anongit.freedesktop.org/drm/drm: (26 commits) drm/amd/display: Prevent OTG shutdown during PSR SU drm/i915/gt: Perf_limit_reasons are only available for Gen11+ drm/amdgpu: Add amdgpu suspend-resume code path under SRIOV drm/amdgpu: Remove fence_process in count_emitted drm/amdgpu: Correct the position in patch_cond_exec drm/amd/display: fill in clock values when DPM is not enabled drm/amd/display: Avoid unnecessary pixel rate divider programming drm/amd/display: Remove assert for odm transition case drm/amd/display: Fix typo in get_pixel_rate_div drm/amd/display: Fix audio on display after unplugging another drm/amd/display: Add explicit FIFO disable for DP blank drm/amd/display: Wrap OTG disable workaround with FIFO control drm/amd/display: Do DIO FIFO enable after DP video stream enable drm/amd/display: Update DCN32 to use new SR latencies drm/amd/display: Avoid avoid unnecessary pixel rate divider programming drm/amdkfd: fix dropped interrupt in kfd_int_process_v11 drm/amdgpu: pass queue size and is_aql_queue to MES drm/amdkfd: fix MQD init for GFX11 in init_mqd drm/amd/pm: use adverse selection for dpm features unsupported by driver drm/amd/pm: enable gfxoff feature for SMU 13.0.0 ...
2022-09-30KVM: selftests: Compare insn opcodes directly in fix_hypercall_testSean Christopherson
Directly compare the expected versus observed hypercall instructions when verifying that KVM patched in the native hypercall (FIX_HYPERCALL_INSN quirk enabled). gcc rightly complains that doing a 4-byte memcpy() with an "unsigned char" as the source generates an out-of-bounds accesses. Alternatively, "exp" and "obs" could be declared as 3-byte arrays, but there's no known reason to copy locally instead of comparing directly. In function ‘assert_hypercall_insn’, inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2: x86_64/fix_hypercall_test.c:63:9: error: array subscript ‘unsigned int[0]’ is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds] 63 | memcpy(&exp, exp_insn, sizeof(exp)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x86_64/fix_hypercall_test.c: In function ‘guest_main’: x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1 42 | extern unsigned char vmx_hypercall_insn; | ^~~~~~~~~~~~~~~~~~ x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1 25 | extern unsigned char svm_hypercall_insn; | ^~~~~~~~~~~~~~~~~~ In function ‘assert_hypercall_insn’, inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2: x86_64/fix_hypercall_test.c:64:9: error: array subscript ‘unsigned int[0]’ is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds] 64 | memcpy(&obs, obs_insn, sizeof(obs)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x86_64/fix_hypercall_test.c: In function ‘guest_main’: x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1 25 | extern unsigned char svm_hypercall_insn; | ^~~~~~~~~~~~~~~~~~ x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1 42 | extern unsigned char vmx_hypercall_insn; | ^~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make: *** [../lib.mk:135: tools/testing/selftests/kvm/x86_64/fix_hypercall_test] Error 1 Fixes: 6c2fa8b20d0c ("selftests: KVM: Test KVM_X86_QUIRK_FIX_HYPERCALL_INSN") Cc: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Message-Id: <20220928233652.783504-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-30KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest useSean Christopherson
Implement memcmp(), memcpy(), and memset() to override the compiler's built-in versions in order to guarantee that the compiler won't generate out-of-line calls to external functions via the PLT. This allows the helpers to be safely used in guest code, as KVM selftests don't support dynamic loading of guest code. Steal the implementations from the kernel's generic versions, sans the optimizations in memcmp() for unaligned accesses. Put the utilities in a separate compilation unit and build with -ffreestanding to fudge around a gcc "feature" where it will optimize memset(), memcpy(), etc... by generating a recursive call. I.e. the compiler optimizes itself into infinite recursion. Alternatively, the individual functions could be tagged with optimize("no-tree-loop-distribute-patterns"), but using "optimize" for anything but debug is discouraged, and Linus NAK'd the use of the flag in the kernel proper[*]. https://lore.kernel.org/lkml/CAHk-=wik-oXnUpfZ6Hw37uLykc-_P0Apyn2XuX-odh-3Nzop8w@mail.gmail.com Cc: Andrew Jones <andrew.jones@linux.dev> Cc: Anup Patel <anup@brainfault.org> Cc: Atish Patra <atishp@atishpatra.org> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220928233652.783504-2-seanjc@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-30KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guestJim Mattson
The only thing reported by CPUID.9 is the value of IA32_PLATFORM_DCA_CAP[31:0] in EAX. This MSR doesn't even exist in the guest, since CPUID.1:ECX.DCA[bit 18] is clear in the guest. Clear CPUID.9 in KVM_GET_SUPPORTED_CPUID. Fixes: 24c82e576b78 ("KVM: Sanitize cpuid") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220922231854.249383-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-30KVM: selftests: Gracefully handle empty stack tracesDavid Matlack
Bail out of test_dump_stack() if the stack trace is empty rather than invoking addr2line with zero addresses. The problem with the latter is that addr2line will block waiting for addresses to be passed in via stdin, e.g. if running a selftest from an interactive terminal. Opportunistically fix up the comment that mentions skipping 3 frames since only 2 are skipped in the code. Cc: Vipin Sharma <vipinsh@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20220922231724.3560211-1-dmatlack@google.com> [Small tweak to keep backtrace() call close to if(). - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-30KVM: selftests: replace assertion with warning in access_tracking_perf_testEmanuele Giuseppe Esposito
Page_idle uses {ptep/pmdp}_clear_young_notify which in turn calls the mmu notifier callback ->clear_young(), which purposefully does not flush the TLB. When running the test in a nested guest, point 1. of the test doc header is violated, because KVM TLB is unbounded by size and since no flush is forced, KVM does not update the sptes accessed/idle bits resulting in guest assertion failure. More precisely, only the first ACCESS_WRITE in run_test() actually makes visible changes, because sptes are created and the accessed bit is set to 1 (or idle bit is 0). Then the first mark_memory_idle() passes since access bit is still one, and sets all pages as idle (or not accessed). When the next write is performed, the update is not flushed therefore idle is still 1 and next mark_memory_idle() fails. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220926082923.299554-1-eesposit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-30Merge tag 'drm-intel-fixes-2022-09-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Restrict forced preemption to the active context (Chris) - Restrict perf_limit_reasons to the supported platforms - gen11+ (Ashutosh) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YzXAkH1a32pYJD33@intel.com
2022-09-30Merge tag 'amd-drm-fixes-6.0-2022-09-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-29: amdgpu: - GC 11.x fixes - SMU 13.x fixes - DCN 3.1.4 fixes - DCN 3.2.x fixes - GC 9.x fix - Fence fix - SR-IOV supend/resume fix - PSR regression fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220929144003.8363-1-alexander.deucher@amd.com
2022-09-30Merge tag 'drm-misc-fixes-2022-09-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * bridge/analogix: Revert earlier suspend fix * bridge/lt8912b: Fix corrupt display output Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YzWvHhaqHhYirn4L@linux-uq9g
2022-09-29Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull coredump fix from Al Viro: "Fix for breakage in dump_user_range()" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [coredump] don't use __kernel_write() on kmap_local_page()
2022-09-29drm/amdgpu: Enable sram on vcn_4_0_2Sonny Jiang
Enable sram on vcn_4_0_2 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Enable VCN DPG for GC11_0_1Sonny Jiang
Enable VCN DPG on GC11_0_1 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29perf build: Fixup disabling of -Wdeprecated-declarations for the python ↵Arnaldo Carvalho de Melo
scripting engine A brown paper bag where -Wno-error=deprecated-declarations was added from compiler output when the right thing is to add -Wno-deprecated-declarations, fix it. Fixes: 4ee3c4da8b1b9c22 ("perf scripting python: Do not build fail on deprecation warnings") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29perf tests mmap-basic: Remove unused variable to address clang 15 warningJiri Olsa
A clang 15 build reveal several unused-but-set variables, removing the 'foo' variable in tests/mmap-basic.o object to address one of those cases. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220929140514.226807-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29perf parse-events: Ignore clang 15 warning about variable set but unused in ↵Jiri Olsa
bison produced code clang 15 now warns: 46 65.20 fedora:rawhide : FAIL clang version 15.0.0 (Fedora 15.0.0-3.fc38) util/parse-events-bison.c:1401:9: error: variable 'parse_events_nerrs' set but not used [-Werror,-Wunused-but-set-variable] int yynerrs = 0; ^ #define yynerrs parse_events_nerrs ^ 1 error generated. make[3]: *** [/git/perf-6.0.0-rc7/tools/build/Makefile.build:139: util] Error 2 Just ignore one more compiler warning for the bison generated C code. Committer notes: Older clangs don't know about -Wunused-but-set-variable, so we need to add -Wno-unknown-warning-option to avoid this: 37 44.92 fedora:32 : FAIL clang version 10.0.1 (Fedora 10.0.1-3.fc32) error: unknown warning option '-Wno-unused-but-set-variable'; did you mean '-Wno-unused-const-variable'? [-Werror,-Wunknown-warning-option] make[3]: *** [/git/perf-6.0.0-rc7/tools/build/Makefile.build:139: util] Error 2 Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/20220929140514.226807-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29Merge tag 'net-6.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from wifi and can. Current release - regressions: - phy: don't WARN for PHY_UP state in mdio_bus_phy_resume() - wifi: fix locking in mac80211 mlme - eth: - revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()" - mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe Previous releases - regressions: - wifi: fix regression with non-QoS drivers Previous releases - always broken: - mptcp: fix unreleased socket in accept queue - wifi: - don't start TX with fq->lock to fix deadlock - fix memory corruption in minstrel_ht_update_rates() - eth: - macb: fix ZynqMP SGMII non-wakeup source resume failure - mt7531: only do PLL once after the reset - usbnet: fix memory leak in usbnet_disconnect() Misc: - usb: qmi_wwan: add new usb-id for Dell branded EM7455" * tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits) mptcp: fix unreleased socket in accept queue mptcp: factor out __mptcp_close() without socket lock net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2} net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge can: c_can: don't cache TX messages for C_CAN cores ice: xsk: drop power of 2 ring size restriction for AF_XDP ice: xsk: change batched Tx descriptor cleaning net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455 selftests: Fix the if conditions of in test_extra_filter() net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume() net: stmmac: power up/down serdes in stmmac_open/release wifi: mac80211: mlme: Fix double unlock on assoc success handling wifi: mac80211: mlme: Fix missing unlock on beacon RX wifi: mac80211: fix memory corruption in minstrel_ht_update_rates() wifi: mac80211: fix regression with non-QoS drivers wifi: mac80211: ensure vif queues are operational after start wifi: mac80211: don't start TX with fq->lock to fix deadlock wifi: cfg80211: fix MCS divisor value net: hippi: Add missing pci_disable_device() in rr_init_one() net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe ...
2022-09-29Merge tag 'input-for-v6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - small fixes for iqs62x-keys and melfas_mip4 drivers - corrected register address in snvs_pwrkey driver - Synaptic driver will stop trying to use intertouch (native) mode on some Lenovo AMD devices * tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1 Input: iqs62x-keys - drop unused device node references Input: melfas_mip4 - fix return value check in mip4_probe()
2022-09-29Merge tag 'nvme-6.0-2022-09-29' of git://git.infradead.org/nvme into block-6.0Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices (Michael Kelley) - disable Write Zeroes on Phison E3C/E4C (Tina Hsu)" * tag 'nvme-6.0-2022-09-29' of git://git.infradead.org/nvme: nvme-pci: disable Write Zeroes on Phison E3C/E4C nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
2022-09-29drm/amd/display: Prevent OTG shutdown during PSR SULeo Li
[Why] Enabling Z10 optimizations allows DMUB to disable the OTG during PSR link-off. This theoretically saves power by putting more of the display hardware to sleep. However, we observe that with PSR SU, it causes visual artifacts, higher power usage, and potential system hang. This is partly due to an odd behavior with the VStartup interrupt used to signal DRM vblank events. If the OTG is toggled on/off during a PSR link on/off cycle, the vstartup interrupt fires twice in quick succession. This generates incorrectly timed vblank events. Additionally, it can cause cursor updates to generate visual artifacts. Note that this is not observed with PSR1 since PSR is fully disabled when there are vblank event requestors. Cursor updates are also artifact-free, likely because there are no selectively-updated (SU) frames that can generate artifacts. [How] A potential solution is to disable z10 idle optimizations only when fast updates (flips & cursor updates) are committed. A mechanism to do so would require some thoughtful design. Let's just disable idle optimizations for PSR2 for now. Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU") Reported-by: August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/ Tested-by: August Wikerfors <git@augustwikerfors.se> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29perf tests record: Fail the test if the 'errs' counter is not zeroArnaldo Carvalho de Melo
We were just checking for the 'err' variable, when we should really see if there was some of the many checked errors that don't stop the test right away. Detected with clang 15.0.0: 44 75.23 fedora:37 : FAIL clang version 15.0.0 (Fedora 15.0.0-2.fc37) tests/perf-record.c:68:16: error: variable 'errs' set but not used [-Werror,-Wunused-but-set-variable] int err = -1, errs = 0, i, wakeups = 0; ^ 1 error generated. The patch introducing this 'perf test' entry had that check: + return (err < 0 || errs > 0) ? -1 : 0; But at some point we lost that: - return (err < 0 || errs > 0) ? -1 : 0; + if (err == -EACCES) + return TEST_SKIP; + if (err < 0) + return TEST_FAIL; + return TEST_OK Put it back. Fixes: 2cf88f4614c996e5 ("perf test: Use skip in PERF_RECORD_*") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YzR0n5QhsH9VyYB0@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29perf test: Fix test case 87 ("perf record tests") for hybrid systemsZhengjun Xing
The test case 87 ("perf record tests") failed on hybrid systems,the event "cpu/br_inst_retired.near_call/p" is only for non-hybrid system. Correct the test event to support both non-hybrid and hybrid systems. Before: # ./perf test 87 87: perf record tests : FAILED! After: # ./perf test 87 87: perf record tests : Ok Fixes: 24f378e66021f559 ("perf test: Add basic perf record tests") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220927051513.3768717-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29Merge tag 'ata-6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fixes from Damien Le Moal: "Three late patches to fix problems discovered recently: - Add a horkage to disable link power management by default for the Pioneer BDR-207M and BDR-205 DVD drives (from Niklas) - Two patches to fix setting the maximum queue depth of libsas owned ATA devices (from me)" * tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-sata: Fix device queue depth control ata: libata-scsi: Fix initialization of device queue depth libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
2022-09-29Merge tag 'loongarch-fixes-6.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Some trivial fixes and cleanup" * tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Clean up loongson3_smp_ops declaration LoongArch: Fix and cleanup csr_era handling in do_ri() LoongArch: Align the address of kernel_entry to 4KB
2022-09-29LoongArch: Clean up loongson3_smp_ops declarationYanteng Si
Since loongson3_smp_ops is not used in LoongArch anymore, let's remove it for cleanup. Fixes: f2ac457a6138 ("LoongArch: Add CPU definition headers") Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-29LoongArch: Fix and cleanup csr_era handling in do_ri()Huacai Chen
We don't emulate reserved instructions and just send a signal to the current process now. So we don't need to call compute_return_era() to add 4 (point to the next instruction) to csr_era in pt_regs. RA/ERA's backup/restore is cleaned up as well. Signed-off-by: Jun Yi <yijun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-29LoongArch: Align the address of kernel_entry to 4KBHuacai Chen
Align the address of kernel_entry to 4KB, to avoid early tlb miss exception in case the entry code crosses page boundary. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-28Merge branch 'mptcp-properly-clean-up-unaccepted-subflows'Jakub Kicinski
Mat Martineau says: ==================== mptcp: Properly clean up unaccepted subflows Patch 1 factors out part of the mptcp_close() function for use by a caller that already owns the socket lock. This is a prerequisite for patch 2. Patch 2 is the fix that fully cleans up the unaccepted subflow sockets. ==================== Link: https://lore.kernel.org/r/20220927193158.195729-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28mptcp: fix unreleased socket in accept queueMenglong Dong
The mptcp socket and its subflow sockets in accept queue can't be released after the process exit. While the release of a mptcp socket in listening state, the corresponding tcp socket will be released too. Meanwhile, the tcp socket in the unaccept queue will be released too. However, only init subflow is in the unaccept queue, and the joined subflow is not in the unaccept queue, which makes the joined subflow won't be released, and therefore the corresponding unaccepted mptcp socket will not be released to. This can be reproduced easily with following steps: 1. create 2 namespace and veth: $ ip netns add mptcp-client $ ip netns add mptcp-server $ sysctl -w net.ipv4.conf.all.rp_filter=0 $ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1 $ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1 $ ip link add red-client netns mptcp-client type veth peer red-server \ netns mptcp-server $ ip -n mptcp-server address add 10.0.0.1/24 dev red-server $ ip -n mptcp-server address add 192.168.0.1/24 dev red-server $ ip -n mptcp-client address add 10.0.0.2/24 dev red-client $ ip -n mptcp-client address add 192.168.0.2/24 dev red-client $ ip -n mptcp-server link set red-server up $ ip -n mptcp-client link set red-client up 2. configure the endpoint and limit for client and server: $ ip -n mptcp-server mptcp endpoint flush $ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2 $ ip -n mptcp-client mptcp endpoint flush $ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2 $ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \ 1 subflow 3. listen and accept on a port, such as 9999. The nc command we used here is modified, which makes it use mptcp protocol by default. $ ip netns exec mptcp-server nc -l -k -p 9999 4. open another *two* terminal and use each of them to connect to the server with the following command: $ ip netns exec mptcp-client nc 10.0.0.1 9999 Input something after connect to trigger the connection of the second subflow. So that there are two established mptcp connections, with the second one still unaccepted. 5. exit all the nc command, and check the tcp socket in server namespace. And you will find that there is one tcp socket in CLOSE_WAIT state and can't release forever. Fix this by closing all of the unaccepted mptcp socket in mptcp_subflow_queue_clean() with __mptcp_close(). Now, we can ensure that all unaccepted mptcp sockets will be cleaned by __mptcp_close() before they are released, so mptcp_sock_destruct(), which is used to clean the unaccepted mptcp socket, is not needed anymore. The selftests for mptcp is ran for this commit, and no new failures. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Fixes: 6aeed9045071 ("mptcp: fix race on unaccepted mptcp sockets") Cc: stable@vger.kernel.org Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Mengen Sun <mengensun@tencent.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28mptcp: factor out __mptcp_close() without socket lockMenglong Dong
Factor out __mptcp_close() from mptcp_close(). The caller of __mptcp_close() should hold the socket lock, and cancel mptcp work when __mptcp_close() returns true. This function will be used in the next commit. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Fixes: 6aeed9045071 ("mptcp: fix race on unaccepted mptcp sockets") Cc: stable@vger.kernel.org Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Mengen Sun <mengensun@tencent.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== ice: xsk: ZC changes Maciej Fijalkowski says: This set consists of two fixes to issues that were either pointed out on indirectly (John was reviewing AF_XDP selftests that were testing ice's ZC support) mailing list or were directly reported by customers. First patch allows user space to see done descriptor in CQ even after a single frame being transmitted and second patch removes the need for having HW rings sized to power of 2 number of descriptors when used against AF_XDP. I also forgot to mention that due to the current Tx cleaning algorithm, 4k HW ring was broken and these two patches bring it back to life, so we kill two birds with one stone. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: xsk: drop power of 2 ring size restriction for AF_XDP ice: xsk: change batched Tx descriptor cleaning ==================== Link: https://lore.kernel.org/r/20220927164112.4011983-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2}Daniel Golle
The bitmasks applied in RX_DMA_GET_SPORT and RX_DMA_GET_SPORT_V2 macros were swapped. Fix that. Reported-by: Chen Minqiang <ptpt52@gmail.com> Fixes: 160d3a9b192985 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support") Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/YzMW+mg9UsaCdKRQ@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridgeVladimir Oltean
Currently the following set of commands fails: $ ip link add br0 type bridge # vlan_filtering 0 $ ip link set swp0 master br0 $ bridge vlan port vlan-id swp0 1 PVID Egress Untagged $ bridge vlan add dev swp0 vid 10 Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs. Dumping ocelot->vlans, one can see that the 2 egress-untagged VLANs on swp0 are vid 1 (the bridge PVID) and vid 4094, a PVID used privately by the driver for VLAN-unaware bridging. So this is why bridge vid 10 is refused, despite 'bridge vlan' showing a single egress untagged VLAN. As mentioned in the comment added, having this private VLAN does not impose restrictions to the hardware configuration, yet it is a bookkeeping problem. There are 2 possible solutions. One is to make the functions that operate on VLAN-unaware pvids: - ocelot_add_vlan_unaware_pvid() - ocelot_del_vlan_unaware_pvid() - ocelot_port_setup_dsa_8021q_cpu() - ocelot_port_teardown_dsa_8021q_cpu() call something different than ocelot_vlan_member_(add|del)(), the latter being the real problem, because it allocates a struct ocelot_bridge_vlan *vlan which it adds to ocelot->vlans. We don't really *need* the private VLANs in ocelot->vlans, it's just that we have the extra convenience of having the vlan->portmask cached in software (whereas without these structures, we'd have to create a raw ocelot_vlant_rmw_mask() procedure which reads back the current port mask from hardware). The other solution is to filter out the private VLANs from ocelot_port_num_untagged_vlans(), since they aren't what callers care about. We only need to do this to the mentioned function and not to ocelot_port_num_tagged_vlans(), because private VLANs are never egress-tagged. Nothing else seems to be broken in either solution, but the first one requires more rework which will conflict with the net-next change 36a0bf443585 ("net: mscc: ocelot: set up tag_8021q CPU ports independent of user port affinity"), and I'd like to avoid that. So go with the other one. Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220927122042.1100231-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28clk: imx93: drop of_match_ptrPeng Fan
There is build warning when CONFIG_OF is not selected. >> drivers/clk/imx/clk-imx93.c:324:34: warning: 'imx93_clk_of_match' >> defined but not used [-Wunused-const-variable=] 324 | static const struct of_device_id imx93_clk_of_match[] = { | ^~~~~~~~~~~~~~~~~~ The driver only support DT table, no sense to use of_match_ptr. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220830033137.4149542-3-peng.fan@oss.nxp.com Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28clk: iproc: Do not rely on node name for correct PLL setupFlorian Fainelli
After commit 31fd9b79dc58 ("ARM: dts: BCM5301X: update CRU block description") a warning from clk-iproc-pll.c was generated due to a duplicate PLL name as well as the console stopped working. Upon closer inspection it became clear that iproc_pll_clk_setup() used the Device Tree node unit name as an unique identifier as well as a parent name to parent all clocks under the PLL. BCM5301X was the first platform on which that got noticed because of the DT node unit name renaming but the same assumptions hold true for any user of the iproc_pll_clk_setup() function. The first 'clock-output-names' property is always guaranteed to be unique as well as providing the actual desired PLL clock name, so we utilize that to register the PLL and as a parent name of all children clock. Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20220905161504.1526-1-f.fainelli@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28io_uring/poll: disable level triggered pollJens Axboe
Stefan reports that there are issues with the level triggered notification. Since we're late in the cycle, and it was introduced for the 6.0 release, just disable it at prep time and we can bring this back when Samba is happy with it. Reported-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-28clk: sunxi-ng: h6: Fix default PLL GPU rateJernej Skrabec
In commit 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS") divider M0 was forced to be 1 in order to support DFS. However, that left N as it is, at high value of 36. On boards without devfreq enabled (all of them in kernel 6.0), this effectively sets GPU frequency to 864 MHz. This is about 100 MHz above maximum supported frequency. In order to fix this, let's set N to 18 (register value 17). That way default frequency of 432 MHz is preserved. Fixes: 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220928200122.3963509-1-jernej.skrabec@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28drm/i915/gt: Perf_limit_reasons are only available for Gen11+Ashutosh Dixit
Register GT0_PERF_LIMIT_REASONS (0x1381a8) is available only for Gen11+. Therefore ensure perf_limit_reasons sysfs files are created only for Gen11+. Otherwise on Gen < 5 accessing these files results in the following oops: <1> [88.829420] BUG: unable to handle page fault for address: ffffc90000bb81a8 <1> [88.829438] #PF: supervisor read access in kernel mode <1> [88.829447] #PF: error_code(0x0000) - not-present page This patch is a backport of the drm-tip commit 0d2d201095e9 ("drm/i915: Perf_limit_reasons are only available for Gen11+") to drm-intel-fixes. The backport is not identical to the original, it only includes the sysfs portions of if. The debugfs portion is not available in drm-intel-fixes so has not been backported. Bspec: 20008 Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6863 Fixes: fa68bff7cf27 ("drm/i915/gt: Add sysfs throttle frequency interfaces") Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220919162401.2077713-1-ashutosh.dixit@intel.com (backported from commit 0d2d201095e9f141d6a9fb44320afce761f8b5c2)
2022-09-28clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocksHan Xu
There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag should not be used. For instance, the default parent clock for QSPI is pll2_bus, which is also the parent clock for quite a few modules, such as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system hang due to pll2_bus rate changed. Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API") Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com Tested-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-28Merge tag 'irq_urgent_for_v6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more irqchip fixes from Borislav Petkov: "More irqchip fixes for 6.0 from Marc Zyngier. Stuff got left hanging due to the whole Plumbers and vacations commotion. - A couple of configuration fixes for the recently merged Loongarch drivers - A fix to avoid dynamic allocation of a cpumask which was causing issues with PREEMPT_RT and the GICv3 ITS - A tightening of an error check in the stm32 exti driver" * tag 'irq_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/loongson-pch-lpc: Add dependence on LoongArch irqchip: Select downstream irqchip drivers for LoongArch CPU irqchip/gic-v3-its: Remove cpumask_var_t allocation irqchip/stm32-exti: Remove check on always false condition
2022-09-28Merge tag 'mmc-v6.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes. This time there is also a fix for the ARM SCMI firmware driver, which has been acked by Sudeep Holla, the maintainer. MMC core: - Terminate infinite loop in SD-UHS voltage switch MMC host: - hsq: Fix kernel crash in the recovery path - moxart: Fix bus width configurations - sdhci: Fix kernel panic for cqe irq ARM_SCMI: - Fixup clock management by reverting 'firmware: arm_scmi: Add clock management to the SCMI power domain'" * tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: hsq: Fix data stomping during mmc recovery Revert "firmware: arm_scmi: Add clock management to the SCMI power domain" mmc: core: Terminate infinite loop in SD-UHS voltage switch mmc: moxart: fix 4-bit bus width and remove 8-bit bus width mmc: sdhci: Fix host->cmd is null
2022-09-28[coredump] don't use __kernel_write() on kmap_local_page()Al Viro
passing kmap_local_page() result to __kernel_write() is unsafe - random ->write_iter() might (and 9p one does) get unhappy when passed ITER_KVEC with pointer that came from kmap_local_page(). Fix by providing a variant of __kernel_write() that takes an iov_iter from caller (__kernel_write() becomes a trivial wrapper) and adding dump_emit_page() that parallels dump_emit(), except that instead of __kernel_write() it uses __kernel_write_iter() with ITER_BVEC source. Fixes: 3159ed57792b "fs/coredump: use kmap_local_page()" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-09-28Merge tag 'clk-microchip-fixes-6.0' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-fixes Pull Microchip clock fixes for Polarfire SoCs: - fix panic at boot in clock initialization when building with clang-15 - make RTC's AHB clock critical as rtc will stop if the AHB interface clock is disabled * tag 'clk-microchip-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: clk: microchip: mpfs: make the rtc's ahb clock critical clk: microchip: mpfs: fix clk_cfg array bounds violation
2022-09-28Merge tag 'linux-can-fixes-for-6.0-20220928' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-09-28 The patch is by me and targets the c_can driver. It disables an optimization in the TX path of C_CAN cores which causes problems. * tag 'linux-can-fixes-for-6.0-20220928' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: c_can: don't cache TX messages for C_CAN cores ==================== Link: https://lore.kernel.org/r/20220928090629.1124190-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28x86/cacheinfo: Add a cpu_llc_shared_mask() UP variantBorislav Petkov
On a CONFIG_SMP=n kernel, the LLC shared mask is 0, which prevents __cache_amd_cpumap_setup() from doing the L3 masks setup, and more specifically from setting up the shared_cpu_map and shared_cpu_list files in sysfs, leading to lscpu from util-linux getting confused and segfaulting. Add a cpu_llc_shared_mask() UP variant which returns a mask with a single bit set, i.e., for CPU0. Fixes: 2b83809a5e6d ("x86/cpu/amd: Derive L3 shared_cpu_map from cpu_llc_shared_mask") Reported-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1660148115-302-1-git-send-email-ssengar@linux.microsoft.com
2022-09-28Revert "net: set proper memcg for net_init hooks allocations"Shakeel Butt
This reverts commit 1d0403d20f6c281cb3d14c5f1db5317caeec48e9. Anatoly Pugachev reported that the commit 1d0403d20f6c ("net: set proper memcg for net_init hooks allocations") is somehow causing the sparc64 VMs failed to boot and the VMs boot fine with that patch reverted. So, revert the patch for now and later we can debug the issue. Link: https://lore.kernel.org/all/20220918092849.GA10314@u164.east.ru/ Reported-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Vasily Averin <vvs@openvz.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: cgroups@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Tested-by: Anatoly Pugachev <matorola@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Fixes: 1d0403d20f6c ("net: set proper memcg for net_init hooks allocations") Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-09-28perf arm-spe: augment the data source type with neoverse_spe listJing Zhang
When synthesizing event with SPE data source, commit 4e6430cbb1a9("perf arm-spe: Use SPE data source for neoverse cores") augment the type with source information by MIDR. However, is_midr_in_range only compares the first entry in neoverse_spe. Change is_midr_in_range to is_midr_in_range_list to traverse the neoverse_spe array so that all neoverse cores synthesize event with data source packet. Fixes: 4e6430cbb1a9f1dc ("perf arm-spe: Use SPE data source for neoverse cores") Reviewed-by: Ali Saidi <alisaidi@amazon.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Timothy Hayes <timothy.hayes@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zhuo Song <zhuo.song@linux.alibaba.com> Link: https://lore.kernel.org/r/1664197396-42672-1-git-send-email-renyu.zj@linux.alibaba.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-28perf tests vmlinux-kallsyms: Update is_ignored_symbol function to match the ↵Athira Rajeev
kernel ignored list The testcase “vmlinux-kallsyms.c” fails in powerpc. vmlinux symtab matches kallsyms: FAILED! This test look at the symbols in the vmlinux DSO and check if we find all of them in the kallsyms dso. But from the powerpc logs , observed that the failure happens for: ERR : 0xc0000000000fe9c8: .Lmfspr_table not on kallsyms ERR : 0xc0000000001009c8: .Lmtspr_table not on kallsyms These are labels ( with .L) in the source code and has to be ignored. Reference code with .Lmtspr_table: arch/powerpc/xmon/spr_access.S The testcases invokes is_ignored_symbol() function to ignore hidden symbols in the dso like local symbols. This function is adapted from is_ignored_symbol() kernel function in code: scripts/kallsyms.c . The kernel function got some updates which is not reflected in the testcase function and the new updates also handles ignoring "labels". Below is the changes that went in the kernel function. /* Symbol names that begin with the following are ignored.*/ static const char * const ignored_prefixes[] = { "$", /* local symbols for ARM, MIPS, etc. */ - ".LASANPC", /* s390 kasan local symbols */ + ".L", /* local labels, .LBB,.Ltmpxxx,.L__unnamed_xx,.LASANPC, etc. */ "__crc_", /* modversions */ "__efistub_", /* arm64 EFI stub namespace */ - "__kvm_nvhe_", /* arm64 non-VHE KVM namespace */ + "__kvm_nvhe_$", /* arm64 local symbols in non-VHE KVM namespace */ + "__kvm_nvhe_.L", /* arm64 local symbols in non-VHE KVM namespace */ "__AArch64ADRPThunk_", /* arm64 lld */ "__ARMV5PILongThunk_", /* arm lld */ "__ARMV7PILongThunk_", This change is part of below commits and will handle the symbols with “.L” commit d4c858643263 ("kallsyms: ignore all local labels prefixed by '.L'") commit 6ccf9cb557bd ("KVM: arm64: Symbolize the nVHE HYP addresses") Update the testcase function to include the new changes. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220928045218.37322-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-15 13:03:32 +0000