summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-06fuse: fix LOOKUP vs INIT compat handlingMiklos Szeredi
Analysis from Marc: "Commit 7078187a795f ("fuse: introduce fuse_simple_request() helper") from the above pull request triggers some EIO errors for me in some tests that rely on fuse Looking at the code changes and a bit of debugging info I think there's a general problem here that fuse_get_req checks and possibly waits for fc->initialized, and this was always called first. But this commit changes the ordering and in many places fc->minor is now possibly used before fuse_get_req, and we can't be sure that fc has been initialized. In my case fuse_lookup_init sets req->out.args[0].size to the wrong size because fc->minor at that point is still 0, leading to the EIO error." Fix by moving the compat adjustments into fuse_simple_request() to after fuse_get_req(). This is also more readable than the original, since now compatibility is handled in a single function instead of cluttering each operation. Reported-by: Marc Dionne <marc.c.dionne@gmail.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Fixes: 7078187a795f ("fuse: introduce fuse_simple_request() helper")
2015-01-05NFSv4: Remove incorrect check in can_open_delegated()Trond Myklebust
Remove an incorrect check for NFS_DELEGATION_NEED_RECLAIM in can_open_delegated(). We are allowed to cache opens even in a situation where we're doing reboot recovery. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-05NFS: Ignore transport protocol when detecting server trunkingChuck Lever
Detect server trunking across transport protocols. Otherwise, an RDMA mount and a TCP mount of the same server will end up with separate nfs_clients using the same clientid4. Reported-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-05NFSv4/v4.1: Verify the client owner id during trunking detectionTrond Myklebust
While we normally expect the NFSv4 client to always send the same client owner to all servers, there are a couple of situations where that is not the case: 1) In NFSv4.0, switching between use of '-omigration' and not will cause the kernel to switch between using the non-uniform and uniform client strings. 2) In NFSv4.1, or NFSv4.0 when using uniform client strings, if the uniquifier string is suddenly changed. This patch will catch those situations by checking the client owner id in the trunking detection code, and will do the right thing if it notices that the strings differ. Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-05NFSv4: Cache the NFSv4/v4.1 client owner_id in the struct nfs_clientTrond Myklebust
Ensure that we cache the NFSv4/v4.1 client owner_id so that we can verify it when we're doing trunking detection. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-05NFSv4.1: Fix client id trunking on LinuxTrond Myklebust
Currently, our trunking code will check for session trunking, but will fail to detect client id trunking. This is a problem, because it means that the client will fail to recognise that the two connections represent shared state, even if they do not permit a shared session. By removing the check for the server minor id, and only checking the major id, we will end up doing the right thing in both cases: we close down the new nfs_client and fall back to using the existing one. Fixes: 05f4c350ee02e ("NFS: Discover NFSv4 server trunking when mounting") Cc: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # 3.7.x Tested-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-05LOCKD: Fix a race when initialising nlmsvc_timeoutTrond Myklebust
This commit fixes a race whereby nlmclnt_init() first starts the lockd daemon, and then calls nlm_bind_host() with the expectation that nlmsvc_timeout has already been initialised. Unfortunately, there is no no synchronisation between lockd() and lockd_up() to guarantee that this is the case. Fix is to move the initialisation of nlmsvc_timeout into lockd_create_svc Fixes: 9a1b6bf818e74 ("LOCKD: Don't call utsname()->nodename...") Cc: Bruce Fields <bfields@fieldses.org> Cc: stable@vger.kernel.org # 3.10.x Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-05Linux 3.19-rc3Linus Torvalds
2015-01-06int340x_thermal/processor_thermal_device: return failure whenZhang Rui
there is no ACPI device object processor_thermal_device driver needs ACPI support to work. Thus, the driver probing should fail when there is no ACPI device object asscociated. This fixes a NULL pointer dereference when the driver is loaded with INT340X feature disabled in BIOS. Reported-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Chen Yu <yu.c.chen@intel.com>
2015-01-06ACPI/int340x_thermal: enumerate INT3401 for Intel SoC DTS thermal driverZhang Rui
Intel SoC DTS thermal driver on Baytrail platform uses IRQ 86 for critical overheating notification. But this IRQ 86 is described in the _CRS control method of INT3401 device, thus we should enumerate INT3401 to set the IRQ descriptor when Intel SoC DTS thermal driver is built. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2015-01-06ACPI/int340x_thermal: enumerate INT340X devices even if they're not in _ART/_TRTZhang Rui
For some INT340X thermal devices, even if they are not referred in _TRT/_ART table, they still can be used by userspace for thermal control. Thus change the code to enumerated all the INT340X devices, no matter if they're referred in _TRT/_ART or not. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2015-01-05ARM: dts: dra7-evm: fix qspi device tree partition sizeMugunthan V N
64KiB is allocated for qspi dtb partition which is not sufficient, so updating the partition table size to 512KiB for device tree partition. This also aligns the QSPI partition definitions between kernel and U-Boot. Fixes: dc2dd5b8 ("ARM: dts: dra7: Add qspi device") Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-05ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DTNishanth Menon
CONFIG_GENERIC_CPUFREQ_CPU0 disappeared with commit bbcf071969b20f ("cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'") Use the renamed CONFIG_CPUFREQ_DT generic driver. It looks like with v3.18-rc1, commit bbcf071969b20f and fdc509b15eb3eb came in via different trees causing the resultant v3.18-rc1 to be non-functional for cpufreq as default supported with omap2plus_defconfig. Fixes: fdc509b15eb3eb ("ARM: omap2plus_defconfig: Add cpufreq to defconfig") Cc: <stable@vger.kernel.org> # 3.18 Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-05ARM: OMAP2+: Fix n900 board name for legacy user spaceTony Lindgren
N900 legacy user space apps need the board name in /proc/cpuinfo to work properly for the Hardware entry. For other boards this should not be an issues and they can use the generic Hardware entry. Let's fix the issue by adding a custom DT_MACHINE_START for n900. Tested-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-05ARM: omap5/dra7xx: Enable booting secondary CPU in HYP modeLennart Sorensen
If the boot loader enables HYP mode on the boot CPU, the secondary CPU also needs to call into the ROM to switch to HYP mode before booting. The firmwares on the omap5 and dra7xx unfortunately do not take care of this, so it has to be handled by the kernel. This patch is based on "[PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs" by Santosh Shilimkar <santosh.shilimkar@ti.com>, except this version does not require a compile time CONFIG to control if it should enable HYP mode or not, it simply does it based on the mode of the boot CPU, so it works whether the CPU boots in SVC or HYP mode, and should even work as a guest kernel inside kvm if qemu decides to support emulating the omap5 or dra7xx. Cc: stable@vger.kernel.org #v3.16+ Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-05ARM: dra7xx: Fix counter frequency drift for AM572x errata i856Lennart Sorensen
Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external crystal is not enabled at power up. Instead the CPU falls back to using an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually 20MHz on boards so far (which gives an emulated frequency of 32.786KHz), but can also be 19.2 or 27MHz which result in much larger drift. Since this is used to drive the master counter at 32.768KHz * 375 / 2 = 6.144MHz, the emulated speed for 20MHz is of by 570ppm, or about 43 seconds per day, and more than the 500ppm NTP is able to tolerate. Checking the CTRL_CORE_BOOTSTRAP register can determine if the CPU is using the real 32.768KHz crystal or the emulated SYSCLK1/610, and by known that the real counter frequency can be determined and used. The real speed is then SYSCLK1 / 610 * 375 / 2 or SYSCLK1 * 75 / 244. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-05ARM: omap5/dra7xx: Fix frequency typosLennart Sorensen
The switch statement of the possible list of SYSCLK1 frequencies is missing a 0 in 4 out of the 7 frequencies. Fixes: fa6d79d27614 ("ARM: OMAP: Add initialisation for the real-time counter") Cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-05Merge tag 'powerpc-3.19-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - Wire up sys_execveat(). Tested on 32 & 64 bit. - Fix for kdump on LE systems with cpus hot unplugged. - Revert Anton's fix for "kernel BUG at kernel/smpboot.c:134!", this broke other platforms, we'll do a proper fix for 3.20. * tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active and online" powerpc/kdump: Ignore failure in enabling big endian exception during crash powerpc: Wire up sys_execveat() syscall
2015-01-05ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()Hanjun Guo
acpi_map_lsapic() will allocate a logical CPU number and map it to physical CPU id (such as APIC id) for the hot-added CPU, it will also do some mapping for NUMA node id and etc, acpi_unmap_lsapic() will do the reverse. We can see that the name of the function is a little bit confusing and arch (IA64) dependent so rename them as acpi_(un)map_cpu() to make arch agnostic and explicit. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-05ACPI / processor: Convert apic_id to phys_id to make it arch agnosticHanjun Guo
apic_id in MADT table is the CPU hardware id which identify it self in the system for x86 and ia64, OSPM will use it for SMP init to map APIC ID to logical cpu number in the early boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the ACPI processor driver is probed and the driver will use acpi_id in DSDT to get the apic_id, then map to the logical cpu number which is needed by the processor driver. Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec, so apic_id is used both in arch code and ACPI core which is pretty fine. Since ACPI 5.0, ARM is supported by ACPI and APIC is not available on ARM, this will confuse people when apic_id is both used by x86 and ARM in one function. So convert apic_id to phys_id (which is the original meaning) in ACPI processor dirver to make it arch agnostic, but leave the arch dependent code unchanged, no functional change. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-05Merge tag 'please-pull-syscall' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 fixlet from Tony Luck: "Add execveat syscall" * tag 'please-pull-syscall' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable execveat syscall for ia64
2015-01-05ACPI / PM: Fix PM initialization for devices that are not presentRafael J. Wysocki
If an ACPI device object whose _STA returns 0 (not present and not functional) has _PR0 or _PS0, its power_manageable flag will be set and acpi_bus_init_power() will return 0 for it. Consequently, if such a device object is passed to the ACPI device PM functions, they will attempt to carry out the requested operation on the device, although they should not do that for devices that are not present. To fix that problem make acpi_bus_init_power() return an error code for devices that are not present which will cause power_manageable to be cleared for them as appropriate in acpi_bus_get_power_flags(). However, the lists of power resources should not be freed for the device in that case, so modify acpi_bus_get_power_flags() to keep those lists even if acpi_bus_init_power() returns an error. Accordingly, when deciding whether or not the lists of power resources need to be freed, acpi_free_power_resources_lists() should check the power.flags.power_resources flag instead of flags.power_manageable, so make that change too. Furthermore, if acpi_bus_attach() sees that flags.initialized is unset for the given device, it should reset the power management settings of the device and re-initialize them from scratch instead of relying on the previous settings (the device may have appeared after being not present previously, for example), so make it use the 'valid' flag of the D0 power state as the initial value of flags.power_manageable for it and call acpi_bus_init_power() to discover its current power state. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
2015-01-05MAINTAINERS: update ti-soc-thermal statusEduardo Valentin
Changing to Maintained. Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-05MAINTAINERS: Add linux-omap to list of reviewers for TI ThermalNishanth Menon
Add linux-omap mailing list to the TI THERMAL list for wider review. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-05spi: dw-mid: fix FIFO sizeAndy Shevchenko
The FIFO size is 40 accordingly to the specifications, but this means 0x40, i.e. 64 bytes. This patch fixes the typo and enables FIFO size autodetection for Intel MID devices. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-05thermal: of: Remove bogus type qualifier for of_thermal_get_trip_points()Geert Uytterhoeven
With gcc 4.1.2, 4.2, and 4.2.4 (4.4 and later are OK): drivers/thermal/thermal_core.h:110: warning: type qualifiers ignored on function return type Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: ce8be7785922de0e ("thermal: of: Extend of-thermal to export table of trip points") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-05[IA64] Enable execveat syscall for ia64Tony Luck
See commit 51f39a1f0cea1cacf8c787f652f26dfee9611874 syscalls: implement execveat() system call Signed-off-by: Tony Luck <tony.luck@intel.com>
2015-01-05spi: dw: Fix detecting FIFO depthAxel Lin
Current code tries to find the highest valid fifo depth by checking the value it wrote to DW_SPI_TXFLTR. There are a few problems in current code: 1) There is an off-by-one in dws->fifo_len setting because it assumes the latest register write fails so the latest valid value should be fifo - 1. 2) We know the depth could be from 2 to 256 from HW spec, so it is not necessary to test fifo == 257. In the case fifo is 257, it means the latest valid setting is fifo = 256. So after the for loop iteration, we should check fifo == 2 case instead of fifo == 257 if detecting the FIFO depth fails. This patch fixes above issues. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-and-tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-05qla2xxx: fix busy wait regressionBruno Prémont
Commit e05fe29248 (qla2xxx: Honor FCP_RSP retry delay timer field.) causes systems to busy-wait for about 3 minutes after boot prior to detecting SAN disks. During this wait period one kworker is running full-time (though /proc/<pid>/stack has no useful data). Another kworker is waiting for IO to complete during that whole time period. Looking at drivers/scsi/qla2xxx/qla_os.c, fcport->retry_delay_timestamp has a special value of 0 though that 0 value forces system to wait when jiffies is very large value (e.g. 4294952605 - "negative" value when signed on 32bit systems). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-05drm/radeon: integer underflow in radeon_cp_dispatch_texture()Dan Carpenter
The test: if (size > RADEON_MAX_TEXTURE_SIZE) { "size" is an integer and it's controled by the user so it can be negative and the test can underflow. Later we use "size" in: dwords = size / 4; ... RADEON_COPY_MT(buffer, data, (int)(dwords * sizeof(u32))); It causes memory corruption to copy a negative size buffer. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-01-05drm/radeon: adjust default bapm settings for KVAlex Deucher
Enabling bapm seems to cause clocking problems on some KV configurations. Disable it by default for now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-01-05drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hwAlex Deucher
The check was already in place in the dp mode_valid check, but radeon_dp_get_dp_link_clock() never returned the high clock mode_valid was checking for because that function clipped the clock based on the hw capabilities. Add an explicit check in the mode_valid function. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87172 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc:stable@vge.kernel.org
2015-01-05drm/radeon: fix sad_count check for dce3Alex Deucher
Make it consistent with the sad code for other asics to deal with monitors that don't report sads. bug: https://bugzilla.kernel.org/show_bug.cgi?id=89461 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-01-05drm/radeon: KV has three PPLLs (v2)Alex Deucher
Enable all three in the driver. Early documentation indicated the 3rd one was used for something else, but that is not the case. v2: handle disable as well Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-01-05libata: export ata_get_cmd_descript()Andy Shevchenko
The driver sata_dwc_460ex is using this symbol. To build it as a module we have to have the symbol exported. This patch adds EXPORT_SYMBOL_GPL() macro for that. tj: Updated to use EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() as the only known user is an in-tree driver. Suggested by Sergei. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
2015-01-05KEYS: close race between key lookup and freeingSasha Levin
When a key is being garbage collected, it's key->user would get put before the ->destroy() callback is called, where the key is removed from it's respective tracking structures. This leaves a key hanging in a semi-invalid state which leaves a window open for a different task to try an access key->user. An example is find_keyring_by_name() which would dereference key->user for a key that is in the process of being garbage collected (where key->user was freed but ->destroy() wasn't called yet - so it's still present in the linked list). This would cause either a panic, or corrupt memory. Fixes CVE-2014-9529. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-01-05ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode ↵Suman Tripathi
command. This patch addresses the issue with ATA_CMD_PACKET pio mode command for enumeration and device detection with ATAPI devices. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-05ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller ↵Suman Tripathi
driver. This patch fixes the big endian mode issue with function xgene_ahci_read_id. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-05drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS)Ben Goz
This patch fixes a bug where deallocate_vmid() didn't actually unmap the VMID<-->PASID mapping (in the registers). That can cause undefined behavior. This bug only occurs in non-HWS mode. Signed-off-by: Ben Goz <ben.goz@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
2015-01-05clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcastMagnus Damm
Update the TMU driver to use cpu_possible_mask as cpumask to make r8a7779 SMP work as expected with or without the ARM TWD timer. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-01-05clocksource: kona: fix __iomem annotationOlof Johansson
It makes no sense to hide the __iomem annotation from the function that uses it, especially since it causes a sparse warning: drivers/clocksource/bcm_kona_timer.c:118:38: warning: incorrect type in argument 1 (different address spaces) drivers/clocksource/bcm_kona_timer.c:118:38: expected void *timer_base drivers/clocksource/bcm_kona_timer.c:118:38: got void [noderef] <asn:2>*static [toplevel] tmr_regs Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-01-05clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_writeTobias Jakobi
EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask produces a number outside the range 0x00 to 0xff, which always results in execution of the default switch statement. Obviously this is wrong and git history shows that the bitmask inversion was incorrectly set during a refactoring of the MCT code. Fix this by putting the inversion at the correct position again. Cc: stable@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reported-by: GP Orcullo <kinsamanka@gmail.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-01-05ARM: imx6sx: Set PLL2 as parent of QSPI clocksFabio Estevam
The default qspi2_clk_sel field of register CCM_CS2CDR contains '110' which is marked as 'reserved', so we can't rely on the default value. Provide a proper parent for QSPI clocks to avoid a kernel oops: [ 1.037920] Division by zero in kernel. [ 1.041807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc7-next-20141204-00002-g5aa23e1 #2143 [ 1.050967] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 1.056853] Backtrace: [ 1.059360] [<80011ea0>] (dump_backtrace) from [<8001203c>] (show_stack+0x18/0x1c) [ 1.066982] r6:00000000 r5:00000000 r4:00000000 r3:00000000 [ 1.072754] [<80012024>] (show_stack) from [<806b7100>] (dump_stack+0x88/0xa4) [ 1.080038] [<806b7078>] (dump_stack) from [<80011d20>] (__div0+0x18/0x20) [ 1.086958] r5:be018500 r4:be017c00 [ 1.090600] [<80011d08>] (__div0) from [<802aa418>] (Ldiv0+0x8/0x10) [ 1.097012] [<80504fbc>] (clk_divider_set_rate) from [<80503ddc>] (clk_change_rate+0x14c/0x17c) [ 1.105759] r7:00000000 r6:00000000 r5:be018500 r4:00000000 [ 1.111516] [<80503c90>] (clk_change_rate) from [<80503ea0>] (clk_set_rate+0x94/0x98) [ 1.119391] r8:be7e0368 r7:00000000 r6:be11a000 r5:be018500 r4:00000000 r3:00000000 [ 1.127290] [<80503e0c>] (clk_set_rate) from [<80410558>] (fsl_qspi_probe+0x23c/0x75c) [ 1.135260] r5:be11a010 r4:be350010 [ 1.138900] [<8041031c>] (fsl_qspi_probe) from [<80385a18>] (platform_drv_probe+0x50/0xac) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-05ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecsTakashi Iwai
stac_store_hints() does utterly wrong for masking the values for gpio_dir and gpio_data, likely due to copy&paste errors. Fortunately, this feature is used very rarely, so the impact must be really small. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-05iommu/rockchip: Drop owner assignment from platform_driversWolfram Sang
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-01-05iommu/vt-d: Remove dead code in device_notifierJoerg Roedel
This code only runs when action == BUS_NOTIFY_REMOVED_DEVICE, so it can't be BUS_NOTIFY_DEL_DEVICE. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-01-05iommu/vt-d: Fix dmar_domain leak in iommu_attach_deviceJoerg Roedel
Since commit 1196c2f a domain is only destroyed in the notifier path if it is hot-unplugged. This caused a domain leakage in iommu_attach_device when a driver was unbound from the device and bound to VFIO. In this case the device is attached to a new domain and unlinked from the old domain. At this point nothing points to the old domain anymore and its memory is leaked. Fix this by explicitly freeing the old domain in iommu_attach_domain. Fixes: 1196c2f (iommu/vt-d: Fix dmar_domain leak in iommu_attach_device) Cc: stable@vger.kernel.org # v3.18 Tested-by: Jerry Hoemann <jerry.hoemann@hp.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-01-05iommu/ipmmu-vmsa: Change IOMMU_EXEC to IOMMU_NOEXECLaurent Pinchart
Commit a720b41c41f5a7e4 ("iommu/arm-smmu: change IOMMU_EXEC to IOMMU_NOEXEC") has inverted and replaced the IOMMU_EXEC flag with IOMMU_NOEXEC. Update the driver accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-01-05crypto: sha-mb - Add avx2_supported check.Vinson Lee
This patch fixes this allyesconfig target build error with older binutils. LD arch/x86/crypto/built-in.o ld: arch/x86/crypto/sha-mb/built-in.o: No such file: No such file or directory Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Vinson Lee <vlee@twitter.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-05crypto: aesni - fix "by8" variant for 128 bit keysMathias Krause
The "by8" counter mode optimization is broken for 128 bit keys with input data longer than 128 bytes. It uses the wrong key material for en- and decryption. The key registers xkey0, xkey4, xkey8 and xkey12 need to be preserved in case we're handling more than 128 bytes of input data -- they won't get reloaded after the initial load. They must therefore be (a) loaded on the first iteration and (b) be preserved for the latter ones. The implementation for 128 bit keys does not comply with (a) nor (b). Fix this by bringing the implementation back to its original source and correctly load the key registers and preserve their values by *not* re-using the registers for other purposes. Kudos to James for reporting the issue and providing a test case showing the discrepancies. Reported-by: James Yonan <james@openvpn.net> Cc: Chandramouli Narayanan <mouli@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.18 Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-07-19 17:33:30 +0000