summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-11i2c: microchip-corei2c: fix erroneous late ack sendConor Dooley
A late ack is currently being sent at the end of a transfer due to incorrect logic in mchp_corei2c_empty_rx(). Currently the Assert Ack bit is being written to the controller's control reg after the last byte has been received, causing it to sent another byte with the ack. Instead, the AA flag should be written to the control register when the penultimate byte is read so it is sent out for the last byte. Reported-by: Andreas Buerkler <andreas.buerkler@enclustra.com> Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers") Tested-by: Lewis Hanly <lewis.hanly@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> [wsa: fixed typos in commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11dt-bindings: i2c: qcom,i2c-cci: convert to dtschemaKrzysztof Kozlowski
Convert the Qualcomm Camera Control Interface (CCI) I2C controller to DT schema. The original bindings were not complete, so this includes changes: 1. Add address/size-cells. 2. Describe the clocks per variant. 3. Use more descriptive example based on sdm845. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: qcom-geni: Fix GPI DMA buffer sync-backRobin Reckmann
Fix i2c transfers using GPI DMA mode for all message types that do not set the I2C_M_DMA_SAFE flag (e.g. SMBus "read byte"). In this case a bounce buffer is returned by i2c_get_dma_safe_msg_buf(), and it has to synced back to the message after the transfer is done. Add missing assignment of dma buffer in geni_i2c_gpi(). Set xferred in i2c_put_dma_safe_msg_buf() to true in case of no error to ensure the sync-back of this dma buffer to the message. Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Signed-off-by: Robin Reckmann <robin.reckmann@gmail.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70Dennis P. Kliem
ADATA XPG GAMMIX S70 reports bogus eui64 values that appear to be the same across all drives. Quirk them out so they are not marked as "non globally unique" duplicates. Signed-off-by: Dennis P. Kliem <dpkliem@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-11vdpa_sim_blk: add support for discard and write-zeroesStefano Garzarella
Expose VIRTIO_BLK_F_DISCARD and VIRTIO_BLK_F_WRITE_ZEROES features to the drivers and handle VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES requests checking ranges and flags. The simulator behaves like a ramdisk, so for VIRTIO_BLK_F_DISCARD does nothing, while for VIRTIO_BLK_T_WRITE_ZEROES sets to 0 the specified region. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220811083632.77525-5-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSHStefano Garzarella
The simulator behaves like a ramdisk, so we don't have to do anything when a VIRTIO_BLK_T_FLUSH request is received, but it could be useful to test driver behavior. Let's expose the VIRTIO_BLK_F_FLUSH feature to inform the driver that we support the flush command. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220811083632.77525-4-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vdpa_sim_blk: make vdpasim_blk_check_range usable by other requestsStefano Garzarella
Next patches will add handling of other requests, where will be useful to reuse vdpasim_blk_check_range(). So let's make it more generic by adding the `max_sectors` parameter, since different requests allow different numbers of maximum sectors. Let's also print the messages directly in vdpasim_blk_check_range() to avoid duplicate prints. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220811083632.77525-3-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vdpa_sim_blk: check if sector is 0 for commands other than read or writeStefano Garzarella
VIRTIO spec states: "The sector number indicates the offset (multiplied by 512) where the read or write is to occur. This field is unused and set to 0 for commands other than read or write." Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220811083632.77525-2-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vdpa_sim: Implement suspend vdpa opEugenio Pérez
Implement suspend operation for vdpa_sim devices, so vhost-vdpa will offer that backend feature and userspace can effectively suspend the device. This is a must before get virtqueue indexes (base) for live migration, since the device could modify them after userland gets them. There are individual ways to perform that action for some devices (VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no way to perform it for any vhost device (and, in particular, vhost-vdpa). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20220810171512.2343333-5-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vhost-vdpa: uAPI to suspend the deviceEugenio Pérez
The ioctl adds support for suspending the device from userspace. This is a must before getting virtqueue indexes (base) for live migration, since the device could modify them after userland gets them. There are individual ways to perform that action for some devices (VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no way to perform it for any vhost device (and, in particular, vhost-vdpa). After a successful return of the ioctl call the device must not process more virtqueue descriptors. The device can answer to read or writes of config fields as if it were not suspended. In particular, writing to "queue_enable" with a value of 1 will not make the device start processing buffers of the virtqueue. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20220810171512.2343333-4-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vhost-vdpa: introduce SUSPEND backend feature bitEugenio Pérez
Userland knows if it can suspend the device or not by checking this feature bit. It's only offered if the vdpa driver backend implements the suspend() operation callback, and to offer it or userland to ack it if the backend does not offer that callback is an error. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20220810171512.2343333-3-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vdpa: Add suspend operationEugenio Pérez
This operation is optional: It it's not implemented, backend feature bit will not be exposed. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20220810171512.2343333-2-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio-blk: Avoid use-after-free on suspend/resumeShigeru Yoshida
hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is freed on suspend and reallocated on resume. So, hctx->user_data is invalid after resume, and it will cause use-after-free accessing which will result in the kernel crash something like below: [ 22.428391] Call Trace: [ 22.428899] <TASK> [ 22.429339] virtqueue_add_split+0x3eb/0x620 [ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0 [ 22.430789] ? kvm_clock_get_cycles+0x14/0x30 [ 22.431496] virtqueue_add_sgs+0xad/0xd0 [ 22.432108] virtblk_add_req+0xe8/0x150 [ 22.432692] virtio_queue_rqs+0xeb/0x210 [ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280 [ 22.434059] __blk_flush_plug+0xe1/0x140 [ 22.434853] blk_finish_plug+0x20/0x40 [ 22.435512] read_pages+0x20a/0x2e0 [ 22.436063] ? folio_add_lru+0x62/0xa0 [ 22.436652] page_cache_ra_unbounded+0x112/0x160 [ 22.437365] filemap_get_pages+0xe1/0x5b0 [ 22.437964] ? context_to_sid+0x70/0x100 [ 22.438580] ? sidtab_context_to_sid+0x32/0x400 [ 22.439979] filemap_read+0xcd/0x3d0 [ 22.440917] xfs_file_buffered_read+0x4a/0xc0 [ 22.441984] xfs_file_read_iter+0x65/0xd0 [ 22.442970] __kernel_read+0x160/0x2e0 [ 22.443921] bprm_execve+0x21b/0x640 [ 22.444809] do_execveat_common.isra.0+0x1a8/0x220 [ 22.446008] __x64_sys_execve+0x2d/0x40 [ 22.446920] do_syscall_64+0x37/0x90 [ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by getting vq from vblk, and removes virtblk_init_hctx(). Fixes: 4e0400525691 ("virtio-blk: support polling I/O") Cc: "Suwan Kim" <suwan.kim027@gmail.com> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Message-Id: <20220810160948.959781-1-syoshida@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_vdpa: support the arg sizes of find_vqs()Bo Liu
Virtio vdpa support the new parameter sizes of find_vqs(). Signed-off-by: Bo Liu <liubo03@inspur.com> Message-Id: <20220810085151.7251-1-liubo03@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vhost-vdpa: Call ida_simple_remove() when failedBo Liu
In function vhost_vdpa_probe(), when code execution fails, we should call ida_simple_remove() to free ida. Signed-off-by: Bo Liu <liubo03@inspur.com> Message-Id: <20220805091254.20026-1-liubo03@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vDPA: fix 'cast to restricted le16' warnings in vdpa.cZhu Lingshan
This commit fixes spars warnings: cast to restricted __le16 in function vdpa_dev_net_config_fill() and vdpa_fill_stats_rec() Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Message-Id: <20220722115309.82746-7-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vDPA: !FEATURES_OK should not block querying device config spaceZhu Lingshan
Users may want to query the config space of a vDPA device, to choose a appropriate one for a certain guest. This means the users need to read the config space before FEATURES_OK, and the existence of config space contents does not depend on FEATURES_OK. The spec says: The device MUST allow reading of any device-specific configuration field before FEATURES_OK is set by the driver. This includes fields which are conditional on feature bits, as long as those feature bits are offered by the device. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20220722115309.82746-5-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vDPA/ifcvf: support userspace to query features and MQ of a management deviceZhu Lingshan
Adapting to current netlink interfaces, this commit allows userspace to query feature bits and MQ capability of a management device. Currently both the vDPA device and the management device are the VF itself, thus this ifcvf should initialize the virtio capabilities in probe() before setting up the struct vdpa_mgmt_dev. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20220722115309.82746-3-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vDPA/ifcvf: get_config_size should return a value no greater than dev ↵Zhu Lingshan
implementation Drivers must not access a BAR outside the capability length, and for a virtio device, ifcvf driver should not report any non-standard capability contents to the upper layers. Function ifcvf_get_config_size() is introduced here to return a safe value of the device config capability size. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20220722115309.82746-2-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vhost scsi: Allow user to control num virtqueuesMike Christie
We are currently hard coded to always create 128 IO virtqueues, so this adds a modparam to control it. For large systems where we are ok with using memory for virtqueues it allows us to add up to 1024. This limit was just selected becuase that's qemu's limit. Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20220708030525.5065-3-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vhost-scsi: Fix max number of virtqueuesMike Christie
Qemu takes it's num_queues limit then adds the fixed queues (control and event) to the total it will request from the kernel. So when a user requests 128 (or qemu does it's num_queues calculation based on vCPUS and other system limits), we hit errors due to userspace trying to setup 130 queues when vhost-scsi has a hard coded limit of 128. This has vhost-scsi adjust it's max so we can do a total of 130 virtqueues (128 IO and 2 fixed). For the case where the user has 128 vCPUs the guest OS can then nicely map each IO virtqueue to a vCPU and not have the odd case where 2 vCPUs share a virtqueue. Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20220708030525.5065-2-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vdpa/mlx5: Support different address spaces for control and dataEli Cohen
Partition virtqueues to two different address spaces: one for control virtqueue which is implemented in software, and one for data virtqueues. Based-on: <20220526124338.36247-1-eperezma@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220714113927.85729-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vdpa/mlx5: Implement susupend virtqueue callbackEli Cohen
Implement the suspend callback allowing to suspend the virtqueues so they stop processing descriptors. This is required to allow to query a consistent state of the virtqueue while live migration is taking place. Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220714113927.85729-2-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vduse: Support querying information of IOVA regionsXie Yongji
This introduces a new ioctl: VDUSE_IOTLB_GET_INFO to support querying some information of IOVA regions. Now it can be used to query whether the IOVA region supports userspace memory registration. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Message-Id: <20220803045523.23851-6-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vduse: Support registering userspace memory for IOVA regionsXie Yongji
Introduce two ioctls: VDUSE_IOTLB_REG_UMEM and VDUSE_IOTLB_DEREG_UMEM to support registering and de-registering userspace memory for IOVA regions. Now it only supports registering userspace memory for bounce buffer region in virtio-vdpa case. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220803045523.23851-5-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vduse: Support using userspace pages as bounce bufferXie Yongji
Introduce two APIs: vduse_domain_add_user_bounce_pages() and vduse_domain_remove_user_bounce_pages() to support adding and removing userspace pages for bounce buffers. During adding and removing, the DMA data would be copied from the kernel bounce pages to the userspace bounce pages and back. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220803045523.23851-4-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vduse: Use memcpy_{to,from}_page() in do_bounce()Xie Yongji
kmap_atomic() is being deprecated in favor of kmap_local_page(). The use of kmap_atomic() in do_bounce() is all thread local therefore kmap_local_page() is a sufficient replacement. Convert to kmap_local_page() but, instead of open coding it, use the helpers memcpy_to_page() and memcpy_from_page(). Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Message-Id: <20220803045523.23851-3-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vduse: Remove unnecessary spin lock protectionXie Yongji
Now we use domain->iotlb_lock to protect two different variables: domain->bounce_maps->bounce_page and domain->iotlb. But for domain->bounce_maps->bounce_page, we actually don't need any synchronization between vduse_domain_get_bounce_page() and vduse_domain_free_bounce_pages() since vduse_domain_get_bounce_page() will only be called in page fault handler and vduse_domain_free_bounce_pages() will be called during file release. So let's remove the unnecessary spin lock protection in vduse_domain_get_bounce_page(). Then the usage of domain->iotlb_lock could be more clear: the lock will be only used to protect the domain->iotlb. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220803045523.23851-2-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11net: virtio_net: notifications coalescing supportAlvaro Karsz
New VirtIO network feature: VIRTIO_NET_F_NOTF_COAL. Control a Virtio network device notifications coalescing parameters using the control virtqueue. A device that supports this fetature can receive VIRTIO_NET_CTRL_NOTF_COAL control commands. - VIRTIO_NET_CTRL_NOTF_COAL_TX_SET: Ask the network device to change the following parameters: - tx_usecs: Maximum number of usecs to delay a TX notification. - tx_max_packets: Maximum number of packets to send before a TX notification. - VIRTIO_NET_CTRL_NOTF_COAL_RX_SET: Ask the network device to change the following parameters: - rx_usecs: Maximum number of usecs to delay a RX notification. - rx_max_packets: Maximum number of packets to receive before a RX notification. VirtIO spec. patch: https://lists.oasis-open.org/archives/virtio-comment/202206/msg00100.html Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Message-Id: <20220718091102.498774-1-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11virtio: Check dev_set_name() return valueBo Liu
It's possible that dev_set_name() returns -ENOMEM, catch and handle this. Signed-off-by: Bo Liu <liubo03@inspur.com> Message-Id: <20220707031751.4802-1-liubo03@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11tools/virtio: fix buildStefano Garzarella
Fix the build caused by the following changes: - phys_addr_t is now defined in tools/include/linux/types.h - dev_warn_once() is used in drivers/virtio/virtio_ring.c - linux/uio.h included by vringh.h use INT_MAX defined in limits.h Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220705072249.7867-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vDPA/ifcvf: remove duplicated assignment to pointer cfgColin Ian King
The assignment to pointer cfg is duplicated, the second assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Message-Id: <20220704190456.593464-1-colin.i.king@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vdpa: ifcvf: Fix spelling mistake in commentsZhang Jiaming
There is a typo(does't) in comments. It maybe 'doesn't' instead of 'does't'. Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Message-Id: <20220704024104.15535-1-jiaming@nfschina.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vdpa/mlx5: Use eth_broadcast_addr() to assign broadcast addressXu Qiang
Using eth_broadcast_addr() to assign broadcast address instead of memset(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xu Qiang <xuqiang36@huawei.com> Message-Id: <20220704021405.64545-1-xuqiang36@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vdpa_sim: use max_iotlb_entries as a limit in vhost_iotlb_initStefano Garzarella
Commit bda324fd037a ("vdpasim: control virtqueue support") changed the allocation of iotlbs calling vhost_iotlb_init() for each address space, instead of vhost_iotlb_alloc(). With this change we forgot to use the limit we had introduced with the `max_iotlb_entries` module parameter. Fixes: bda324fd037a ("vdpasim: control virtqueue support") Cc: gautam.dawar@xilinx.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220621151208.189959-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com>
2022-08-11vdpa_sim_blk: set number of address spaces and virtqueue groupsStefano Garzarella
Commit bda324fd037a ("vdpasim: control virtqueue support") added two new fields (nas, ngroups) to vdpasim_dev_attr, but we forgot to initialize them for vdpa_sim_blk. When creating a new vdpa_sim_blk device this causes the kernel to panic in this way:    $ vdpa dev add mgmtdev vdpasim_blk name blk0    BUG: kernel NULL pointer dereference, address: 0000000000000030    ...    RIP: 0010:vhost_iotlb_add_range_ctx+0x41/0x220 [vhost_iotlb]    ...    Call Trace:     <TASK>     vhost_iotlb_add_range+0x11/0x800 [vhost_iotlb]     vdpasim_map_range+0x91/0xd0 [vdpa_sim]     vdpasim_alloc_coherent+0x56/0x90 [vdpa_sim]     ... This happens because vdpasim->iommu[0] is not initialized when dev_attr.nas is 0. Let's fix this issue by initializing both (nas, ngroups) to 1 for vdpa_sim_blk. Fixes: bda324fd037a ("vdpasim: control virtqueue support") Cc: gautam.dawar@xilinx.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220621151323.190431-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com>
2022-08-11vdpa_sim_blk: call vringh_complete_iotlb() also in the error pathStefano Garzarella
Call vringh_complete_iotlb() even when we encounter a serious error that prevents us from writing the status in the "in" header (e.g. the header length is incorrect, etc.). The guest is misbehaving, so maybe the ring is in a bad state, but let's avoid making things worse. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220630153221.83371-4-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vdpa_sim_blk: limit the number of request handled per batchStefano Garzarella
Limit the number of requests (4 per queue as for vdpa_sim_net) handled in a batch to prevent the worker from using the CPU for too long. Suggested-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220630153221.83371-3-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vdpa_sim_blk: use dev_dbg() to print errorsStefano Garzarella
Use dev_dbg() instead of dev_err()/dev_warn() to avoid flooding the host with prints, when the guest driver is misbehaving. In this way, prints can be dynamically enabled when the vDPA block simulator is used to validate a driver. Suggested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220630153221.83371-2-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: support set_ringparamXuan Zhuo
Support set_ringparam based on virtio queue reset. Users can use ethtool -G eth0 <ring_num> to modify the ring size of virtio-net. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-43-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: support tx queue resizeXuan Zhuo
This patch implements the resize function of the tx queues. Based on this function, it is possible to modify the ring num of the queue. Inludes fixup: virtio_net: fix for stuck when change tx ring size with dev down When dev is set to DOWN state, napi has been disabled, if we modify the ring size at this time, we should not call napi_disable() again, which will cause stuck. And all operations are under the protection of rtnl_lock, so there is no need to consider concurrency issues. Message-Id: <20220801063902.129329-42-xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220811080258.79398-3-xuanzhuo@linux.alibaba.com> Reported-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: support rx queue resizeXuan Zhuo
This patch implements the resize function of the rx queues. Based on this function, it is possible to modify the ring num of the queue. Includes fixup: virtio_net: fix for stuck when change rx ring size with dev down When dev is set to DOWN state, napi has been disabled, if we modify the ring size at this time, we should not call napi_disable() again, which will cause stuck. And all operations are under the protection of rtnl_lock, so there is no need to consider concurrency issues. Message-Id: <20220801063902.129329-41-xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220811080258.79398-2-xuanzhuo@linux.alibaba.com> Reported-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: split free_unused_bufs()Xuan Zhuo
This patch separates two functions for freeing sq buf and rq buf from free_unused_bufs(). When supporting the enable/disable tx/rq queue in the future, it is necessary to support separate recovery of a sq buf or a rq buf. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-40-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: get ringparam by virtqueue_get_vring_max_size()Xuan Zhuo
Use virtqueue_get_vring_max_size() in virtnet_get_ringparam() to set tx,rx_max_pending. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-39-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: set the default max ring size by find_vqs()Xuan Zhuo
Use virtio_find_vqs_ctx_size() to specify the maximum ring size of tx, rx at the same time. | rx/tx ring size ------------------------------------------- speed == UNKNOWN or < 10G| 1024 speed < 40G | 4096 speed >= 40G | 8192 Call virtnet_update_settings() once before calling init_vqs() to update speed. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-38-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio: add helper virtio_find_vqs_ctx_size()Xuan Zhuo
Introduce helper virtio_find_vqs_ctx_size() to call find_vqs and specify the maximum size of each vq ring. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-37-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_mmio: support the arg sizes of find_vqs()Xuan Zhuo
Virtio MMIO support the new parameter sizes of find_vqs(). Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-36-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_pci: support the arg sizes of find_vqs()Xuan Zhuo
Virtio PCI supports new parameter sizes of find_vqs(). Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-35-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio: find_vqs() add arg sizesXuan Zhuo
find_vqs() adds a new parameter sizes to specify the size of each vq vring. NULL as sizes means that all queues in find_vqs() use the maximum size. A value in the array is 0, which means that the corresponding queue uses the maximum size. In the split scenario, the meaning of size is the largest size, because it may be limited by memory, the virtio core will try a smaller size. And the size is power of 2. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_pci: support VIRTIO_F_RING_RESETXuan Zhuo
This patch implements virtio pci support for QUEUE RESET. Performing reset on a queue is divided into these steps: 1. notify the device to reset the queue 2. recycle the buffer submitted 3. reset the vring (may re-alloc) 4. mmap vring to device, and enable the queue This patch implements virtio_reset_vq(), virtio_enable_resetq() in the pci scenario. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-33-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 14:13:22 +0000