summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-27Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes one fix for PX laptops. * 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails
2014-11-26drm/radeon: report disconnected for LVDS/eDP with PX if ddc failsAlex Deucher
If ddc fails, presumably the i2c mux (and hopefully the signal mux) are switched to the other GPU so don't fetch the edid from the vbios so that the connector reports disconnected. bug: https://bugzilla.opensuse.org/show_bug.cgi?id=904417 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-11-27powerpc: 32 bit getcpu VDSO function uses 64 bit instructionsAnton Blanchard
I used some 64 bit instructions when adding the 32 bit getcpu VDSO function. Fix it. Fixes: 18ad51dd342a ("powerpc: Add VDSO version of getcpu") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATEGavin Shan
The flag passed to ioda_eeh_phb_reset() should be EEH_RESET_DEACTIVATE, which is translated to OPAL_DEASSERT_RESET or something else by the EEH backend accordingly. The patch replaces OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE for ioda_eeh_phb_reset(). Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/eeh: Fix PE state formatGavin Shan
Obviously I had wrong format given to the PE state output from /sys/bus/pci/devices/xxxx/eeh_pe_state with some typoes, which was introduced by commit 2013add4ce73. The patch fixes it up. Fixes: 2013add4ce73 ("powerpc/eeh: Show hex prefix for PE state sysfs") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/pseries: Fix endiannes issue in RTAS call from xmonLaurent Dufour
On pseries system (LPAR) xmon failed to enter when running in LE mode, system is hunging. Inititating xmon will lead to such an output on the console: SysRq : Entering xmon cpu 0x15: Vector: 0 at [c0000003f39ffb10] pc: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 lr: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 sp: c0000003f39ffc70 msr: 8000000000009033 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash Bad kernel stack pointer fafb4b0 at eca7cc4 cpu 0x15: Vector: 300 (Data Access) at [c000000007f07d40] pc: 000000000eca7cc4 lr: 000000000eca7c44 sp: fafb4b0 msr: 8000000000001000 dar: 10000000 dsisr: 42000000 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash cpu 0x15: Exception 300 (Data Access) in xmon, returning to main loop xmon: WARNING: bad recursive fault on cpu 0x15 The root cause is that xmon is calling RTAS to turn off the surveillance when entering xmon, and RTAS is requiring big endian parameters. This patch is byte swapping the RTAS arguments when running in LE mode. Cc: stable@vger.kernel.org Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-27powerpc/powernv: Fix the hmi event version check.Mahesh Salgaonkar
The current HMI event structure is an ABI and carries a version field to accommodate future changes without affecting/rearranging current structure members that are valid for previous versions. The current version check "if (hmi_evt->version != OpalHMIEvt_V1)" doesn't accomodate the fact that the version number may change in future. If firmware starts returning an HMI event with version > 1, this check will fail and no HMI information will be printed on older kernels. This patch fixes this issue. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> [mpe: Reword changelog] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-26staging: r8188eu: Fix scheduling while atomic error introduced in commit ↵Larry Finger
fadbe0cd In commit fadbe0cd5292851608e2e01b91d9295fa287b9fe entitled "staging: rtl8188eu:Remove rtw_zmalloc(), wrapper for kzalloc()", the author failed to note that the original code in the wrapper tested whether the caller could sleep, and set the flags argument to kzalloc() appropriately. After the patch, GFP_KERNEL is used unconditionally. Unfortunately, several of the routines may be entered from an interrupt routine and generate a BUG splat for every such call. Routine rtw_sitesurvey_cmd() is used in the example below: BUG: sleeping function called from invalid context at mm/slub.c:1240 in_atomic(): 1, irqs_disabled(): 0, pid: 756, name: wpa_supplicant INFO: lockdep is turned off. CPU: 2 PID: 756 Comm: wpa_supplicant Tainted: G WC O 3.18.0-rc4+ #34 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 ffffc90005557000 ffff880216fafaa8 ffffffff816b0bbf 0000000000000000 ffff8800c3b58000 ffff880216fafac8 ffffffff8107af77 0000000000000001 0000000000000010 ffff880216fafb18 ffffffff811b06ce 0000000000000000 Call Trace: [<ffffffff816b0bbf>] dump_stack+0x4e/0x71 [<ffffffff8107af77>] __might_sleep+0xf7/0x120 [<ffffffff811b06ce>] kmem_cache_alloc_trace+0x4e/0x1f0 [<ffffffffa0888226>] ? rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu] [<ffffffffa0888226>] rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu] [<ffffffffa088f00d>] rtw_do_join+0x22d/0x370 [r8188eu] [<ffffffffa088f6e8>] rtw_set_802_11_ssid+0x218/0x3d0 [r8188eu] [<ffffffffa08c3ca5>] rtw_wx_set_essid+0x1e5/0x410 [r8188eu] [<ffffffffa08c3ac0>] ? rtw_wx_get_rate+0x50/0x50 [r8188eu] [<ffffffff816938f1>] ioctl_standard_iw_point+0x151/0x3f0 [<ffffffff81693d52>] ioctl_standard_call+0xb2/0xe0 [<ffffffff81597df7>] ? rtnl_lock+0x17/0x20 [<ffffffff816945a0>] ? iw_handler_get_private+0x70/0x70 [<ffffffff81693ca0>] ? call_commit_handler+0x40/0x40 [<ffffffff81693256>] wireless_process_ioctl+0x176/0x1c0 [<ffffffff81693e79>] wext_handle_ioctl+0x69/0xc0 [<ffffffff8159fe79>] dev_ioctl+0x309/0x5e0 [<ffffffff810be9c7>] ? call_rcu+0x17/0x20 [<ffffffff8156a472>] sock_ioctl+0x142/0x2e0 [<ffffffff811e0c70>] do_vfs_ioctl+0x300/0x520 [<ffffffff81101514>] ? __audit_syscall_entry+0xb4/0x110 [<ffffffff81101514>] ? __audit_syscall_entry+0xb4/0x110 [<ffffffff810102bc>] ? do_audit_syscall_entry+0x6c/0x70 [<ffffffff811e0f11>] SyS_ioctl+0x81/0xa0 [<ffffffff816ba1d2>] system_call_fastpath+0x12/0x17 Additional routines that generate this BUG are rtw_joinbss_cmd(), rtw_dynamic_chk_wk_cmd(), rtw_lps_ctrl_wk_cmd(), rtw_rpt_timer_cfg_cmd(), rtw_ps_cmd(), report_survey_event(), report_join_res(), survey_timer_hdl(), and rtw_check_bcn_info(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: navin patidar <navin.patidar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26Merge tag 'master-2014-11-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-11-26 Please pull this little batch of fixes intended for the 3.18 stream... For the iwlwifi one, Emmanuel says: "Not all the firmware know how to handle the HOT_SPOT_CMD. Make sure that the firmware will know this command before sending it. This avoids a firmware crash." Along with that, Larry sends a pair of rtlwifi fixes to address some discrepancies from moving drivers out of staging. Larry says: "These two patches are needed to fix a regression introduced when driver rtl8821ae was moved from staging to the regular wireless tree." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26sparc: Add NOP dma_cache_sync() implementation.David S. Miller
This can be a NOP because we forward dma_{alloc,free}_noncoherent to dma_{alloc,free}_coherent. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socksWillem de Bruijn
TCP timestamping introduced MSG_ERRQUEUE handling for TCP sockets. If the socket is of family AF_INET6, call ipv6_recv_error instead of ip_recv_error. This change is more complex than a single branch due to the loadable ipv6 module. It reuses a pre-existing indirect function call from ping. The ping code is safe to call, because it is part of the core ipv6 module and always present when AF_INET6 sockets are active. Fixes: 4ed2d765 (net-timestamp: TCP timestamping) Signed-off-by: Willem de Bruijn <willemb@google.com> ---- It may also be worthwhile to add WARN_ON_ONCE(sk->family == AF_INET6) to ip_recv_error. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26Merge branch 'bridge_nl_validation'David S. Miller
Thomas Graf says: ==================== bridge: Fix missing Netlink message validations Adds various missing length checks in the bridging code for Netlink messages and corresponding attributes provided by user space. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26bridge: Sanitize IFLA_EXT_MASK for AF_BRIDGE:RTM_GETLINKThomas Graf
Only search for IFLA_EXT_MASK if the message actually carries a ifinfomsg header and validate minimal length requirements for IFLA_EXT_MASK. Fixes: 6cbdceeb ("bridge: Dump vlan information from a bridge port") Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26bridge: Add missing policy entry for IFLA_BRPORT_FAST_LEAVEThomas Graf
Fixes: c2d3babf ("bridge: implement multicast fast leave") Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: Check for presence of IFLA_AF_SPECThomas Graf
ndo_bridge_setlink() is currently only called on the slave if IFLA_AF_SPEC is set but this is a very fragile assumption and may change in the future. Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: Validate IFLA_BRIDGE_MODE attribute lengthThomas Graf
Payload is currently accessed blindly and may exceed valid message boundaries. Fixes: a77dcb8c8 ("be2net: set and query VEB/VEPA mode of the PF interface") Fixes: 815cccbf1 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26bridge: Validate IFLA_BRIDGE_FLAGS attribute lengthThomas Graf
Payload is currently accessed blindly and may exceed valid message boundaries. Fixes: 407af3299 ("bridge: Add netlink interface to configure vlans on bridge ports") Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Last minute KVM/ARM fixes; even the generic change actually affects nothing but ARM" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn() arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn() arm/arm64: KVM: vgic: Fix error code in kvm_vgic_create() arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WI arm64: KVM: fix unmapping with 48-bit VAs
2014-11-26Merge tag 'iio-fixes-for-3.18c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Third set of IIO fixes for the 3.18 cycle. Most of these are fairly standard little fixes, a bmc150 and bmg160 patch is to make an ABI change to indicated a specific axis in an event rather than the generic option in the original drivers. As both of these drivers are new in this cycle it would be ideal to push this minor change through even though it isn't strictly a fix. A couple of other 'fixes' change defaults for some settings on these new drivers to more intuitive calues. Looks like some useful feedback has been coming in for this driver since it was applied. * IIO_EVENT_CODE_EXTRACT_DIR bit mask was wrong and has been for a while 0xCF clearly doesn't give a contiguous bitmask. * kxcjk-1013 range setting was failing to mask out the previous value in the register and hence was 'enable only'. * men_z188 device id table wasn't null terminated. * bmg160 and bmc150 both failed to correctly handling an error in mode setting. * bmg160 and bmc150 both had a bug in setting the event direction in the event spec (leads to an attribute name being incorrect) * bmg160 defaulted to an open drain output for the interrupt - as a default this obviously only works with some interrupt chips - hence change the default to push-pull (note this is a new driver so we aren't going to cause any regressions with this change). * bmc150 had an unintuitive default for the rate of change (motion detector) so change it to 0 (new driver so change of default won't cause any regressions).
2014-11-26Merge remote-tracking branches 'spi/fix/dw' and 'spi/fix/sirf' into spi-linusMark Brown
2014-11-26Merge remote-tracking branch 'spi/fix/dma' into spi-linusMark Brown
2014-11-26stmmac: platform: fix default values of the filter bins settingHuacai Chen
The commit 3b57de958e2a brought the support for a different amount of the filter bins, but didn't update the platform driver that without CONFIG_OF. Fixes: 3b57de958e2a (net: stmmac: Support devicetree configs for mcast and ucast filter entries) Signed-off-by: Huacai Chen <chenhc@lemote.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net/mlx4_core: Limit count field to 24 bits in qp_alloc_resJack Morgenstein
Some VF drivers use the upper byte of "param1" (the qp count field) in mlx4_qp_reserve_range() to pass flags which are used to optimize the range allocation. Under the current code, if any of these flags are set, the 32-bit count field yields a count greater than 2^24, which is out of range, and this VF fails. As these flags represent a "best-effort" allocation hint anyway, they may safely be ignored. Therefore, the PF driver may simply mask out the bits. Fixes: c82e9aa0a8 "mlx4_core: resource tracking for HCA resources used by guests" Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26Merge branch 'bcm_sf2'David S. Miller
Florian Fainelli says: ==================== net: dsa: bcm_sf2: misc bugfixes This patch series contains two bug fixes: - first patch fixes an issue on the error path of the driver where we could have left some of our registers mapped - second patch enforces the use of a software reset of the switch to guarantee the HW is in a consistent state prior to software initialization ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: dsa: bcm_sf2: reset switch prior to initializationFlorian Fainelli
Our boot agent may have left the switch in an certain configuration state, make sure we issue a software reset prior to configuring the switch in order to ensure the HW is in a consistent state, in particular transmit queues and internal buffers. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26net: dsa: bcm_sf2: fix unmapping registers in case of errorsFlorian Fainelli
In case we fail to ioremap() one of our registers, we would be leaking existing mappings, unwind those accordingly on errors. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()Ard Biesheuvel
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn. The problem being addressed by the patch above was that some ARM code based the memory mapping attributes of a pfn on the return value of kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should be mapped as device memory. However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin, and the existing non-ARM users were already using it in a way which suggests that its name should probably have been 'kvm_is_reserved_pfn' from the beginning, e.g., whether or not to call get_page/put_page on it etc. This means that returning false for the zero page is a mistake and the patch above should be reverted. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn()Ard Biesheuvel
Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm/arm64: KVM: vgic: Fix error code in kvm_vgic_create()Christoffer Dall
If we detect another vCPU is running we just exit and return 0 as if we succesfully created the VGIC, but the VGIC wouldn't actual be created. This shouldn't break in-kernel behavior because the kernel will not observe the failed the attempt to create the VGIC, but userspace could be rightfully confused. Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WIChristoffer Dall
When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: fix unmapping with 48-bit VAsMark Rutland
Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlapIan Campbell
memblock_is_region_reserved() returns true in the case of a partial overlap, meaning that the current code fails to reserve the non-overlapping portion. This call was introduced as part of d1552ce449eb "of/fdt: move memreserve and dtb memory reservations into core" which went into v3.16. I observed this causing a Midway system with a buggy fdt (the header declares itself to be larger than it really is) failing to boot because the over-inflated size of the fdt was causing it to seem to run into the swapper_pg_dir region, meaning the DT wasn't reserved. The symptoms were failing to find an disks or network and failing to boot. However given the ambiguity of whether things like the initrd are covered by /memreserve/ and similar I think it is best to also register the region rather than just ignoring it. Since memblock_reserve() handles overlaps just fine lets just warn and carry on. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: stable@vger.kernel.org # v3.16+
2014-11-26drm/i915: Cancel vdd off work before suspendVille Syrjälä
Currently we just make sure vdd is off before suspending, but we don't cancel the vdd off work. The work wil not touch vdd if want_panel_vdd==false so in theory this is fine. In the past that was perfectly fine since the vdd off work didn't do anything when want_panel_vdd==false, so even if the work would have been run during system resume before i915 has resumed, nothing would happen. However since pps_lock() will now grab the power domain references before it can check want_panel_vdd, we may end up toggling the power wells on/off already before the driver has resumed. That is not really acceptable, so cancel the vdd off work when suspending the encoder. The problem appeared when pps_lock() was introduced in: commit 773538e86081d146e0020435d614f4b96996c1f9 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu Sep 4 14:54:56 2014 +0300 drm/i915: Reset power sequencer pipe tracking when disp2d is off Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-11-26ufs: fix NULL dereference when no regulators are definedAkinobu Mita
If no voltage supply regulators are defined for the UFS devices (assumed they are always-on), ufshcd_config_vreg_load() can be called on suspend/resume paths with vreg == NULL as hba->vreg_info.vcc* equal to NULL, and it causes NULL pointer dereference. This fixes it by making ufshcd_config_vreg_{h,l}pm noop when no regulators are defined. Signed-off-by: Akinobu Mita <mita@fixstars.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-26ufs: ensure clk gating work is finished before module unloadingAkinobu Mita
When dynamic clk gating feature is enabled, delayed workqueue machanism is used in order to detect certain period of inactivity. But there is no guarantee that scheduled gating work is completed before module unloading. So it can cause kernel crash by accessing memory after it was freed. Fix it by cancelling clk gating and ungating works and ensure that its execution is finished before module unloading. Signed-off-by: Akinobu Mita <mita@fixstars.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-26irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_mapDmitry Torokhov
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Kevin Cernekee <cernekee@gmail.com> Link: https://lkml.kernel.org/r/20141114221642.GA37468@dtor-ws Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_mapDmitry Torokhov
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Kevin Cernekee <cernekee@gmail.com> Link: https://lkml.kernel.org/r/20141114221614.GA37395@dtor-ws Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-25Merge branch 'for-3.18' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfixes from Bruce Fields: "These fix one mishandling of the case when security labels are configured out, and two races in the 4.1 backchannel code" * 'for-3.18' of git://linux-nfs.org/~bfields/linux: nfsd: Fix slot wake up race in the nfsv4.1 callback code SUNRPC: Fix locking around callback channel reply receive nfsd: correctly define v4.2 support attributes
2014-11-25Merge git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds
Pull aio fix from Ben LaHaise: "Dirty page accounting fix for aio" * git://git.kvack.org/~bcrl/aio-fixes: aio: fix uncorrent dirty pages accouting when truncating AIO ring buffer
2014-11-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "This series fix a nasty issue with radeon adapters on powerpc servers, it's all CC'ed stable and has the relevant maintainers ack's/reviews. Basically, some (radeon) adapters have issues with MSI addresses above 1T (only support 40-bits). We had powerpc specific quirk but it only listed a specific revision of an adapter that we shipped with our machines and didn't properly handle the audio function which some distros enable nowadays. So we made the quirk generic and fixed both the graphic and audio drivers properly to use it. Without that, ppc64 server machines will crash at boot with a radeon adapter. Note: This has been brewing for a while, it just needed a last respin which got delayed due to us moving ozlabs to a new location in town and other such things taking priority" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Remove unused force_32bit_msi quirk powerpc/pseries: Honor the generic "no_64bit_msi" flag powerpc/powernv: Honor the generic "no_64bit_msi" flag sound/radeon: Move 64-bit MSI quirk from arch to driver gpu/radeon: Set flag to indicate broken 64-bit MSI PCI/MSI: Add device flag indicating that 64-bit MSIs don't work ALSA: hda - Limit 40bit DMA for AMD HDMI controllers
2014-11-25Merge tag 'hwmon-for-linus-v3.18-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon fix from Guenter Roeck: "Fix hwmon registration problem in g762 driver" * tag 'hwmon-for-linus-v3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (g762) fix call to devm_hwmon_device_register_with_groups()
2014-11-25Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
https://git.linaro.org/people/mike.turquette/linux Pull clock fixes from Mike Turquette: "The fixes for the clock framework are all regressions in drivers, plus a single fix in one of the basic clock templates. No fixes to the core this time around. As with most clock driver fixes these run the gamut from fixing a build warning to fixing wrecked memory timings, with a little USB tossed in for fun" * tag 'clk-fixes-for-linus' of https://git.linaro.org/people/mike.turquette/linux: clk: pxa: fix pxa27x CCCR bit usage clk-divider: Fix READ_ONLY when divider > 1 clk: qcom: Fix duplicate rbcpr clock name clk: at91: usb: fix at91sam9x5 recalc, round and set rate clk: at91: usb: fix at91rm9200 round and set rate
2014-11-25ASoC: Remove 'const' from the device_node pointersJean-Francois Moine
As Russell King's explained it, there should not be pointers to struct device_node: "struct device_node is a ref-counted structure. That means if you store a reference to it, you should "get" it, and you should "put" it once you've done. The act of "put"ing the pointed-to structure involves writing to that structure, so it is totally unappropriate to store a device_node structure as a const pointer. It forces you to have to cast it back to a non-const pointer at various points in time to use various OF function calls." [This isn't quite the application here, we're not geting or putting the pointer though we did add some other users who call non-const OF functions -- broonie] Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25Revert "serial: of-serial: add PM suspend/resume support"Greg Kroah-Hartman
This reverts commit 2dea53bf57783f243c892e99c10c6921e956aa7e. Turns out to be broken :( Cc: Jingchang Lu <jingchang.lu@freescale.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25tg3: fix ring init when there are more TX than RX channelsThadeu Lima de Souza Cascardo
If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25tcp: fix possible NULL dereference in tcp_vX_send_reset()Eric Dumazet
After commit ca777eff51f7 ("tcp: remove dst refcount false sharing for prequeue mode") we have to relax check against skb dst in tcp_v[46]_send_reset() if prequeue dropped the dst. If a socket is provided, a full lookup was done to find this socket, so the dst test can be skipped. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88191 Reported-by: Jaša Bartelj <jasa.bartelj@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Daniel Borkmann <dborkman@redhat.com> Fixes: ca777eff51f7 ("tcp: remove dst refcount false sharing for prequeue mode") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25rtlwifi: Change order in device startupLarry Finger
The existing order of steps when starting the PCI devices works for 2.4G devices, but fails to initialize the 5G section of the RTL8821AE hardware. This patch is needed to fix the regression reported in Bug #88811 (https://bugzilla.kernel.org/show_bug.cgi?id=88811). Reported-by: Valerio Passini <valerio.passini@unicam.it> Tested-by: Valerio Passini <valerio.passini@unicam.it> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Valerio Passini <valerio.passini@unicam.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-25rtlwifi: rtl8821ae: Fix 5G detection problemLarry Finger
The changes associated with moving this driver from staging to the regular tree missed one section setting the allowable rates for the 5GHz band. This patch is needed to fix the regression reported in Bug #88811 (https://bugzilla.kernel.org/show_bug.cgi?id=88811). Reported-by: Valerio Passini <valerio.passini@unicam.it> Tested-by: Valerio Passini <valerio.passini@unicam.it> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Valerio Passini <valerio.passini@unicam.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-25Revert "netfilter: conntrack: fix race in __nf_conntrack_confirm against ↵Pablo Neira
get_next_corpse" This reverts commit 5195c14c8b27cc0b18220ddbf0e5ad3328a04187. If the conntrack clashes with an existing one, it is left out of the unconfirmed list, thus, crashing when dropping the packet and releasing the conntrack since golden rule is that conntracks are always placed in any of the existing lists for traceability reasons. Reported-by: Daniel Borkmann <dborkman@redhat.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=88841 Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25Merge branch 'ipv6_vxlan_outer_udp_csum'David S. Miller
Alexander Duyck says: ==================== Fix outer UDP checksums for IPv6 VXLAN tunnels In testing against an older kernel I found a couple issues in the IPv6 VXLAN tunnel checksum logic for the outer UDP checksum. First the default transitioned from using an outer checksum to not using one. Second, sometime after that the checksum inputs were changed resulting the checksum not being correct if it were computed. These two issues prevented a ping from the newer kernel to the older one. With these two changes applied I verified I was able to send traffic over the VXLAN tunnel to a link partner on an older kernel. The boolean flip fix can be submitted for 3.17 stable as well since the patch that introduced the issue was included in that kernel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 19:09:13 +0000