summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-03tcp: tcp_set_window_clamp() cleanupEric Dumazet
Remove one indentation level. Use max_t() and clamp() macros. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: remove READ_ONCE(req->ts_recent)Eric Dumazet
After commit 8d52da23b6c6 ("tcp: Defer ts_recent changes until req is owned"), req->ts_recent is not changed anymore. It is set once in tcp_openreq_init(), bpf_sk_assign_tcp_reqsk() or cookie_tcp_reqsk_alloc() before the req can be seen by other cpus/threads. This completes the revert of eba20811f326 ("tcp: annotate data-races around tcp_rsk(req)->ts_recent"). Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wang Hai <wanghai38@huawei.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03net: gro: convert four dev_net() callsEric Dumazet
tcp4_check_fraglist_gro(), tcp6_check_fraglist_gro(), udp4_gro_lookup_skb() and udp6_gro_lookup_skb() assume RCU is held so that the net structure does not disappear. Use dev_net_rcu() instead of dev_net() to get LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: convert to dev_net_rcu()Eric Dumazet
TCP uses of dev_net() are under RCU protection, change them to dev_net_rcu() to get LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: add four drop reasons to tcp_check_req()Eric Dumazet
Use two existing drop reasons in tcp_check_req(): - TCP_RFC7323_PAWS - TCP_OVERWINDOW Add two new ones: - TCP_RFC7323_TSECR (corresponds to LINUX_MIB_TSECRREJECTED) - TCP_LISTEN_OVERFLOW (when a listener accept queue is full) Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: add a drop_reason pointer to tcp_check_req()Eric Dumazet
We want to add new drop reasons for packets dropped in 3WHS in the following patches. tcp_rcv_state_process() has to set reason to TCP_FASTOPEN, because tcp_check_req() will conditionally overwrite the drop_reason. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03Merge branch 'ipv4-fib-convert-rtm_newroute-and-rtm_delroute-to-per-netns-rtnl'Jakub Kicinski
Kuniyuki Iwashima says: ==================== ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL. Patch 1 is misc cleanup. Patch 2 ~ 8 converts two fib_info hash tables to per-netns. Patch 9 ~ 12 converts rtnl_lock() to rtnl_net_lcok(). v2: https://lore.kernel.org/20250226192556.21633-1-kuniyu@amazon.com v1: https://lore.kernel.org/20250225182250.74650-1-kuniyu@amazon.com ==================== Link: https://patch.msgid.link/20250228042328.96624-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.Kuniyuki Iwashima
We converted fib_info hash tables to per-netns one and now ready to convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL. Let's hold rtnl_net_lock() in inet_rtm_newroute() and inet_rtm_delroute(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-13-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Move fib_valid_key_len() to rtm_to_fib_config().Kuniyuki Iwashima
fib_valid_key_len() is called in the beginning of fib_table_insert() or fib_table_delete() to check if the prefix length is valid. fib_table_insert() and fib_table_delete() are called from 3 paths - ip_rt_ioctl() - inet_rtm_newroute() / inet_rtm_delroute() - fib_magic() In the first ioctl() path, rtentry_to_fib_config() checks the prefix length with bad_mask(). Also, fib_magic() always passes the correct prefix: 32 or ifa->ifa_prefixlen, which is already validated. Let's move fib_valid_key_len() to the rtnetlink path, rtm_to_fib_config(). While at it, 2 direct returns in rtm_to_fib_config() are changed to goto to match other places in the same function Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-12-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Hold rtnl_net_lock() in ip_rt_ioctl().Kuniyuki Iwashima
ioctl(SIOCADDRT/SIOCDELRT) calls ip_rt_ioctl() to add/remove a route in the netns of the specified socket. Let's hold rtnl_net_lock() there. Note that rtentry_to_fib_config() can be called without rtnl_net_lock() if we convert rtentry.dev handling to RCU later. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-11-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Hold rtnl_net_lock() for ip_fib_net_exit().Kuniyuki Iwashima
ip_fib_net_exit() requires RTNL and is called from fib_net_init() and fib_net_exit_batch(). Let's hold rtnl_net_lock() before ip_fib_net_exit(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-10-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Namespacify fib_info hash tables.Kuniyuki Iwashima
We will convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL. Then, we need to have per-netns hash tables for struct fib_info. Let's allocate the hash tables per netns. fib_info_hash, fib_info_hash_bits, and fib_info_cnt are now moved to struct netns_ipv4 and accessed with net->ipv4.fib_XXX. Also, the netns checks are removed from fib_find_info_nh() and fib_find_info(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-9-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Add fib_info_hash_grow().Kuniyuki Iwashima
When the number of struct fib_info exceeds the hash table size in fib_create_info(), we try to allocate a new hash table with the doubled size. The allocation is done in fib_create_info(), and if successful, each struct fib_info is moved to the new hash table by fib_info_hash_move(). Let's integrate the allocation and fib_info_hash_move() as fib_info_hash_grow() to make the following change cleaner. While at it, fib_info_hash_grow() is placed near other hash-table-specific functions. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-8-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Remove fib_info_hash_size.Kuniyuki Iwashima
We will allocate the fib_info hash tables per netns. There are 5 global variables for fib_info hash tables: fib_info_hash, fib_info_laddrhash, fib_info_hash_size, fib_info_hash_bits, fib_info_cnt. However, fib_info_laddrhash and fib_info_hash_size can be easily calculated from fib_info_hash and fib_info_hash_bits. Let's remove fib_info_hash_size and use (1 << fib_info_hash_bits) instead. Now we need not pass the new hash table size to fib_info_hash_move(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-7-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Remove fib_info_laddrhash pointer.Kuniyuki Iwashima
We will allocate the fib_info hash tables per netns. There are 5 global variables for fib_info hash tables: fib_info_hash, fib_info_laddrhash, fib_info_hash_size, fib_info_hash_bits, fib_info_cnt. However, fib_info_laddrhash and fib_info_hash_size can be easily calculated from fib_info_hash and fib_info_hash_bits. Let's remove the fib_info_laddrhash pointer and instead use fib_info_hash + (1 << fib_info_hash_bits). While at it, fib_info_laddrhash_bucket() is moved near other hash-table-specific functions. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-6-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Make fib_info_hashfn() return struct hlist_head.Kuniyuki Iwashima
Every time fib_info_hashfn() returns a hash value, we fetch &fib_info_hash[hash]. Let's return the hlist_head pointer from fib_info_hashfn() and rename it to fib_info_hash_bucket() to match a similar function, fib_info_laddrhash_bucket(). Note that we need to move the fib_info_hash assignment earlier in fib_info_hash_move() to use fib_info_hash_bucket() in the for loop. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-5-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Allocate fib_info_hash[] during netns initialisation.Kuniyuki Iwashima
We will allocate fib_info_hash[] and fib_info_laddrhash[] for each netns. Currently, fib_info_hash[] is allocated when the first route is added. Let's move the first allocation to a new __net_init function. Note that we must call fib4_semantics_exit() in fib_net_exit_batch() because ->exit() is called earlier than ->exit_batch(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-4-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Allocate fib_info_hash[] and fib_info_laddrhash[] by kvcalloc().Kuniyuki Iwashima
Both fib_info_hash[] and fib_info_laddrhash[] are hash tables for struct fib_info and are allocated by kvzmalloc() separately. Let's replace the two kvzmalloc() calls with kvcalloc() to remove the fib_info_laddrhash pointer later. Note that fib_info_hash_alloc() allocates a new hash table based on fib_info_hash_bits because we will remove fib_info_hash_size later. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Use cached net in fib_inetaddr_event().Kuniyuki Iwashima
net is available in fib_inetaddr_event(), let's use it. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03selftests: net: report output format as TAP 13 in Python testsJakub Kicinski
The Python lib based tests report that they are producing "KTAP version 1", but really we aren't making use of any KTAP features, like subtests. Our output is plain TAP. Report TAP 13 instead of KTAP 1, this is what mptcp tests do, and what NIPA knows how to parse best. For HW testing we need precise subtest result tracking. Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250228180007.83325-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28Merge branch 'add-usb-net-support-for-telit-cinterion-fn990b'Jakub Kicinski
Fabio Porcedda says: ==================== Add usb net support for Telit Cinterion FN990B Add usb net support for Telit Cinterion FE990B. Also fix Telit Cinterion FE990A name. Connection with ModemManager was tested also AT ports. There is a different patch set for the usb option part. 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms ==================== Link: https://patch.msgid.link/20250227112441.3653819-1-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: usb: cdc_mbim: fix Telit Cinterion FE990A nameFabio Porcedda
The correct name for FE990 is FE990A so use it in order to avoid confusion with FE990B. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-4-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: usb: qmi_wwan: fix Telit Cinterion FE990A nameFabio Porcedda
The correct name for FE990 is FE990A so use it in order to avoid confusion with FE990B. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-3-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: usb: qmi_wwan: add Telit Cinterion FE990B compositionFabio Porcedda
Add the following Telit Cinterion FE990B composition: 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-2-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28Merge branch 'inet-ping-remove-extra-skb_clone-consume_skb'Jakub Kicinski
Eric Dumazet says: ==================== inet: ping: remove extra skb_clone()/consume_skb() First patch in the series moves ICMP_EXT_ECHOREPLY handling in icmp_rcv() to prepare the second patch. The second patch removes one skb_clone()/consume_skb() pair when processing ICMP_EXT_REPLY packets. Some people use hundreds of "ping -fq ..." to stress hosts :) ==================== Link: https://patch.msgid.link/20250226183437.1457318-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28inet: ping: avoid skb_clone() dance in ping_rcv()Eric Dumazet
ping_rcv() callers currently call skb_free() or consume_skb(), forcing ping_rcv() to clone the skb. After this patch ping_rcv() is now 'consuming' the original skb, either moving to a socket receive queue, or dropping it. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250226183437.1457318-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28ipv4: icmp: do not process ICMP_EXT_ECHOREPLY for broadcast/multicast addressesEric Dumazet
There is no point processing ICMP_EXT_ECHOREPLY for routes which would drop ICMP_ECHOREPLY (RFC 1122 3.2.2.6, 3.2.2.8) This seems an oversight of the initial implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250226183437.1457318-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28Merge branch 'net-stmmac-cleanup-transmit-clock-setting'Jakub Kicinski
Russell King says: ==================== net: stmmac: cleanup transmit clock setting A lot of stmmac platform code which sets the transmit clock is very similar - they decode the speed to the clock rate (125, 25 or 2.5 MHz) and then set a clock to that rate. The DWMAC core appears to have a clock input for the transmit section called clk_tx_i which requires this rate. This series moves the code which sets this clock into the core stmmac code. Patch 1 adds a hook that platforms can use to configure the clock rate. Patch 2 adds a generic implementation. The remainder of the patches convert the glue code for various platforms to use this new infrastructure. ==================== Link: https://patch.msgid.link/Z8AtX-wyPal1auVO@shell.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: thead: switch to use set_clk_tx_rate() hookRussell King (Oracle)
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to manage the transmit clock. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna14-0052tT-S4@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: meson: switch to use set_clk_tx_rate() hookRussell King (Oracle)
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to manage the transmit clock. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0z-0052tN-O1@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: ipq806x: switch to use set_clk_tx_rate() hookRussell King (Oracle)
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to manage the transmit clock. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0u-0052tH-KQ@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: rk: switch to use set_clk_tx_rate() hookRussell King (Oracle)
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to manage the transmit clock. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0p-0052t8-Gn@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: imx: use generic stmmac_set_clk_tx_rate()Russell King (Oracle)
Convert non-i.MX93 users to use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit clock rate. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0k-0052t2-Cc@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: intel: use generic stmmac_set_clk_tx_rate()Russell King (Oracle)
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit clock. Note that given the current unpatched driver structure, plat_dat->fix_mac_speed will always be populated with kmb_eth_fix_mac_speed(), even when no clock is present. We preserve this behaviour in this patch by always initialising plat_dat->clk_tx_i and plat_dat->set_clk_tx_rate. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0f-0052sw-8r@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: s32: use generic stmmac_set_clk_tx_rate()Russell King (Oracle)
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit clock. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0a-0052sq-59@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: starfive: use generic stmmac_set_clk_tx_rate()Russell King (Oracle)
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit clock. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0V-0052sk-1L@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: dwc-qos: use generic stmmac_set_clk_tx_rate()Russell King (Oracle)
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit clock. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0P-0052se-Tv@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: provide generic implementation for set_clk_tx_rate methodRussell King (Oracle)
Provide a generic implementation for the set_clk_tx_rate method introduced by the previous patch, which is capable of configuring the MAC transmit clock for 10M, 100M and 1000M speeds for at least MII, GMII, RGMII and RMII interface modes. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0K-0052sY-QF@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: stmmac: provide set_clk_tx_rate() hookRussell King (Oracle)
Several stmmac sub-drivers which support RGMII follow the same pattern. They calculate the transmit clock rate, and then call clk_set_rate(). Analysis of several implementation documents suggests that the platform is responsible for providing the transmit clock to the DWMAC core's clk_tx_i. The expected rates are: 10Mbps 100Mbps 1Gbps MII 2.5MHz 25MHz RMII 2.5MHz 25MHz GMII 125MHz RGMI 2.5MHz 25MHz 125MHz It seems some platforms require this clock to be manually configured, but there are outputs from the MAC core that indicate the speed, so a platform may use these to automatically configure the clock. Thus, we can't just provide one solution to configure this clock rate. Moreover, the clock may need to be derived from one of several sources depending on the interface mode. Provide a platform hook that is passed the transmit clock, interface mode and speed. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tna0F-0052sS-Lr@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28wifi: mac80211: refactor populating mesh related fields in sinfoSarika Sharma
Introduce the sta_set_mesh_sinfo() to populate mesh related fields in sinfo structure for station statistics. This will allow for the simplified population of other fields in the sinfo structure for link level in a subsequent patch to add support for MLO station statistics. No functionality changes added. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250213171632.1646538-3-quic_sarishar@quicinc.com [reword since it's just an internal thing] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-28wifi: cfg80211: reorg sinfo structure elements for meshSarika Sharma
Currently, as multi-link operation(MLO) is not supported for mesh, reorganize the sinfo structure for mesh-specific fields and embed mesh related NL attributes together in organized view. This will allow for the simplified reorganization of sinfo structure for link level in a subsequent patch to add support for MLO station statistics. No functionality changes added. Pahole summary before the reorg of sinfo structure: - size: 256, cachelines: 4, members: 50 - sum members: 239, holes: 4, sum holes: 17 - paddings: 2, sum paddings: 2 - forced alignments: 1, forced holes: 1, sum forced holes: 1 Pahole summary after the reorg of sinfo structure: - size: 248, cachelines: 4, members: 50 - sum members: 239, holes: 4, sum holes: 9 - paddings: 2, sum paddings: 2 - forced alignments: 1, last cacheline: 56 bytes Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250213171632.1646538-2-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-28wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"Colin Ian King
There is a spelling mistake in a IWL_DEBUG_RATE message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://patch.msgid.link/20250227221917.658401-1-colin.i.king@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-28Merge branch 'mlx5-health-syndrome'David S. Miller
Tariq Toukan says: ==================== mlx5: Trust lockdown health syndrome This series introduces a new error type in the health syndrome, specifically for trust lock-down. Additionally, it exposes the CRR bit in the health buffer, which, when set, indicates that the error cannot be recovered without a process involving a cold reset. We add The CRR bit value to the health buffer info log and update it to be logged on any syndrome. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-02-28net/mlx5: Add trust lockdown error to health syndrome print functionShahar Shitrit
Add the new health syndrome value to hsynd_str() function to indicate that the device got a trust lockdown fault. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-02-28net/mlx5: Expose crr in health bufferShahar Shitrit
Expose crr bit in struct health buffer. When set, it indicates that the error cannot be recovered without flow involving a cold reset. Add its value to the health buffer info log. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-02-28net/mlx5: Log health buffer data on any syndromeMoshe Shemesh
Currently health buffer data is logged either when FW fatal error detected or miss counter reached max misses threshold. Log health buffer whenever new health syndrome is detected. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-02-28net/mlx5: Avoid report two health errors on same syndromeMoshe Shemesh
In case health counter has not increased for few polling intervals, miss counter will reach max misses threshold and health report will be triggered for FW health reporter. In case syndrome found on same health poll another health report will be triggered. Avoid two health reports on same syndrome by marking this syndrome as already known. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-02-27Merge branch 'selftests-net-deflake-gro-tests-and-fix-return-value-and-output'Jakub Kicinski
Kevin Krakauer says: ==================== selftests/net: deflake GRO tests and fix return value and output The GRO selftests can flake and have some confusing behavior. These changes make the output and return value of GRO behave as expected, then deflake the tests. v1: https://lore.kernel.org/20250218164555.1955400-1-krakauer@google.com ==================== Link: https://patch.msgid.link/20250226192725.621969-1-krakauer@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27selftests/net: deflake GRO testsKevin Krakauer
GRO tests are timing dependent and can easily flake. This is partially mitigated in gro.sh by giving each subtest 3 chances to pass. However, this still flakes on some machines. Reduce the flakiness by: - Bumping retries to 6. - Setting napi_defer_hard_irqs to 1 to reduce the chance that GRO is flushed prematurely. This also lets us reduce the gro_flush_timeout from 1ms to 100us. Tested: Ran `gro.sh -t large` 1000 times. There were no failures with this change. Ran inside strace to increase flakiness. Signed-off-by: Kevin Krakauer <krakauer@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250226192725.621969-4-krakauer@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27selftests/net: only print passing message in GRO tests when tests passKevin Krakauer
gro.c:main no longer erroneously claims a test passes when running as a sender. Tested: Ran `gro.sh -t large` to verify the sender no longer prints a status. Signed-off-by: Kevin Krakauer <krakauer@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250226192725.621969-3-krakauer@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 00:57:09 +0000