summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-01arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314Martin Schmiedel
This adds support for TQMa8MPQL module on MBa8MP-RAS314 board. Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27arm64: dts: imx8dxl-ss-conn: add gpmi nandFrank Li
Update gpmi nand and dma_apbh interrupt number for imx8dxl. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27arm64: dts: imx8-ss-conn: add gpmi nand nodeFrank Li
Add gpmi nand support. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: Support i.MX93 9x9 Quick Start BoardPeng Fan
Add the board device tree with sdhc1/2, cm33, mu, lpuart1, lpi2c1/2, usb enabled and etc, which to support the i.MX 93 quick start evaluation kit that provides a low-cost platform to evaluate the i.MX 93 applications processors in a 9x9mm package. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dtsPeng Fan
Add a minimal dts for i.MX95 19x19 EVK board: - lpuart1 as console - sdhc1/2 as storage Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: add i.MX95 basic dtsiPeng Fan
i.MX95 features 6 A55 Cores, ARM Mali GPU, ISP, ML acceleration NPU, and Edgelock secure enclave security. This patch is to add a minimal dtsi, with cpu cores, scmi, gic, uart, mu, sdhc, lpi2c added. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8mm-iot-gateway: Add initial supportFabio Estevam
Add the initial support for the CompuLab i.MX8MM IoT Gateway board, which is based on the Compulab's UCM-iMX8M-Mini SoM. Board URL: https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/ SoM URL: https://www.compulab.com/products/computer-on-modules/ucm-imx8m-mini-nxp-i-mx-8m-mini-som-system-on-module-computer/ Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: layerscape: change thermal node nameFrank Li
Add thermal subfix for thermal node name to fix DTB_CHECK warning: thermal-zones: '...' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: layerscape: Change node name from 'esdhc' to 'mmc'Frank Li
Use common node name 'mmc' to fix DTB_CHECK warning. Add compatible string 'fsl,ls2080a-esdhc' for fsl-lx2160a. arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: esdhc@1560000: $nodename:0: 'esdhc@1560000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: esdhc@1560000: $nodename:0: 'esdhc@1560000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dtb: esdhc@1560000: $nodename:0: 'esdhc@1560000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: esdhc@2140000: $nodename:0: 'esdhc@2140000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: esdhc@2140000: $nodename:0: 'esdhc@2140000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: esdhc@2140000: compatible:0: 'fsl,esdhc' is not one of ['fsl,mpc8536-esdhc', 'fsl,mpc8378-esdhc', 'fsl,p2020-esdhc', 'fsl,p4080-esdhc', 'fsl,t1040-esdhc', 'fsl,t4240-esdhc', 'fsl,ls1012a-esdhc', 'fsl,ls1028a-esdhc', 'fsl,ls1088a-esdhc', 'fsl,ls1043a-esdhc', 'fsl,ls1046a-esdhc', 'fsl,ls2080a-esdhc'] from schema $id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml# arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: esdhc@2140000: $nodename:0: 'esdhc@2140000' does not match '^mmc(@.*)?$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8mp-msc-sm2s: Add HDMI outputLuca Ceresoli
Enable the HDMI output of the MSC SM2-MB-EP1 carrier board based the SM2S-IMX8PLUS SMARC module. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: imx8mp-verdin: add HDMI supportFrancesco Dolcini
Enable HDMI output on Verdin iMX8MP on all the supported carrier boards (dev, dahlia, mallow and yavia). HDMI DDC I2C is used in regular I2C mode, see link on the related dt-bindings patch. Fix CEC and HPD pinctrl, having a pull-down on HPD and a pull-up on CEC. Link: https://lore.kernel.org/all/20240515062753.111746-1-marex@denx.de/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8mp-debix-model-a: Enable HDMI outputChristopher Obbard
Enable the HDMI output on the Debix Model A SBC, using the HDMI encoder present in the i.MX8MP SoC. This has been tested with a generic 1080p HDMI display, along with a smaller 1280x800 HDMI display. Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8: use defines for interruptsKrzysztof Kozlowski
Replace hard-coded interrupt flags with standard defines for readability. No changes in resulting DTBs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: ls208xa: use defines for timer interruptsKrzysztof Kozlowski
Replace hard-coded interrupt parts (GIC, flags) with standard defines for readability. No changes in resulting DTBs. The comment was saying interrupt was active low, but the actual used value was active high, so assume that the code, not the comment, is correct. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: use defines for interruptsKrzysztof Kozlowski
Replace hard-coded interrupt parts (GIC, flags) with standard defines for readability. No changes in resulting DTBs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls1028a-rdb: Add EEPROM nodes to I2C busMike Looijmans
The LS1028ARDB board contains three EEPROM devices, for storing boot code, DDR SPD and board information. Add the missing entries to the devicetree. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: imx8mp-beacon-kit: Fix errors found from CHECK_DTBSAdam Ford
The adv7535 has some unnecessary entries which can be removed since they were not setup properly anyway and the defaults work just fine. Removing them and adding some required regulators make the errors detected from CHECK_DTBS go away: reg-names:1: 'edid' was expected reg-names:2: 'cec' was expected 'avdd-supply' is a required property 'dvdd-supply' is a required property 'pvdd-supply' is a required property 'a2vdd-supply' is a required property 'v3p3-supply' is a required property Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls2160a: Change I2C clock name to ipg to fix DTB_CHECK warningFrank Li
dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c" to fix below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dtb: i2c@2010000: clock-names:0: 'ipg' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls208xa: Change I2C clock name to ipg to fix DTB_CHECK warningFrank Li
dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c" to fix below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dtb: i2c@2000000: clock-names:0: 'ipg' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls1043a: Change I2C clock name to ipg to fix DTB_CHECK warningFrank Li
dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c" to fix below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: i2c@2190000: clock-names:0: 'ipg' was expecte Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls1012a: Reorder sai dma-names to clean up DTB_CHECK warningFrank Li
Change order of sai's dma-names to clearn up below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b50000: dma-names:1: 'tx' was expected arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b60000: dma-names:1: 'tx' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: imx8mp: Add imx8mp-specific irqsteer compatibleAlexander Stein
i.MX8MP irqsteer has power-domain support, so use a dedicated compatible. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: freescale: imx8mp-verdin: don't limit i2c2 max. clockMax Krummenacher
Verdin I2C2 may be used to access other I2C devices apart from serving as an HDMI DDC channel. Thus do not limit the used I2C clock frequency to 10kHz in the module specific device tree part. If an overlay configures i2c2 as DDC the overlay is also responsible to cope with an appropriate I2C clock. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: freescale: imx8mm-verdin: don't limit i2c2 max. clockMax Krummenacher
Verdin I2C2 may be used to access other I2C devices apart from serving as an HDMI DDC channel. Thus do not limit the used I2C clock frequency to 10kHz in the module specific device tree part. If an overlay configures i2c2 as DDC the overlay is also responsible to cope with an appropriate I2C clock. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: phygate-tauri-l: add overlays for RS232 and RS485Parthiban Nallathambi
UART2 and UART4 can used in following combination, 2 x RS232: - UART2 and UART4 without flow control - MUX selection GPIO3_20 must be held low 1 x RS232 + 1 x RS485: - UART2 - RS232 - UART4 - RS485 - MUX selection GPIO3_20 must be held high - RE/DE for RS485 controlled with GPIO3_25 1 x RS232 with flow control: - UART2 - RS232 - MUX selection GPIO3_20 must be held low Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: phygate-tauri-l: enable pcie phyParthiban Nallathambi
I210 intel ethernet controller is connected to PCIe. Enable the PHY to use the ethernet controller. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: freescale: ls1028a: Reorder sai dma-names to fix warningFrank Li
Reorder the SAI dma-names to ensure "rx" precedes "tx" as required to fixes the DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: audio-controller@f100000: dma-names:1: 'tx' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,sai.yaml# arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: audio-controller@f110000: dma-names:1: 'tx' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: freescale: ls1028a: Remove undocumented 'fsl,ls-pcie-ep'Frank Li
Remove the undocumented compatible string 'fsl,ls-pcie-ep' property from the ls1028a device tree source to fix DTB_CHECK warnings. arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: pcie-ep@3400000: compatible: ['fsl,ls1028a-pcie-ep', 'fsl,ls-pcie-ep'] is too long from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mq-librem5: Don't wake up on volume key pressGuido Günther
The only key that should wake up the phone is power button press. This prevents accidental wakeup due to e.g. pressing the buttons in the pocket or backpack and is in line what userspace uses to unblank the device. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Remove unused ocram nodeAlexander Stein
This node is unused and origins from downstream kernel where it is used for the DSP. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2 and PDK3Marek Vasut
Enable HDMI output on i.MX8MP DHCOM PDK2 and PDK3. The I2C5 on PDK2 and I2C mux port 1 on PDK3 respectively are used in regular I2C mode instead of HDMI DDC mode to permit connection of other I2C devices on those buses. The pinctrl_hdmi node is part of the SoM DTSI already. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp-evk: add bt-sco sound card supportShengjiu Wang
Add bt-sco sound card, which is used by BT HFP case. It supports wb profile as default Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystemShengjiu Wang
Initialize audio PLL1 as the parent clock for 8kHz series rates, audio PLL2 as the parent clock for 11kHz series rates. that PLL1 and PLL2 can together support full range of audio sample rates. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8mp-evk: Add MX8-DLVDS-LCD1 display module supportLiu Ying
MX8-DLVDS-LCD1 display module integrates a KOE TX26D202VM0BWA LCD panel and a touch IC. Add an overlay to support the LCD panel on i.MX8MP EVK. Specify 148.5MHz clock frequency in panel-timing node to accommodate 3.5-fold 519.75MHz media_ldb clock which is derived from 1.0395GHz video_pll1 clock. Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm: Add GPU nodesChristian Gmeiner
Add the DT node for the GPU core found on the i.MX8QM. etnaviv-gpu 53100000.gpu: model: GC7000, revision: 6009 [drm] Initialized etnaviv 1.4.0 20151214 for etnaviv on minor 0 Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm-mek: add fec2 supportFrank Li
Add fec2 support. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm: add ocopt and fec_mac[0,1]Frank Li
add ocotp ad fec_mac[0,1] for imx8qm. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm-mek: add lsio mu5 and mu6Frank Li
Add lsio mu5 and mu6. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm-mek: add flexcan supportFrank Li
Add flexcan[1,2,3] support for imx8qm-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm-mek: add cm41_i2c and children devicesFrank Li
Add cm41_i2c and devices under it for imx8qm-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm-mek: add i2c0 and children devicesFrank Li
Add i2c0 and all devices under it for imx8qm-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8x: add cm41 subsystem dtsiFrank Li
Add cm41 subsystem dtsi for iMX8X chips. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm-mek: add sai and wm8960 supportFrank Li
Add sai[0,1,6,7], wm8960 and asrc0 support. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8qm-ss-audio: add audio nodesFrank Li
Add i.MX8QM audio related nodes and update eDMA[0,1]'s information. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>;Frank Li
Different boards have different DDR memory sizes and layouts for reserved memory. This change reduces future dependencies to add 'imx8qm-ss-audio'. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8dxl-evk: add audio nodesFrank Li
Add audio nodes for imx8dxl-evk boards. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8dxl-ss-adma: update audio node power domains and IRQ numberFrank Li
The power domains of i.MX8DXL's acm is difference i.MX8QXP. IRQ number of sai[0..3] and spdif0 are also difference. Update power domains information for i.MX8DXL. Update sai[0..3] and spdif0's IRQ number for i.MX8DXL. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8dxl-ss-adma: delete unused nodeFrank Li
Delete unused node in adma subsystem. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: freescale: tqma8xx: Add partitions subnode to spi-norAlexander Stein
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: freescale: tqma8mq: Add partitions subnode to spi-norAlexander Stein
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 01:22:03 +0000