summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-17of/fdt: Ignore disabled memory nodesAndre Przywara
When we boot a machine using a devicetree, the generic DT code goes through all nodes with a 'device_type = "memory"' property, and collects all memory banks mentioned there. However it does not check for the status property, so any nodes which are explicitly "disabled" will still be added as a memblock. This ends up badly for QEMU, when booting with secure firmware on arm/arm64 machines, because QEMU adds a node describing secure-only memory: =================== secram@e000000 { secure-status = "okay"; status = "disabled"; reg = <0x00 0xe000000 0x00 0x1000000>; device_type = "memory"; }; =================== The kernel will eventually use that memory block (which is located below the main DRAM bank), but accesses to that will be answered with an SError: =================== [ 0.000000] Internal error: synchronous external abort: 96000050 [#1] PREEMPT SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc6-00014-g10c8acb8b679 #524 [ 0.000000] Hardware name: linux,dummy-virt (DT) [ 0.000000] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.000000] pc : new_slab+0x190/0x340 [ 0.000000] lr : new_slab+0x184/0x340 [ 0.000000] sp : ffff80000a4b3d10 .... ================== The actual crash location and call stack will be somewhat random, and depend on the specific allocation of that physical memory range. As the DT spec[1] explicitly mentions standard properties, add a simple check to skip over disabled memory nodes, so that we only use memory that is meant for non-secure code to use. That fixes booting a QEMU arm64 VM with EL3 enabled ("secure=on"), when not using UEFI. In this case the QEMU generated DT will be handed on to the kernel, which will see the secram node. This issue is reproducible when using TF-A together with U-Boot as firmware, then booting with the "booti" command. When using U-Boot as an UEFI provider, the code there [2] explicitly filters for disabled nodes when generating the UEFI memory map, so we are safe. EDK/2 only reads the first bank of the first DT memory node [3] to learn about memory, so we got lucky there. [1] https://github.com/devicetree-org/devicetree-specification/blob/main/source/chapter3-devicenodes.rst#memory-node (after the table) [2] https://source.denx.de/u-boot/u-boot/-/blob/master/lib/fdtdec.c#L1061-1063 [3] https://github.com/tianocore/edk2/blob/master/ArmVirtPkg/PrePi/FdtParser.c Reported-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220517101410.3493781-1-andre.przywara@arm.com
2022-05-17dt-bindings: arm: fix typos in compatibleKen Kurematsu
Fix typo "cortex" Signed-off-by: Ken Kurematsu <k.kurematsu@nskint.co.jp> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/OSBPR01MB32880CB4C49E50DAB7C6B664DBC89@OSBPR01MB3288.jpnprd01.prod.outlook.com
2022-05-17dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360Gene Chen
Add bindings child nodes for the Mediatek MT6360 Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/all/YmqTzlrVL5KaVPuz@robh.at.kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220516062127.99647-1-gene.chen.richtek@gmail.com
2022-05-09Merge branch 'dt/linus' into dt/nextRob Herring
Pick up new meta-schema fixes.
2022-05-09dt-bindings: display: convert Arm Komeda to DT schemaAndre Przywara
The Arm Komeda (aka Mali-D71) is a display controller that scans out a framebuffer and hands a signal to a digital encoder to generate a DVI or HDMI signal. It supports up to two pipelines, each frame can be composed of up to four layers. Convert the existing DT binding to DT schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-12-andre.przywara@arm.com
2022-05-09dt-bindings: display: convert Arm Mali-DP to DT schemaAndre Przywara
The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans out a framebuffer and hands the pixels over to a digital signal encoder. It supports multiple layers, scaling and rotation. Convert the existing DT binding to DT schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-11-andre.przywara@arm.com
2022-05-09dt-bindings: display: convert Arm HDLCD to DT schemaAndre Przywara
The Arm HDLCD is a display controller that scans out a framebuffer and hands a signal to a digital encoder to generate a DVI or HDMI signal. Convert the existing DT binding to DT schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-10-andre.przywara@arm.com
2022-05-09dt-bindings: display: convert PL110/PL111 to DT schemaAndre Przywara
The Arm PL110 and PL111 are IP blocks that provide a display engine with an LCD interface, being able to drive a variety of LC panels. Convert the binding over to DT schema, to the DTs can be automatically checked. This still contains the deprecated "arm,pl11x,tft-r0g0b0-pads" property, because this is used by several DTs in the tree. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [robh: make interrupts optional (not connected on Realview EB)] Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-9-andre.przywara@arm.com
2022-05-09dt-bindings: arm: convert vexpress-config to DT schemaAndre Przywara
The Arm Versatile Express system features a bridge device that provides access to various smaller devices like clocks, reset gates and various sensors. Extract the second half of the informal vexpress-sysreg.txt binding and make it proper DT schema compliant. This makes the old .txt binding redundant, so remove it. This describes both the actual parent configuration bridge, as well as all the possible children devices. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-8-andre.przywara@arm.com
2022-05-09dt-bindings: arm: convert vexpress-sysregs to DT schemaAndre Przywara
The Arm Versatile Express system control register block provides GPIO functionality to some devices and is also used for board identification. Extract the first half of the informal vexpress-sysreg.txt binding and make it proper DT schema compliant. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-7-andre.przywara@arm.com
2022-05-09dt-bindings: serio: add Arm PL050 DT schemaAndre Przywara
The Arm PL050 "Keyboard/Mouse Interface" is an Arm system IP providing a PS/2 compatible serial interface. Add a simple DT schema binding, based on the TRM[1], the existing DTs and the Linux driver. [1] https://developer.arm.com/documentation/ddi0143/latest Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-6-andre.przywara@arm.com
2022-05-09dt-bindings: sound: add Arm PL041 AACI DT schemaAndre Przywara
The Arm PrimeCell Advanced Audio CODEC Interface (AACI aka PL041) is a peripheral that provides communication with an audio CODEC. Add a simple DT schema binding for it, so that DTs can be validated automatically. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-5-andre.przywara@arm.com
2022-05-09dt-bindings: arm: sp810: convert to DT schemaAndre Przywara
The Arm SP810 IP is a "system controller", providing clocks, timer and a watchdog. Convert the DT binding to DT schema, to allow automatic validation. The existing .txt binding described all properties as required, but the assigned-clock* and clock-output-names are actually not (from a hardware perspective). The only existing driver I could find (in Linux) doesn't require them either, so drop those properties from the "required" list. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-4-andre.przywara@arm.com
2022-05-09dt-bindings: arm: spe-pmu: convert to DT schemaAndre Przywara
Convert the Arm Statisical Profiling Extension (SPE) binding to DT schema. Not much to see here, basically just the announcement that SPE is integrated on the system level and where the IRQ is routed to. Move it into the more suitable perf/ directory on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-3-andre.przywara@arm.com
2022-05-09dt-bindings: iommu: arm,smmu-v3: make PRI IRQ optionalAndre Przywara
The Page Request Interface (PRI) is an optional PCIe feature. As such, a SMMU would not need to handle it if the PCIe host bridge or the SMMU itself do not implement it. Also an SMMU could be connected to a platform device, without any PRI functionality whatsoever. In all cases there would be no SMMU PRI queue interrupt to be wired up to an interrupt controller. At the moment, with the "eventq,gerror,priq,cmdq-sync" order, we would need to sacrifice the command queue sync interrupt as well, which might not be desired. Relax the binding to allow specifying certain useful combinations of wired interrupts, for instance just the "gerror" interrupt, or omitting both "pri" and "cmdq-sync". Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-2-andre.przywara@arm.com
2022-05-06Revert "dt-bindings: rcc: Add optional external ethernet RX clock properties"Rob Herring
This reverts commit 694ed9922bc821e7208bc6593b5eeb88f8382fd5. The same commit was also applied to stm32 tree. Signed-off-by: Rob Herring <robh@kernel.org>
2022-05-05dt-bindings: timer: Convert rda,8810pl-timer to YAMLStanislav Jakubek
Convert RDA Micro Timer bindings to DT schema format. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220504175502.GA2573@standask-GA-A55M-S2HP
2022-05-04dt-bindings: pci: apple,pcie: Drop max-link-speed from exampleHector Martin
We no longer use these since 111659c2a570 (and they never worked anyway); drop them from the example to avoid confusion. Fixes: 111659c2a570 ("arm64: dts: apple: t8103: Remove PCIe max-link-speed properties") Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502091308.28233-1-marcan@marcan.st
2022-05-04dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemasRob Herring
Another round of removing redundant minItems/maxItems when 'items' list is specified. This time it is in if/then schemas as the meta-schema was failing to check this case. If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. Signed-off-by: Rob Herring <robh@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Link: https://lore.kernel.org/r/20220503162738.3827041-1-robh@kernel.org
2022-05-04dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drainRob Herring
A few platforms, at91 and tegra, use drive-push-pull and drive-open-drain with a 0 or 1 value. There's not really a need for values as '1' should be equivalent to no value (it wasn't treated that way) and drive-push-pull disabled is equivalent to drive-open-drain. So dropping the value can't be done without breaking existing OSs. As we don't want new cases, mark the case with values as deprecated. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220429194610.2741437-1-robh@kernel.org
2022-05-03dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindingsKuldeep Singh
GENI(generic interface) based Qualcomm Universal Peripheral controller can support multiple serial interfaces like SPI,UART and I2C. Unlike other I2C controllers, QUP I2C bindings are present in parent schema. Move it out from parent to an individual binding and let parent refer to child schema later on. Please note, current schema isn't complete as it misses out few properties and thus, add these missing properties along the process. Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220404182938.29492-2-singh.kuldeep87k@gmail.com
2022-05-03of: overlay: do not free changeset when of_overlay_apply returns errorFrank Rowand
New unittests for overlay notifiers reveal a memory leak in of_overlay_apply() when a notifier returns an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is: OF: ERROR: memory leak, expected refcount 1 instead of 3, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data/overlay-node/test-bus/test-unittest17 Change the error path to no longer call free_overlay_changeset(), and document that the caller of of_overlay_fdt_apply() may choose to remove the overlay. Update the unittest that triggered the error to expect the changed return values and to call of_overlay_remove(). Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502181742.1402826-4-frowand.list@gmail.com
2022-05-03of: overlay: unittest: add tests for overlay notifiersFrank Rowand
Add tests for overlay apply and remove notifiers. Trigger errors for each of the notifier actions. These tests will reveal a memory leak problem when a notifier returns an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is: OF: ERROR: memory leak, expected refcount 1 instead of 3, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data/overlay-node/test-bus/test-unittest17 Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502181742.1402826-3-frowand.list@gmail.com
2022-05-03of: overlay: add entry to of_overlay_action_name[]Frank Rowand
The values of enum of_overlay_notify_action are used to index into array of_overlay_action_name. Add an entry to of_overlay_action_name for the value recently added to of_overlay_notify_action. Array of_overlay_action_name[] is moved into include/linux/of.h adjacent to enum of_overlay_notify_action to make the connection between the two more obvious if either is modified in the future. The only use of of_overlay_action_name is for error reporting in overlay_notify(). All callers of overlay_notify() report the same error, but with fewer details. Remove the redundant error reports in the callers. Fixes: 067c098766c6 ("of: overlay: rework overlay apply and remove kfree()s") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502181742.1402826-2-frowand.list@gmail.com
2022-05-03dt-bindings: mailbox: qcom-ipcc: add missing properties into exampleDavid Heidelberg
These missing required properties are needed for smp2p binding reference checks. Also includes cosmetic change to the example formatting. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220426101837.16201-2-david@ixit.cz
2022-05-03dt-bindings: mailbox: qcom-ipcc: add missing compatible for SM8450David Heidelberg
Fill missing compatible already used in SM8450 DTS. Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220426101837.16201-1-david@ixit.cz
2022-05-03dt-bindings: gnss: Add Broacom BCM4751 family bindingsLinus Walleij
The Broadcom BCM4751 family of (A-)GPS chips have been around for some years. The latest iteration BCM4753 is for example mounted on the Huawei HiKey970. Cc: devicetree@vger.kernel.org Cc: phone-devel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220425132215.1309216-1-linus.walleij@linaro.org
2022-05-03dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatibleRob Herring
The samsung,s524ad0xd1 compatible is in use, but not documented. According to arch/arm/mach-s3c/mach-smdk6410.c, the samsung,s524ad0xd1 is compatible with the 24c128. As the schema requires a fallback compatible to the corresponding Atmel compatible, 'atmel,24c128' is added as a fallback. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220426175938.2262966-1-robh@kernel.org
2022-05-02dt-bindings: spmi: spmi-pmic-arb: make interrupt properties as optionalDavid Collins
Make all interrupt related properties as optional instead of required. Some boards do not required PMIC IRQ support and it isn't needed to handle SPMI bus transactions, so specify it as optional. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1651108369-11059-9-git-send-email-quic_fenglinw@quicinc.com
2022-05-02dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yamlDavid Heidelberg
Convert Qualcomm PMIC SPMI binding to yaml format. Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211227170151.73116-1-david@ixit.cz
2022-05-02dt-bindings: wkup-m3-ipc: Add firmware-name propertyDave Gerlach
Document that the firmware-name property can be used to indicate a file contains I2C sequences for PMIC voltage scaling during deep sleep. Based on previous work by Russ Dill. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> [dfustini: split from driver patch and convert to json-schema] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220426200741.712842-2-dfustini@baylibre.com
2022-04-28dt-bindings: fsl: convert fsl,layerscape-scfg to YAMLMichael Walle
Convert the fsl,layerscape-scfg binding to the new YAML format. In the device trees, the device node always have a "syscon" compatible, which wasn't mentioned in the previous binding. Also added, compared to the original binding, is the interrupt-controller subnode as used in arch/arm/boot/dts/ls1021a.dtsi as well as the litte-endian and big-endian properties. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220427075338.1156449-5-michael@walle.cc
2022-04-28dt-bindings: interrupt-controller: fsl,ls-extirq: convert to YAMLMichael Walle
Convert the fsl,ls-extirq binding to the new YAML format. In contrast to the original binding documentation, there are three compatibles which are used in their corresponding device trees which have a specific compatible and the (already documented) fallback compatible: - "fsl,ls1046a-extirq", "fsl,ls1043a-extirq" - "fsl,ls2080a-extirq", "fsl,ls1088a-extirq" - "fsl,lx2160a-extirq", "fsl,ls1088a-extirq" Depending on the number of the number of the external IRQs which is usually 12 except for the LS1021A where there are only 6, the interrupt-map-mask was reduced from 0xffffffff to 0xf and 0x7 respectively and the number of interrupt-map entries have to match. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220427075338.1156449-4-michael@walle.cc
2022-04-27dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'Rob Herring
The binding has both 'unevaluatedProperties: false' and 'additionalProperties: false' which is redundant. 'additionalProperties' is the stricter of the two, so drop 'unevaluatedProperties'. Fixes: e05cab34e417 ("dt-bindings: leds: Add bindings for MT6360 LED") Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220426133508.1849580-1-robh@kernel.org
2022-04-27dt-bindings: ufs: cdns,ufshc: Add power-domainsKrzysztof Kozlowski
The Cadence UFS controller can be part of power domain (as it is in example DTS of TI J721e UFS Host Controller Glue), so allow such property. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220427065802.110402-1-krzysztof.kozlowski@linaro.org
2022-04-26dt-bindings: arm: mediatek: infracfg: Convert to DT schemaYassine Oudjana
Convert infracfg bindings to DT schema format. Not all drivers currently implement resets, so #reset-cells is made a required property only for those that do. Using power-controller in the example node name makes #power-domain-cells required causing a dt_binding_check error. To solve this, the node is renamed to syscon@10001000. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220424084647.76577-4-y.oudjana@protonmail.com
2022-04-26dt-bindings: arm: mediatek: apmixedsys: Convert to DT schemaYassine Oudjana
Convert apmixedsys bindings to DT schema format. MT2701, MT7623 and MT7629 device trees currently have the syscon compatible without it being mentioned in the old DT bindings file which introduces dtbs_check errors when converting to DT schema as-is, so mediatek,mt2701-apmixedsys and mediatek,mt7629-apmixedsys are placed in the last items list with the syscon compatible, and syscon is added to the mediatek,mt7623-apmixedsys list. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220424084647.76577-3-y.oudjana@protonmail.com
2022-04-26dt-bindings: arm: mediatek: topckgen: Convert to DT schemaYassine Oudjana
Convert topckgen bindings to DT schema format. MT2701, MT7623 and MT7629 device trees currently have the syscon compatible without it being mentioned in the old DT bindings file which introduces dtbs_check errors when converting to DT schema as-is, so mediatek,mt2701-topckgen and mediatek,mt7629-topckgen are placed in the last items list with the syscon compatible, and syscon is added to the mediatek,mt7623-topckgen list. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220424084647.76577-2-y.oudjana@protonmail.com
2022-04-26dt-bindings: Drop empty and unreferenced binding .txt filesRob Herring
Drop a couple of old, empty .txt binding files which are no longer referenced. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220422191958.2589318-1-robh@kernel.org
2022-04-26dt-bindings: mfd: mediatek: Add bindings for MT6360 PMICGene Chen
Add bindings for MT6360 PMIC Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1608779989-9641-1-git-send-email-gene.chen.richtek@gmail.com
2022-04-25dt-bindings: timer: Add compatible for am6 for TI timer-dmTony Lindgren
Let's add compatible for ti,am654-timer for TI am64, am65 and j72 SoCs. As the timer hardware is the same between am64, am65 and j72 we use the compatible name for the earliest SoC with this timer. The timer interrupts are not routable for the operating system for some timers on am6. Let's make sure the interrupts are configured for the timers on all other SoCs. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220414085807.7389-3-tony@atomide.com
2022-04-25dt-bindings: timer: Update TI timer to yamlTony Lindgren
Let's update the TI timer binding to use yaml. As this binding is specific to the TI dual-mode timers also known as dm-timers, let's use file name ti,timer-dm.yaml to avoid confusion with other timers. We add checks for the deprecated ti,hwmods property as done for other TI device driver bindings earlier. We also correct the issue with the old binding that was out of date for several properties. The am43 related timers are undocumented, but compatible with the am3 timers. Let's add the am43 timers too. The dm814 and dm816 timers are missing, let's add them. Some timers on some SoCs are dual mapped, like the ABE timers on omap4 and 5. The reg property maxItems must be updated to 2. The timer clocks can be managed by the parent interconnect target module with no clocks assigned for the timer node. And in some cases, the SoC may need to configure additional system clock for the timer in addition to the functional clock. The clock names are optional and not specific to the comptible property. For example, dra7 timers on l3 interconnect do not need clock-names, while the timers on dra7 l4 interconnect need them with both being compatible with ti,omap5430-timer. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220414085807.7389-2-tony@atomide.com
2022-04-25dt-bindings: timer: renesas: ostm: Document Renesas RZ/G2UL OSTMBiju Das
Document the General Timer Module(a.k.a OSTM) found on the RZ/G2UL SoC. OSTM module is identical to one found RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,ostm" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220425141828.197321-1-biju.das.jz@bp.renesas.com
2022-04-25dt-bindings: fsl: convert fsl,layerscape-dcfg to YAMLMichael Walle
Convert the fsl,layerscape-dcfg binding to the new YAML format. In the device trees, the device node always have a "syscon" compatible, which wasn't mentioned in the previous binding. One thing added here, compared to the original binding is the clock controller subnode of the LS1028A SoC and its "simple-mfd" compatible as used in arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi as well as the little-endian and big-endian properties. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220425140433.33936-1-michael@walle.cc
2022-04-25dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoCBiju Das
Document RZ/G2UL I2C bindings. RZ/G2UL I2C is identical to one found on the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible string "renesas,riic-rz" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220425133152.176949-1-biju.das.jz@bp.renesas.com
2022-04-25dt-bindings: gnss: Rewrite Mediatek bindings in YAMLLinus Walleij
This rewrites the Mediatek GNSS bindings in YAML. Cc: devicetree@vger.kernel.org Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220425132947.1311171-1-linus.walleij@linaro.org
2022-04-25of: overlay: rework overlay apply and remove kfree()sFrank Rowand
Fix various kfree() issues related to of_overlay_apply(). - Double kfree() of fdt and tree when init_overlay_changeset() returns an error. - free_overlay_changeset() free the root of the unflattened overlay (variable tree) instead of the memory that contains the unflattened overlay. - For the case of a failure during applying an overlay, move kfree() of new_fdt and overlay_mem into free_overlay_changeset(), which is called by the function that allocated them. - For the case of removing an overlay, the kfree() of new_fdt and overlay_mem remains in free_overlay_changeset(). - Check return value of of_fdt_unflatten_tree() for error instead of checking the returned value of overlay_root. - When storing pointers to allocated objects in ovcs, do so as near to the allocation as possible instead of in deeply layered function. More clearly document policy related to lifetime of pointers into overlay memory. Double kfree() Reported-by: Slawomir Stepien <slawomir.stepien@nokia.com> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220420222505.928492-3-frowand.list@gmail.com
2022-04-25of: overlay: rename variables to be consistentFrank Rowand
Variables change name across function calls when there is not a good reason to do so. Fix by changing "fdt" to "new_fdt" and "tree" to "overlay_root". The name disparity was confusing when creating the following commit. The name changes are in this separate commit to make review of the following commmit less complex. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220420222505.928492-2-frowand.list@gmail.com
2022-04-25of: overlay: do not break notify on NOTIFY_{OK|STOP}Nuno Sá
We should not break overlay notifications on NOTIFY_{OK|STOP} otherwise we might break on the first fragment. We should only stop notifications if a *real* errno is returned by one of the listeners. Fixes: a1d19bd4cf1fe ("of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220420130205.89435-1-nuno.sa@analog.com
2022-04-19docs: dt: writing-schema: mention yamllintKrzysztof Kozlowski
The dtschema uses yamllint, if present, to check the syntax of the files, so document this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220419084942.27409-1-krzysztof.kozlowski@linaro.org
generated by cgit (git 2.34.1) at 2025-07-16 00:02:32 +0000