summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-17clocksource/drivers/kona: Fix get_counter() error handlingArnd Bergmann
I could not figure out why, but GCC cannot prove that the kona_timer_init() function always initializes its two outputs, and we get a warning for the use of the 'lsw' variable later, which is obviously correct. drivers/clocksource/bcm_kona_timer.c: In function 'kona_timer_init': drivers/clocksource/bcm_kona_timer.c:119:13: error: 'lsw' may be used uninitialized in this function [-Werror=maybe-uninitialized] Slightly reordering the loop makes the warning disappear, after it becomes more obvious to the compiler that the loop is always entered on the first iteration. As pointed out by Ray Jui, there is a related problem in the way we deal with the loop running into the limit, as we just keep going there with an invalid counter data, so instead we now propagate a -ETIMEDOUT result to the caller. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Ray Jui <ray.jui@broadcom.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bcm-kernel-feedback-list@broadcom.com Link: http://lkml.kernel.org/r/1471429296-9053-2-git-send-email-daniel.lezcano@linaro.org Link: https://patchwork.kernel.org/patch/9174261/ Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17clocksource/drivers/time-armada-370-xp: Fix the clock referenceGregory CLEMENT
While converting the init function to return an error, the wrong clock was get. This leads to the wrong clock rate and slows down the kernel. For example, it affects typical boot time: - without fix: over 1 minute - with fix: 15 seconds Tested-by: Stefan Roese <sr@denx.de> Tested-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 12549e27c63c ("clocksource/drivers/time-armada-370-xp: Convert init function to return error") Link: http://lkml.kernel.org/r/1471429296-9053-1-git-send-email-daniel.lezcano@linaro.org [ Refined the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17arm64: KVM: report configured SRE value to 32-bit worldVladimir Murzin
After commit b34f2bc ("arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value") we report SRE value to 64-bit guest, but 32-bit one still handled as RAZ/WI what leads to funny promise we do not keep: "GICv3: GIC: unable to set SRE (disabled at EL2), panic ahead" Instead, return the actual value of the ICC_SRE_EL1 register that the guest should see. [ Tweaked commit message - Christoffer ] Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17arm64: KVM: remove misleading comment on pmu statusVladimir Murzin
Comment about how PMU access is handled is not relavant since v4.6 where proper PMU support was added in. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17genirq: Correctly configure the trigger on chained interruptsMarc Zyngier
Commit 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") moved the trigger configuration call from the irqdomain mapping to the interrupt being actually requested. This patch failed to handle the case where we configure a chained interrupt, which doesn't get requested through the usual path. In order to solve this, let's call __irq_set_trigger just before starting the cascade interrupt. Special care must be taken to make the flow handler stick, as the .irq_set_type method could have reset it (it doesn't know we're dealing with a chained interrupt). Based on an initial patch by Jon Hunter. Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") Reported-by: John Stultz <john.stultz@linaro.org> Reported-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-17KVM: arm/arm64: timer: Workaround misconfigured timer interruptMarc Zyngier
Similarily to f005bd7e3b84 ("clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered"), make sure we can survive an interrupt that has been misconfigured as edge-triggered by forcing it to be level-triggered (active low is assumed, but the GIC doesn't really care whether this is high or low). Hopefully, the amount of shouting in the kernel log will convince the user to do something about their firmware. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17arm64: Document workaround for Cortex-A72 erratum #853709Marc Zyngier
We already have a workaround for Cortex-A57 erratum #852523, but Cortex-A72 r0p0 to r0p2 do suffer from the same issue (known as erratum #853709). Let's document the fact that we already handle this. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17KVM: arm/arm64: Change misleading use of is_error_pfnChristoffer Dall
When converting a gfn to a pfn, we call gfn_to_pfn_prot, which returns various kinds of error values. It turns out that is_error_pfn() only returns true when the gfn was found in a memory slot and could somehow not be used, but it does not return true if the gfn does not belong to any memory slot. Change use to is_error_noslot_pfn() which covers both cases. Note: Since we already check for kvm_is_error_hva(hva) explicitly in the caller of this function while holding the kvm->srcu lock protecting the memory slots, this should never be a problem, but nevertheless this change is warranted as it shows the intention of the code. Reported-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-16block: Fix race triggered by blk_set_queue_dying()Bart Van Assche
blk_set_queue_dying() can be called while another thread is submitting I/O or changing queue flags, e.g. through dm_stop_queue(). Hence protect the QUEUE_FLAG_DYING flag change with locking. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-17Merge branch 'iomap-fixes-4.8-rc3' into for-nextDave Chinner
2016-08-17xfs: remove OWN_AG rmap when allocating a block from the AGFLDarrick J. Wong
When we're really tight on space, xfs_alloc_ag_vextent_small() can allocate a block from the AGFL and give it to the caller. Since the caller is never the AGFL-fixing method, we must remove the OWN_AG reverse mapping because it will clash with whatever rmap the caller wants to set up. This bug was discovered by running generic/299 repeatedly. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes from Michael Tsirkin: - test fixes - a vsock fix * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: add dma stubs vhost/test: fix after swiotlb changes vhost/vsock: drop space available check for TX vq ringtest: test build fix
2016-08-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes, minor cleanup and a change to the default config" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: fix failing CUIR assignment under LPAR s390/pageattr: handle numpages parameter correctly s390/dasd: fix hanging device after clear subchannel s390/qdio: avoid reschedule of outbound tasklet once killed s390/qdio: remove checks for ccw device internal state s390/qdio: fix double return code evaluation s390/qdio: get rid of spin_lock_irqsave usage s390/cio: remove subchannel_id from ccw_device_private s390/qdio: obtain subchannel_id via ccw_device_get_schid() s390/cio: stop using subchannel_id from ccw_device_private s390/config: make the vector optimized crc function builtin s390/lib: fix memcmp and strstr s390/crc32-vx: Fix checksum calculation for small sizes s390: clarify compressed image code path
2016-08-17xfs: (re-)implement FIEMAP_FLAG_XATTRChristoph Hellwig
Use a special read-only iomap_ops implementation to support fiemap on the attr fork. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17xfs: simplify xfs_file_iomap_beginChristoph Hellwig
We'll never get nimap == 0 for a successful return from xfs_bmapi_read, so don't try to handle it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17iomap: mark ->iomap_end as optionalChristoph Hellwig
No need to implement it for read-only mappings. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17iomap: prepare iomap_fiemap for attribute mappingsDave Chinner
By bassing through an -ENOENT, similar to the old XFS implementation of FIEMAP_FLAG_XATTR. Signed-off-by: Dave Chinner <dchinner@redhat.com> [hch: split from a larger patch] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17iomap: fiemap should honor the FIEMAP_FLAG_SYNC flagDave Chinner
The flag is checked as supported, but then we do an unconditional sync of the file, regardless of whether the flag is set or not. Make the sync conditional on having the FIEMAP_FLAG_SYNC flag set. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17iomap: remove superflous pagefault_disable from iomap_write_actorChristoph Hellwig
iov_iter_copy_from_user_atomic disables page faults internally, no need to do it around the call. This also brings the iomap code in line with the original filemap version. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17iomap: remove superflous mark_page_accessed from iomap_write_actorChristoph Hellwig
This catches up with commit 2457ae ("mm: non-atomically mark page accessed during page cache allocation where possible"), which moved the initial access marking into the pagecache allocator. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17xfs: store rmapbt block count in the AGFDarrick J. Wong
Track the number of blocks used for the rmapbt in the AGF. When we get to the AG reservation code we need this counter to quickly make our reservation during mount. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17xfs: don't invalidate whole file on DAX read/writeDave Chinner
When we do DAX IO, we try to invalidate the entire page cache held on the file. This is incorrect as it will trash the entire mapping tree that now tracks dirty state in exceptional entries in the radix tree slots. What we are trying to do is remove cached pages (e.g from reads into holes) that sit in the radix tree over the range we are about to write to. Hence we should just limit the invalidation to the range we are about to overwrite. Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17xfs: fix bogus space reservation in xfs_iomap_write_allocateChristoph Hellwig
The space reservations was without an explaination in commit "Add error reporting calls in error paths that return EFSCORRUPTED" back in 2003. There is no reason to reserve disk blocks in the transaction when allocating blocks for delalloc space as we already reserved the space when creating the delalloc extent. With this fix we stop running out of the reserved pool in generic/229, which has happened for long time with small blocksize file systems, and has increased in severity with the new buffered write path. [ dchinner: we still need to pass the block reservation into xfs_bmapi_write() to ensure we don't deadlock during AG selection. See commit dbd5c8c ("xfs: pass total block res. as total xfs_bmapi_write() parameter") for more details on why this is necessary. ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-17xfs: don't assert fail on non-async buffers on ioacct decrementBrian Foster
The buffer I/O accounting mechanism tracks async buffers under I/O. As an optimization, the buffer I/O count is incremented only once on the first async I/O for a given hold cycle of a buffer and decremented once the buffer is released to the LRU (or freed). xfs_buf_ioacct_dec() has an ASSERT() check for an XBF_ASYNC buffer, but we have one or two corner cases where a buffer can be submitted for I/O multiple times via different methods in a single hold cycle. If an async I/O occurs first, the I/O count is incremented. If a sync I/O occurs before the hold count drops, XBF_ASYNC is cleared by the time the I/O count is decremented. Remove the async assert check from xfs_buf_ioacct_dec() as this is a perfectly valid scenario. For the purposes of I/O accounting, we really only care about the buffer async state at I/O submission time. Discovered-and-analyzed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-16Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Missing ULL suffixes for 64-bit constants in sha3. - Two caam AEAD regressions. - Bogus setkey hooks in non-hmac caam hashes. - Missing kbuild dependency for powerpc crc32c" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix non-hmac hashes crypto: powerpc - CRYPT_CRC32C_VPMSUM should depend on ALTIVEC crypto: caam - defer aead_set_sh_desc in case of zero authsize crypto: caam - fix echainiv(authenc) encrypt shared descriptor crypto: sha3 - Add missing ULL suffixes for 64-bit constants
2016-08-16i40e: check for and deal with non-contiguous TCsDave Ertman
The i40e driver was causing a kernel panic when non-contiguous Traffic Classes, or Traffic Classes not starting with TC0, were configured on a link partner switch. i40e does not support non-contiguous TCs. To fix this, the patch changes the logic when determining the total number of TCs enabled. Before, this would use the highest TC number enabled and assume that all TCs below it were also enabled. Now, we create a bitmask of enabled TCs and scan it to determine not only the number of TCs, but also if the set of enabled TCs starts at zero and is contiguous. If not, then DCB is disabled by only returning one TC. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-16dm raid: enhance attempt_restore_of_faulty_devices() to support more devicesHeinz Mauelshagen
attempt_restore_of_faulty_devices() is limited to 64 when it should support the new maximum of 253 when identifying any failed devices. It clears any revivable devices via an MD personality hot remove and add cylce to allow for their recovery. Address by using existing functions to retrieve and update all failed devices' bitfield members in the dm raid superblocks on all RAID devices and check for any devices to clear in it. Whilst on it, don't call attempt_restore_of_faulty_devices() for any MD personality not providing disk hot add/remove methods (i.e. raid0 now), because such personalities don't support reviving of failed disks. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-16ixgbe: Re-enable ability to toggle VLAN filteringAlexander Duyck
Back when I submitted the GSO code I messed up and dropped the support for disabling the VLAN tag filtering via the feature bit. This patch re-enables the use of the NETIF_F_HW_VLAN_CTAG_FILTER to enable/disable the VLAN filtering independent of toggling promiscuous mode. Fixes: b83e30104b ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-16dm raid: fix restoring of failed devices regressionHeinz Mauelshagen
'lvchange --refresh RaidLV' causes a mapped device suspend/resume cycle aiming at device restore and resync after transient device failures. This failed because flag RT_FLAG_RS_RESUMED was always cleared in the suspend path, thus the device restore wasn't performed in the resume path. Solve by removing RT_FLAG_RS_RESUMED from the suspend path and resume unconditionally. Also, remove superfluous comment from raid_resume(). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-16ixgbe: Force VLNCTRL.VFE to be set in all VMDq pathsAlexander Duyck
When I was adding the code for enabling VLAN promiscuous mode with SR-IOV enabled I had inadvertently left the VLNCTRL.VFE bit unchanged as I has assumed there was code in another path that was setting it when we enabled SR-IOV. This wasn't the case and as a result we were just disabling VLAN filtering for all the VFs apparently. Also the previous patches were always clearing CFIEN which was always set to 0 by the hardware anyway so I am dropping the redundant bit clearing. Fixes: 16369564915a ("ixgbe: Add support for VLAN promiscuous with SR-IOV") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-16dm raid: fix frozen recovery regressionHeinz Mauelshagen
On LVM2 conversions via lvconvert(8), the target keeps mapped devices in frozen state when requesting RAID devices be resynchronized. This applies to e.g. adding legs to a raid1 device or taking over from raid0 to raid4 when the rebuild flag's set on the new raid1 legs or the added dedicated parity stripe. Also, fix frozen recovery for reshaping as well. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-16PCI: Use positive flags in pci_alloc_irq_vectors()Christoph Hellwig
Instead of passing negative flags like PCI_IRQ_NOMSI to prevent use of certain interrupt types, pass positive flags like PCI_IRQ_LEGACY, PCI_IRQ_MSI, etc., to specify the acceptable interrupt types. This is based on a number of pending driver conversions that just happend to be a whole more obvious to read this way, and given that we have no users in the tree yet it can still easily be done. I've also added a PCI_IRQ_ALL_TYPES catchall to keep the case of accepting all interrupt types very simple. [bhelgaas: changelog, fix PCI_IRQ_AFFINITY doc typo, remove mention of PCI_IRQ_NOLEGACY] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-08-16Merge tag 'pinctrl-v4.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here are a few pin control fixes for the v4.8 series, nothing special about them: - Add the missing <linux/io.h> header to the Intel Merrifield driver to get rid of build mess. - Drop two instances of pinctrl_unregister() called for drivers using devm_* resource management. - Remove the default debounce time for the AMD driver" * tag 'pinctrl-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: intel: merrifield: Add missed header pinctrl/amd: Remove the default de-bounce time pinctrl: pistachio: Drop pinctrl_unregister for devm_ registered device pinctrl: meson: Drop pinctrl_unregister for devm_ registered device
2016-08-16perf unwind: Use addr_location::addr instead of ip for entriesMilian Wolff
This fixes the srcline translation for call chains of user space applications. Before we got: perf report --stdio --no-children -s sym,srcline -g address 8.92% [.] main mandelbrot.h:41 | |--3.70%--main +8390240 | __libc_start_main +139950056726769 | _start +8388650 | |--2.74%--main +8390189 | --2.08%--main +8390296 __libc_start_main +139950056726769 _start +8388650 7.59% [.] main complex:1326 | |--4.79%--main +8390203 | __libc_start_main +139950056726769 | _start +8388650 | --2.80%--main +8390219 7.12% [.] __muldc3 libgcc2.c:1945 | |--3.76%--__muldc3 +139950060519490 | main +8390224 | __libc_start_main +139950056726769 | _start +8388650 | --3.32%--__muldc3 +139950060519512 main +8390224 With this patch applied, we instead get: perf report --stdio --no-children -s sym,srcline -g address 8.92% [.] main mandelbrot.h:41 | |--3.70%--main mandelbrot.h:41 | __libc_start_main +241 | _start +4194346 | |--2.74%--main mandelbrot.h:41 | --2.08%--main mandelbrot.h:41 __libc_start_main +241 _start +4194346 7.59% [.] main complex:1326 | |--4.79%--main complex:1326 | __libc_start_main +241 | _start +4194346 | --2.80%--main complex:1326 7.12% [.] __muldc3 libgcc2.c:1945 | |--3.76%--__muldc3 libgcc2.c:1945 | main mandelbrot.h:39 | __libc_start_main +241 | _start +4194346 | --3.32%--__muldc3 libgcc2.c:1945 main mandelbrot.h:39 Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> LPU-Reference: 20160816153926.11288-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-16Merge tag 'perf-urgent-for-mingo-20160815' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix occasional decoding errors when tracing system-wide with Intel PT (Adrian Hunter) - Fix ip compression in Intel PT for some specific packet types not present on current hardware (Adrian Hunter) - Fix annotation of objects with debuginfo files (Anton Blanchard) - Fix build on Fedora Rawhide (25) wrt using the right header to get the major() & minor() definitions in the jitdump code, now it is deprecated getting those using sys/types.h, one has to use sys/sysmacros.h (Arnaldo Carvalho de Melo) - Sync arm64/s390 kvm related header files (Arnaldo Carvalho de Melo) - Check for dup and fdopen failures in 'perf probe' (Colin Ian King, Arnaldo Carvalho de Melo) - Fix showing callchains in pipe mode, i.e. perf record -g -o - workload | perf script now shows callchains (He Kuang) - Show proper message when the scripts directory points to some invalid location in 'perf script --list' (He Kuang) - Fix 'perf mem -t store' to record 'cpu/mem-stores/P' events again (Jiri Olsa) - Fix ppc64le build failure when libelf is not present (Ravi Bangoria) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-16e1000e: fix PTP on e1000_pch_lpt variantsJarod Wilson
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used as a PTP slave experiences random ~10 hour clock jumps, which are resolved if the same workaround for the 82574 and 82583 is employed, so set the appropriate flag2 in e1000_pch_lpt_info too. Reported-by: Rupesh Patel <rupatel@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-16e1000e: factor out systim sanitizationJarod Wilson
This is prepatory work for an expanding list of adapter families that have occasional ~10 hour clock jumps when being used for PTP. Factor out the sanitization function and convert to using a feature (bug) flag, per suggestion from Jesse Brandeburg. Littering functional code with device-specific checks is much messier than simply checking a flag, and having device-specific init set flags as needed. There are probably a number of other cases in the e1000e code that could/should be converted similarly. Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-16igb: fix adjusting PTP timestamps for Tx/Rx latencyKshitiz Gupta
Fix PHY delay compensation math in igb_ptp_tx_hwtstamp() and igb_ptp_rx_rgtstamp. Add PHY delay compensation in igb_ptp_rx_pktstamp(). In the IGB driver, there are two functions that retrieve timestamps received by the PHY - igb_ptp_rx_rgtstamp() and igb_ptp_rx_pktstamp(). The previous commit only changed igb_ptp_rx_rgtstamp(), and the change was incorrect. There are two instances in which PHY delay compensations should be made: - Before the packet transmission over the PHY, the latency between when the packet is timestamped and transmission of the packets, should be an add operation, but it is currently a subtract. - After the packets are received from the PHY, the latency between the receiving and timestamping of the packets should be a subtract operation, but it is currently an add. Signed-off-by: Kshitiz Gupta <kshitiz.gupta@ni.com> Fixes: 3f544d2 (igb: adjust ptp timestamps for tx/rx latency) Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-16KVM: arm64: ITS: avoid re-mapping LPIsAndre Przywara
When a guest wants to map a device-ID/event-ID combination that is already mapped, we may end up in a situation where an LPI is never "put", thus never being freed. Since the GICv3 spec says that mapping an already mapped LPI is UNPREDICTABLE, lets just bail out early in this situation to avoid any potential leaks. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-16block: Fix secure eraseAdrian Hunter
Commit 288dab8a35a0 ("block: add a separate operation type for secure erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering all the places REQ_OP_DISCARD was being used to mean either. Fix those. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 288dab8a35a0 ("block: add a separate operation type for secure erase") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-16drm/amdgpu: Change GART offset to 64-bitFelix Kuehling
The GART aperture size can be bigger than 4GB. Therefore the offset used in amdgpu_gart_bind and amdgpu_gart_unbind must be 64-bit. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-16ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startupChristoph Huber
commit cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") refactored code such that the SSC is reset on every startup; this breaks duplex audio (e.g. first start audio playback, then start record, causing the playback to stop/hang) Fixes: cbaadf0f90d6 (ASoC: atmel_ssc_dai: refactor the startup and shutdown) Signed-off-by: Christoph Huber <c.huber@bct-electronic.com> Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-08-16PM / hibernate: Fix rtree_next_node() to avoid walking off list endsJames Morse
rtree_next_node() walks the linked list of leaf nodes to find the next block of pages in the struct memory_bitmap. If it walks off the end of the list of nodes, it walks the list of memory zones to find the next region of memory. If it walks off the end of the list of zones, it returns false. This leaves the struct bm_position's node and zone pointers pointing at their respective struct list_heads in struct mem_zone_bm_rtree. memory_bm_find_bit() uses struct bm_position's node and zone pointers to avoid walking lists and trees if the next bit appears in the same node/zone. It handles these values being stale. Swap rtree_next_node()s 'step then test' to 'test-next then step', this means if we reach the end of memory we return false and leave the node and zone pointers as they were. This fixes a panic on resume using AMD Seattle with 64K pages: [ 6.868732] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 6.875753] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 6.896453] PM: Using 3 thread(s) for decompression. [ 6.896453] PM: Loading and decompressing image data (5339 pages)... [ 7.318890] PM: Image loading progress: 0% [ 7.323395] Unable to handle kernel paging request at virtual address 00800040 [ 7.330611] pgd = ffff000008df0000 [ 7.334003] [00800040] *pgd=00000083fffe0003, *pud=00000083fffe0003, *pmd=00000083fffd0003, *pte=0000000000000000 [ 7.344266] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 7.349825] Modules linked in: [ 7.352871] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W I 4.8.0-rc1 #4737 [ 7.360512] Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1002C 04/08/2016 [ 7.369109] task: ffff8003c0220000 task.stack: ffff8003c0280000 [ 7.375020] PC is at set_bit+0x18/0x30 [ 7.378758] LR is at memory_bm_set_bit+0x24/0x30 [ 7.383362] pc : [<ffff00000835bbc8>] lr : [<ffff0000080faf18>] pstate: 60000045 [ 7.390743] sp : ffff8003c0283b00 [ 7.473551] [ 7.475031] Process swapper/0 (pid: 1, stack limit = 0xffff8003c0280020) [ 7.481718] Stack: (0xffff8003c0283b00 to 0xffff8003c0284000) [ 7.800075] Call trace: [ 7.887097] [<ffff00000835bbc8>] set_bit+0x18/0x30 [ 7.891876] [<ffff0000080fb038>] duplicate_memory_bitmap.constprop.38+0x54/0x70 [ 7.899172] [<ffff0000080fcc40>] snapshot_write_next+0x22c/0x47c [ 7.905166] [<ffff0000080fe1b4>] load_image_lzo+0x754/0xa88 [ 7.910725] [<ffff0000080ff0a8>] swsusp_read+0x144/0x230 [ 7.916025] [<ffff0000080fa338>] load_image_and_restore+0x58/0x90 [ 7.922105] [<ffff0000080fa660>] software_resume+0x2f0/0x338 [ 7.927752] [<ffff000008083350>] do_one_initcall+0x38/0x11c [ 7.933314] [<ffff000008b40cc0>] kernel_init_freeable+0x14c/0x1ec [ 7.939395] [<ffff0000087ce564>] kernel_init+0x10/0xfc [ 7.944520] [<ffff000008082e90>] ret_from_fork+0x10/0x40 [ 7.949820] Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) [ 7.955909] ---[ end trace 0024a5986e6ff323 ]--- [ 7.960529] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Here struct mem_zone_bm_rtree's start_pfn has been returned instead of struct rtree_node's addr as the node/zone pointers are corrupt after we walked off the end of the lists during mark_unsafe_pages(). This behaviour was exposed by commit 6dbecfd345a6 ("PM / hibernate: Simplify mark_unsafe_pages()"), which caused mark_unsafe_pages() to call duplicate_memory_bitmap(), which uses memory_bm_find_bit() after walking off the end of the memory bitmap. Fixes: 3a20cb177961 (PM / Hibernate: Implement position keeping in radix tree) Signed-off-by: James Morse <james.morse@arm.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-16ASoC: compress: Fix leak of a widget list in soc_compr_open_feCharles Keepax
After we have called dpcm_path_get we should make sure to call dpcm_path_put on all error paths. This was not happening causing the allocated widget list to be leaked, this patch corrects this by adding a dpcm_path_put to the error path. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-16crypto: sha512-mb - fix ctx pointerXiaodong Liu
1. fix ctx pointer Use req_ctx which is the ctx for the next job that have been completed in the lanes instead of the first completed job rctx, whose completion could have been called and released. Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16crypto: sha256-mb - fix ctx pointer and digest copyXiaodong Liu
1. fix ctx pointer Use req_ctx which is the ctx for the next job that have been completed in the lanes instead of the first completed job rctx, whose completion could have been called and released. 2. fix digest copy Use XMM register to copy another 16 bytes sha256 digest instead of a regular register. Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16xhci: don't dereference a xhci member after removing xhciMathias Nyman
Remove the hcd after checking for the xhci last quirks, not before. This caused a hang on a Alpine Ridge xhci based maching which remove the whole xhci controller when unplugging the last usb device CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16usb: xhci: Fix panic if disconnectJim Lin
After a device is disconnected, xhci_stop_device() will be invoked in xhci_bus_suspend(). Also the "disconnect" IRQ will have ISR to invoke xhci_free_virt_device() in this sequence. xhci_irq -> xhci_handle_event -> handle_cmd_completion -> xhci_handle_cmd_disable_slot -> xhci_free_virt_device If xhci->devs[slot_id] has been assigned to NULL in xhci_free_virt_device(), then virt_dev->eps[i].ring in xhci_stop_device() may point to an invlid address to cause kernel panic. virt_dev = xhci->devs[slot_id]; : if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) [] Unable to handle kernel paging request at virtual address 00001a68 [] pgd=ffffffc001430000 [] [00001a68] *pgd=000000013c807003, *pud=000000013c807003, *pmd=000000013c808003, *pte=0000000000000000 [] Internal error: Oops: 96000006 [#1] PREEMPT SMP [] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G U [] Workqueue: pm pm_runtime_work [] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti: ffffffc0bc0ec000 [] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4 This issue is found when running with realtek ethernet device (0bda:8153). Signed-off-by: Jim Lin <jilin@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16xhci: really enqueue zero length TRBs.Alban Browaeys
Enqueue the first TRB even if full_len is zero. Without this "adb install <apk>" freezes the system. Signed-off-by: Alban Browaeys <alban.browaeys@gmail.com> Fixes: 86065c2719a5 ("xhci: don't rely on precalculated value of needed trbs in the enqueue loop") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16xhci: always handle "Command Ring Stopped" eventsMathias Nyman
Fix "Command completion event does not match command" errors by always handling the command ring stopped events. The command ring stopped event is generated as a result of aborting or stopping the command ring with a register write. It is not caused by a command in the command queue, and thus won't have a matching command in the comman list. Solve it by handling the command ring stopped event before checking for a matching command. In most command time out cases we abort the command ring, and get a command ring stopped event. The events command pointer will point at the current command ring dequeue, which in most cases matches the timed out command in the command list, and no error messages are seen. If we instead get a command aborted event before the command ring stopped event, the abort event will increse the command ring dequeue pointer, and the following command ring stopped events command pointer will point at the next, not yet queued command. This case triggered the error message Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-19 21:26:05 +0000