summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-07platform: mellanox: select REGMAP instead of depending on itRandy Dunlap
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". For NVSW_SN2201, select REGMAP_I2C instead of depending on it. Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver") Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Michael Shych <michaelsh@nvidia.com> Cc: Mark Gross <markgross@kernel.org> Cc: Vadim Pasternak <vadimp@nvidia.com> Cc: platform-driver-x86@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-6-rdunlap@infradead.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07platform/x86/intel/tpmi: Fix double free reported by SmatchSrinivas Pandruvada
Fix warning: drivers/platform/x86/intel/tpmi.c:253 tpmi_create_device() warn: 'feature_vsec_dev' was already freed. If there is some error, feature_vsec_dev memory is freed as part of resource managed call intel_vsec_add_aux(). So, additional kfree() call is not required. Reordered res allocation and feature_vsec_dev, so that on error only res is freed. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/platform-driver-x86/Y%2FxYR7WGiPayZu%2FR@kili/T/#u Fixes: 47731fd2865f ("platform/x86/intel: Intel TPMI enumeration driver") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20230227140614.2913474-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07platform/x86: ISST: Increase range of valid mail box commandsSrinivas Pandruvada
A new command CONFIG_TDP_GET_RATIO_INFO is added, with sub command type of 0x0C. The previous range of valid sub commands was from 0x00 to 0x0B. Change the valid range from 0x00 to 0x0C. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20230227053504.2734214-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07platform/x86: dell-ddv: Fix temperature scalingArmin Wolf
After using the built-in UEFI hardware diagnostics to compare the measured battery temperature, i noticed that the temperature is actually expressed in tenth degree kelvin, similar to the SBS-Data standard. For example, a value of 2992 is displayed as 26 degrees celsius. Fix the scaling so that the correct values are being displayed. Tested on a Dell Inspiron 3505. Fixes: a77272c16041 ("platform/x86: dell: Add new dell-wmi-ddv driver") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230218115318.20662-2-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07platform/x86: dell-ddv: Fix cache invalidation on resumeArmin Wolf
If one or both sensor buffers could not be initialized, either due to missing hardware support or due to some error during probing, the resume handler will encounter undefined behaviour when attempting to lock buffers then protected by an uninitialized or destroyed mutex. Fix this by introducing a "active" flag which is set during probe, and only invalidate buffers which where flaged as "active". Tested on a Dell Inspiron 3505. Fixes: 3b7eeff93d29 ("platform/x86: dell-ddv: Add hwmon support") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230218115318.20662-1-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07platform/x86/amd: pmc: remove CONFIG_SUSPEND checksArnd Bergmann
The amd_pmc_write_stb() function was previously hidden in an ifdef to avoid a warning when CONFIG_SUSPEND is disabled, but now there is an additional caller: drivers/platform/x86/amd/pmc.c: In function 'amd_pmc_stb_debugfs_open_v2': drivers/platform/x86/amd/pmc.c:256:8: error: implicit declaration of function 'amd_pmc_write_stb'; did you mean 'amd_pmc_read_stb'? [-Werror=implicit-function-declaration] 256 | ret = amd_pmc_write_stb(dev, AMD_PMC_STB_DUMMY_PC); | ^~~~~~~~~~~~~~~~~ | amd_pmc_read_stb There is now an easier way to handle this using DEFINE_SIMPLE_DEV_PM_OPS() to replace all the #ifdefs, letting gcc drop any of the unused functions silently. Fixes: b0d4bb973539 ("platform/x86/amd: pmc: Write dummy postcode into the STB DRAM") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230214152512.806188-1-arnd@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07netfilter: conntrack: adopt safer max chain lengthEric Dumazet
Customers using GKE 1.25 and 1.26 are facing conntrack issues root caused to commit c9c3b6811f74 ("netfilter: conntrack: make max chain length random"). Even if we assume Uniform Hashing, a bucket often reachs 8 chained items while the load factor of the hash table is smaller than 0.5 With a limit of 16, we reach load factors of 3. With a limit of 32, we reach load factors of 11. With a limit of 40, we reach load factors of 15. With a limit of 50, we reach load factors of 24. This patch changes MIN_CHAINLEN to 50, to minimize risks. Ideally, we could in the future add a cushion based on expected load factor (2 * nf_conntrack_max / nf_conntrack_buckets), because some setups might expect unusual values. Fixes: c9c3b6811f74 ("netfilter: conntrack: make max chain length random") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-03-06Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-03-06 We've added 8 non-merge commits during the last 7 day(s) which contain a total of 9 files changed, 64 insertions(+), 18 deletions(-). The main changes are: 1) Fix BTF resolver for DATASEC sections when a VAR points at a modifier, that is, keep resolving such instances instead of bailing out, from Lorenz Bauer. 2) Fix BPF test framework with regards to xdp_frame info misplacement in the "live packet" code, from Alexander Lobakin. 3) Fix an infinite loop in BPF sockmap code for TCP/UDP/AF_UNIX, from Liu Jian. 4) Fix a build error for riscv BPF JIT under PERF_EVENTS=n, from Randy Dunlap. 5) Several BPF doc fixes with either broken links or external instead of internal doc links, from Bagas Sanjaya. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: check that modifier resolves after pointer btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES bpf, doc: Link to submitting-patches.rst for general patch submission info bpf, doc: Do not link to docs.kernel.org for kselftest link bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser() riscv, bpf: Fix patch_text implicit declaration bpf, docs: Fix link to BTF doc ==================== Link: https://lore.kernel.org/r/20230306215944.11981-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06net: tls: fix device-offloaded sendpage straddling recordsJakub Kicinski
Adrien reports that incorrect data is transmitted when a single page straddles multiple records. We would transmit the same data in all iterations of the loop. Reported-by: Adrien Moulin <amoulin@corp.free.fr> Link: https://lore.kernel.org/all/61481278.42813558.1677845235112.JavaMail.zimbra@corp.free.fr Fixes: c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()") Tested-by: Adrien Moulin <amoulin@corp.free.fr> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230304192610.3818098-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06net: ethernet: mtk_eth_soc: fix RX data corruption issueDaniel Golle
Fix data corruption issue with SerDes connected PHYs operating at 1.25 Gbps speed where we could previously observe about 30% packet loss while the bad packet counter was increasing. As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531 switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using rate-adaptation to 2500Base-X mode, this issue only got exposed now when we started trying to use SFP modules operating with 1.25 Gbps with the BananaPi R3 board. The fix is to set bit 12 which disables the RX FIFO clear function when setting up MAC MCR, MediaTek SDK did the same change stating: "If without this patch, kernel might receive invalid packets that are corrupted by GMAC."[1] [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63 Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC") Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06net: phy: smsc: fix link up detection in forced irq modeHeiner Kallweit
Currently link up can't be detected in forced mode if polling isn't used. Only link up interrupt source we have is aneg complete which isn't applicable in forced mode. Therefore we have to use energy-on as link up indicator. Fixes: 7365494550f6 ("net: phy: smsc: skip ENERGYON interrupt if disabled") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06cpumask: fix incorrect cpumask scanning result checksLinus Torvalds
It turns out that commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations") exposed a number of cases of drivers not checking the result of "cpumask_next()" and friends correctly. The documented correct check for "no more cpus in the cpumask" is to check for the result being equal or larger than the number of possible CPU ids, exactly _because_ we've always done those constant-sized cpumask scans using a widened type before. So the return value of a cpumask scan should be checked with if (cpu >= nr_cpu_ids) ... because the cpumask scan did not necessarily stop exactly *at* that maximum CPU id. But a few cases ended up instead using checks like if (cpu == nr_cpumask_bits) ... which used that internal "widened" number of bits. And that used to work pretty much by accident (ok, in this case "by accident" is simply because it matched the historical internal implementation of the cpumask scanning, so it was more of a "intentionally using implementation details rather than an accident"). But the extended constant-sized optimizations then did that internal implementation differently, and now that code that did things wrong but matched the old implementation no longer worked at all. Which then causes subsequent odd problems due to using what ends up being an invalid CPU ID. Most of these cases require either unusual hardware or special uses to hit, but the random.c one triggers quite easily. All you really need is to have a sufficiently small CONFIG_NR_CPUS value for the bit scanning optimization to be triggered, but not enough CPUs to then actually fill that widened cpumask. At that point, the cpumask scanning will return the NR_CPUS constant, which is _not_ the same as nr_cpumask_bits. This just does the mindless fix with sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/' to fix the incorrect uses. The ones in the SCSI lpfc driver in particular could probably be fixed more cleanly by just removing that repeated pattern entirely, but I am not emptionally invested enough in that driver to care. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/ Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/ Reported-by: Vernon Yang <vernon2gm@gmail.com> Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/ Cc: Yury Norov <yury.norov@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-06Merge branch 'fix resolving VAR after DATASEC'Martin KaFai Lau
Lorenz Bauer says: ==================== See the first patch for a detailed explanation. v2: - Move RESOLVE_TBD assignment out of the loop (Martin) ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-03-06selftests/bpf: check that modifier resolves after pointerLorenz Bauer
Add a regression test that ensures that a VAR pointing at a modifier which follows a PTR (or STRUCT or ARRAY) is resolved correctly by the datasec validator. Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230306112138.155352-3-lmb@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-03-06btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTRLorenz Bauer
btf_datasec_resolve contains a bug that causes the following BTF to fail loading: [1] DATASEC a size=2 vlen=2 type_id=4 offset=0 size=1 type_id=7 offset=1 size=1 [2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none) [3] PTR (anon) type_id=2 [4] VAR a type_id=3 linkage=0 [5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none) [6] TYPEDEF td type_id=5 [7] VAR b type_id=6 linkage=0 This error message is printed during btf_check_all_types: [1] DATASEC a size=2 vlen=2 type_id=7 offset=1 size=1 Invalid type By tracing btf_*_resolve we can pinpoint the problem: btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0 btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0 btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0 btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0 btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22 The last invocation of btf_datasec_resolve should invoke btf_var_resolve by means of env_stack_push, instead it returns EINVAL. The reason is that env_stack_push is never executed for the second VAR. if (!env_type_is_resolve_sink(env, var_type) && !env_type_is_resolved(env, var_type_id)) { env_stack_set_next_member(env, i + 1); return env_stack_push(env, var_type, var_type_id); } env_type_is_resolve_sink() changes its behaviour based on resolve_mode. For RESOLVE_PTR, we can simplify the if condition to the following: (btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved() Since we're dealing with a VAR the clause evaluates to false. This is not sufficient to trigger the bug however. The log output and EINVAL are only generated if btf_type_id_size() fails. if (!btf_type_id_size(btf, &type_id, &type_size)) { btf_verifier_log_vsi(env, v->t, vsi, "Invalid type"); return -EINVAL; } Most types are sized, so for example a VAR referring to an INT is not a problem. The bug is only triggered if a VAR points at a modifier. Since we skipped btf_var_resolve that modifier was also never resolved, which means that btf_resolved_type_id returns 0 aka VOID for the modifier. This in turn causes btf_type_id_size to return NULL, triggering EINVAL. To summarise, the following conditions are necessary: - VAR pointing at PTR, STRUCT, UNION or ARRAY - Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or TYPE_TAG The fix is to reset resolve_mode to RESOLVE_TBD before attempting to resolve a VAR from a DATASEC. Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-03-06bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMESAlexander Lobakin
&xdp_buff and &xdp_frame are bound in a way that xdp_buff->data_hard_start == xdp_frame It's always the case and e.g. xdp_convert_buff_to_frame() relies on this. IOW, the following: for (u32 i = 0; i < 0xdead; i++) { xdpf = xdp_convert_buff_to_frame(&xdp); xdp_convert_frame_to_buff(xdpf, &xdp); } shouldn't ever modify @xdpf's contents or the pointer itself. However, "live packet" code wrongly treats &xdp_frame as part of its context placed *before* the data_hard_start. With such flow, data_hard_start is sizeof(*xdpf) off to the right and no longer points to the XDP frame. Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several places and praying that there are no more miscalcs left somewhere in the code, unionize ::frm with ::data in a flex array, so that both starts pointing to the actual data_hard_start and the XDP frame actually starts being a part of it, i.e. a part of the headroom, not the context. A nice side effect is that the maximum frame size for this mode gets increased by 40 bytes, as xdp_buff::frame_sz includes everything from data_hard_start (-> includes xdpf already) to the end of XDP/skb shared info. Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it hardcoded for 64 bit && 4k pages, it can be made more flexible later on. Minor: align `&head->data` with how `head->frm` is assigned for consistency. Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for clarity. (was found while testing XDP traffic generator on ice, which calls xdp_convert_frame_to_buff() for each XDP frame) Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230224163607.2994755-1-aleksander.lobakin@intel.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-03-06cpumask: Fix typo nr_cpumask_size --> nr_cpumask_bitsAndy Shevchenko
The never used nr_cpumask_size is just a typo, hence use existing redefinition that's called nr_cpumask_bits. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-06bpf, doc: Link to submitting-patches.rst for general patch submission infoBagas Sanjaya
The link for patch submission information in general refers to index page for "Working with the kernel development community" section of kernel docs, whereas the link should have been Documentation/process/submitting-patches.rst instead. Fix it by replacing the index target with the appropriate doc. Fixes: 542228384888f5 ("bpf, doc: convert bpf_devel_QA.rst to use RST formatting") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230228074523.11493-3-bagasdotme@gmail.com
2023-03-06bpf, doc: Do not link to docs.kernel.org for kselftest linkBagas Sanjaya
The question on how to run BPF selftests have a reference link to kernel selftest documentation (Documentation/dev-tools/kselftest.rst). However, it uses external link to the documentation at kernel.org/docs (aka docs.kernel.org) instead, which requires Internet access. Fix this and replace the link with internal linking, by using :doc: directive while keeping the anchor text. Fixes: b7a27c3aafa252 ("bpf, doc: howto use/run the BPF selftests") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230228074523.11493-2-bagasdotme@gmail.com
2023-03-06udf: Warn if block mapping is done for in-ICB filesJan Kara
Now that address space operations are merge dfor in-ICB and normal files, it is more likely some code mistakenly tries to map blocks for in-ICB files. WARN and return error instead of silently returning garbage. Signed-off-by: Jan Kara <jack@suse.cz>
2023-03-06udf: Fix reading of in-ICB filesJan Kara
After merging address space operations of normal and in-ICB files, readahead could get called for in-ICB files which resulted in udf_get_block() being called for these files. udf_get_block() is not prepared to be called for in-ICB files and ends up returning garbage results as it interprets file data as extent list. Fix the problem by skipping readahead for in-ICB files. Fixes: 37a8a39f7ad3 ("udf: Switch to single address_space_operations") Signed-off-by: Jan Kara <jack@suse.cz>
2023-03-06udf: Fix lost writes in udf_adinicb_writepage()Jan Kara
The patch converting udf_adinicb_writepage() to avoid manually kmapping the page used memcpy_to_page() however that copies in the wrong direction (effectively overwriting file data with the old contents). What we should be using is memcpy_from_page() to copy data from the page into the inode and then mark inode dirty to store the data. Fixes: 5cfc45321a6d ("udf: Convert udf_adinicb_writepage() to memcpy_to_page()") Signed-off-by: Jan Kara <jack@suse.cz>
2023-03-06m68k: Only force 030 bus error if PC not in exception tableMichael Schmitz
__get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon. Reported-by: Eero Tamminen <oak@helsinkinet.fi> Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-03-06m68k: mm: Move initrd phys_to_virt handling after paging_init()Geert Uytterhoeven
When booting with an initial ramdisk on platforms where physical memory does not start at address zero (e.g. on Amiga): initrd: 0ef0602c - 0f800000 Zone ranges: DMA [mem 0x0000000008000000-0x000000f7ffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000008000000-0x000000000f7fffff] Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff] Unable to handle kernel access at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<00201d3c>] memcmp+0x28/0x56 As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must not be called before paging_init(). Hence postpone the phys_to_virt handling for the initial ramdisk until after calling paging_init(). While at it, reduce #ifdef clutter by using IS_ENABLED() instead. Fixes: 376e3fdecb0dcae2 ("m68k: Enable memtest functionality") Reported-by: Stephen Walsh <vk3heg@vk3heg.net> Link: https://lists.debian.org/debian-68k/2022/09/msg00007.html Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/4f45f05f377bf3f5baf88dbd5c3c8aeac59d94f0.camel@physik.fu-berlin.de Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/dff216da09ab7a60217c3fc2147e671ae07d636f.1677528627.git.geert@linux-m68k.org
2023-03-06m68k: mm: Fix systems with memory at end of 32-bit address spaceKars de Jong
The calculation of end addresses of memory chunks overflowed to 0 when a memory chunk is located at the end of 32-bit address space. This is the case for the HP300 architecture. Link: https://lore.kernel.org/linux-m68k/CACz-3rhUo5pgNwdWHaPWmz+30Qo9xCg70wNxdf7o5x-6tXq8QQ@mail.gmail.com/ Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230223112349.26675-1-jongk@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-03-06netfilter: tproxy: fix deadlock due to missing BH disableFlorian Westphal
The xtables packet traverser performs an unconditional local_bh_disable(), but the nf_tables evaluation loop does not. Functions that are called from either xtables or nftables must assume that they can be called in process context. inet_twsk_deschedule_put() assumes that no softirq interrupt can occur. If tproxy is used from nf_tables its possible that we'll deadlock trying to aquire a lock already held in process context. Add a small helper that takes care of this and use it. Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/ Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support") Reported-and-tested-by: Major Dávid <major.david@balasys.hu> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-03-06netfilter: ctnetlink: revert to dumping mark regardless of event typeIvan Delalande
It seems that change was unintentional, we have userspace code that needs the mark while listening for events like REPLY, DESTROY, etc. Also include 0-marks in requested dumps, as they were before that fix. Fixes: 1feeae071507 ("netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark") Signed-off-by: Ivan Delalande <colona@arista.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-03-06bnxt_en: Fix the double free during device removalSelvin Xavier
Following warning reported by KASAN during driver unload ================================================================== BUG: KASAN: double-free in bnxt_remove_one+0x103/0x200 [bnxt_en] Free of addr ffff88814e8dd4c0 by task rmmod/17469 CPU: 47 PID: 17469 Comm: rmmod Kdump: loaded Tainted: G S 6.2.0-rc7+ #2 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.3.10 08/15/2019 Call Trace: <TASK> dump_stack_lvl+0x33/0x46 print_report+0x17b/0x4b3 ? __call_rcu_common.constprop.79+0x27e/0x8c0 ? __pfx_free_object_rcu+0x10/0x10 ? __virt_addr_valid+0xe3/0x160 ? bnxt_remove_one+0x103/0x200 [bnxt_en] kasan_report_invalid_free+0x64/0xd0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kasan_slab_free+0x179/0x1c0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kmem_cache_free+0x194/0x350 bnxt_remove_one+0x103/0x200 [bnxt_en] pci_device_remove+0x62/0x110 device_release_driver_internal+0xf6/0x1c0 driver_detach+0x76/0xe0 bus_remove_driver+0x89/0x160 pci_unregister_driver+0x26/0x110 ? strncpy_from_user+0x188/0x1c0 bnxt_exit+0xc/0x24 [bnxt_en] __x64_sys_delete_module+0x21f/0x390 ? __pfx___x64_sys_delete_module+0x10/0x10 ? __pfx_mem_cgroup_handle_over_high+0x10/0x10 ? _raw_spin_lock+0x87/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? __audit_syscall_entry+0x185/0x210 ? ktime_get_coarse_real_ts64+0x51/0x80 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7effcb6fd71b Code: 73 01 c3 48 8b 0d 6d 17 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 17 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffeada270b8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005623660e0750 RCX: 00007effcb6fd71b RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005623660e07b8 RBP: 0000000000000000 R08: 00007ffeada26031 R09: 0000000000000000 R10: 00007effcb771280 R11: 0000000000000206 R12: 00007ffeada272e0 R13: 00007ffeada28bc4 R14: 00005623660e02a0 R15: 00005623660e0750 </TASK> Auxiliary device structures are freed in bnxt_aux_dev_release. So avoid calling kfree from bnxt_remove_one. Also, set bp->edev to NULL before freeing the auxilary private structure. Fixes: d80d88b0dfff ("bnxt_en: Add auxiliary driver support") Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06bnxt_en: Avoid order-5 memory allocation for TPA dataMichael Chan
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO) completions on the aggregation ring. On P5 chips, the maximum number of concurrent TPA is 256 and the amount of memory we allocate is order-5 on systems using 4K pages. Memory allocation failure has been reported: NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1 Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022 Call Trace: dump_stack+0x57/0x6e warn_alloc.cold.120+0x7b/0xdd ? _cond_resched+0x15/0x30 ? __alloc_pages_direct_compact+0x15f/0x170 __alloc_pages_slowpath.constprop.108+0xc58/0xc70 __alloc_pages_nodemask+0x2d0/0x300 kmalloc_order+0x24/0xe0 kmalloc_order_trace+0x19/0x80 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en] ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en] __bnxt_open_nic+0x12e/0x780 [bnxt_en] bnxt_open+0x10b/0x240 [bnxt_en] __dev_open+0xe9/0x180 __dev_change_flags+0x1af/0x220 dev_change_flags+0x21/0x60 do_setlink+0x35c/0x1100 Instead of allocating this big chunk of memory and dividing it up for the concurrent TPA instances, allocate each small chunk separately for each TPA instance. This will reduce it to order-0 allocations. Fixes: 79632e9ba386 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06net: phylib: get rid of unnecessary lockingRussell King (Oracle)
The locking in phy_probe() and phy_remove() does very little to prevent any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA warnings. Remove it. ====================================================== WARNING: possible circular locking dependency detected 6.2.0-dirty #1108 Tainted: G W E ------------------------------------------------------ ip/415 is trying to acquire lock: ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy] but task is already holding lock: ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 rtnl_lock+0x24/0x30 sfp_bus_add_upstream+0x34/0x150 phy_sfp_probe+0x4c/0x94 [libphy] mv3310_probe+0x148/0x184 [marvell10g] phy_probe+0x8c/0x200 [libphy] call_driver_probe+0xbc/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __device_attach_driver+0xc4/0x160 bus_for_each_drv+0x80/0xe0 __device_attach+0xb0/0x1f0 device_initial_probe+0x1c/0x2c bus_probe_device+0xa4/0xb0 device_add+0x360/0x53c phy_device_register+0x60/0xa4 [libphy] fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio] fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio] of_mdiobus_register+0x140/0x340 [of_mdio] orion_mdio_probe+0x298/0x3c0 [mvmdio] platform_probe+0x70/0xe0 call_driver_probe+0x34/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0x104/0x210 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x3c bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __platform_driver_register+0x30/0x3c xt_compat_calc_jump+0x28/0xa4 [x_tables] do_one_initcall+0x50/0x1b0 do_init_module+0x50/0x1fc load_module+0x684/0x744 __do_sys_finit_module+0xc4/0x140 __arm64_sys_finit_module+0x28/0x34 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 -> #0 (&dev->lock){+.+.}-{3:3}: check_prev_add+0xb4/0xc80 validate_chain+0x414/0x47c __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 phy_attach_direct+0x17c/0x3a0 [libphy] phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink] phylink_fwnode_phy_connect+0x48/0x60 [phylink] mvpp2_open+0xec/0x2e0 [mvpp2] __dev_open+0x104/0x214 __dev_change_flags+0x1d4/0x254 dev_change_flags+0x2c/0x7c do_setlink+0x254/0xa50 __rtnl_newlink+0x430/0x514 rtnl_newlink+0x58/0x8c rtnetlink_rcv_msg+0x17c/0x560 netlink_rcv_skb+0x64/0x150 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x1d4/0x2b4 netlink_sendmsg+0x1a4/0x400 ____sys_sendmsg+0x228/0x290 ___sys_sendmsg+0x88/0xec __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&dev->lock); lock(rtnl_mutex); lock(&dev->lock); *** DEADLOCK *** Fixes: 298e54fa810e ("net: phy: add core phylib sfp support") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06net: stmmac: add to set device wake up flag when stmmac init phyRongguang Wei
When MAC is not support PMT, driver will check PHY's WoL capability and set device wakeup capability in stmmac_init_phy(). We can enable the WoL through ethtool, the driver would enable the device wake up flag. Now the device_may_wakeup() return true. But if there is a way which enable the PHY's WoL capability derectly, like in BIOS. The driver would not know the enable thing and would not set the device wake up flag. The phy_suspend may failed like this: [ 32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16 [ 32.409065] PM: Device stmmac-1:00 failed to suspend: error -16 [ 32.409067] PM: Some devices failed to suspend, or early wake event detected Add to set the device wakeup enable flag according to the get_wol function result in PHY can fix the error in this scene. v2: add a Fixes tag. Fixes: 1d8e5b0f3f2c ("net: stmmac: Support WOL with phy") Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-05Linux 6.3-rc1Linus Torvalds
2023-03-05cpumask: re-introduce constant-sized cpumask optimizationsLinus Torvalds
Commit aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-05Merge tag 'v6.3-p2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
2023-03-05Merge tag 'x86-urgent-2023-03-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 updates from Thomas Gleixner: "A small set of updates for x86: - Return -EIO instead of success when the certificate buffer for SEV guests is not large enough - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on return to userspace for performance reasons, but the leaves user space vulnerable to cross-thread attacks which STIBP prevents. Update the documentation accordingly" * tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Return -EIO if certificate buffer is not large enough Documentation/hw-vuln: Document the interaction between IBRS and STIBP x86/speculation: Allow enabling STIBP with legacy IBRS
2023-03-05Merge tag 'irq-urgent-2023-03-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "A set of updates for the interrupt susbsystem: - Prevent possible NULL pointer derefences in irq_data_get_affinity_mask() and irq_domain_create_hierarchy() - Take the per device MSI lock before invoking code which relies on it being hold - Make sure that MSI descriptors are unreferenced before freeing them. This was overlooked when the platform MSI code was converted to use core infrastructure and results in a fals positive warning - Remove dead code in the MSI subsystem - Clarify the documentation for pci_msix_free_irq() - More kobj_type constification" * tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced genirq/msi: Drop dead domain name assignment irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy() genirq/irqdesc: Make kobj_type structures constant PCI/MSI: Clarify usage of pci_msix_free_irq() genirq/msi: Take the per-device MSI lock before validating the control structure genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
2023-03-05Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs update from Al Viro: "Adding Christian Brauner as VFS co-maintainer" * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Adding VFS co-maintainer
2023-03-05Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull VM_FAULT_RETRY fixes from Al Viro: "Some of the page fault handlers do not deal with the following case correctly: - handle_mm_fault() has returned VM_FAULT_RETRY - there is a pending fatal signal - fault had happened in kernel mode Correct action in such case is not "return unconditionally" - fatal signals are handled only upon return to userland and something like copy_to_user() would end up retrying the faulting instruction and triggering the same fault again and again. What we need to do in such case is to make the caller to treat that as failed uaccess attempt - handle exception if there is an exception handler for faulting instruction or oops if there isn't one. Over the years some architectures had been fixed and now are handling that case properly; some still do not. This series should fix the remaining ones. Status: - m68k, riscv, hexagon, parisc: tested/acked by maintainers. - alpha, sparc32, sparc64: tested locally - bug has been reproduced on the unpatched kernel and verified to be fixed by this series. - ia64, microblaze, nios2, openrisc: build, but otherwise completely untested" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: openrisc: fix livelock in uaccess nios2: fix livelock in uaccess microblaze: fix livelock in uaccess ia64: fix livelock in uaccess sparc: fix livelock in uaccess alpha: fix livelock in uaccess parisc: fix livelock in uaccess hexagon: fix livelock in uaccess riscv: fix livelock in uaccess m68k: fix livelock in uaccess
2023-03-05Remove Intel compiler supportMasahiro Yamada
include/linux/compiler-intel.h had no update in the past 3 years. We often forget about the third C compiler to build the kernel. For example, commit a0a12c3ed057 ("asm goto: eradicate CC_HAS_ASM_GOTO") only mentioned GCC and Clang. init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC, and nobody has reported any issue. I guess the Intel Compiler support is broken, and nobody is caring about it. Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is deprecated: $ icc -v icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is deprecated and will be removed from product release in the second half of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended compiler moving forward. Please transition to use this compiler. Use '-diag-disable=10441' to disable this message. icc version 2021.7.0 (gcc version 12.1.0 compatibility) Arnd Bergmann provided a link to the article, "Intel C/C++ compilers complete adoption of LLVM". lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept untouched for better sync with https://github.com/facebook/zstd Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.html Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-05Adding VFS co-maintainerAl Viro
Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-03-04Merge tag 'i2c-for-6.3-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Some improvements/fixes for the newly added GXP driver and a Kconfig dependency fix" * tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gxp: fix an error code in probe i2c: gxp: return proper error on address NACK i2c: gxp: remove "empty" switch statement i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
2023-03-04mm: avoid gcc complaint about pointer castingLinus Torvalds
The migration code ends up temporarily stashing information of the wrong type in unused fields of the newly allocated destination folio. That all works fine, but gcc does complain about the pointer type mis-use: mm/migrate.c: In function ‘__migrate_folio_extract’: mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’ 1050 | *anon_vmap = (void *)dst->mapping; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ and gcc is actually right to complain since it really doesn't understand that this is a very temporary special case where this is ok. This could be fixed in different ways by just obfuscating the assignment sufficiently that gcc doesn't see what is going on, but the truly "proper C" way to do this is by explicitly using a union. Using unions for type conversions like this is normally hugely ugly and syntactically nasty, but this really is one of the few cases where we want to make it clear that we're not doing type conversion, we're really re-using the value bit-for-bit just using another type. IOW, this should not become a common pattern, but in this one case using that odd union is probably the best way to document to the compiler what is conceptually going on here. [ Side note: there are valid cases where we convert pointers to other pointer types, notably the whole "folio vs page" situation, where the types actually have fundamental commonalities. The fact that the gcc note is limited to just randomized structures means that we don't see equivalent warnings for those cases, but it migth also mean that we miss other cases where we do play these kinds of dodgy games, and this kind of explicit conversion might be a good idea. ] I verified that at least for an allmodconfig build on x86-64, this generates the exact same code, apart from line numbers and assembler comment changes. Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Cc: Huang, Ying <ying.huang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-04Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4
2023-03-04Merge tag 'powerpc-6.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Drop orphaned VAS MAINTAINERS entry - Fix build errors with clang and KCSAN - Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together with recordmcount Thanks to Nathan Chancellor. * tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Avoid dead code/data elimination when using recordmcount powerpc/vmlinux.lds: Add .text.asan/tsan sections powerpc: Drop orphaned VAS MAINTAINERS entry
2023-03-04Merge tag 'sound-fix-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of various small fixes that have been gathered since the last PR. The majority of changes are for ASoC, and there is a small change in ASoC PCM core, but the rest are all for driver- specific fixes / quirks / updates" * tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits) ALSA: ice1712: Delete unreachable code in aureon_add_controls() ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC ALSA: hda/realtek: Improve support for Dell Precision 3260 ASoC: mediatek: mt8195: add missing initialization ASoC: mediatek: mt8188: add missing initialization ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43) ASoC: zl38060 add gpiolib dependency ASoC: sam9g20ek: Disable capture unless building with microphone input ASoC: mt8192: Fix range for sidetone positive gain ASoC: mt8192: Report an error if when an invalid sidetone gain is written ASoC: mt8192: Fix event generation for controls ASoC: mt8192: Remove spammy log messages ASoC: mchp-pdmc: fix poc noise at capture startup ASoC: dt-bindings: sama7g5-pdmc: add microchip,startup-delay-us binding ASoC: soc-pcm: add option to start DMA after DAI ASoC: mt8183: Fix event generation for I2S DAI operations ASoC: mt8183: Remove spammy logging from I2S DAI driver ASoC: mt6358: Remove undefined HPx Mux enumeration values ASoC: mt6358: Validate Wake on Voice 2 writes ...
2023-03-03Merge tag 'for-v6.3-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull more power supply updates from Sebastian Reichel: - Fix DT binding for Richtek RT9467 - Fix a NULL pointer check in the power-supply core - Document meaning of absent "present" property * tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: dt-bindings: power: supply: Revise Richtek RT9467 compatible name ABI: testing: sysfs-class-power: Document absence of "present" property power: supply: fix null pointer check order in __power_supply_register
2023-03-03Merge tag '6.3-rc-smb3-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull more cifs updates from Steve French: - xfstest generic/208 fix (memory leak) - minor netfs fix (to address smatch warning) - a DFS fix for stable - a reconnect race fix - two multichannel fixes - RDMA (smbdirect) fix - two additional writeback fixes from David * tag '6.3-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix memory leak in direct I/O cifs: prevent data race in cifs_reconnect_tcon() cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID iov: Fix netfs_extract_user_to_sg() cifs: Fix cifs_write_back_from_locked_folio() cifs: reuse cifs_match_ipaddr for comparison of dstaddr too cifs: match even the scope id for ipv6 addresses cifs: Fix an uninitialised variable cifs: Add some missing xas_retry() calls
2023-03-03umh: simplify the capability pointer logicLinus Torvalds
The usermodehelper code uses two fake pointers for the two capability cases: CAP_BSET for reading and writing 'usermodehelper_bset', and CAP_PI to read and write 'usermodehelper_inheritable'. This seems to be a completely unnecessary indirection, since we could instead just use the pointers themselves, and never have to do any "if this then that" kind of logic. So just get rid of the fake pointer values, and use the real pointer values instead. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-03Merge tag 'cocci-for-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall: "Changes in make coccicheck and improve a semantic patch This makes a couple of changes in make coccicheck related to shell commands. It also updates the api/atomic_as_refcounter semantic patch to include WARNING in the output message, as done in other cases" * tag 'cocci-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccicheck: Use /usr/bin/env scripts: coccicheck: Avoid warning about spurious escape coccinelle: api/atomic_as_refcounter: include message type in output
2023-03-03Merge tag 'rust-fixes-6.3-rc1' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull Rust fix from Miguel Ojeda: "A single build error fix: there was a change during the merge window to a C header parsed by the Rust bindings generator, introducing a type that it does not handle well. The fix tells the generator to treat the type as opaque (for now)" * tag 'rust-fixes-6.3-rc1' of https://github.com/Rust-for-Linux/linux: rust: bindgen: Add `alt_instr` as opaque type
generated by cgit (git 2.34.1) at 2025-07-16 14:59:45 +0000