summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-13arm64: dts: qcom: sc8180x: Flush RSC sleep & wake votesKonrad Dybcio
The rpmh driver will cache sleep and wake votes until the cluster power-domain is about to enter idle, to avoid unnecessary writes. So associate the apps_rsc with the cluster pd, so that it can be notified about this event. Without this, only AMC votes are being commited. Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-4-b4a985f57b8b@linaro.org
2023-06-13arm64: dts: qcom: qdu1000: Flush RSC sleep & wake votesKonrad Dybcio
The rpmh driver will cache sleep and wake votes until the cluster power-domain is about to enter idle, to avoid unnecessary writes. So associate the apps_rsc with the cluster pd, so that it can be notified about this event. Without this, only AMC votes are being commited. Fixes: 6bd20c54b589 ("arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-3-b4a985f57b8b@linaro.org
2023-06-13arm64: dts: qcom: sm6350: Add PSCI idle statesKonrad Dybcio
Add the PSCI idle states so that the CPU (among other things) can reach lower power states. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-2-b4a985f57b8b@linaro.org
2023-06-13arm64: dts: qcom: ipq9574: add few more reserved memory regionAnusha Rao
In IPQ SoCs, bootloader will collect the system RAM contents upon crash for post-morterm analysis. If we don't reserve the memory region used by bootloader, obviously linux will consume it and upon next boot on crash, bootloader will be loaded in the same region, which will lead to loss of some data, sometimes we may miss out critical information. So lets reserve the region used by the bootloader. Similarly SBL copies some data into the reserved region and it will be used in the crash scenario. So reserve 1MB for SBL as well. While at it, drop the size padding in the reserved memory region, wherever applicable Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230602084431.19134-1-quic_anusha@quicinc.com
2023-06-13arm64: dts: qcom: ipq5332: add support for the RDP474 variantKathiravan T
Add the initial device tree support for the Reference Design Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries the support for Console UART, eMMC, I2C and GPIO based buttons. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230605080531.3879-5-quic_kathirav@quicinc.com
2023-06-13dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 familyKathiravan T
Document the MI01.9 (Reference Design Platform 474) board based on IPQ5332 family of SoCs. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230605080531.3879-4-quic_kathirav@quicinc.com
2023-06-13arm64: dts: qcom: sc8280xp: add resets for soundwire controllersSrinivas Kandagatla
Soundwire controllers on sc8280xp needs an explicit reset, add support for this. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608125315.11454-6-srinivas.kandagatla@linaro.org
2023-06-13Merge branch '20230608125315.11454-2-srinivas.kandagatla@linaro.org' into ↵Bjorn Andersson
arm64-for-6.5 Merge the SC8280XP LPASSCC DeviceTree bindings in order to get access to the newly added reset defines.
2023-06-13dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XPSrinivas Kandagatla
The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset support when it is under the control of Q6DSP. Add support for those resets and adds IDs for clients to request the reset. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608125315.11454-3-srinivas.kandagatla@linaro.org
2023-06-13dt-bindings: clock: Add LPASSCC and reset controller for SC8280XPSrinivas Kandagatla
The LPASS (Low Power Audio Subsystem) clock controller provides reset support when it is under the control of Q6DSP. Add support for those resets and adds IDs for clients to request the reset. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608125315.11454-2-srinivas.kandagatla@linaro.org
2023-06-13arm64: dts: qcom: sm8550-mtp: add sound cardKrzysztof Kozlowski
Add the sound card node with tested playback over WSA8845 speakers and WCD9385 headset over USB Type-C. The recording links were not tested, but should be similar to previous platforms. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230612173758.286411-2-krzysztof.kozlowski@linaro.org
2023-06-13arm64: dts: qcom: sm8550-qrd: add sound cardKrzysztof Kozlowski
Add the sound card node with tested playback over WSA8845 speakers and WCD9385 headset over USB Type-C. The recording links were not tested, but should be similar to previous platforms. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230612173758.286411-1-krzysztof.kozlowski@linaro.org
2023-06-13arm64: dts: qcom: sm8550-mtp: add WSA8845 speakersKrzysztof Kozlowski
Add Qualcomm WSA8845 Soundwire smart speaker amplifiers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608094323.267278-2-krzysztof.kozlowski@linaro.org
2023-06-13arm64: dts: qcom: sm8550-qrd: add WSA8845 speakersKrzysztof Kozlowski
Add Qualcomm WSA8845 Soundwire smart speaker amplifiers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608094323.267278-1-krzysztof.kozlowski@linaro.org
2023-06-13arm64: dts: qcom: Add SDX75 platform and IDP board supportRohit Agarwal
Add basic devicetree support for SDX75 platform and IDP board from Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms the Application Processor Sub System (APSS) along with standard Qualcomm peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem etc.. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1686311438-24177-6-git-send-email-quic_rohiagar@quicinc.com
2023-06-13dt-bindings: arm: qcom: Document SDX75 platform and boardsRohit Agarwal
Document the SDX75 platform binding and also the boards using it. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1686311438-24177-2-git-send-email-quic_rohiagar@quicinc.com
2023-06-13Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into arm64-for-6.5Bjorn Andersson
Merge the SDX75 GCC DeviceTree binding, in order to get access to the clock defines in the DeviceTree source.
2023-06-13arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttonsNeil Armstrong
The Volume Down & Power buttons are controlled by the PMIC via the PON hardware, and the Volume Up is connected to a PMIC gpio. Enable the necessary hardware and setup the GPIO state for the Volume Up gpio key. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-4-a288f24af81b@linaro.org
2023-06-13arm64: dts: qcom: pmk8550: always enable RTC PMIC deviceNeil Armstrong
There's no reason to keep the RTC disabled, it has been tested and is functional on the SM8550 QRD and MTP boards. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-3-a288f24af81b@linaro.org
2023-06-13arm64: dts: qcom: sm8550-qrd: add notification RGB LEDNeil Armstrong
The QRD features a notification LED connected to the pm8550. Configure the RGB led controlled by the PMIC PWM controller. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-2-a288f24af81b@linaro.org
2023-06-13arm64: dts: qcom: pm8550: add PWM controllerNeil Armstrong
Add the PWM function to the pm8550 dtsi, this is usually used to drive RGB leds on platforms using this PMIC. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-1-a288f24af81b@linaro.org
2023-06-13arm64: dts: qcom: sc8180x: Move DisplayPort for MMCXBjorn Andersson
The DisplayPort blocks are powered by MMCX and should be described as such to ensure that power votes are done on the right resource. This also solves the problem that sync_state is unaware of the DP controllers needing MMCX to be kept alive during boot. As such this change also fixes occasionally seen crashes during boot due to undervoltage of MMCX. Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230612220739.1886155-1-quic_bjorande@quicinc.com
2023-06-13arm64: dts: qcom: sc8180x: Fix adreno smmu compatibleBjorn Andersson
The adreno smmu should be compatible with qcom,adreno-smmu as well for per-process page tables to work. Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230612220532.1884860-1-quic_bjorande@quicinc.com
2023-06-13arm64: dts: qcom: sc8180x-primus: dispcc is already okayBjorn Andersson
&dispcc status was changed to okay by default in the platform, no need to do it again in the board. Fixes: 2ce38cc1e8fe ("arm64: dts: qcom: sc8180x: Introduce Primus") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230612220420.1884631-1-quic_bjorande@quicinc.com
2023-06-13arm64: dts: qcom: sm8550: add display port nodesNeil Armstrong
Add the Display Port controller subnode to the MDSS node. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v4-2-ac2c6899d22c@linaro.org
2023-06-13arm64: dts: qcom: sm8550: fix low_svs RPMhPD labelsNeil Armstrong
"low" was written "lov", fix this. Fixes: 99d33ee61cb0 ("arm64: dts: qcom: sm8550: Add missing RPMhPD OPP levels") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v4-1-ac2c6899d22c@linaro.org
2023-06-13arm64: dts: qcom: sa8540p-ride: Specify ethernet phy OUIAndrew Halaney
With wider usage on more boards, there have been reports of the following: [ 315.016174] qcom-ethqos 20000.ethernet eth0: no phy at addr -1 [ 315.016179] qcom-ethqos 20000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19) which has been fairly random and isolated to specific boards. Early reports were written off as a hardware issue, but it has been prevalent enough on boards that theory seems unlikely. In bring up of a newer piece of hardware, similar was seen, but this time _consistently_. Moving the reset to the mdio bus level (which isn't exactly a lie, it is the only device on the bus so one could model it as such) fixed things on that platform. Analysis on sa8540p-ride shows that the phy's reset is not being handled during the OUI scan if the reset lives in the phy node: # gpio 752 is the reset, and is active low, first mdio reads are the OUI modprobe-420 [006] ..... 154.738544: mdio_access: stmmac-0 read phy:0x08 reg:0x02 val:0x0141 modprobe-420 [007] ..... 154.738665: mdio_access: stmmac-0 read phy:0x08 reg:0x03 val:0x0dd4 modprobe-420 [004] ..... 154.741357: gpio_value: 752 set 1 modprobe-420 [004] ..... 154.741358: gpio_direction: 752 out (0) modprobe-420 [004] ..... 154.741360: gpio_value: 752 set 0 modprobe-420 [006] ..... 154.762751: gpio_value: 752 set 1 modprobe-420 [007] ..... 154.846857: gpio_value: 752 set 1 modprobe-420 [004] ..... 154.937824: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003 modprobe-420 [004] ..... 154.937932: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014 Moving it to the bus level, or specifying the OUI in the phy's compatible ensures the reset is handled before any mdio access Here is tracing with the OUI approach (which skips scanning the OUI): modprobe-549 [007] ..... 63.860295: gpio_value: 752 set 1 modprobe-549 [007] ..... 63.860297: gpio_direction: 752 out (0) modprobe-549 [007] ..... 63.860299: gpio_value: 752 set 0 modprobe-549 [004] ..... 63.882599: gpio_value: 752 set 1 modprobe-549 [005] ..... 63.962132: gpio_value: 752 set 1 modprobe-549 [006] ..... 64.049379: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003 modprobe-549 [006] ..... 64.049490: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014 The OUI approach is taken given the description matches the situation perfectly (taken from ethernet-phy.yaml): - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" description: If the PHY reports an incorrect ID (or none at all) then the compatible list may contain an entry with the correct PHY ID in the above form. The first group of digits is the 16 bit Phy Identifier 1 register, this is the chip vendor OUI bits 3:18. The second group of digits is the Phy Identifier 2 register, this is the chip vendor OUI bits 19:24, followed by 10 bits of a vendor specific ID. With this in place the sa8540p-ride's phy is probing consistently, so it seems the floating reset during mdio access was the issue. In either case, it shouldn't be floating so this improves the situation. The below link discusses some of the relationship of mdio, its phys, and points to this OUI compatible as a way to opt out of the OUI scan pre-reset handling which influenced this decision. Link: https://lore.kernel.org/all/dca54c57-a3bd-1147-63b2-4631194963f0@gmail.com/ Fixes: 57827e87be54 ("arm64: dts: qcom: sa8540p-ride: Add ethernet nodes") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608201513.882950-1-ahalaney@redhat.com
2023-05-30arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5GBjorn Andersson
Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm SC8180X platform. Supported peripherals includes keyboard, touchpad, UFS storage, external USB and WiFi. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-16-vkoul@kernel.org
2023-05-30arm64: dts: qcom: sc8180x: Introduce PrimusBjorn Andersson
Introduce support for the SC8180X reference device, aka Primus, with debug UART, regulators, UFS and USB support. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-15-vkoul@kernel.org
2023-05-30arm64: dts: qcom: sc8180x: Add pmicsVinod Koul
SC8180X based platforms have PM8150, PM8150C, PMC8180 and SMB2351 PMICs, so add these as well Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-14-vkoul@kernel.org
2023-05-30arm64: dts: qcom: sc8180x: Add display and gpu nodesVinod Koul
This patch adds gpu, gmu, gpucc, dispcc and finally the mdss node with dsi0/1, dp0/1 and edp subnodes as found in this SoC Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-13-vkoul@kernel.org
2023-05-30arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodesVinod Koul
This patch adds remoteprocs, wifi and usb and usb phy nodes for this SoC Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-12-vkoul@kernel.org
2023-05-30arm64: dts: qcom: sc8180x: Add PCIe instancesVinod Koul
This patch adds PCIe instances found on this SoC Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-11-vkoul@kernel.org
2023-05-30arm64: dts: qcom: sc8180x: Add QUPsVinod Koul
This patch adds qup instances and i2c, spi, serial ports Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-10-vkoul@kernel.org
2023-05-30arm64: dts: qcom: sc8180x: Add thermal zonesVinod Koul
This patch adds tsens nodes and thermal zones for sc8180x SoC Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-9-vkoul@kernel.org
2023-05-30arm64: dts: qcom: sc8180x: Add interconnects and lmhVinod Koul
This add interconnect nodes and add LMH to sc8180x SoC dtsi Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-8-vkoul@kernel.org
2023-05-30arm64: dts: qcom: Introduce the SC8180x platformBjorn Andersson
Introduce a base dtsi for the Qualcomm SC8180x platform, with CPUs, global clock controller, SMMU, rpmh clocks, rpmh power-domains, CPUfreq etc Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230530162454.51708-7-vkoul@kernel.org
2023-05-29arm64: dts: qcom: msm8916: Move aliases to boardsStephan Gerhold
MSM8939 has the aliases defined separately for each board (because there could be (theoretically) a board where the slots are numbered differently. To make MSM8916 and MSM8939 more consistent do the same for all MSM8916 boards and move aliases there. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-6-bec0f5fb46fb@gerhold.net
2023-05-29arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codecStephan Gerhold
All definitions in pm8916.dtsi use the &pm8916_ label prefix, only the codec uses the &wcd_codec label. &wcd_codec is confusing because the codec on MSM8916 is split into a "wcd-digital" and "wcd-analog" part and both could be described with &wcd_codec. Let's just name it &pm8916_codec so it's consistent with all other PMIC device nodes. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-5-bec0f5fb46fb@gerhold.net
2023-05-29arm64: dts: qcom: msm8916/39: Clean up MDSS labelsStephan Gerhold
Right now MDSS related definitions cannot be properly grouped together in board DTs because the labels do not use consistent prefixes. The DSI PHY label is particularly weird because the DSI number is at the end (&dsi_phy0) while DSI itself is called &dsi0. Follow the example of more recent SoCs and give all the MDSS related nodes a consistent label that allows proper grouping. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-4-bec0f5fb46fb@gerhold.net
2023-05-29arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrlStephan Gerhold
Make the labels for the BLSP I2C/SPI pinctrl consistent with the one used for UART by adding the missing blsp_ prefix. This allows having them properly grouped together. The nodes are only reordered in msm8939.dtsi for now since the pinctrl definitions in msm8916-pins.dtsi are currently still unordered anyway. (I will try fixing this in a future patch.) Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-3-bec0f5fb46fb@gerhold.net
2023-05-29arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartNStephan Gerhold
For some reason the BLSP UART controllers have a label with a number behind blsp (&blsp1_uartN) while I2C/SPI are named without (&blsp_i2cN). This is confusing, especially for proper node ordering in board DTs. Right now all board DTs are ordered as if the number behind blsp does not exist (&blsp_i2cN comes before &blsp1_uartN). Strictly speaking correct ordering would be the other way around ('1' comes before '_'). End this confusion by giving the UART controllers consistent labels. There is just one BLSP on MSM8916/39 so the number is redundant. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-2-bec0f5fb46fb@gerhold.net
2023-05-29arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmmStephan Gerhold
MSM8916 is the only ARM64 Qualcomm SoC that is still using the old &msmgpio name. Change this to &tlmm to avoid confusion. Note that the node ordering does not change because the MSM8916 device trees have pinctrl separated at the bottom (similar to sc7180). Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-1-bec0f5fb46fb@gerhold.net
2023-05-29arm64: dts: qcom: qrb4210-rb2: Enable USB nodeBhupesh Sharma
Enable the USB controller and HS/SS PHYs on qrb4210-rb2 board. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230516150511.2346357-5-bhupesh.sharma@linaro.org
2023-05-29arm64: dts: qcom: sm6115: Add USB SS qmp phy nodeBhupesh Sharma
Add USB superspeed qmp phy node to dtsi. Make sure that the various board dts files (which include sm4250.dtsi file) continue to work as intended. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230516150511.2346357-4-bhupesh.sharma@linaro.org
2023-05-27arm64: dts: qcom: ipq5332: add support for the RDP442 variantKathiravan T
Add the initial device tree support for the Reference Design Platform(RDP) 442 based on IPQ5332 family of SoC. This patch carries the support for Console UART, SPI NOR, eMMC and I2C. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230509160133.3794-3-quic_kathirav@quicinc.com
2023-05-27dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 familyKathiravan T
Document the MI01.3 (Reference Design Platform 442) board based on IPQ5332 family of SoCs. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230509160133.3794-2-quic_kathirav@quicinc.com
2023-05-26arm64: dts: qcom: sm8550: Add graphics clock controllerJagadeesh Kona
Add device node for graphics clock controller on Qualcomm SM8550 platform. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230524181800.28717-4-quic_jkona@quicinc.com
2023-05-26Merge branch 'sm8450-sm8550-gpucc-binding' into arm64-for-6.5Bjorn Andersson
Introduce DeviceTree bindings for SM8450 and SM8550 GPU clock controller, to introduce the constants necessary to referr to these clocks.
2023-05-26dt-bindings: clock: qcom: Add SM8550 graphics clock controllerJagadeesh Kona
Add device tree bindings for the graphics clock controller on Qualcomm SM8550 platform. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230524181800.28717-2-quic_jkona@quicinc.com
generated by cgit (git 2.34.1) at 2025-07-15 13:15:10 +0000