summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-14Bluetooth: Read number of supported IAC on controller setupMarcel Holtmann
When initializing a controller make sure to read out the number of supported IAC and store its result. This value is needed to determine if limited discoverable for BR/EDR can be configured or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-14Bluetooth: Check that scan window is smaller or equal than scan intervalMarcel Holtmann
The scan window parameter for connection establishment and passive scanning needs to be smaller or equal than the scan interval. Instead of waiting for a controller to reject these values later on, just reject them right away. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-14Bluetooth: Check that bind() bdaddr type matches connect()Johan Hedberg
If a socket was bound to an address type other than BR/EDR (such as LE) we should reject trying to connect it to a BR/EDR address. The same applies for binding to BR/EDR and trying to connect to non-BR/EDR. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Reject invalid bdaddr types for socketsJohan Hedberg
We need to verify that the bdaddr type passed to connect() and bind() is within the set of valid values. If it is not we need to cleanly fail with EINVAL. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Convert Set Discoverable to use an asynchronous requestJohan Hedberg
This patch converts Set Discoverable to use an asynchronous request along with its own completion callback. This is necessary for splitting raw HCI socket use cases from mgmt, as well as for enabling the hooking up of Advertising parameters together with the HCI_DISCOVERABLE flag (coming in later patches). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Fix updating scan mode in set_bredr()Johan Hedberg
Now that the connectable setting is also applicable for the LE side it's possible that the HCI_CONNECTABLE flag is already set when changing the BR/EDR setting from false to true while the controller is powered. In this situation we need to update the BR/EDR scan mode to reflect the setting. Additionally, since HCI_CONNECTABLE also applies to LE we must not clear the HCI_CONNECTABLE flag when disabling bredr. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Move set_bredr_scan() to avoid forward declarationJohan Hedberg
The set_bredr_scan() function will soon be needed by the set_bredr() function, so move it to a new location to avoid having to add a forward declaration. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Make Set Connectable also update the LE advertising typeJohan Hedberg
This patch updates the Set Connectable Management command to also update the LE advertising type to either connectable or non-connectable advertising. An extra helper function is needed for getting the right advertising type since we can not only rely on the HCI_CONNECTABLE flag but must also check for a pending Set Connectable command (in which case the flag does not yet have its final value). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14rt2x00: rt2800lib: remove duplicate rf_vals for RF3053Kevin Lo
lready have rf_vals_3x with same values. Hence rf_vals_3053 is removed in this patch. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt2800lib: fix RF registers for RT5390/RT5392Kevin Lo
Update rf registers to use the same values that the MediaTek/Ralink reference driver DPO_RT5572_LinuxSTA_2.6.1.3_20121022 uses. References: RF5390RegTable in chips/rt5390.c RF5392RegTable in chips/rt5390.c Tested on TP-Link TL-WN727N and D-Link DWA-140 Rev.b3 usb wifi dongles. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14mwifiex: use alloc_workqueue() functionAmitkumar Karwar
It replaces deprecated create_workqueue(). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove references to hw->confFelix Fietkau
Accessing it to get the current operating channel is racy and in the way of further channel handling related changes Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: make ath9k_uses_beacons staticFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: remove sc->config.cabqReadyTimeFelix Fietkau
It is not exposed as a configuration option anyway Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: move channel change code to ath_set_channelFelix Fietkau
Preparation for adding the scanning state machine to ath9k Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: make ath9k_cmn_update_ichannel staticFelix Fietkau
Rework its wrapper function to make it more generic, using it as a replacement for previous calls to ath9k_cmn_update_ichannel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: simplify channel flagsFelix Fietkau
There was some duplication between channelFlags and chanmode, as well as a lot of redundant checks based on the combinations of flags. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove IS_CHAN_OFDM()Felix Fietkau
The hardware is always configured with OFDM support enabled Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove IS_CHAN_B()Felix Fietkau
Hardware 802.11b-only mode isn't supported by the driver (the device is configured for 802.11n/g instead). Simplify the code by removing checks for it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove direct accesses to channel mode flagsFelix Fietkau
Use wrappers where available. Simplifies code and helps with further improvements to the channel data structure Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: use a separate data structure for rx buffersFelix Fietkau
There's no shared code for handling both rx and tx buffers, and tx buffers require a lot more metadata than rx buffers. Using a separate data structure for rx reduces memory usage and improves cache footprint. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14wcn36xx: fix coccinelle warningsFengguang Wu
drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 106 /c/kernel-tests/src/i386/drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 148 This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Generated by: coccinelle/api/simple_open.cocci CC: Eugene Krasnikov <k.eugene.e@gmail.com> CC: John W. Linville <linville@tuxdriver.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt73usb: use rt2x00_has_cap_* helpersGabor Juhos
Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt61pci: use rt2x00_has_cap_* helpersGabor Juhos
Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt2800lib: use rt2x00_has_cap_* helpersGabor Juhos
Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt2x00lib: use rt2x00_has_cap_* helpersGabor Juhos
Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: add rt2x00_has_cap_* helpersGabor Juhos
The rt2x00 code directly accesses the 'cap_flags' field of 'struct rt2x00_dev' when checking presence of a given capability flag. The direct access needs long expressions which lowers readability of the code. Add a few helper functions which can be used to test device capabilities without directly accessing the cap_flags filed. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: cleanup indentation in rt2800.hGabor Juhos
Adjust whitespaces to move badly aligned constants to the right column. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14Bluetooth: Fix updating advertising data needlesslyJohan Hedberg
We need to ensure that the advertising data is up-to-date whenever advertising is enabled, but when disabling advertising we do not need to worry about it (since it will eventually get fixed as soon as advertising is enabled again). This patch fixes this in the command complete callback for set_adv_enable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Move static advertising functions to avoid forward declarationsJohan Hedberg
These functions will soon be used by set_connectable() so move them to a location in mgmt.c that doesn't require forward declarations. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Add missing error handling for Set ConnectableJohan Hedberg
If the HCI commands related to the Set Connectable command fail we will get a non-zero status in the request completion callback. In such a case we must respond with the appropriate command status message to user space. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Move more logic into set_connectable complete callbackJohan Hedberg
This patch moves the responsibility of setting/clearing the HCI_CONNECTABLE flag to the request completion callback of the Set Connectable command. This will allow us to cleanly add support for LE Advertising hooks in later patches. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Reorganize set_connectable HCI command sendingJohan Hedberg
This patch moves all the decisions of which HCI commands to send (or not to send) to the code between hci_req_init() and hci_req_run() this allows us to further extend the request with further commands but still keep the same logic of handling whether to return a direct mgmt response in the case that no HCI commands were sent. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Introduce L2CAP channel callback for resumingMarcel Holtmann
Clearing the BT_SK_SUSPEND socket flag from the L2CAP core is causing a dependency on the socket. So intead of doing that, use a channel callback into the socket handling to resume. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-14Bluetooth: Introduce L2CAP channel flag for defer setupMarcel Holtmann
The L2CAP core should not look into the socket flags to figure out the setting of defer setup. So introduce a L2CAP channel flag that mirrors the socket flag. Since the defer setup option is only set in one place this becomes a really easy thing to do. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-14Bluetooth: Adjust header for proc socket informationMarcel Holtmann
The exposed socket information do not contain source or destination addresses. So adjust the header accordingly. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Increase minor version of core moduleMarcel Holtmann
There have been a lot of changes in the core Bluetooth handling lately. So it is a good idea to increase the module version. The module version is not used anywhere, but it makes debugging a little bit simpler if versions can be distinguished. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Provide msg_name callback for L2CAP connectionless channelsMarcel Holtmann
The L2CAP connectionless channels use SOCK_DGRAM and recvmsg() and need to receive the remote BD_ADDR and PSM information via msg_name from the recvmsg() system call. So in case the L2CAP socket is for connectionless channels, provide a msg_name callback that can update the data. Also store the remote BD_ADDR and PSM in the skb so it can be extracted later on. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Add support for per socket msg_name callbackMarcel Holtmann
This allows to add a per socket msg_name callback that can be used for updating the msg_name information for recvmsg() system calls. This feature is used by another patch to support address information on L2CAP connectionless channels. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Use l2cap_pi(sk) directly where possibleMarcel Holtmann
There are few places where it makes sense to use l2cap_pi(sk) directly instead of assigning it to temporary structure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Remove src and dst fields from bt_sock structureMarcel Holtmann
Every socket protocol now stores its own address information. So just remove the generic src and dst fields since they are no longer needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store RFCOMM address information in its own socket structureMarcel Holtmann
The address information of RFCOMM sockets should be stored in its own socket structure. Trying to generalize them is not helpful since different transports have different address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store SCO address information in its own socket structureMarcel Holtmann
The address information of SCO sockets should be stored in its own socket structure. Trying to generalize them is not helpful since different transports have different address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Use SCO addresses from HCI connection directlyMarcel Holtmann
Instead of storing a pointer to the addresses for the HCI device and HCI connection, use them directly. With the recent changes to address tracking of HCI connections, this becomes simple. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Access BNEP session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Access HIDP session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Access CMTP session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Access RFCOMM session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Return the correct address type for L2CAP socketsMarcel Holtmann
The L2CAP sockets can use BR/EDR public, LE public and LE random addresses for various combinations of source and destination devices. So make sure that getsockname(), getpeername() and accept() return the correct address type. For this the address type of the source and destination is stored with the L2CAP channel information. The stored address type is not the one specific for the HCI protocol. It is the address type used for the L2CAP sockets and the management interface. The underlying HCI connections store the HCI address type. If needed, it gets converted to the socket address type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store address information in L2CAP channel structureMarcel Holtmann
With the effort of abstracting the L2CAP socket from the underlying L2CAP channel it is important to store the source and destination address information directly in the L2CAP channel structure. Direct access to the HCI connection address information is not possible since they might not be avaiable at L2CAP channel creation time. The address information will be updated when the underlying BR/EDR or LE connection status changes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generated by cgit (git 2.34.1) at 2025-07-15 13:20:46 +0000