| Age | Commit message (Collapse) | Author |
|---|
|
This explodes the build if HEAD is signed, since the generated version
is gpg: Signature made Mon 26 Dec 2022 20:34:48 CET, then a few more
lines, then the SHA.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/7c9637711271f50ec2341fb8a7c29585335dab04.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ipu_src_rect_width() was introduced to support odd screen resolutions
such as 1366x768 by internally rounding up primary plane width to a
multiple of 8 and compensating with reduced horizontal blanking.
This also caused overlay plane width to be rounded up, which was not
intended. Fix overlay plane width by limiting the rounding up to the
primary plane.
drm_rect_width(&new_state->src) >> 16 is the same value as
drm_rect_width(dst) because there is no plane scaling support.
Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix")
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20221108141420.176696-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108141420.176696-1-p.zabel@pengutronix.de
Tested-by: Ian Ray <ian.ray@ge.com>
(cherry picked from commit 4333472f8d7befe62359fecb1083cd57a6e07bfc)
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
|
|
Commands such as kmem, kwork, lock, sched, trace and timechart depend on
libtraceevent, these commands need to be isolated using HAVE_LIBTRACEEVENT
macro when cmdlist generation.
The output of the generate-cmdlist.sh script is as follows:
# ./util/generate-cmdlist.sh
/* Automatically generated by ./util/generate-cmdlist.sh */
struct cmdname_help
{
char name[16];
char help[80];
};
static struct cmdname_help common_cmds[] = {
{"annotate", "Read perf.data (created by perf record) and display annotated code"},
{"archive", "Create archive with object files with build-ids found in perf.data file"},
{"bench", "General framework for benchmark suites"},
{"buildid-cache", "Manage build-id cache."},
{"buildid-list", "List the buildids in a perf.data file"},
{"c2c", "Shared Data C2C/HITM Analyzer."},
{"config", "Get and set variables in a configuration file."},
{"daemon", "Run record sessions on background"},
{"data", "Data file related processing"},
{"diff", "Read perf.data files and display the differential profile"},
{"evlist", "List the event names in a perf.data file"},
{"ftrace", "simple wrapper for kernel's ftrace functionality"},
{"inject", "Filter to augment the events stream with additional information"},
{"iostat", "Show I/O performance metrics"},
{"kallsyms", "Searches running kernel for symbols"},
{"kvm", "Tool to trace/measure kvm guest os"},
{"list", "List all symbolic event types"},
{"mem", "Profile memory accesses"},
{"record", "Run a command and record its profile into perf.data"},
{"report", "Read perf.data (created by perf record) and display the profile"},
{"script", "Read perf.data (created by perf record) and display trace output"},
{"stat", "Run a command and gather performance counter statistics"},
{"test", "Runs sanity tests."},
{"top", "System profiling tool."},
{"version", "display the version of perf binary"},
#ifdef HAVE_LIBELF_SUPPORT
{"probe", "Define new dynamic tracepoints"},
#endif /* HAVE_LIBELF_SUPPORT */
#if defined(HAVE_LIBTRACEEVENT) && (defined(HAVE_LIBAUDIT_SUPPORT) || defined(HAVE_SYSCALL_TABLE_SUPPORT))
{"trace", "strace inspired tool"},
#endif /* HAVE_LIBTRACEEVENT && (HAVE_LIBAUDIT_SUPPORT || HAVE_SYSCALL_TABLE_SUPPORT) */
#ifdef HAVE_LIBTRACEEVENT
{"kmem", "Tool to trace/measure kernel memory properties"},
{"kwork", "Tool to trace/measure kernel work properties (latencies)"},
{"lock", "Analyze lock events"},
{"sched", "Tool to trace/measure scheduler properties (latencies)"},
{"timechart", "Tool to visualize total system behavior during a workload"},
#endif /* HAVE_LIBTRACEEVENT */
};
Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221226085703.95081-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_sample'
Since the definition of 'struct perf_sample' has been moved to sample.h,
we need to include this header file to fix the build error as follows:
arch/riscv/util/unwind-libdw.c: In function 'libdw__arch_set_initial_registers':
arch/riscv/util/unwind-libdw.c:12:50: error: invalid use of undefined type 'struct perf_sample'
12 | struct regs_dump *user_regs = &ui->sample->user_regs;
| ^~
Fixes: 9823147da6c893d9 ("perf tools: Move 'struct perf_sample' to a separate header file to disentangle headers")
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: greentime.hu@sifive.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20221231052731.24908-1-eric.lin@sifive.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to
the same as vbG200 to avoid black screen") accidently decreases the
maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB
by missing one zero. This caused the driver initialization to fail with
the messages below, as the minimum required VRAM size is 2 MB:
[ 9.436420] matroxfb: Matrox MGA-G200eW (PCI) detected
[ 9.444502] matroxfb: cannot determine memory size
[ 9.449316] matroxfb: probe of 0000:0a:03.0 failed with error -1
So, add the missing 0 to make it the intended 16 MB. Successfully tested on
the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is
gone.
While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned
properly. The value could probably also be increased from 8 MB to 16 MB, as
the G200 uses the same values, but I have not checked any datasheet.
Note, matroxfb is obsolete and superseded by the maintained DRM driver
mga200, which is used by default on most systems where both drivers are
available. Therefore, on most systems it was only a cosmetic issue.
Fixes: 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen")
Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775
Cc: it+linux-fbdev@molgen.mpg.de
Cc: Z. Liu <liuzx@knownsec.com>
Cc: Rich Felker <dalias@libc.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
In perf_data__open_dir(), opendir() opens the directory stream. Add
missing closedir() to release it after use.
Fixes: eb6176709b235b96 ("perf data: Add perf_data__open_dir_data function")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221229090903.1402395-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.
Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.
This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.
Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com
|
|
The virtio_gpu_object_shmem_init() will alloc memory and save it in
@ents, so when virtio_gpu_array_alloc() fails, this memory should be
freed, this patch fixes it.
Fixes: e7fef0923303 ("drm/virtio: Simplify error handling of virtio_gpu_object_create()")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109091905.55451-1-xiujianfeng@huawei.com
|
|
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.
Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The hash:net,port,net set type supports /0 subnets. However, the patch
commit 5f7b51bf09baca8e titled "netfilter: ipset: Limit the maximal range
of consecutive elements to add/delete" did not take into account it and
resulted in an endless loop. The bug is actually older but the patch
5f7b51bf09baca8e brings it out earlier.
Handle /0 subnets properly in hash:net,port,net set types.
Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: Марк Коренберг <socketpair@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There is an issue with the checking of the return value of
'of_get_mac_address', which returns 0 on success and negative value on
failure. The driver interpretated the result the opposite way. Therefore
if there was a MAC address defined in the DT, then the driver was
generating a random MAC address otherwise it would use address 0.
Fix this by checking correctly the return value of 'of_get_mac_address'
Fixes: b74ef9f9cb91 ("net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The memory allocated by vxlan_vnigroup_init() is not freed in the error
path, leading to memory leaks [1]. Fix by calling
vxlan_vnigroup_uninit() in the error path.
The leaks can be reproduced by annotating gro_cells_init() with
ALLOW_ERROR_INJECTION() and then running:
# echo "100" > /sys/kernel/debug/fail_function/probability
# echo "1" > /sys/kernel/debug/fail_function/times
# echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject
# printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval
# ip link add name vxlan0 type vxlan dstport 4789 external vnifilter
RTNETLINK answers: Cannot allocate memory
[1]
unreferenced object 0xffff88810db84a00 (size 512):
comm "ip", pid 330, jiffies 4295010045 (age 66.016s)
hex dump (first 32 bytes):
f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02 ..v.............
03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00 ....H...........
backtrace:
[<ffffffff81a3097a>] kmalloc_trace+0x2a/0x60
[<ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160
[<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
[<ffffffff836858ca>] register_netdevice+0x57a/0x16d0
[<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
[<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
[<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
[<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
[<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
[<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839066af>] netlink_unicast+0x53f/0x810
[<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
[<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90
[<ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0
[<ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0
[<ffffffff8424da78>] do_syscall_64+0x38/0x80
unreferenced object 0xffff88810e76d5f8 (size 192):
comm "ip", pid 330, jiffies 4295010045 (age 66.016s)
hex dump (first 32 bytes):
04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00 ..........O.....
08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff ..v.......v.....
backtrace:
[<ffffffff81a3162e>] __kmalloc_node+0x4e/0x90
[<ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0
[<ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460
[<ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0
[<ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160
[<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
[<ffffffff836858ca>] register_netdevice+0x57a/0x16d0
[<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
[<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
[<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
[<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
[<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
[<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839066af>] netlink_unicast+0x53f/0x810
[<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
[<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix W=1 kernel-doc warning:
net/sched/sch_htb.c:214: warning: expecting prototype for htb_classify(). Prototype was for HTB_DIRECT() instead
by moving the HTB_DIRECT() macro above the function.
Add kernel-doc notation for function parameters as well.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jamal Hadi Salim says:
====================
net: dont intepret cls results when asked to drop
It is possible that an error in processing may occur in tcf_classify() which
will result in res.classid being some garbage value. Example of such a code path
is when the classifier goes into a loop due to bad policy. See patch 1/2
for a sample splat.
While the core code reacts correctly and asks the caller to drop the packet
(by returning TC_ACT_SHOT) some callers first intepret the res.class as
a pointer to memory and end up dropping the packet only after some activity with
the pointer. There is likelihood of this resulting in an exploit. So lets fix
all the known qdiscs that behave this way.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume that
res.class contains a valid pointer
Sample splat reported by Kyle Zeng
[ 5.405624] 0: reclassify loop, rule prio 0, protocol 800
[ 5.406326] ==================================================================
[ 5.407240] BUG: KASAN: slab-out-of-bounds in cbq_enqueue+0x54b/0xea0
[ 5.407987] Read of size 1 at addr ffff88800e3122aa by task poc/299
[ 5.408731]
[ 5.408897] CPU: 0 PID: 299 Comm: poc Not tainted 5.10.155+ #15
[ 5.409516] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.15.0-1 04/01/2014
[ 5.410439] Call Trace:
[ 5.410764] dump_stack+0x87/0xcd
[ 5.411153] print_address_description+0x7a/0x6b0
[ 5.411687] ? vprintk_func+0xb9/0xc0
[ 5.411905] ? printk+0x76/0x96
[ 5.412110] ? cbq_enqueue+0x54b/0xea0
[ 5.412323] kasan_report+0x17d/0x220
[ 5.412591] ? cbq_enqueue+0x54b/0xea0
[ 5.412803] __asan_report_load1_noabort+0x10/0x20
[ 5.413119] cbq_enqueue+0x54b/0xea0
[ 5.413400] ? __kasan_check_write+0x10/0x20
[ 5.413679] __dev_queue_xmit+0x9c0/0x1db0
[ 5.413922] dev_queue_xmit+0xc/0x10
[ 5.414136] ip_finish_output2+0x8bc/0xcd0
[ 5.414436] __ip_finish_output+0x472/0x7a0
[ 5.414692] ip_finish_output+0x5c/0x190
[ 5.414940] ip_output+0x2d8/0x3c0
[ 5.415150] ? ip_mc_finish_output+0x320/0x320
[ 5.415429] __ip_queue_xmit+0x753/0x1760
[ 5.415664] ip_queue_xmit+0x47/0x60
[ 5.415874] __tcp_transmit_skb+0x1ef9/0x34c0
[ 5.416129] tcp_connect+0x1f5e/0x4cb0
[ 5.416347] tcp_v4_connect+0xc8d/0x18c0
[ 5.416577] __inet_stream_connect+0x1ae/0xb40
[ 5.416836] ? local_bh_enable+0x11/0x20
[ 5.417066] ? lock_sock_nested+0x175/0x1d0
[ 5.417309] inet_stream_connect+0x5d/0x90
[ 5.417548] ? __inet_stream_connect+0xb40/0xb40
[ 5.417817] __sys_connect+0x260/0x2b0
[ 5.418037] __x64_sys_connect+0x76/0x80
[ 5.418267] do_syscall_64+0x31/0x50
[ 5.418477] entry_SYSCALL_64_after_hwframe+0x61/0xc6
[ 5.418770] RIP: 0033:0x473bb7
[ 5.418952] Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00
00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00
00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34
24 89
[ 5.420046] RSP: 002b:00007fffd20eb0f8 EFLAGS: 00000246 ORIG_RAX:
000000000000002a
[ 5.420472] RAX: ffffffffffffffda RBX: 00007fffd20eb578 RCX: 0000000000473bb7
[ 5.420872] RDX: 0000000000000010 RSI: 00007fffd20eb110 RDI: 0000000000000007
[ 5.421271] RBP: 00007fffd20eb150 R08: 0000000000000001 R09: 0000000000000004
[ 5.421671] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[ 5.422071] R13: 00007fffd20eb568 R14: 00000000004fc740 R15: 0000000000000002
[ 5.422471]
[ 5.422562] Allocated by task 299:
[ 5.422782] __kasan_kmalloc+0x12d/0x160
[ 5.423007] kasan_kmalloc+0x5/0x10
[ 5.423208] kmem_cache_alloc_trace+0x201/0x2e0
[ 5.423492] tcf_proto_create+0x65/0x290
[ 5.423721] tc_new_tfilter+0x137e/0x1830
[ 5.423957] rtnetlink_rcv_msg+0x730/0x9f0
[ 5.424197] netlink_rcv_skb+0x166/0x300
[ 5.424428] rtnetlink_rcv+0x11/0x20
[ 5.424639] netlink_unicast+0x673/0x860
[ 5.424870] netlink_sendmsg+0x6af/0x9f0
[ 5.425100] __sys_sendto+0x58d/0x5a0
[ 5.425315] __x64_sys_sendto+0xda/0xf0
[ 5.425539] do_syscall_64+0x31/0x50
[ 5.425764] entry_SYSCALL_64_after_hwframe+0x61/0xc6
[ 5.426065]
[ 5.426157] The buggy address belongs to the object at ffff88800e312200
[ 5.426157] which belongs to the cache kmalloc-128 of size 128
[ 5.426955] The buggy address is located 42 bytes to the right of
[ 5.426955] 128-byte region [ffff88800e312200, ffff88800e312280)
[ 5.427688] The buggy address belongs to the page:
[ 5.427992] page:000000009875fabc refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0xe312
[ 5.428562] flags: 0x100000000000200(slab)
[ 5.428812] raw: 0100000000000200 dead000000000100 dead000000000122
ffff888007843680
[ 5.429325] raw: 0000000000000000 0000000000100010 00000001ffffffff
ffff88800e312401
[ 5.429875] page dumped because: kasan: bad access detected
[ 5.430214] page->mem_cgroup:ffff88800e312401
[ 5.430471]
[ 5.430564] Memory state around the buggy address:
[ 5.430846] ffff88800e312180: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.431267] ffff88800e312200: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 fc
[ 5.431705] >ffff88800e312280: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.432123] ^
[ 5.432391] ffff88800e312300: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 fc
[ 5.432810] ffff88800e312380: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.433229] ==================================================================
[ 5.433648] Disabling lock debugging due to kernel taint
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume
res.class contains a valid pointer
Fixes: b0188d4dbe5f ("[NET_SCHED]: sch_atm: Lindent")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When ceph releasing the file_lock it will try to get the inode pointer
from the fl->fl_file, which the memory could already be released by
another thread in filp_close(). Because in VFS layer the fl->fl_file
doesn't increase the file's reference counter.
Will switch to use ceph dedicate lock info to track the inode.
And in ceph_fl_release_lock() we should skip all the operations if the
fl->fl_u.ceph.inode is not set, which should come from the request
file_lock. And we will set fl->fl_u.ceph.inode when inserting it to the
inode lock list, which is when copying the lock.
Link: https://tracker.ceph.com/issues/57986
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
For the POSIX locks they are using the same owner, which is the
thread id. And multiple POSIX locks could be merged into single one,
so when checking whether the 'file' has locks may fail.
For a file where some openers use locking and others don't is a
really odd usage pattern though. Locks are like stoplights -- they
only work if everyone pays attention to them.
Just switch ceph_get_caps() to check whether any locks are set on
the inode. If there are POSIX/OFD/FLOCK locks on the file at the
time, we should set CHECK_FILELOCK, regardless of what fd was used
to set the lock.
Fixes: ff5d913dfc71 ("ceph: return -EIO if read/write against filp that lost file locks")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Having a bigger number of FIFO lines held after vsync is only useful to
SoCs using AFBC to give time to the AFBC decoder to be reset, configured
and enabled again.
For SoCs not using AFBC this, on the contrary, is causing on some
displays issues and a few pixels vertical offset in the displayed image.
Conditionally increase the number of lines held after vsync only for
SoCs using AFBC, leaving the default value for all the others.
Fixes: 24e0d4058eff ("drm/meson: hold 32 lines after vsync to give time for AFBC start")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: added fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216-afbc_s905x-v1-0-033bebf780d9@baylibre.com
|
|
If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round
again, It will cause infinite loop issue. And all threads from next
connections would be doing that. This patch add max retry count(2) to
avoid it. kernel_recvmsg() will wait during 7sec timeout and try to
retry two time if -EAGAIN is returned. And add flags of kvmalloc to
__GFP_NOWARN and __GFP_NORETRY to disconnect immediately without
retrying on memory alloation failure.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd_decode_ntlmssp_auth_blob
"nt_len - CIFS_ENCPWD_SIZE" is passed directly from
ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests
can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative
number (or large unsigned value) used for a subsequent memcpy in
ksmbd_auth_ntlvm2 and can cause a panic.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Hrvoje Mišetić <misetichrvoje@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, smb2_tree_connect doesn't send an error response packet on
error.
This causes libsmb2 to skip the specific error code and fail with the
following:
smb2_service failed with : Failed to parse fixed part of command
payload. Unexpected size of Error reply. Expected 9, got 8
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
sparse is warning about an incorrect RCU dereference.
fs/nfs/dir.c:2965:56: warning: incorrect type in argument 1 (different address spaces)
fs/nfs/dir.c:2965:56: expected struct cred const *
fs/nfs/dir.c:2965:56: got struct cred const [noderef] __rcu *const cred
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If the user's login time is newer than the cache's timestamp,
we expect the cache may be stale and need to clear.
The stale cache will remain in the list's tail if no other
users operate on that inode.
Once the user accesses the inode, the stale cache will be
returned in rcu path.
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Prevent the leaking of a debug timer in futex_waitv()
- A preempt-RT mutex locking fix, adding the proper acquire semantics
* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
|
|
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
|
|
As stated in marvell-orion-mdio.txt deleted in commit 0781434af811f
("dt-bindings: net: orion-mdio: Convert to JSON schema") if
'interrupts' property is present, width of 'reg' should be 0x84.
Otherwise, width of 'reg' should be 0x4. Fix 'examples:' and add
constraints checking whether 'interrupts' property is present
and validate it against fixed values in reg.
Signed-off-by: Michał Grzelak <mig@semihalf.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This property has always been supported by the Linux driver; see
commit 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i"). In fact, the
original driver submission includes the phy-supply code but no mention
of it in the binding, so the omission appears to be accidental. In
addition, the property is documented in the binding for the previous
hardware generation, allwinner,sun7i-a20-gmac.
Document phy-supply in the binding to fix devicetree validation for the
25+ boards that already use this property.
Fixes: 0441bde003be ("dt-bindings: net-next: Add DT bindings documentation for Allwinner dwmac-sun8i")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is now possible for a system to have more than 32 endpoints. As
a result, registers related to endpoint suspend are parameterized,
with 32 endpoints represented in one more registers.
In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register
offset is determined properly, but the bit mask used still assumes
the number of enpoints won't exceed 32. This is a bug. Fix it.
Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Po-Hsu Lin says:
====================
selftests: net: fix for arp_ndisc_evict_nocarrier test
This patchset will fix a false-positive issue caused by the command in
cleanup_v6() of the arp_ndisc_evict_nocarrier test.
Also, it will make the test to return a non-zero value for any failure
reported in the test for us to avoid false-negative results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
arp_ndisc_evict_nocarrier
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that phylink no longer calls phy_get_rate_matching with
PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the
documentation mandating support.
Fixes: 7642cc28fd37 ("net: phylink: fix PHY validation with rate adaption")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- fix TLB invalidation for DG2 and newer platforms. (Andrzej)
- Remove __maybe_unused from mtl_info (Lucas)
- improve the catch-all evict to handle lock contention (Matt Auld)
- Fix two issues with over-size (GuC/HuC) firmware files (John)
- Fix DSI resume issues on ICL+ (Jani)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
|
|
Christian Marangi says:
====================
net: dsa: qca8k: multiple fix on mdio read/write
Due to some problems in reading the Documentation and elaborating it
some wrong assumption were done. The error was reported and notice only
now due to how things are setup in the code flow.
First 2 patch fix mgmt eth where the lenght calculation is very
confusing and in step of word size. (the related commit description have
an extensive description about how this mess works)
Last 3 patch revert the broken mdio cache and apply a correct version
that should still save some extra mdio in phy poll secnario.
These 5 patch fix each related problem and apply what the Documentation
actually say.
Changes v2:
- Add cover letter
- Fix typo in revert patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Improve mdio master read/write by using singe mii read/write lo/hi.
In a read and write we need to poll the mdio master regs in a busy loop
to check for a specific bit present in the upper half of the reg. We can
ignore the other half since it won't contain useful data. This will save
an additional useless read for each read and write operation.
In a read operation the returned data is present in the mdio master reg
lower half. We can ignore the other half since it won't contain useful
data. This will save an additional useless read for each read operation.
In a read operation it's needed to just set the hi half of the mdio
master reg as the lo half will be replaced by the result. This will save
an additional useless write for each read operation.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It may be useful to read/write just the lo or hi half of a reg.
This is especially useful for phy poll with the use of mdio master.
The mdio master reg is composed by the first 16 bit related to setup and
the other half with the returned data or data to write.
Refactor the mii function to permit single mii read/write of lo or hi
half of the reg.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 2481d206fae7884cd07014fd1318e63af35e99eb.
The Documentation is very confusing about the topic.
The cache logic for hi and lo is wrong and actually miss some regs to be
actually written.
What the Documentation actually intended was that it's possible to skip
writing hi OR lo if half of the reg is not needed to be written or read.
Revert the change in favor of a better and correct implementation.
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was discovered that MGMT_DATA2 can contain up to 28 bytes of data
instead of the 12 bytes written in the Documentation by accounting the
limit of 16 bytes declared in Documentation subtracting the first 4 byte
in the packet header.
Update the define with the real world value.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: c2ee8181fddb ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The assumption that Documentation was right about how this value work was
wrong. It was discovered that the length value of the mgmt header is in
step of word size.
As an example to process 4 byte of data the correct length to set is 2.
To process 8 byte 4, 12 byte 6, 16 byte 8...
Odd values will always return the next size on the ack packet.
(length of 3 (6 byte) will always return 8 bytes of data)
This means that a value of 15 (0xf) actually means reading/writing 32 bytes
of data instead of 16 bytes. This behaviour is totally absent and not
documented in the switch Documentation.
In fact from Documentation the max value that mgmt eth can process is
16 byte of data while in reality it can process 32 bytes at once.
To handle this we always round up the length after deviding it for word
size. We check if the result is odd and we round another time to align
to what the switch will provide in the ack packet.
The workaround for the length limit of 15 is still needed as the length
reg max value is 0xf(15)
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 90386223f44e ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when modifying DC, we validate max_rd_atomic user attribute
against the RC cap, validate against DC. RC and DC QP types have different
device limitations.
This can cause userspace created DC QPs to malfunction.
Fixes: c32a4f296e1d ("IB/mlx5: Add support for DC Initiator QP")
Link: https://lore.kernel.org/r/0c5aee72cea188c3bb770f4207cce7abc9b6fc74.1672231736.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, when mlx5_ib_get_hw_stats() is used for device (port_num = 0),
there is a special handling in order to use the correct counters, but,
port_num is being passed down the stack without any change. Also, some
functions assume that port_num >=1. As a result, the following oops can
occur.
BUG: unable to handle page fault for address: ffff89510294f1a8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 8 PID: 1382 Comm: devlink Tainted: G W 6.1.0-rc4_for_upstream_base_2022_11_10_16_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock+0xc/0x20
Call Trace:
<TASK>
mlx5_ib_get_native_port_mdev+0x73/0xe0 [mlx5_ib]
do_get_hw_stats.constprop.0+0x109/0x160 [mlx5_ib]
mlx5_ib_get_hw_stats+0xad/0x180 [mlx5_ib]
ib_setup_device_attrs+0xf0/0x290 [ib_core]
ib_register_device+0x3bb/0x510 [ib_core]
? atomic_notifier_chain_register+0x67/0x80
__mlx5_ib_add+0x2b/0x80 [mlx5_ib]
mlx5r_probe+0xb8/0x150 [mlx5_ib]
? auxiliary_match_id+0x6a/0x90
auxiliary_bus_probe+0x3c/0x70
? driver_sysfs_add+0x6b/0x90
really_probe+0xcd/0x380
__driver_probe_device+0x80/0x170
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
? driver_allows_async_probing+0x60/0x60
? driver_allows_async_probing+0x60/0x60
bus_for_each_drv+0x7b/0xc0
__device_attach+0xbc/0x200
bus_probe_device+0x87/0xa0
device_add+0x404/0x940
? dev_set_name+0x53/0x70
__auxiliary_device_add+0x43/0x60
add_adev+0x99/0xe0 [mlx5_core]
mlx5_attach_device+0xc8/0x120 [mlx5_core]
mlx5_load_one_devl_locked+0xb2/0xe0 [mlx5_core]
devlink_reload+0x133/0x250
devlink_nl_cmd_reload+0x480/0x570
? devlink_nl_pre_doit+0x44/0x2b0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x180/0x2b0
? devlink_nl_cmd_region_read_dumpit+0x540/0x540
? devlink_reload+0x250/0x250
? devlink_put+0x50/0x50
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x237/0x490
sock_sendmsg+0x33/0x40
__sys_sendto+0x103/0x160
? handle_mm_fault+0x10e/0x290
? do_user_addr_fault+0x1c0/0x5f0
__x64_sys_sendto+0x25/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fix it by setting port_num to 1 in order to get device status and remove
unused variable.
Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE")
Link: https://lore.kernel.org/r/98b82994c3cd3fa593b8a75ed3f3901e208beb0f.1672231736.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
"A single fix to address an issue with wake from suspend with PCS
adapters, from Adam"
* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Fix PCS quirk application for suspend
|
|
Commit 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM
driver")' added rfi_restriction_data_rate_base string, mmio details and
documentation, but missed adding attribute to sysfs.
Add missing sysfs attribute.
Fixes: 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver")
Cc: 5.11+ <stable@vger.kernel.org> # v5.11+
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
|
