| Age | Commit message (Collapse) | Author |
|---|
|
Currently, we will check if inode layout is compression or inline if
the inode is special in fill_inode(). Also set ->i_mapping->a_ops for
it. That is pointless since the both modes won't be set for special
inode when creating EROFS filesystem image. So, let's avoid it.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should consider the error returned by fill_inline_data() when filling
last page in fill_inode(). If not getting inode will be successful even
though last page is bad. That is illogical. Also change -EAGAIN to 0 in
fill_inline_data() to stand for successful filling.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An earlier patch I sent reduced the stack usage enough to get
below the warning limit, and I could show this was safe, but with
GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack
variables in the same function no longer overlap:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Split out the largest two blocks in the affected function into two
separate functions and mark those noinline_for_stack.
Fixes: 8c5af16f7953 ("staging: rtl8712: reduce stack usage")
Fixes: 81a56f6dcd20 ("gcc-plugins: structleak: Generalize to all variable types")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some machines, iio-sensor-proxy was returning all 0's for IIO sensor
values. It turns out that the bits_used for this sensor is 32, which makes
the mask calculation:
*mask = (1 << 32) - 1;
If the compiler interprets the 1 literals as 32-bit ints, it generates
undefined behavior depending on compiler version and optimization level.
On my system, it optimizes out the shift, so the mask value becomes
*mask = (1) - 1;
With a mask value of 0, iio-sensor-proxy will always return 0 for every axis.
Avoid incorrect 0 values caused by compiler optimization.
See original fix by Brett Dutro <brett.dutro@gmail.com> in
iio-sensor-proxy:
https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Another feature of the ADF4371/ADF4372 is that the supply current to the
RF8P and RF8N output stage can shut down until the ADF4371 achieves lock
as measured by the digital lock detect circuitry. The mute to lock
detect bit (MUTE_LD) in REG25 enables this function.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document support for ADF4372 SPI Wideband Synthesizer.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADF4372 is part of the same family with ADF4371, the main difference
is that it has only 3 channels instead of 4, as the frequency quadrupler
is missing. As a result, the ADF4372 allows frequencies from 62.5 MHz to
16 GHz to be generated.
Datasheet:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch adds the buffered mode device tree property for positive and
negative inputs. Each option can be enabled independently.
In buffered mode, the input channel feeds into a high impedance input stage
of the buffer amplifier. Therefore, the input can tolerate significant
source impedances and is tailored for direct connection to external
resistive type sensors such as strain gages or RTDs.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch changes the channel configuration member of the device
structure from a fixed size array to a dynamic allocated one with a size
equal to the number of channels specified in the device tree. This will
ensure a more flexibility for compatible devices.
Ex. ad7124-4 - can have 4 differential or 8 pseudo-differential channels
ad7124-8 - can have 8 differential or 16 pseudo-differential channels
Also the device can suspport any other combination of differential and
pseudo-differential channels base on the physical number of inputs
available.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch adds the option to enable the buffered mode for positive and
negative inputs. Each option can be enabled independently.
In buffered mode, the input channel feeds into a high impedance input stage
of the buffer amplifier. Therefore, the input can tolerate significant
source impedances and is tailored for direct connection to external
resistive type sensors such as strain gages or RTDs.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The driver limits the user to use only 4/8 differential inputs, but this
device has the option to use pseudo-differential channels. This will
increase the number of channels to be equal with the number of inputs so 8
channels for ad7124-4 and 16 for ad7124-8.
This patch removes the check between channel nodes and num_inputs value.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change adds the ADIS driver library to the MAINTAINERS list, and adds
myself as the current maintainer of this library.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
All current ADIS162XX drivers have incorrect values defined via comments.
Also, when an error is reported the printed value is incorrect.
The functionality itself isn't affected, so it's not a critical issue.
And since the change is trivial, it was included in a single patch that
fixes these in one go. All values were correlated with the ones specified
in the data-sheets.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Change return values of function r8712_setrfreg_cmd from _SUCCESS/_FAIL
to 0/-ENOMEM respectively. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function r8712_setassocsta_cmd as it is only called by
mp_start_joinbss, which was removed in the previous patch.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function mp_start_joinbss.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function r8712_find_network as all it does is call
_r8712_find_network.
Rename _r8712_find_network to r8712_find_network for compatibility with
call sites.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function r8712_setrttbl_cmd.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function r8712_free_evt_priv as all it does is call
_free_evt_priv.
Rename _free_evt_priv to r8712_free_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_free_evt_priv from static to non-static to
match old definition.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function r8712_free_cmd_priv as all it does is call
_free_cmd_priv.
Change type of new r8712_free_cmd_priv from static to non-static to
match definition of original r8712_free_cmd_priv.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change return values of the function r8712_init_evt_priv from
_SUCCESS/_FAIL to 0/-ENOMEM. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function r8712_init_evt_priv as all it does is call
_init_evt_priv.
Rename _init_evt_priv to r8712_init_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_init_evt_priv from static to non-static as
original r8712_init_evt_priv was non-static.
Change return type of new r8712_init_evt_priv to int as original had
return type u32 but new (formerly _init_evt_priv) had return type sint.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change return values in r8712_init_cmd_priv from _SUCCESS/_FAIL to
0/-ENOMEM. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function block_resume as it was only called by
vchiq_arm_force_suspend, which was removed in a previous patch.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function output_timeout_error as it was only called by
vchiq_arm_force_suspend, which was deleted in a previous patch.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function vchiq_send_remote_release.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function vchiq_use_service_no_resume.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function vchiq_resume_internal.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function vchiq_pause_internal.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function vchiq_arm_force_suspend.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function vchiq_arm_allow_resume.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function vchiu_queue_is_full.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch errors:
- spaces required around that '=' (ctx:VxV)
- space required before the open parenthesis '('
- spaces preferred around that '-' (ctx:VxV)
- space required before the open brace '{'
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch "CHECK: spaces preferred around that '+' (ctx:VxV)".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function is_ap_in_wep() is not used in the driver code, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function get_bsstype() is not used in the driver code, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
to void
rtw_init_default_value() func always returns a value (u8)_SUCCESS.
Modified return type to void to resolve coccicheck warnings
of unneeded variable.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtw_suspend_wow() to void
Changed return type of function rtw_suspend_wow() to void.
The function always return _SUCCESS and the value is never
checked in the calling function.
Resolves coccicheck Unneeded variable "ret" warning.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtw_suspend_normal() to void
Coccicheck issues Unneeded variable "ret" warning.
The return value of function rtw_suspend_normal() is set to _SUCCESS.
The return value is never never checked by the calling function.
Modified return type to void to remove the coccicheck warning..
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtw_reset_drv_sw() to void.
The function rtw_reset_drv_sw() return value is set to _SUCCESS.
The return value is never checked when the function is called.
Modified the return value to void to remove "Unneeded Variable warning
of coccicheck.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function static uint loadparam(struct adapter *padapter, _nic_hdl
pnetdev) return type is modified to void.
The initial return value was always returning _SUCCESS and the return value
is never checked when the function is called.
This resolves coccicheck warnings of unneeded variables.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function hal_init_macaddr() just calls rtw_hal_set_hwreg().
Use rtw_hal_set_hwreg() directly and remove hal_init_macaddr().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup checkpatch issues in usb_halinit.c.
CHECK: Lines should not end with a '('
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Decompressor needs to know whether it's a partial
or full decompression since only full decompression
can be decompressed in-place.
On kirin980 platform, sequential read is finally
increased to 812MiB/s after decompression inplace
is enabled.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch integrates new decompression framework to
erofs decompression path, and remove the old
decompression implementation as well.
On kirin980 platform, sequential read is slightly
improved to 778MiB/s after the new decompression
backend is used.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
compressed data will be usually loaded into last pages of
the extent (the last page for 4k) for in-place decompression
(more specifically, in-place IO), as ilustration below,
start of compressed logical extent
| end of this logical extent
| |
______v___________________________v________
... | page 6 | page 7 | page 8 | page 9 | ...
|__________|__________|__________|__________|
. ^ . ^
. |compressed|
. | data |
. . .
|< dstsize >|<margin>|
oend iend
op ip
Therefore, it's possible to do decompression inplace (thus no
memcpy at all) if the margin is sufficient and safe enough [1],
and it can be implemented only for fixed-size output compression
compared with fixed-size input compression.
No memcpy for most of in-place IO (about 99% of enwik9) after
decompression inplace is implemented and sequential read will
be improved of course (see the following patches for test results).
[1] https://github.com/lz4/lz4/commit/b17f578a919b7e6b078cede2d52be29dd48c8e8c
https://github.com/lz4/lz4/commit/5997e139f53169fa3a1c1b4418d2452a90b01602
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a new generic decompression framework
in order to replace the old LZ4-specific decompression code.
Even though LZ4 is still the only supported algorithm, yet
it is more cleaner and easy to integrate new algorithm than
the old almost hard-coded decompression backend.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
stagingpages are behaved as bounce pages for temporary use.
Move to compress.h since the upcoming decompressor will
allocate stagingpages as well.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch moves per-CPU buffers to utils.c in order for
the upcoming generic decompression framework to use it.
Note that I tried to use generic per-CPU buffer or
per-CPU page approaches to clean up further, but obvious
performanace regression (about 2% for sequential read) was
observed.
Therefore let's leave it as it is instead, just move
to utils.c and I'll try to dig into the root cause later.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
