summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-15Merge tag 'socfpga_dts_for_v5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.1 - Add SMMU node for Stratix10 - Add vendor prefix fo Novtech - Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA - Add missing reset properties for all IP on Cyclone5 and Arria10 * tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: update more missing reset properties ARM: dts: socfpga: update missing reset property peripherals ARM: dts: Add support for 96Boards Chameleon96 board dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix arm64: dts: stratix10: Add Stratix10 SMMU support Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'hisi-arm64-dt-for-5.1v2' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into arm/dt ARM64: DT: Hisilicon SoCs DT updates for 5.1 * Hi6220 SoC and related boards: - Add DMA entries to enable DMA for Bluetooth transfers - Add power-on delay to make wifi stable - Revert HS200 mode to avoid eMMC controller resets and block read failures * Hi3660 SoC and related boards: - Fix SD card detection via setting cd-gpios correctly * Hi3798 SoC and related boards: - Fix malformed SPDX license identifier * tag 'hisi-arm64-dt-for-5.1v2' of git://github.com/hisilicon/linux-hisi: arm64: dts: hikey: Revert "Enable HS200 mode on eMMC" arm64: dts: hikey: Give wifi some time after power-on arm64: dts: hi3798cv200: fix malformed SPDX license identifier arm64: dts: hikey960: fix SDcard detection arm64: dts: hikey: Add DMA entries for Bluetooth UART Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'qcom-dts-for-5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm Device Tree Changes for v5.1 * Fixup GIC IRQ flags and GSBI state on MSM8660 * Add USB OTG, gpio ranges, and Wifi support on MSM8974 Hammerhead * Remove skeleton.dtsi on IPQ4019 * tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: ipq4019: Remove skeleton.dtsi ARM: dts: qcom: msm8974-hammerhead: add USB OTG support ARM: dts: qcom: msm8974: add gpio-ranges ARM: dts: qcom: msm8974-hammerhead: add WiFi support ARM: dts: msm8660: Fix up GIC IRQ flags ARM: dts: msm8660: Mark two GSBI blocks "disabled" Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'qcom-arm64-for-5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm ARM64 Updates for v5.1 * Add MSM8998 RPMCC, I2C, and USB related nodes * Add MSM8996 rpmpd node * Fix typo in MSM8996 pin definitions * Disable MSM8996 VFE smmu to fix security violation * Add I2C, SPI, rpmcc, uart, and WCN3990 wlan nodes on QCS404 * Enable SDCC1 HS400 support on QCS404 * Add a multitude of nodes on SDM845: SD, UFS, USB, LPASS, SCM, QSPI, PDC, DPU, videocc, GPU, RPMh bus interconnect, WCN3990 WLAN * Add gpio ranges to SDM845 TLMM * Fix regulator load on sdcard on MSM8998-mtp board * tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (41 commits) arm64: dts: sdm845: Add interconnect provider DT nodes arm64: dts: qcom: msm8996: Disabled VFE SMMU arm64: dts: qcom: qcs404: Add rpmcc node arm64: dts: qcom: msm8998: Add rpmcc node arm64: dts: qcom: msm8998: Add USB-related nodes arm64: dts: qcom: qcs404: Add QUP I2C and SPI nodes arm64: dts: qcom: qcs404: Define remaining UARTs arm64: dts: qcom: qcs404: Specify pinctrl state for UART arm64: dts: qcom: sdm845: Fix lpasscc reg arm64: dts: qcom: sdm845: Remove the duplicate header inclusion arm64: dts: qcom: sdm845: Add reserve-memory nodes arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node arm64: dts: qcom: sdm845: Extend ranges and describe DMA space arm64: dts: qcom: sdm845: Increase address and size cells for soc arm64: dts: sdm845: Add rpmh powercontroller node arm64: dts: msm8996: Add rpmpd device node arm64: dts: sdm845: Add WCN3990 WLAN module device node arm64: dts: qcom: sdm845: Add PDC Global reset driver node arm64: dts: qcom: sdm845: Add SCM DT node arm64: dts: qcom: sdm845: Fix pcs_misc region address for UNI PHY ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'lpc32xx-dt-for-5.1' of ↵Arnd Bergmann
https://github.com/vzapolskiy/linux-lpc32xx into arm/dt ARM: lpc32xx: devicetree updates for v5.1 Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx devicetree files: * added dts file for MYIR Tech MYD-LPC4357 development board, * two missing properties are added to LPC32xx keypad controller device tree node, this fixes a long-standing problem with its initialization, * LPC32xx PL11x LCD controller device node got corrected properties, which allows to use it with a new PL11x DRM driver, * output voltage level on one of Phytec phyCORE-LPC3250 fixed regulators is corrected, the fix is needed to remove duplicating platform data, * Phytec phyCORE-LPC3250 board gets a description of a kit LCD panel, this completes setup of CLCD device tree node for the board, * added unit addresses to memory device nodes on EA and Phytec boards, * fixes of ordinary warnings in dts formatting like leading zeroes, unused address and size cell properties and so on. * tag 'lpc32xx-dt-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx: ARM: dts: lpc32xx: ea3250: beautify gpio keys children nodes ARM: dts: lpc32xx: ea3250: add unit address to memory device node ARM: dts: lpc32xx: phy3250: add unit address to memory device node ARM: dts: lpc32xx: phy3250: setup LCD controller to panel interface ARM: dts: lpc32xx: phy3250: remove regulators umbrella device node ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant ARM: dts: lpc32xx: reparent keypad controller to SIC1 ARM: dts: lpc32xx: add required clocks property to keypad device node ARM: dts: Add DT for MYIR Tech MYD-LPC4357 Development Board ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation ARM: dts: lpc435x: remove address and size cells from gpio-keys-polled nodes Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'arm-soc/for-5.1/devicetree-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 5.1, please pull the following: - Stefan adds support for the Raspberry Pi 3 A+ by using the same mechanism of creating a symbolic reference to the ARM 32-bit DTS file * tag 'arm-soc/for-5.1/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Add reference to RPi 3 A+ ARM: dts: add Raspberry Pi 3 A+ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'arm-soc/for-5.1/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree updates for 5.1, please pull the following: - Dan relicenses the Luxul DTS files to GPL 2.0+/MIT - Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual BCM4366 radio - Stefan adds support for the Raspberry Pi A+: binding and DTS files. He also provides a bunch of DTC warning fixes for the different RPi DTS(i) files and adds support for missing GPIO lines on RPi 2/3 * tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl ARM: dts: bcm283x: Add missing GPIO line names ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LED ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplug ARM: dts: bcm2835: Fix labels for GPIO 0,1 ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cells ARM: dts: bcm283x: Fix DTC warning for memory node ARM: dts: add Raspberry Pi 3 A+ dt-bindings: bcm: Add Raspberry Pi 3 A+ ARM: dts: BCM5301X: Add basic DT for Phicomm K3 ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / MIT Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'samsung-dt-5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.1 1. Extend support for Aries family of mobile devices (e.g. Samsung Galaxy S) based on S5Pv210 SoC: DRM Rotator, FIMD, PWM vibrator, power off, touchscreen, Broadcom BCM4329 Bluetooth and cpufreq. 2. Remove hardcoded bootargs on Galaxy S family (proper support in U-Boot). 3. Fix minor DTC warnings. 4. Fix Exynos4412 Odroid X2/U3 conflicting eMMC GPIO settings and regulator properties. 5. Fix the eMMC RTSN pin breaking proper reboot on X2. * tag 'samsung-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3 ARM: dts: exynos: Fix eMMC regulator properties on Odroid U3 boards ARM: dts: exynos: Fix conflicting fixed-regulator GPIO flags and properties ARM: dts: s3c2416: Fix xti node's missing reg property warning ARM: dts: s5pv210: Fix onenand's unit address format warning ARM: dts: s5pv210: Add DMC nodes ARM: dts: s5pv210: Add support for more devices present on Aries ARM: dts: s5pv210: Add reserved memory for MFC on Aries ARM: dts: s5pv210: Remove hardcoded bootargs on Galaxy S and Fascinate 4G ARM: dts: s5pv210: Use correct fimd variant ARM: dts: s5pv210: Add node for exynos-rotator Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'stm32-dt-for-v5.1-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.1, round 1 Highlights: ---------- MPU part: -Enable Digital Thermal Sensor (dts) on stm32mp157c-ed1 (and so ev1). MCU part: -Add SPI support on stm32f429 SOC (4 SPIs instances). * tag 'stm32-dt-for-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Enable thermal sensor support on STM32MP157c-ed1 ARM: dts: stm32: add SPI support on STM32F429 SoC Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'v5.1-rockchip-dts64-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards are the Rock Pi 4, NanoPC-T4 and NanoPi-M4, with the last two being part of a family and sharing bigger parts of the devicetree. rk3328 got sound-related upgrades and a wider patch drops mmc display-wp fields from nodes which shouldn't use it. * tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: clean up the abuse of disable-wp arm64: dts: rockchip: 'Fix' nanopi4 uSD card detect arm64: dts: rockchip: Add NanoPC-T4 IR receiver arm64: dts: rockchip: Refine nanopi4 differences arm64: dts: rockchip: Add DT for NanoPi M4 arm64: dts: rockchip: add ROCK Pi 4 DTS support arm64: dts: rockchip: Add devicetree for NanoPC-T4 arm64: dts: rockchip: enable analog audio node for rock64 arm64: dts: rockchip: move rk3328 #sound-dai-cells to the soc dtsi arm64: dts: rockchip: add rk3328 ACODEC node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'v5.1-rockchip-dts32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New board the Elgin-R1 based on the rv1108 soc and a number of small improvements for rv1108 as well. RK3066 got support for the core display components and the Edison tablet got its touchscreen added. Apart from that a wider fix to drop display-wp usage from places where it shouldn't be used, a pin fix for Edison and a cleanup to prevent rk3036 board from defining sound-dai-cells for core components in each board separately. * tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: clean up the abuse of disable-wp ARM: dts: rv1108: Add support for rv1108-elgin-r1 board dt-bindings: Add vendor prefix for elgin ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups ARM: dts: rockchip: Add missing dma-names SPI support for rv1108 ARM: dts: rockchip: add rk3066 vop display nodes ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc ARM: dts: rockchip: fix cif1_pdn pin on rk3188-bqedison2qc ARM: dts: rockchip: add HCLK_HDMI to rk3066 vio power-domain ARM: dts: rockchip: move rk3036 i2s sound-dail-cells into soc dtsi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'am654-for-v5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt AM65x DT changes for v5.1. Includes: - EMMC support for am654-evm board * tag 'am654-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am654-base-board: Add eMMC Support arm64: dts: ti: k3-am654: Add Support for eMMC host controller Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'davinci-for-v5.1/dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt DaVinci device-tree updates for v5.1 contains a patch to enable analog mic input on da850 LCDK board. * tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Enable the analog mic input Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'omap-for-v5.1/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts updates for omap variants for v5.1 merge window This series contains board specific dts updates and few minor clean-up changes: - add stdout-path for am335x-chiliboard - add wlcore wakeirq for omap3-evm, pandaboard and omap4-droid4 - remove unnecessary address-cells and io-cells for am33xx - replace deprecated linux,wakeup with wakeup-source property - use spdx license for am335x-shc - configure ethernet pins for omap4-sdp * tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-sdp: Make ethernet working even if booted with latest u-boot ARM: dts: am335x-shc.dts: Switch to SPDX identifier ARM: dts: am437x: replace linux,wakeup with wakeup-source property ARM: dts: am33xx: Remove unnecessary properties ARM: dts: omap4-droid4: Configure wlcore wakeirq ARM: dts: Configure wlcore wakeirq for pandaboard ARM: dts: Add wlcore wakeirq for omap3-evm ARM: dts: am335x-chiliboard: Add stdout-path property Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'omap-for-v5.1/dt-ti-81xx-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts updates for ti81xx for v5.1 merge window Two changes to add support for McGill University's IceBoard telescope ARM + FPGA instrumentation board. This board is used for several telescopes around the world, see the related device tree commit for some interesting links for more information. Note that these changes are based on the related ti81xx soc changes. * tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874 ARM: dts: ti81xx: Add dts boilerplate for all GPIO and SPI peripherals Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'omap-for-v5.1/soc-ti-81xx-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt SoC updates for ti81xx for v5.1 merge window Two changes to add legacy hwmod data for gpio and spi peripherals on ti81xx. We have not yet updated ti81xx to probe devices with ti-sysc interconnect target module driver, so these changes are still needed to make devices usable for the related device tree changes. * tag 'omap-for-v5.1/soc-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: ti81xx: Add hwmod boilerplate for all GPIO and SPI peripherals ARM: ti81xx: Move I2C entries in omap_hwmod_81xx to maintain grouping Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-04arm64: dts: hikey: Revert "Enable HS200 mode on eMMC"Alistair Strachan
This reverts commit abd7d0972a192ee653efc7b151a6af69db58f2bb. This change was already partially reverted by John Stultz in commit 9c6d26df1fae ("arm64: dts: hikey: Fix eMMC corruption regression"). This change appears to cause controller resets and block read failures which prevents successful booting on some hikey boards. Cc: Ryan Grachek <ryan@edited.us> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: stable <stable@vger.kernel.org> #4.17+ Signed-off-by: Alistair Strachan <astrachan@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-02-04arm64: dts: hikey: Give wifi some time after power-onJan Kiszka
Somewhere along recent changes to power control of the wl1835, power-on became very unreliable on the hikey, failing like this: wl1271_sdio: probe of mmc2:0001:1 failed with error -16 wl1271_sdio: probe of mmc2:0001:2 failed with error -16 After playing with some dt parameters and comparing to other users of this chip, it turned out we need some power-on delay to make things stable again. In contrast to those other users which define 200 ms, the hikey would already be happy with 1 ms. Still, we use the safer 10 ms, like on the Ultra96. Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support") Cc: <stable@vger.kernel.org> #4.12+ Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-02-03ARM: dts: lpc32xx: ea3250: beautify gpio keys children nodesVladimir Zapolskiy
Regarding the 'gpio_keys' device node a dtc reports a couple of warnings: Warning (avoid_unnecessary_addr_size): /gpio_keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Warning (unit_address_vs_reg): /gpio_keys/button@21: node has a unit name, but no reg property The change fixes these issues and adds empty lines between adjacent children device nodes. The device node itself is renamed by substituting an underscore by hyphen to follow the standard naming convention of device tree nodes. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: ea3250: add unit address to memory device nodeVladimir Zapolskiy
The change adds a unit address to memory device node, the issue was reported as a unit_address_vs_reg warning by dtc. Root device node properties #address-cells and #size-cells were removed as inherited from lpc32xx.dtsi. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: phy3250: add unit address to memory device nodeVladimir Zapolskiy
The change adds a unit address to memory device node, the issue was reported as a unit_address_vs_reg warning by dtc. Root device node properties #address-cells and #size-cells were removed as inherited from lpc32xx.dtsi. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: phy3250: setup LCD controller to panel interfaceVladimir Zapolskiy
The change adds description of Sharp LQ035Q7DB03 3.5" 320x240 TFT panel, which is connected to Phytec phyCORE-LPC3250 board, ARM PrimeCell PL111 LCD controller on NXP LPC3250 SoC gets its configuration appropriately to support graphics output to the panel. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: phy3250: remove regulators umbrella device nodeVladimir Zapolskiy
The originally added 'regulators' device node has a number of flaws, to name a few its children has unit addresses but no reg properties, the regulators are not captured by a device driver due to a missing 'simple-bus' compatible, the regulator names are selected by killing either alphabetical order or device node grouping property. The change removes 'regulators' device node and renames the regulators and labels. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: phy3250: fix SD card regulator voltageVladimir Zapolskiy
The fixed voltage regulator on Phytec phyCORE-LPC3250 board, which supplies SD/MMC card's power, has a constant output voltage level of either 3.15V or 3.3V, the actual value depends on JP4 position, the power rail is referenced as VCC_SDIO in the board hardware manual. Fixes: d06670e96267 ("arm: dts: phy3250: add SD fixed regulator") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks propertyVladimir Zapolskiy
The originally added ARM PrimeCell PL111 clocks property misses the required "clcdclk" clock, which is the same as a clock to enable the LCD controller on NXP LPC3230 and NXP LPC3250 SoCs. Fixes: 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variantVladimir Zapolskiy
ARM PrimeCell PL111 LCD controller is found on On NXP LPC3230 and LPC3250 SoCs variants, the original reference in compatible property to an older one ARM PrimeCell PL110 is invalid. Fixes: e04920d9efcb3 ("ARM: LPC32xx: DTS files for device tree conversion") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: reparent keypad controller to SIC1Vladimir Zapolskiy
After switching to a new interrupt controller scheme by separating SIC1 and SIC2 from MIC interrupt controller just one SoC keypad controller was not taken into account, fix it now: WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:524 irq_domain_associate+0x50/0x1b0 error: hwirq 0x36 is too large for interrupt-controller@40008000 ... lpc32xx_keys 40050000.key: failed to get platform irq lpc32xx_keys: probe of 40050000.key failed with error -22 Fixes: 9b8ad3fb81ae ("ARM: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MIC") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: add required clocks property to keypad device nodeVladimir Zapolskiy
NXP LPC32xx keypad controller requires a clock property to be defined. The change fixes the driver initialization problem: lpc32xx_keys 40050000.key: failed to get clock lpc32xx_keys: probe of 40050000.key failed with error -2 Fixes: 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: Add DT for MYIR Tech MYD-LPC4357 Development BoardVladimir Zapolskiy
Add support for MYIR Tech MYD-LPC4357 Development Board and MY-LCD70TP-C 7" TFT LCD module with Innolux AT070TN82 panel. The board contains quite rich periferals, the list features NXP LPC4357 SoC, 32 MB SDRAM, 4 MB SPI Flash, audio input/output interface, LCD panel, micro SD card slot, USB, USB OTG, Ethernet, 2 CAN ports, 4 UARTs, I2C and SPI interfaces routed to external interface. More information can be found on http://www.myirtech.com/list.asp?id=422 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notationMathieu Malaterre
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> [vzapolskiy: fixed commit message to pass checkpatch.pl test] Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-02Merge tag 'tags/bcm2835-dt-64-next-2019-02-01' into devicetree-arm64/nextFlorian Fainelli
This pull request brings in the arm64 reference for Raspberry Pi 3 A+. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-02-01arm64: dts: sdm845: Add interconnect provider DT nodesDavid Dai
Add RSC (Resource State Coordinator) provider dictating network-on-chip interconnect bus performance found on SDM845-based platforms. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01arm64: dts: qcom: msm8996: Disabled VFE SMMUBjorn Andersson
Initializing the SMMU trips a security violation, so disable the VFE SMMU for now. Fixes: f3442ab97257 ("arm64: dts: qcom: msm8996: Add VFE SMMU node") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01arm64: dts: qcom: qcs404: Add rpmcc nodeBjorn Andersson
Add the rpm clock controller node, to provide the low-noise baseband clock for the USB PHYs, among other things. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01arm64: dts: qcom: msm8998: Add rpmcc nodeMarc Gonzalez
Add MSM8998 Resource Power Manager Clock Controller DT node. Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01arm64: dts: qcom: msm8998: Add USB-related nodesJeffrey Hugo
Add nodes for USB and related PHYs. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01arm64: dts: broadcom: Add reference to RPi 3 A+Stefan Wahren
This adds a reference to the dts of the Raspberry Pi 3 A+, so we don't need to maintain the content in arm64. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-02-01ARM: dts: add Raspberry Pi 3 A+Stefan Wahren
The Raspberry Pi 3 A+ is similar to the Pi 3 B+ but has only 512 MB RAM, 1 USB 2.0 port and no Ethernet. Compared to the Raspberry Pi 3 B it isn't possible to control BT_ON and WL_ON separately. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net>
2019-02-01Merge tag 'tags/bcm2835-dt-next-2019-02-01' into devicetree/nextFlorian Fainelli
This pull request adds support for the new Raspberry Pi 3 A+ and the missing GPIO labels for RPi 2/3. Additionally it contains some minor DT fixes. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-02-01ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrlStefan Wahren
There is no need to specify a pinctrl for the reset GPIO. So we better remove this avoid a potential conflict between pinctrl and pwrseq after the pinmux driver has been changed to strict: pinctrl-bcm2835 20200000.gpio: pin gpio41 already requested by wifi-pwrseq; cannot claim for pinctrl-bcm2835:499 pinctrl-bcm2835 20200000.gpio: pin-41 (pinctrl-bcm2835:499) status -22 pwrseq_simple: probe of wifi-pwrseq failed with error -22 Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-02-01ARM: dts: bcm283x: Add missing GPIO line namesStefan Wahren
The GPIO sysfs is deprecated and disabled in the defconfig files. So in order to motivate the usage of the new GPIO character device API add the missing GPIO line names for Raspberry Pi 2 and 3. In the lack of full schematics i would leave all undocumented pins as unnamed. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-02-01ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LEDStefan Wahren
The RPI 3 B+ provides control to both LEDs (PWR and ACT). So append the first letter of the LED color (like in the schematics) in order to clarify this. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-02-01ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplugStefan Wahren
This make the GPIO label for HDMI hotplug more consistent to the other boards. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-02-01ARM: dts: bcm2835: Fix labels for GPIO 0,1Stefan Wahren
According to the schematics for all RPis with a 40 pin header, the GPIOs 0 and 1 are labeled as ID_SD and ID_SC. In order to clarify that is a I2C bus, append the third letter. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-02-01ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cellsStefan Wahren
Compiling the bcm2835-rpi.dtsi with W=1 leads to the following warning: Warning (avoid_unnecessary_addr_size): /soc/firmware: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Fix this by removing these unnecessary properties. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-02-01ARM: dts: bcm283x: Fix DTC warning for memory nodeStefan Wahren
Compiling the bcm283x DTS with W=1 leads to the following warning: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Fix this by adding the unit address. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-02-01ARM: dts: add Raspberry Pi 3 A+Stefan Wahren
The Raspberry Pi 3 A+ is similar to the Pi 3 B+ but has only 512 MB RAM, 1 USB 2.0 port and no Ethernet. Compared to the Raspberry Pi 3 B it isn't possible to control BT_ON and WL_ON separately. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net>
2019-02-01dt-bindings: bcm: Add Raspberry Pi 3 A+Stefan Wahren
This adds the root properties for the Raspberry Pi 3 A+ . Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Rob Herring <robh@kernel.org>
2019-02-01ARM: dts: stm32: Enable thermal sensor support on STM32MP157c-ed1David Hernandez Sanchez
Enable STM32 Digital Thermal Sensor (dts) driver for STM32MP157c-ed1 board. Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-02-01ARM: dts: stm32: add SPI support on STM32F429 SoCCezary Gapinski
This patch adds all SPI instances of the STM32F429 SoC. Signed-off-by: Cezary Gapinski <cezary.gapinski@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
generated by cgit (git 2.34.1) at 2025-07-16 08:26:25 +0000