summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-12sh-pfc: r8a7790: add HSCIF pin groupsUlrich Hecht
Adds HSCIF data/clk/ctrl groups to R8A7790 PFC driver. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12pinctrl: r8a73a4: add pinmux data for MMCIF and SDHI interfacesGuennadi Liakhovetski
This patch adds pinmux groups and functions for the two MMCIF and three SDHI interfaces on r8a73a4 (APE6). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: marzen: Use RCAR_GP_PIN macroLaurent Pinchart
Replace hardcoded pin numbers with the RCAR_GP_PIN macro to make the code match the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: lager: Initialize pinmuxLaurent Pinchart
Initialize r8a7790 pinmuxing and register mappings for the two debug serial ports. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: bockw: add pinctrl supportKuninori Morimoto
SCIF0 support as 1st step Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g: tidyup FSI pinctrlKuninori Morimoto
sh73a0 needs "sh_fsi2", not "sh_fsi2.0" Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740 pinmux platform device cleanupMagnus Damm
Use DEFINE_RES_MEM() and platform_device_register_simple() to save a couple of lines of code. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTHSimon Horman
"gpio-rcar: Support IRQ_TYPE_EDGE_BOTH" adds support to the R-Car GPIO driver for IRQ_TYPE_EDGE_BOTH. As hardware support for this feature is not universal for all SoCs a flag, has_both_edge_trigger, has been added to the platform data of the driver to allow this feature to be enabled. As the r8a7790 SoC hardware supports this feature enable it. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05pinctrl: sh-pfc: r8a7779: Fix missing MOD_SEL2 entryPhil Edworthy
The list of functions selected by the MOD_SEL2 register was missing an entry. This caused all entries after this to modify the MOD_SEL2 register incorrectly. This bug showed up when selecting i2c2_c pins on the Renesas Hurricane board. This bug has been present since pinmux support was added for the r8a7779 SoC by 881023d28b465eb457067dc8bbca0f24d8b34279 ("sh-pfc: Add r8a7779 pinmux support") in v3.8-rc4. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05Revert "ARM: shmobile: Disallow PINCTRL without GPIOLIB"Laurent Pinchart
GPIOLIB dependency handling was added to the PINCTRL core by commit 2afe8229687ec24cbc07e78449a588bb8b68f858 Author: Haojian Zhuang <haojian.zhuang@linaro.org> Date: Thu Mar 28 07:34:19 2013 +0800 pinctrl: core: add dependence of GPIOLIB There is not need to handle that dependency at the SH Mobile level anymore. Revert commit 6722f6cb763203cab775297b6e9d00834af0d6d7 Author: Magnus Damm <damm@opensource.se> Date: Mon Mar 18 22:58:18 2013 +0900 ARM: shmobile: Disallow PINCTRL without GPIOLIB Modify mach-shmobile to only select PINCTRL in case of ARCH_WANT_OPTIONAL_GPIOLIB is set. This fixes a build error triggered when adding a new SoC lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n): Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05pinctrl: r8a7790: add pinmux data for MMCIF and SDHI interfacesGuennadi Liakhovetski
This patch adds pinmux groups and functions for the two MMCIF and four SDHI interfaces on r8a73a4 (APE6). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add MMCIF pin groupsKuninori Morimoto
Add MMCIF CLK/CMD/DATA groups to R8A7778 PFC driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add HSPI pin groupsKuninori Morimoto
Add HSPI CLK/CS/RX/TX pin groups to R8A7778 PFC driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add I2C pin groupsKuninori Morimoto
Add I2C SDA/SCL pin groups to R8A7778 PFC driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05pinctrl: sh-pfc: fix a typo in pfc-r8a7790Guennadi Liakhovetski
Fix multiple occurrences of the "RESEVED" typo. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05pinctrl: sh-pfc: fix r8a7790 Function Select register tablesGuennadi Liakhovetski
Fix several errors in Peripheral Function Select register tables for r8a7790, which prevent various function pins from being correctly configured. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: fixup IRQ1A settingsKuninori Morimoto
IP2[31] func2 is IRQ1A, not IRQ3A Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7779: add Ether pin groupsSergei Shtylyov
Add Ether RMII/LINK/MAGIC pin groups to R8A7779 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add Ether pin groupsSergei Shtylyov
Add Ether RMII/LINK/MAGIC pin groups to R8A7778 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add VIN pin groupsVladimir Barinov
Add VIN DATA[0:8]/CLK/HSYNC/VSYNC pin groups to R8A7778 PFC driver. While at it, add SH_PFC_MUX8() macro for 8-bit data busses. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> [Sergei: updated the copyrights, added SH_PFC_MUX8() macro for 8-bit data bus, made use of SH_PFC_*() macros to define the pin groups.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: sh73a0: Remove function GPIOsLaurent Pinchart
No sh73a0 platform use the function GPIOs API. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7790: Add TPU pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Add TPU pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: sh73a0: Add TPU pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add USB pin groupsSergei Shtylyov
Add USB0/1 PENC/USB_OVC pin groups to R8A7778 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g-reference: Remove the VCCQ MC0 function GPIOLaurent Pinchart
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g: Remove the VCCQ MC0 function GPIOLaurent Pinchart
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: sh73a0: Add VCCQ MC0 regulatorLaurent Pinchart
The sh73a0 has an internal power gate on the VCCQ power supply for the SDHI0 device that is controlled (for some strange reason) by a bit in a PFC register. This feature should be exposed as a regulator. As the same register is also used for pin control purposes there is no way to achieve atomic read/write sequences with a separate regulator driver. We thus need to implement the regulator here. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: Add support for SoC-specific initializationLaurent Pinchart
Add two optional init and exit SoC operations and call them from the core at probe and remove time. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7779 pinmux platform device cleanupMagnus Damm
Use DEFINE_RES_MEM() to save a couple of lines of code. Signed-off-by: Magnus Damm <damm@opensource.se> [lp: Don't declare r8a7779_pfc_resources as const] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Register GPIO devicesLaurent Pinchart
Move GPIOs handling from the PFC device to separate GPIO devices. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7778: add GPIO supportKuninori Morimoto
This patch was tested on Bock-W board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: tidyup SDHI naming suffixes and sort it alphabeticallyKuninori Morimoto
SDHI 1/2 are the target Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: Fix outdated GPIO_FN commentsLaurent Pinchart
Function GPIOs have been removed, remove comments that refer to them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Add bias (pull-up/down) pinconf supportLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Replace GPIO_PORTx enum with GPIO port numbersLaurent Pinchart
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Remove function GPIOsLaurent Pinchart
No r8a7740 platform use the function GPIOs API. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove HDMI function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove FSI function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove CEU function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove GETHER function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove BSC function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove INTC function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove SCIF function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: armadillo800eva: Convert SCIFA1 to pinctrlBastian Hecht
We use the new pinctrl framework now. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove HDMI function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the HDMI pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove FSI function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the FSI pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04sh-pfc: r8a7740: Remove CEU function GPIOSLaurent Pinchart
All r8a7740 platforms now use the pinctrl API to control the CEU pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-07-15 09:58:33 +0000