| Age | Commit message (Collapse) | Author |
|---|
|
Now that we are retiring the IPT action.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts. Buh-bye.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev->gso_partial_features is read from tx fast path for GSO packets.
Move it to appropriate section to avoid a cache line miss.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to have an intermediate functions as DEFINE_RES_*()
macros are represented by compound literals. Just use them in place.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a 'DEL_CLIENT' message is received from the remote, the corresponding
server port gets deleted. A DEL_SERVER message is then announced for this
server. As part of handling the subsequent DEL_SERVER message, the name-
server attempts to delete the server port which results in a '-ENOENT' error.
The return value from server_del() is then propagated back to qrtr_ns_worker,
causing excessive error prints.
To address this, return 0 from control_cmd_del_server() without checking the
return value of server_del(), since the above scenario is not an error case
and hence server_del() doesn't have any other error return value.
Signed-off-by: Sarannya Sasikumar <quic_sarannya@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Maxime Chevallier says:
====================
Introduce PHY listing and link_topology tracking
Here's a V5 of the multi-PHY support series.
At a glance, besides some minor fixes and R'd-by from Andrew, one of the
thing this series does is remove the ASSERT_RTNL() from the
topo_add_phy/del_phy operations.
These operations will take a PHY device and put it into the list of
devices associated to a netdevice. The main thing to protect here is the
list itself, but since we use xarrays, my naive understanding of it is
that it contains its own protection scheme. There shouldn't be a need
for more locking, as the insertion/deletion paths are already hooked
into the PHY connection to a netdev, or disconnection from it.
Now for the rest of the cover :
As a remainder, this ongoing work aims ultimately at supporting complex
link topologies that involve multiplexing multiple PHYs/SFPs on a single
netdevice. As a first step, it's required that we are able to enumerate the
PHYs on a given ethernet interface.
By just doing so, we also improve already-existing use-cases, namely the
copper SFP modules support when a media-converter is used (as we have 2
PHYs on the link, but only one is referenced by net_device.phydev, which
is used on a variety of netlink commands).
The series is architectured as follows :
- The first patch adds the notion of phy_link_topology, which tracks
all PHYs attached to a netdevice.
- Patches 2, 3 and 4 adds some plumbing into SFP and phylib to be able
to connect the dots when building the topology tree, to know which PHY
is connected to which SFP bus, trying not to be too invasive on phylib.
- Patch 5 allows passing a PHY_INDEX to ethnl commands. I'm uncertain about
this, as there are at least 4 netlink commands ( 5 with the one introduced
in patch 7 ) that targets PHYs directly or indirectly, which to me makes
it worth-it to have a generic way to pass a PHY index to commands, however
the approach taken may be too generic.
- Patch 6 is the netlink spec update + ethtool-user.c|h autogenerated code
update (the autogenerated code triggers checkpatch warning though)
- Patch 7 introduces a new netlink command set to list PHYs on a netdevice.
It implements a custom DUMP and GET operation to allow filtered dumps,
that lists all PHYs on a given netdevice. I couldn't use most of ethnl's
plumbing though.
- Patch 8 is the netlink spec update + ethtool-user.c|h update for that
new command
- Patch 8,9,10 and 11 updates the PLCA, strset, cable-test and pse netlink
commands to use the user-provided PHY instead of net_device.phydev.
- Finally patch 12 adds some documentation for this whole work.
Examples
========
Here's a short overview of the kind of operations you can have regarding
the PHY topology. These tests were performed on a MacchiatoBin, which
has 3 interfaces :
eth0 and eth1 have the following layout:
MAC - PHY - SFP
eth2 has this more classic topology :
MAC - PHY - RJ45
finally eth3 has the following topology :
MAC - SFP
When performing a dump with all interfaces down, we don't get any
result, as no PHY has been attached to their respective net_device :
None
The following output is with eth0, eth2 and eth3 up, but no SFP module
inserted in none of the interfaces :
[{'downstream-sfp-name': 'sfp-eth0',
'drvname': 'mv88x3310',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 0,
'index': 1,
'name': 'f212a600.mdio-mii:00',
'upstream-type': 'mac'},
{'drvname': 'Marvell 88E1510',
'header': {'dev-index': 4, 'dev-name': 'eth2'},
'id': 21040593,
'index': 1,
'name': 'f212a200.mdio-mii:00',
'upstream-type': 'mac'}]
And now is a dump operation with a copper SFP in the eth0 port :
[{'downstream-sfp-name': 'sfp-eth0',
'drvname': 'mv88x3310',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 0,
'index': 1,
'name': 'f212a600.mdio-mii:00',
'upstream-type': 'mac'},
{'drvname': 'Marvell 88E1111',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 21040322,
'index': 2,
'name': 'i2c:sfp-eth0:16',
'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'},
'upstream-type': 'phy'},
{'drvname': 'Marvell 88E1510',
'header': {'dev-index': 4, 'dev-name': 'eth2'},
'id': 21040593,
'index': 1,
'name': 'f212a200.mdio-mii:00',
'upstream-type': 'mac'}]
-- Note that this shouldn't actually work as the 88x3310 PHY doesn't allow
a 1G SFP to be connected to its SFP interface, and I don't have a 10G copper SFP,
so for the sake of the demo I applied the following modification, which
of courses gives a non-functionnal link, but the PHY attach still works,
which is what I want to demonstrate :
@@ -488,7 +488,7 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
if (iface != PHY_INTERFACE_MODE_10GBASER) {
dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
- return -EINVAL;
+ //return -EINVAL;
}
return 0;
}
Finally an example of the filtered DUMP operation that Jakub suggested
in V1 :
[{'downstream-sfp-name': 'sfp-eth0',
'drvname': 'mv88x3310',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 0,
'index': 1,
'name': 'f212a600.mdio-mii:00',
'upstream-type': 'mac'},
{'drvname': 'Marvell 88E1111',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 21040322,
'index': 2,
'name': 'i2c:sfp-eth0:16',
'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'},
'upstream-type': 'phy'}]
And a classic GET operation allows querying a single PHY's info :
{'drvname': 'Marvell 88E1111',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 21040322,
'index': 2,
'name': 'i2c:sfp-eth0:16',
'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'},
'upstream-type': 'phy'}
Changed in V5:
- Removed the RTNL assertion in the topology ops
- Made the phy_topo_get_phy inline
- Fixed the PSE-PD multi-PHY support by re-adding a wrongly dropped
check
- Fixed some typos in the documentation
- Fixed reverse xmas trees
Changes in V4:
- Dropped the RFC flag
- Made the net_device integration independent to having phylib enabled
- Removed the autogenerated ethtool-user code for the YNL specs
Changes in V3:
- Added RTNL assertions where needed
- Fixed issues in the DUMP code for PHY_GET, which crashed when running it
twice in a row
- Added the documentation, and moved in-source docs around
- renamed link_topology to phy_link_topology
Changes in V2:
- Added the DUMP operation
- Added much more information in the reported data, to be able to reconstruct
precisely the topology tree
- renamed phy_list to link_topology
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The newly introduced phy_link_topology tracks all ethernet PHYs that are
attached to a netdevice. Document the base principle, internal and
external APIs. As the phy_link_topology is expected to be extended, this
documentation will hold any further improvements and additions made
relative to topology handling.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer
from the ethnl request to allow query phy stats from each PHY on the
link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PHY_GET command, supporting both DUMP and GET operations, is used to
retrieve the list of PHYs connected to a netdevice, and get topology
information to know where exactly it sits on the physical link.
Add the netlink specs corresponding to that command.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the spec to take the newly introduced phy-index as a generic
request parameter.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Knowing the bus name is helpful when we want to expose the link topology
to userspace, add a helper to return the SFP bus name.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.
By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add checks to all the VFS paths for "are we in a RO snapshot?".
Note - we don't check this when setting inode options via our xattr
interface, since those generally only affect data placement, not
contents of data.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: "Carl E. Thompson" <list-bcachefs@carlthompson.net>
|
|
Add a new superblock section that contains a list of
{ minor version, recovery passes, errors_to_fix }
that is - a list of recovery passes that must be run when downgrading
past a given version, and a list of errors to silently fix.
The upcoming disk accounting rewrite is not going to be fully
compatible: we're going to have to regenerate accounting both when
upgrading to the new version, and also from downgrading from the new
version, since the new method of doing disk space accounting is a
completely different architecture based on deltas, and synchronizing
them for every jounal entry write to maintain compatibility is going to
be too expensive and impractical.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add two new superblock fields. Since the main section of the superblock
is now fully, we have to add a new variable length section for them -
bch_sb_field_ext.
- recovery_passes_requried: recovery passes that must be run on the
next mount
- errors_silent: errors that will be silently fixed
These are to improve upgrading and dwongrading: these fields won't be
cleared until after recovery successfully completes, so there won't be
any issues with crashing partway through an upgrade or a downgrade.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The next patch will start to refer to recovery passes from the
superblock; naturally, we now need identifiers that don't change, since
the existing enum is in the order in which they are run and is not
fixed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
similar to prt_bitflags(), but for ulong arrays
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we need BCH_SB_ERR_MAX in bcachefs.h
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BCH_REPLICAS_MAX isn't the actual maximum number of pointers in an
extent, it's the maximum number of dirty pointers.
We don't have a real restriction on the number of cached pointers, and
we don't want a fixed size array here anyways - so switch to
DARRAY_PREALLOCATED().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-and-tested-by: Daniel J Blueman <daniel@quora.org>
|
|
Add support to darray for preallocating some number of elements.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We sometimes use darrays for quite large buffers - the btree write
buffer in particular needs large buffers, since it must be sized to hold
all the write buffer keys outstanding in the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Move the slowpath (actually growing the darray) to an out-of-line
function; also, add some helpers for the upcoming btree write buffer
rewrite.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a superblock write hasn't happened (i.e. we never had to go rw), then
c->sb.version will be out of date w.r.t. c->disk_sb.sb->version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
turns out iterate_iovec() mutates __iov, we need to save our own copy
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: Marcin Mirosław <marcin@mejor.pl>
|
|
peek_upto() checks against the end position and bails out before
FILTER_SNAPSHOTS checks; this is because if we end up at a different
inode number than the original search key none of the keys we see might
be visibile in the current snapshot - we might be looking at inode in a
completely different subvolume.
But this is broken, because when we're iterating over extents we're
checking against the extent start position to decide when to bail out,
and the extent start position isn't monotonically increasing until after
we've run FILTER_SNAPSHOTS.
Fix this by adding a simple inode number check where the old bailout
check was, and moving the main check to the correct position.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: "Carl E. Thompson" <list-bcachefs@carlthompson.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
netfilter pull request 23-12-22
The following patchset contains Netfilter updates for net-next:
1) Add locking for NFT_MSG_GETSETELEM_RESET requests, to address a
race scenario with two concurrent processes running a dump-and-reset
which exposes negative counters to userspace, from Phil Sutter.
2) Use GFP_KERNEL in pipapo GC, from Florian Westphal.
3) Reorder nf_flowtable struct members, place the read-mostly parts
accessed by the datapath first. From Florian Westphal.
4) Set on dead flag for NFT_MSG_NEWSET in abort path,
from Florian Westphal.
5) Support filtering zone in ctnetlink, from Felix Huettner.
6) Bail out if user tries to redefine an existing chain with different
type in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I am stepping down as TJA11XX C45 maintainer.
Andrei Botila will take the responsibility to maintain and improve the
support for TJA11XX C45 PHYs.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some r8168 NICs stop working upon system resume:
[ 688.051096] r8169 0000:02:00.1 enp2s0f1: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000).
[ 688.175131] r8169 0000:02:00.1 enp2s0f1: Link is Down
...
[ 691.534611] r8169 0000:02:00.1 enp2s0f1: PCI error (cmd = 0x0407, status_errs = 0x0000)
Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)
Trial and error shows that increase the loop wait on
rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let
rtl8168ep_driver_start() to wait a bit longer.
Fixes: e6d6ca6e1204 ("r8169: Add support for another RTL8168FP")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The freeing and re-allocation of algorithm are protected by cpool_mutex,
so it doesn't fix an actual use-after-free, but avoids a deserved
refcount_warn_saturate() warning.
A trivial fix for the racy behavior.
Fixes: 8c73b26315aa ("net/tcp: Prepare tcp_md5sig_pool for TCP-AO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
m->data needs to be freed when em_text_destroy is called.
Fixes: d675c989ed2d ("[PKT_SCHED]: Packet classification based on textsearch (ematch)")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The __of_mdiobus_register() function was storing the device node in
dev.of_node without increasing its reference count. It implicitly relied
on the caller to maintain the allocated node until the mdiobus was
unregistered.
Now, __of_mdiobus_register() will acquire the node before assigning it,
and of_mdiobus_unregister_callback() will be called at the end of
mdio_unregister().
Drivers can now release the node immediately after MDIO registration.
Some of them are already doing that even before this patch.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
When parsing emails from .yaml files in particular, stray punctuation
such as a leading '-' can end up in the name. For example, consider a
common YAML section such as:
maintainers:
- devicetree@vger.kernel.org
This would previously be processed by get_maintainer.pl as:
- <devicetree@vger.kernel.org>
Make the logic in clean_file_emails more robust by deleting any
sub-names which consist of common single punctuation marks before
proceeding to the best-effort name extraction logic. The output is then
correct:
devicetree@vger.kernel.org
Some additional comments are added to the function to make things
clearer to future readers.
Link: https://lore.kernel.org/all/0173e76a36b3a9b4e7f324dd3a36fd4a9757f302.camel@perches.com/
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While the script correctly extracts UTF-8 encoded names from the
MAINTAINERS file, the regular expressions damage my name when parsing
from .yaml files. Fix this by replacing the Latin-1-compatible regular
expressions with the unicode property matcher \p{L}, which matches on
any letter according to the Unicode General Category of letters.
The proposed solution only works if the script uses proper string
encoding from the outset, so instruct Perl to unconditionally open all
files with UTF-8 encoding. This should be safe, as the entire source
tree is either UTF-8 or ASCII encoded anyway. See [1] for a detailed
analysis.
Furthermore, to prevent the \w expression from matching non-ASCII when
checking for whether a name should be escaped with quotes, add the /a
flag to the regular expression. The escaping logic was duplicated in
two places, so it has been factored out into its own function.
The original issue was also identified on the tools mailing list [2].
This should solve the observed side effects there as well.
Link: https://lore.kernel.org/all/dzn6uco4c45oaa3ia4u37uo5mlt33obecv7gghj2l756fr4hdh@mt3cprft3tmq/ [1]
Link: https://lore.kernel.org/tools/20230726-gush-slouching-a5cd41@meerkat/ [2]
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix readers that are blocked on the ring buffer when buffer_percent
is 100%. They are supposed to wake up when the buffer is full, but
because the sub-buffer that the writer is on is never considered
"dirty" in the calculation, dirty pages will never equal nr_pages.
Add +1 to the dirty count in order to count for the sub-buffer that
the writer is on.
- When a reader is blocked on the "snapshot_raw" file, it is to be
woken up when a snapshot is done and be able to read the snapshot
buffer. But because the snapshot swaps the buffers (the main one with
the snapshot one), and the snapshot reader is waiting on the old
snapshot buffer, it was not woken up (because it is now on the main
buffer after the swap). Worse yet, when it reads the buffer after a
snapshot, it's not reading the snapshot buffer, it's reading the live
active main buffer.
Fix this by forcing a wakeup of all readers on the snapshot buffer
when a new snapshot happens, and then update the buffer that the
reader is reading to be back on the snapshot buffer.
- Fix the modification of the direct_function hash. There was a race
when new functions were added to the direct_function hash as when it
moved function entries from the old hash to the new one, a direct
function trace could be hit and not see its entry.
This is fixed by allocating the new hash, copy all the old entries
onto it as well as the new entries, and then use rcu_assign_pointer()
to update the new direct_function hash with it.
This also fixes a memory leak in that code.
- Fix eventfs ownership
* tag 'trace-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix modification of direct_function hash while in use
tracing: Fix blocked reader of snapshot buffer
ring-buffer: Fix wake ups when buffer_percent is set to 100
eventfs: Fix file and directory uid and gid ownership
|
|
Directly return NULL or 'next' instead of breaking out of the loop.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Split original patch into two independent parts - Linus ]
Link: https://lore.kernel.org/lkml/7c8828aec72e42eeb841ca0ee3397e9a@AcuMS.aculab.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
osq_wait_next() is passed 'prev' from osq_lock() and NULL from
osq_unlock() but only needs the 'cpu' value to write to lock->tail.
Just pass prev->cpu or OSQ_UNLOCKED_VAL instead.
Should have no effect on the generated code since gcc manages to assume
that 'prev != NULL' due to an earlier dereference.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Changed 'old' to 'old_cpu' by request from Waiman Long - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Masami Hiramatsu reported a memory leak in register_ftrace_direct() where
if the number of new entries are added is large enough to cause two
allocations in the loop:
for (i = 0; i < size; i++) {
hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
new = ftrace_add_rec_direct(entry->ip, addr, &free_hash);
if (!new)
goto out_remove;
entry->direct = addr;
}
}
Where ftrace_add_rec_direct() has:
if (ftrace_hash_empty(direct_functions) ||
direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
struct ftrace_hash *new_hash;
int size = ftrace_hash_empty(direct_functions) ? 0 :
direct_functions->count + 1;
if (size < 32)
size = 32;
new_hash = dup_hash(direct_functions, size);
if (!new_hash)
return NULL;
*free_hash = direct_functions;
direct_functions = new_hash;
}
The "*free_hash = direct_functions;" can happen twice, losing the previous
allocation of direct_functions.
But this also exposed a more serious bug.
The modification of direct_functions above is not safe. As
direct_functions can be referenced at any time to find what direct caller
it should call, the time between:
new_hash = dup_hash(direct_functions, size);
and
direct_functions = new_hash;
can have a race with another CPU (or even this one if it gets interrupted),
and the entries being moved to the new hash are not referenced.
That's because the "dup_hash()" is really misnamed and is really a
"move_hash()". It moves the entries from the old hash to the new one.
Now even if that was changed, this code is not proper as direct_functions
should not be updated until the end. That is the best way to handle
function reference changes, and is the way other parts of ftrace handles
this.
The following is done:
1. Change add_hash_entry() to return the entry it created and inserted
into the hash, and not just return success or not.
2. Replace ftrace_add_rec_direct() with add_hash_entry(), and remove
the former.
3. Allocate a "new_hash" at the start that is made for holding both the
new hash entries as well as the existing entries in direct_functions.
4. Copy (not move) the direct_function entries over to the new_hash.
5. Copy the entries of the added hash to the new_hash.
6. If everything succeeds, then use rcu_pointer_assign() to update the
direct_functions with the new_hash.
This simplifies the code and fixes both the memory leak as well as the
race condition mentioned above.
Link: https://lore.kernel.org/all/170368070504.42064.8960569647118388081.stgit@devnote2/
Link: https://lore.kernel.org/linux-trace-kernel/20231229115134.08dd5174@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 763e34e74bb7d ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the
ALC287 codec.
The mute led can be enabled using the already existing
ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on an HP Pavilion ec1003AU
Signed-off-by: Aabish Malik <aabishmalik3337@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231229170352.742261-3-aabishmalik3337@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Under heavy traffic, the BlueField Gigabit interface can
become unresponsive. This is due to a possible race condition
in the mlxbf_gige_rx_packet function, where the function exits
with producer and consumer indices equal but there are remaining
packet(s) to be processed. In order to prevent this situation,
read receive consumer index *before* the HW replenish so that
the mlxbf_gige_rx_packet function returns an accurate return
value even if a packet is received into just-replenished buffer
prior to exiting this routine. If the just-replenished buffer
is received and occupies the last RX ring entry, the interface
would not recover and instead would encounter RX packet drops
related to internal buffer shortages since the driver RX logic
is not being triggered to drain the RX ring. This patch will
address and prevent this "ring full" condition.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-12-20
mlx5 Socket direct support and management PF profile.
Tariq Says:
===========
Support Socket-Direct multi-dev netdev
This series adds support for combining multiple devices (PFs) of the
same port under one netdev instance. Passing traffic through different
devices belonging to different NUMA sockets saves cross-numa traffic and
allows apps running on the same netdev from different numas to still
feel a sense of proximity to the device and achieve improved
performance.
We achieve this by grouping PFs together, and creating the netdev only
once all group members are probed. Symmetrically, we destroy the netdev
once any of the PFs is removed.
The channels are distributed between all devices, a proper configuration
would utilize the correct close numa when working on a certain app/cpu.
We pick one device to be a primary (leader), and it fills a special
role. The other devices (secondaries) are disconnected from the network
in the chip level (set to silent mode). All RX/TX traffic is steered
through the primary to/from the secondaries.
Currently, we limit the support to PFs only, and up to two devices
(sockets).
===========
Armen Says:
===========
Management PF support and module integration
This patch rolls out comprehensive support for the Management Physical
Function (MGMT PF) within the mlx5 driver. It involves updating the
mlx5 interface header to introduce necessary definitions for MGMT PF
and adding a new management PF netdev profile, which will allow the host
side to communicate with the embedded linux on Blue-field devices.
===========
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
