summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-22can: kvaser_pciefd: Use TX FIFO size read from CAN controllerJimmy Assarsson
Use the TX FIFO size read from CAN controller register, instead of using hard coded value. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-15-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Refactor codeJimmy Assarsson
Refactor code; - Format code - Rename variables and macros - Remove intermediate variables - Add/remove blank lines - Reduce scope of variables - Add helper functions Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-14-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Add len8_dlc supportJimmy Assarsson
Add support for the Classical CAN raw DLC functionality to send and receive DLC values from 9 .. 15. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-13-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Use FIELD_{GET,PREP} and GENMASK where appropriateJimmy Assarsson
Replace opencoded masking and shifting, with GENMASK, FIELD_GET and FIELD_PREP macros. Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-12-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Sort register definitionsJimmy Assarsson
Sort the registers defines, in the same order as the register bits/fields are defined. Sort register bits/fields in MSB-to-LSB order. Update and add comments. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-11-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Change return type for ↵Jimmy Assarsson
kvaser_pciefd_{receive,transmit,set_tx}_irq() Change return type to void for kvaser_pciefd_transmit_irq(), kvaser_pciefd_receive_irq() and kvaser_pciefd_set_tx_irq(). These functions always return zero. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-10-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Rename device ID definesJimmy Assarsson
Rename device ID defines to better match the product name of the supported device. Use 16 bit hexadecimal values for device IDs. And format kvaser_pciefd_id_table using clang-format. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-9-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Sort includes in alphabetic orderJimmy Assarsson
Sort the includes in alphabetic order. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-8-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove SPI flash parameter read functionalityJimmy Assarsson
Remove SPI flash parameter read functionality, since it's only used for reading the interface CAN controller count. This information is already read from a register, making the information redundant. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: uapi: move CAN_RAW_FILTER_MAX definition to raw.hOliver Hartkopp
CAN_RAW_FILTER_MAX is only relevant for CAN_RAW sockets and used in linux/can/raw.c or in userspace applications that include the raw.h file anyway. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230609121051.9631-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Define unsigned constants with type suffix 'U'Jimmy Assarsson
Define unsigned constants with type suffix 'U' Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Set hardware timestamp on transmitted packetsJimmy Assarsson
Set hardware timestamp on transmitted packets. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Add function to set skb hwtstampsJimmy Assarsson
Add new function, kvaser_pciefd_set_skb_timestamp(), to set skb hwtstamps. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove handler for unused KVASER_PCIEFD_PACK_TYPE_EFRAME_ACKJimmy Assarsson
The Kvaser KCAN controller got a feature to send error frames on request. The packet KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK signals that the requested error frame was transmitted. Since this feature is not supported by the driver, drop the handler and add KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK to the list of unexpected packet types. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove useless write to interrupt registerJimmy Assarsson
The PCI interrupt register, KVASER_PCIEFD_IRQ_REG, is level triggered. Writing to the register doesn't affect it. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22Merge patch series "can: length: fix definitions and add bit length calculation"Marc Kleine-Budde
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: When created in [1], frames length definitions were added to implement byte queue limits (bql). Because bql expects lengths in bytes, bit length definitions were not considered back then. Recently, a need to refer to the exact frame length in bits, with CAN bit stuffing, appeared in [2]. This series introduces can_frame_bits(): a function-like macro that can calculate the exact size of a CAN(-FD) frame in bits with or without bitsuffing. [1] commit 85d99c3e2a13 ("can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer") Link: https://git.kernel.org/torvalds/c/85d99c3e2a13 [2] RE: [PATCH] can: mcp251xfd: Increase poll timeout Link: https://lore.kernel.org/linux-can/BL3PR11MB64846C83ACD04E9330B0FE66FB729@BL3PR11MB6484.namprd11.prod.outlook.com * Changelog * v4 -> v5: * In __can_cc_frame_bits() and __can_fd_frame_bits(), enclose data_len in brackets to prevent operator precedence issues. * Add a note in can_frame_bits() documentation to explain that data_len shall have no side effects. * While at it, make CAN(FD)_FRAME_LEN_MAX definition fit on a single line. * A few typo/grammar small fixes in the commit descriptions. Link: https://lore.kernel.org/linux-can/20230601165625.100040-1-mailhol.vincent@wanadoo.fr v3 -> v4: * No functional changes. * as reported by Simon Horman, fix typo in the documentation of can_bitstuffing_len(): "bitstream_len" -> "destuffed_len". * as reported by Thomas Kopp, fix several other typos: - "indicatior" -> "indicator" - "in on the wire" -> "on the wire" - "bitsuffing" -> "bitstuffing". * in CAN_FRAME_LEN_MAX comment: specify that only the dynamic bitstuffing gets ignored but that the intermission is included. * move the Suggested-by: Thomas Kopp tag from patch 2 to patch 3. * add Reviewed-by: Thomas Kopp tag on the full series. * add an additional line of comment for the @intermission argument of can_frame_bits(). Link: https://lore.kernel.org/linux-can/20230530144637.4746-1-mailhol.vincent@wanadoo.fr v2 -> v3: * turn can_frame_bits() and can_frame_bytes() into function-like macros. The fact that inline functions can not be used to initialize constant struct fields was bothering me. I did my best to make the macro look as less ugly as possible. * as reported by Simon Horman, add missing document for the is_fd argument of can_frame_bits(). Link: https://lore.kernel.org/linux-can/20230523065218.51227-1-mailhol.vincent@wanadoo.fr v1 -> v2: * as suggested by Thomas Kopp, add a new patch to the series to fix the stuff bit count and the fixed stuff bits definitions * and another patch to fix documentation of the Remote Request Substitution (RRS). * refactor the length definition. Instead of using individual macro, rely on an inline function. One reason is to minimize the number of definitions. Another reason is that because the dynamic bit stuff is calculated differently for CAN and CAN-FD, it is just not possible to multiply the existing CANFD_FRAME_OVERHEAD_SFF/EFF by the overhead ratio to get the bitsuffing: for CAN-FD, the CRC field is already stuffed by the fixed stuff bits and is out of scope of the dynamic bitstuffing. Link: https://lore.kernel.org/linux-can/20230507155506.3179711-1-mailhol.vincent@wanadoo.fr Link: https://lore.kernel.org/all/20230611025728.450837-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: length: refactor frame lengths definition to add size in bitsVincent Mailhol
Introduce a method to calculate the exact size in bits of a CAN(-FD) frame with or without dynamic bitstuffing. These are all the possible combinations taken into account: - Classical CAN or CAN-FD - Standard or Extended frame format - CAN-FD CRC17 or CRC21 - Include or not intermission Instead of doing several individual macro definitions, declare the can_frame_bits() function-like macro. To this extent, do a full refactoring of the length definitions. In addition add the can_frame_bytes(). This function-like macro replaces the existing macro: - CAN_FRAME_OVERHEAD_SFF: can_frame_bytes(false, false, 0) - CAN_FRAME_OVERHEAD_EFF: can_frame_bytes(false, true, 0) - CANFD_FRAME_OVERHEAD_SFF: can_frame_bytes(true, false, 0) - CANFD_FRAME_OVERHEAD_EFF: can_frame_bytes(true, true, 0) Function-like macros were chosen over inline functions because they can be used to initialize const struct fields. The different maximum frame lengths (maximum data length, including intermission) are as follow: Frame type bits bytes ------------------------------------------------------- Classic CAN SFF no bitstuffing 111 14 Classic CAN EFF no bitstuffing 131 17 Classic CAN SFF bitstuffing 135 17 Classic CAN EFF bitstuffing 160 20 CAN-FD SFF no bitstuffing 579 73 CAN-FD EFF no bitstuffing 598 75 CAN-FD SFF bitstuffing 712 89 CAN-FD EFF bitstuffing 736 92 The macro CAN_FRAME_LEN_MAX and CANFD_FRAME_LEN_MAX are kept as an alias to, respectively, can_frame_bytes(false, true, CAN_MAX_DLEN) and can_frame_bytes(true, true, CANFD_MAX_DLEN). In addition to the above: - Use ISO 11898-1:2015 definitions for the names of the CAN frame fields. - Include linux/bits.h for use of BITS_PER_BYTE. - Include linux/math.h for use of mult_frac() and DIV_ROUND_UP(). N.B: the use of DIV_ROUND_UP() is not new to this patch, but the include was previously omitted. - Add copyright 2023 for myself. Suggested-by: Thomas Kopp <Thomas.Kopp@microchip.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Thomas Kopp <Thomas.Kopp@microchip.com> Link: https://lore.kernel.org/all/20230611025728.450837-4-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: length: fix bitstuffing countVincent Mailhol
The Stuff Bit Count is always coded on 4 bits [1]. Update the Stuff Bit Count size accordingly. In addition, the CRC fields of CAN FD Frames contain stuff bits at fixed positions called fixed stuff bits [2]. The CRC field starts with a fixed stuff bit and then has another fixed stuff bit after each fourth bit [2], which allows us to derive this formula: FSB count = 1 + round_down(len(CRC field)/4) The length of the CRC field is [1]: len(CRC field) = len(Stuff Bit Count) + len(CRC) = 4 + len(CRC) with len(CRC) either 17 or 21 bits depending of the payload length. In conclusion, for CRC17: FSB count = 1 + round_down((4 + 17)/4) = 6 and for CRC 21: FSB count = 1 + round_down((4 + 21)/4) = 7 Add a Fixed Stuff bits (FSB) field with above values and update CANFD_FRAME_OVERHEAD_SFF and CANFD_FRAME_OVERHEAD_EFF accordingly. [1] ISO 11898-1:2015 section 10.4.2.6 "CRC field": The CRC field shall contain the CRC sequence followed by a recessive CRC delimiter. For FD Frames, the CRC field shall also contain the stuff count. Stuff count If FD Frames, the stuff count shall be at the beginning of the CRC field. It shall consist of the stuff bit count modulo 8 in a 3-bit gray code followed by a parity bit [...] [2] ISO 11898-1:2015 paragraph 10.5 "Frame coding": In the CRC field of FD Frames, the stuff bits shall be inserted at fixed positions; they are called fixed stuff bits. There shall be a fixed stuff bit before the first bit of the stuff count, even if the last bits of the preceding field are a sequence of five consecutive bits of identical value, there shall be only the fixed stuff bit, there shall not be two consecutive stuff bits. A further fixed stuff bit shall be inserted after each fourth bit of the CRC field [...] Fixes: 85d99c3e2a13 ("can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer") Suggested-by: Thomas Kopp <Thomas.Kopp@microchip.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Thomas Kopp <Thomas.Kopp@microchip.com> Link: https://lore.kernel.org/all/20230611025728.450837-2-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: length: fix description of the RRS fieldVincent Mailhol
The CAN-FD frames only have one reserved bit. The bit corresponding to Classical CAN frame's RTR bit is called the "Remote Request Substitution (RRS)" [1]. N.B. The RRS is not to be confused with the Substitute Remote Request (SRR). Fix the description in the CANFD_FRAME_OVERHEAD_SFF/EFF macros. The total remains unchanged, so this is just a documentation fix. In addition to the above add myself as copyright owner for 2020 (as coauthor of the initial version, c.f. Fixes tag). [1] ISO 11898-1:2015 paragraph 10.4.2.3 "Arbitration field": RSS bit [only in FD Frames] The RRS bit shall be transmitted in FD Frames at the position of the RTR bit in Classical Frames. The RRS bit shall be transmitted dominant, but receivers shall accept recessive and dominant RRS bits. Fixes: 85d99c3e2a13 ("can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer") Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Thomas Kopp <Thomas.Kopp@microchip.com> Link: https://lore.kernel.org/all/20230611025728.450837-3-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22Merge patch series "can: fix coding style"Marc Kleine-Budde
Marc Kleine-Budde <mkl@pengutronix.de> says: here are 2 coding style fixes for rx-offload and the ti_hecc driver. Link: https://lore.kernel.org/all/20230620131130.240180-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: m_can: fix coding styleMarc Kleine-Budde
This patch aligns code to match open parenthesis and removes a trailing whitespace. Fixes: eb38c2053b67 ("can: rx-offload: rename can_rx_offload_queue_sorted() -> can_rx_offload_queue_timestamp()") Fixes: f5071d9e729d ("can: m_can: m_can_handle_bus_errors(): add support for handling DLEC error on CAN-FD frames") Reported-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/all/20230523062410.1984098-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: ti_hecc: fix coding styleMarc Kleine-Budde
This patch aligns code to match open parenthesis. Link: https://lore.kernel.org/all/20230620131130.240180-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: rx-offload: fix coding styleMarc Kleine-Budde
This patch aligns code to match open parenthesis. Link: https://lore.kernel.org/all/20230620131130.240180-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22Merge patch series "can: sja1000: Prepare the use of a threaded handler"Marc Kleine-Budde
Miquel Raynal provides a series for the sja1000 driver to work around overrun stalls with a soft reset on Renesas SoCs. Link: https://lore.kernel.org/all/20230616134553.2786391-1-miquel.raynal@bootlin.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: sja1000: Prevent overrun stalls with a soft reset on Renesas SoCsMiquel Raynal
In their RZN1 SoC, Renesas put a CAN controller supposed to act very similarly to the original Philips sja1000. In practice, while flooding the bus with another device, we discovered that the controller very often after an overrun situation would just refuse any new frame, drop them all and trigger over and over again the overrun interrupt, even though the buffer would have been totally emptied. The controller acts like if its internal buffer offsets (where it writes and where the host reads) where totally screwed-up. Renesas manual mentions a single action to perform in order to resynchronize the read and write offsets within the buffer: performing a soft reset. Performing a soft reset takes a bit of time and involves small delays, so better do that in a threaded handler rather than inside the hard IRQ handler. Add platform data to recognize the platforms which need this workaround, and when the faulty situation is diagnosed, stop what is being performed and request the threaded handler to be executed in order to perform the reset. Tested-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com> # 5.10 Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/all/20230616134553.2786391-2-miquel.raynal@bootlin.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: sja1000: Prepare the use of a threaded handlerMiquel Raynal
In order to support a flavor of the sja1000 which sometimes freezes, it will be needed upon certain interrupts to perform a soft reset. The soft reset operation takes a bit of time, so better not do it within the hard interrupt handler but rather in a threaded handler. Let's prepare the possibility for sja1000_err() to request "interrupting" the current flow and request the threaded handler to be run while keeping the interrupt line low. There is no functional change. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/all/20230616134553.2786391-1-miquel.raynal@bootlin.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22Merge patch series "can: esd_usb: More preparation before supporting esd ↵Marc Kleine-Budde
CAN-USB/3 (addendum)" Frank Jungclaus <frank.jungclaus@esd.eu> says: While trying to again merge my code changes for CAN-USB/3, I came across some more places where it could make sense to change them analogous to the previous clean-up patch series [1]. [1] [PATCH v2 0/6] can: esd_usb: More preparation before supporting esd CAN-USB/3 Link: https://lore.kernel.org/all/20230519195600.420644-1-frank.jungclaus@esd.eu Link: https://lore.kernel.org/r/20230523173105.3175086-1-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: esd_usb: Use consistent prefix ESD_USB_ for macrosFrank Jungclaus
Rename the following macros: - ESD_RTR to ESD_USB_RTR - ESD_EV_CAN_ERROR_EXT to ESD_USB_EV_CAN_ERROR_EXT Additionally remove the double newline trailing to definition of ESD_USB_RTR. Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/r/20230523173105.3175086-3-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: esd_usb: Make use of kernel macros BIT() and GENMASK()Frank Jungclaus
Make use of kernel macros BIT() and GENMASK(). Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/r/20230523173105.3175086-2-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22Merge patch series "can: esd_usb: More preparation before supporting esd ↵Marc Kleine-Budde
CAN-USB/3" Frank Jungclaus <frank.jungclaus@esd.eu> says: Apply another small batch of patches as preparation for adding support of the newly available esd CAN-USB/3 to esd_usb.c. v1 -> v2: * Make use of GENMASK() macro for ESD_USB_NO_BAUDRATE and ESD_USB_IDMASK * Also use the BIT() macro for ESD_USB2_3_SAMPLES * Removed comments with redundant hexadecimal values from BIT()-constants * Reworded (shortened) the commit messages * Changed the macro ESD_USB_3_SAMPLES to ESD_USB_TRIPLE_SAMPLES v1: * Link: https://lore.kernel.org/all/20230517192251.2405290-1-frank.jungclaus@esd.eu Link: https://lore.kernel.org/r/20230519195600.420644-1-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: esd_usb: Don't bother the user with nonessential log messageFrank Jungclaus
Replace a netdev_info(), emitting an informational message about the BTR value to be send to the controller, with a debug message by means of netdev_dbg(). Link: https://lore.kernel.org/all/20230509-superglue-hazy-38108aa66bfa-mkl@pengutronix.de/ Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/r/20230519195600.420644-7-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: esd_usb: Replace hardcoded message length given to USB commandsFrank Jungclaus
Replace all hardcoded values supplied to the len element of esd_usb_msg (and its siblings) by more readable expressions, based on sizeof(), offsetof(), etc. Also spend documentation / comments that the len element of esd_usb_msg is in multiples of 32bit words and not in bytes. Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@mail.gmail.com/ Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/r/20230519195600.420644-6-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: esd_usb: Prefix all structures with the device nameFrank Jungclaus
Prefix all the structures with the device name. For commonly used structures make use of (the module name) esd_usb_. For esd CAN-USB/2 and CAN-USB/Micro specific structures use esd_usb_2_ and esd_usb_m. Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@mail.gmail.com/ Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/r/20230519195600.420644-5-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: esd_usb: Use consistent prefixes for macrosFrank Jungclaus
Add the consistent prefix ESD_USB_ to all macros defined within esd_usb.c. For macros specific to esd CAN-USB/2 use ESD_USB_2_ as prefix. For macros specific to esd CAN-USB/Micro use ESD_USB_M_ as prefix. Change the macro ESD_USB_3_SAMPLES to ESD_USB_TRIPLE_SAMPLES to not mix up with the prefix ESD_USB_3_ which will be introduced for the CAN-USB/3 device. Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@mail.gmail.com/ Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/r/20230519195600.420644-4-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: esd_usb: Replace initializer macros used for struct can_bittiming_constFrank Jungclaus
Replace the macros used to initialize the members of struct can_bittiming_const with direct values. Then also use those struct members to do the calculations in esd_usb2_set_bittiming(). Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@mail.gmail.com/ Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/r/20230519195600.420644-3-frank.jungclaus@esd.eu [mkl: esd_usb2_set_bittiming() use esd_usb2_bittiming_const instead of priv->can.bittiming_const] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-21wifi: mac80211: report all unusable beacon framesBenjamin Berg
Properly check for RX_DROP_UNUSABLE now that the new drop reason infrastructure is used. Without this change, the comparison will always be false as a more specific reason is given in the lower bits of result. Fixes: baa951a1c177 ("mac80211: use the new drop reasons infrastructure") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20230621120543.412920-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21Merge branch 'mptcp-expose-more-info-and-small-improvements'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: expose more info and small improvements Patch 1-3/9 track and expose some aggregated data counters at the MPTCP level: the number of retransmissions and the bytes that have been transferred. The first patch prepares the work by moving where snd_una is updated for fallback sockets while the last patch adds some tests to cover the new code. Patch 4-6/9 introduce a new getsockopt for SOL_MPTCP: MPTCP_FULL_INFO. This new socket option allows to combine info from MPTCP_INFO, MPTCP_TCPINFO and MPTCP_SUBFLOW_ADDRS socket options into one. It can be needed to have all info in one because the path-manager can close and re-create subflows between getsockopt() and fooling the accounting. The first patch introduces a unique subflow ID to easily detect when subflows are being re-created with the same 5-tuple while the last patch adds some tests to cover the new code. Please note that patch 5/9 ("mptcp: introduce MPTCP_FULL_INFO getsockopt") can reveal a bug that were there for a bit of time, see [1]. A fix has recently been fixed to netdev for the -net tree: "mptcp: ensure listener is unhashed before updating the sk status", see [2]. There is no conflicts between the two patches but it might be better to apply this series after the one for -net and after having merged "net" into "net-next". Patch 7/9 is similar to commit 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") recently applied in the -net tree but here it adapts the new code that is only in net-next (and it fixes a merge conflict resolution which didn't have any impact). Patch 8 and 9/9 are two simple refactoring. One to consolidate the transition to TCP_CLOSE in mptcp_do_fastclose() and avoid duplicated code. The other one reduces the scope of an argument passed to mptcp_pm_alloc_anno_list() function. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/407 [1] Link: https://lore.kernel.org/netdev/20230620-upstream-net-20230620-misc-fixes-for-v6-4-v1-0-f36aa5eae8b9@tessares.net/ [2] ==================== Link: https://lore.kernel.org/r/20230620-upstream-net-next-20230620-mptcp-expose-more-info-and-misc-v1-0-62b9444bfd48@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: pass addr to mptcp_pm_alloc_anno_listGeliang Tang
Pass addr parameter to mptcp_pm_alloc_anno_list() instead of entry. We can reduce the scope, e.g. in mptcp_pm_alloc_anno_list(), we only access "entry->addr", we can then restrict to the pointer to "addr" then. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: consolidate transition to TCP_CLOSE in mptcp_do_fastclose()Paolo Abeni
The MPTCP code always set the msk state to TCP_CLOSE before calling performing the fast-close. Move such state transition in mptcp_do_fastclose() to avoid some code duplication. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21selftests: mptcp: join: skip check if MIB counter not supported (part 2)Matthieu Baerts
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP MIB counters introduced in commit fc518953bc9c ("mptcp: add and use MIB counter infrastructure") and more later. The MPTCP Join selftest heavily relies on these counters. If a counter is not supported by the kernel, it is not displayed when using 'nstat -z'. We can then detect that and skip the verification. A new helper (get_counter()) has been added recently in the -net tree to do the required checks and return an error if the counter is not available. This commit is similar to the one with the same title applied in the -net tree but it modifies code only present in net-next for the moment, see the Fixes commit below. While at it, we can also remove the use of ${extra_msg} variable which is never assigned in chk_rm_tx_nr() function and use 'echo' without '-n' parameter. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21selftests: mptcp: add MPTCP_FULL_INFO testcasePaolo Abeni
Add a testcase explicitly triggering the newly introduce MPTCP_FULL_INFO getsockopt. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: introduce MPTCP_FULL_INFO getsockoptPaolo Abeni
Some user-space applications want to monitor the subflows utilization. Dumping the per subflow tcp_info is not enough, as the PM could close and re-create the subflows under-the-hood, fooling the accounting. Even checking the src/dst addresses used by each subflow could not be enough, because new subflows could re-use the same address/port of the just closed one. This patch introduces a new socket option, allow dumping all the relevant information all-at-once (everything, everywhere...), in a consistent manner. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/388 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: add subflow unique idPaolo Abeni
The user-space need to properly account the data received/sent by individual subflows. When additional subflows are created and/or closed during the MPTCP socket lifetime, the information currently exposed via MPTCP_TCPINFO are not enough: subflows are identified only by the sequential position inside the info dumps, and that will change with the above mentioned events. To solve the above problem, this patch introduces a new subflow identifier that is unique inside the given MPTCP socket scope. The initial subflow get the id 1 and the other subflows get incremental values at join time. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21selftests: mptcp: explicitly tests aggregate countersPaolo Abeni
Update the existing sockopt test-case to do some basic checks on the newly added counters. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/385 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: track some aggregate data countersPaolo Abeni
Currently there are no data transfer counters accounting for all the subflows used by a given MPTCP socket. The user-space can compute such figures aggregating the subflow info, but that is inaccurate if any subflow is closed before the MPTCP socket itself. Add the new counters in the MPTCP socket itself and expose them via the existing diag and sockopt. While touching mptcp_diag_fill_info(), acquire the relevant locks before fetching the msk data, to ensure better data consistency Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/385 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: move snd_una update earlier for fallback socketPaolo Abeni
That will avoid an unneeded conditional in both the fast-path and in the fallback case and will simplify a bit the next patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21Merge branch 'mptcp-fixes-for-6-4'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: fixes for 6.4 Patch 1 correctly handles disconnect() failures that can happen in some specific cases: now the socket state is set as unconnected as expected. That fixes an issue introduced in v6.2. Patch 2 fixes a divide by zero bug in mptcp_recvmsg() with a fix similar to a recent one from Eric Dumazet for TCP introducing sk_wait_pending flag. It should address an issue present in MPTCP from almost the beginning, from v5.9. Patch 3 fixes a possible list corruption on passive MPJ even if the race seems very unlikely, better be safe than sorry. The possible issue is present from v5.17. Patch 4 consolidates fallback and non fallback state machines to avoid leaking some MPTCP sockets. The fix is likely needed for versions from v5.11. Patch 5 drops code that is no longer used after the introduction of patch 4/6. This is not really a fix but this patch can probably land in the -net tree as well not to leave unused code. Patch 6 ensures listeners are unhashed before updating their sk status to avoid possible deadlocks when diag info are going to be retrieved with a lock. Even if it should not be visible with the way we are currently getting diag info, the issue is present from v5.17. ==================== Link: https://lore.kernel.org/r/20230620-upstream-net-20230620-misc-fixes-for-v6-4-v1-0-f36aa5eae8b9@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: ensure listener is unhashed before updating the sk statusPaolo Abeni
The MPTCP protocol access the listener subflow in a lockless manner in a couple of places (poll, diag). That works only if the msk itself leaves the listener status only after that the subflow itself has been closed/disconnected. Otherwise we risk deadlock in diag, as reported by Christoph. Address the issue ensuring that the first subflow (the listener one) is always disconnected before updating the msk socket status. Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/407 Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: drop legacy code around RX EOFPaolo Abeni
Thanks to the previous patch -- "mptcp: consolidate fallback and non fallback state machine" -- we can finally drop the "temporary hack" used to detect rx eof. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21mptcp: consolidate fallback and non fallback state machinePaolo Abeni
An orphaned msk releases the used resources via the worker, when the latter first see the msk in CLOSED status. If the msk status transitions to TCP_CLOSE in the release callback invoked by the worker's final release_sock(), such instance of the workqueue will not take any action. Additionally the MPTCP code prevents scheduling the worker once the socket reaches the CLOSE status: such msk resources will be leaked. The only code path that can trigger the above scenario is the __mptcp_check_send_data_fin() in fallback mode. Address the issue removing the special handling of fallback socket in __mptcp_check_send_data_fin(), consolidating the state machine for fallback and non fallback socket. Since non-fallback sockets do not send and do not receive data_fin, the mptcp code can update the msk internal status to match the next step in the SM every time data fin (ack) should be generated or received. As a consequence we can remove a bunch of checks for fallback from the fastpath. Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 03:20:36 +0000