summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-12-04f2fs: Add sanity checks before unlinking and loading inodesNikola Z. Ivanov
Add check for inode->i_nlink == 1 for directories during unlink, as their value is decremented twice, which can trigger a warning in drop_nlink. In such case mark the filesystem as corrupted and return from the function call with the relevant failure return value. Additionally add the check for i_nlink == 1 in sanity_check_inode in order to detect on-disk corruption early. Reported-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c07d47c7bc68f47b9083 Tested-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: Rename f2fs_unlink exit labelNikola Z. Ivanov
Rename "fail" label to "out" as it's used as a default exit path out of f2fs_unlink as well as error path. Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: ensure minimum trim granularity accounts for all devicesYongpeng Yang
When F2FS uses multiple block devices, each device may have a different discard granularity. The minimum trim granularity must be at least the maximum discard granularity of all devices, excluding zoned devices. Use max_t instead of the max() macro to compute the maximum value. Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: fix uninitialized one_time_gc in victim_sel_policyXiaole He
The one_time_gc field in struct victim_sel_policy is conditionally initialized but unconditionally read, leading to undefined behavior that triggers UBSAN warnings. In f2fs_get_victim() at fs/f2fs/gc.c:774, the victim_sel_policy structure is declared without initialization: struct victim_sel_policy p; The field p.one_time_gc is only assigned when the 'one_time' parameter is true (line 789): if (one_time) { p.one_time_gc = one_time; ... } However, this field is unconditionally read in subsequent get_gc_cost() at line 395: if (p->one_time_gc && (valid_thresh_ratio < 100) && ...) When one_time is false, p.one_time_gc contains uninitialized stack memory. Hence p.one_time_gc is an invalid bool value. UBSAN detects this invalid bool value: UBSAN: invalid-load in fs/f2fs/gc.c:395:7 load of value 77 is not a valid value for type '_Bool' CPU: 3 UID: 0 PID: 1297 Comm: f2fs_gc-252:16 Not tainted 6.18.0-rc3 #5 PREEMPT(voluntary) Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x70/0x90 dump_stack+0x14/0x20 __ubsan_handle_load_invalid_value+0xb3/0xf0 ? dl_server_update+0x2e/0x40 ? update_curr+0x147/0x170 f2fs_get_victim.cold+0x66/0x134 [f2fs] ? sched_balance_newidle+0x2ca/0x470 ? finish_task_switch.isra.0+0x8d/0x2a0 f2fs_gc+0x2ba/0x8e0 [f2fs] ? _raw_spin_unlock_irqrestore+0x12/0x40 ? __timer_delete_sync+0x80/0xe0 ? timer_delete_sync+0x14/0x20 ? schedule_timeout+0x82/0x100 gc_thread_func+0x38b/0x860 [f2fs] ? gc_thread_func+0x38b/0x860 [f2fs] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0x10b/0x220 ? __pfx_gc_thread_func+0x10/0x10 [f2fs] ? _raw_spin_unlock_irq+0x12/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x11a/0x160 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> This issue is reliably reproducible with the following steps on a 100GB SSD /dev/vdb: mkfs.f2fs -f /dev/vdb mount /dev/vdb /mnt/f2fs_test fio --name=gc --directory=/mnt/f2fs_test --rw=randwrite \ --bs=4k --size=8G --numjobs=12 --fsync=4 --runtime=10 \ --time_based echo 1 > /sys/fs/f2fs/vdb/gc_urgent The uninitialized value causes incorrect GC victim selection, leading to unpredictable garbage collection behavior. Fix by zero-initializing the entire victim_sel_policy structure to ensure all fields have defined values. Fixes: e791d00bd06c ("f2fs: add valid block ratio not to do excessive GC for one time GC") Cc: stable@kernel.org Signed-off-by: Xiaole He <hexiaole1994@126.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: fix to access i_size w/ i_size_read()Chao Yu
It recommends to use i_size_{read,write}() to access and update i_size, otherwise, we may get wrong tearing value due to high 32-bits value and low 32-bits value of i_size field are not updated atomically in 32-bits archicture machine. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: ensure node page reads complete before f2fs_put_super() finishesJan Prusakowski
Xfstests generic/335, generic/336 sometimes crash with the following message: F2FS-fs (dm-0): detect filesystem reference count leak during umount, type: 9, count: 1 ------------[ cut here ]------------ kernel BUG at fs/f2fs/super.c:1939! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 609351 Comm: umount Tainted: G W 6.17.0-rc5-xfstests-g9dd1835ecda5 #1 PREEMPT(none) Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_put_super+0x3b3/0x3c0 Call Trace: <TASK> generic_shutdown_super+0x7e/0x190 kill_block_super+0x1a/0x40 kill_f2fs_super+0x9d/0x190 deactivate_locked_super+0x30/0xb0 cleanup_mnt+0xba/0x150 task_work_run+0x5c/0xa0 exit_to_user_mode_loop+0xb7/0xc0 do_syscall_64+0x1ae/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- It appears that sometimes it is possible that f2fs_put_super() is called before all node page reads are completed. Adding a call to f2fs_wait_on_all_pages() for F2FS_RD_NODE fixes the problem. Cc: stable@kernel.org Fixes: 20872584b8c0b ("f2fs: fix to drop all dirty meta/node pages during umount()") Signed-off-by: Jan Prusakowski <jprusakowski@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: block cache/dio write during f2fs_enable_checkpoint()Chao Yu
If there are too many background IOs during f2fs_enable_checkpoint(), sync_inodes_sb() may be blocked for long time due to it will loop to write dirty datas which are generated by in parallel write() continuously. Let's change as below to resolve this issue: - hold cp_enable_rwsem write lock to block any cache/dio write - decrease DEF_ENABLE_INTERVAL from 16 to 5 In addition, dump more logs during f2fs_enable_checkpoint(). Testcase: 1. fill data into filesystem until 90% usage. 2. mount -o remount,checkpoint=disable:10% /data 3. fio --rw=randwrite --bs=4kb --size=1GB --numjobs=10 \ --iodepth=64 --ioengine=psync --time_based --runtime=600 \ --directory=/data/fio_dir/ & 4. mount -o remount,checkpoint=enable /data Before: F2FS-fs (dm-51): f2fs_enable_checkpoint() finishes, writeback:7232, sync:39793, cp:457 After: F2FS-fs (dm-51): f2fs_enable_checkpoint end, writeback:5032, lock:0, sync_inode:5552, sync_fs:84 Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: fix to propagate error from f2fs_enable_checkpoint()Chao Yu
In order to let userspace detect such error rather than suffering silent failure. Fixes: 4354994f097d ("f2fs: checkpoint disabling") Cc: stable@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: change the unlock parameter of f2fs_put_page to boolYongpeng Yang
Change the type of the unlock parameter of f2fs_put_page to bool. All callers should consistently pass true or false. No logical change. Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: invalidate dentry cache on failed whiteout creationDeepanshu Kartikey
F2FS can mount filesystems with corrupted directory depth values that get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT operations are performed on such directories, f2fs_rename performs directory modifications (updating target entry and deleting source entry) before attempting to add the whiteout entry via f2fs_add_link. If f2fs_add_link fails due to the corrupted directory structure, the function returns an error to VFS, but the partial directory modifications have already been committed to disk. VFS assumes the entire rename operation failed and does not update the dentry cache, leaving stale mappings. In the error path, VFS does not call d_move() to update the dentry cache. This results in new_dentry still pointing to the old inode (new_inode) which has already had its i_nlink decremented to zero. The stale cache causes subsequent operations to incorrectly reference the freed inode. This causes subsequent operations to use cached dentry information that no longer matches the on-disk state. When a second rename targets the same entry, VFS attempts to decrement i_nlink on the stale inode, which may already have i_nlink=0, triggering a WARNING in drop_nlink(). Example sequence: 1. First rename (RENAME_WHITEOUT): file2 → file1 - f2fs updates file1 entry on disk (points to inode 8) - f2fs deletes file2 entry on disk - f2fs_add_link(whiteout) fails (corrupted directory) - Returns error to VFS - VFS does not call d_move() due to error - VFS cache still has: file1 → inode 7 (stale!) - inode 7 has i_nlink=0 (already decremented) 2. Second rename: file3 → file1 - VFS uses stale cache: file1 → inode 7 - Tries to drop_nlink on inode 7 (i_nlink already 0) - WARNING in drop_nlink() Fix this by explicitly invalidating old_dentry and new_dentry when f2fs_add_link fails during whiteout creation. This forces VFS to refresh from disk on subsequent operations, ensuring cache consistency even when the rename partially succeeds. Reproducer: 1. Mount F2FS image with corrupted i_current_depth 2. renameat2(file2, file1, RENAME_WHITEOUT) 3. renameat2(file3, file1, 0) 4. System triggers WARNING in drop_nlink() Fixes: 7e01e7ad746b ("f2fs: support RENAME_WHITEOUT") Reported-by: syzbot+632cf32276a9a564188d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=632cf32276a9a564188d Suggested-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/all/20251022233349.102728-1-kartikey406@gmail.com/ [v1] Cc: stable@vger.kernel.org Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: use global inline_xattr_slab instead of per-sb slab cacheChao Yu
As Hong Yun reported in mailing list: loop7: detected capacity change from 0 to 131072 ------------[ cut here ]------------ kmem_cache of name 'f2fs_xattr_entry-7:7' already exists WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline] WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307 CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline] RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307 Call Trace:  __kmem_cache_create include/linux/slab.h:353 [inline]  f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline]  f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843  f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918  get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692  vfs_get_tree+0x43/0x140 fs/super.c:1815  do_new_mount+0x201/0x550 fs/namespace.c:3808  do_mount fs/namespace.c:4136 [inline]  __do_sys_mount fs/namespace.c:4347 [inline]  __se_sys_mount+0x298/0x2f0 fs/namespace.c:4324  do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]  do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94  entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug can be reproduced w/ below scripts: - mount /dev/vdb /mnt1 - mount /dev/vdc /mnt2 - umount /mnt1 - mounnt /dev/vdb /mnt1 The reason is if we created two slab caches, named f2fs_xattr_entry-7:3 and f2fs_xattr_entry-7:7, and they have the same slab size. Actually, slab system will only create one slab cache core structure which has slab name of "f2fs_xattr_entry-7:3", and two slab caches share the same structure and cache address. So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it will decrease reference count of slab cache, rather than release slab cache entirely, since there is one more user has referenced the cache. Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again, slab system will find that there is existed cache which has the same name and trigger the warning. Let's changes to use global inline_xattr_slab instead of per-sb slab cache for fixing. Fixes: a999150f4fe3 ("f2fs: use kmem_cache pool during inline xattr lookups") Cc: stable@kernel.org Reported-by: Hong Yun <yhong@link.cuhk.edu.hk> Tested-by: Hong Yun <yhong@link.cuhk.edu.hk> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: fix to avoid updating compression context during writebackChao Yu
Bai, Shuangpeng <sjb7183@psu.edu> reported a bug as below: Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 11441 Comm: syz.0.46 Not tainted 6.17.0 #1 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:f2fs_all_cluster_page_ready+0x106/0x550 fs/f2fs/compress.c:857 Call Trace: <TASK> f2fs_write_cache_pages fs/f2fs/data.c:3078 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3290 [inline] f2fs_write_data_pages+0x1c19/0x3600 fs/f2fs/data.c:3317 do_writepages+0x38e/0x640 mm/page-writeback.c:2634 filemap_fdatawrite_wbc mm/filemap.c:386 [inline] __filemap_fdatawrite_range mm/filemap.c:419 [inline] file_write_and_wait_range+0x2ba/0x3e0 mm/filemap.c:794 f2fs_do_sync_file+0x6e6/0x1b00 fs/f2fs/file.c:294 generic_write_sync include/linux/fs.h:3043 [inline] f2fs_file_write_iter+0x76e/0x2700 fs/f2fs/file.c:5259 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x7e9/0xe00 fs/read_write.c:686 ksys_write+0x19d/0x2d0 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf7/0x470 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The bug was triggered w/ below race condition: fsync setattr ioctl - f2fs_do_sync_file - file_write_and_wait_range - f2fs_write_cache_pages : inode is non-compressed : cc.cluster_size = F2FS_I(inode)->i_cluster_size = 0 - tag_pages_for_writeback - f2fs_setattr - truncate_setsize - f2fs_truncate - f2fs_fileattr_set - f2fs_setflags_common - set_compress_context : F2FS_I(inode)->i_cluster_size = 4 : set_inode_flag(inode, FI_COMPRESSED_FILE) - f2fs_compressed_file : return true - f2fs_all_cluster_page_ready : "pgidx % cc->cluster_size" trigger dividing 0 issue Let's change as below to fix this issue: - introduce a new atomic type variable .writeback in structure f2fs_inode_info to track the number of threads which calling f2fs_write_cache_pages(). - use .i_sem lock to protect .writeback update. - check .writeback before update compression context in f2fs_setflags_common() to avoid race w/ ->writepages. Fixes: 4c8ff7095bef ("f2fs: support data compression") Cc: stable@kernel.org Reported-by: Bai, Shuangpeng <sjb7183@psu.edu> Tested-by: Bai, Shuangpeng <sjb7183@psu.edu> Closes: https://lore.kernel.org/lkml/44D8F7B3-68AD-425F-9915-65D27591F93F@psu.edu Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: fix to avoid updating zero-sized extent in extent cacheChao Yu
As syzbot reported: F2FS-fs (loop0): __update_extent_tree_range: extent len is zero, type: 0, extent [0, 0, 0], age [0, 0] ------------[ cut here ]------------ kernel BUG at fs/f2fs/extent_cache.c:678! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:__update_extent_tree_range+0x13bc/0x1500 fs/f2fs/extent_cache.c:678 Call Trace: <TASK> f2fs_update_read_extent_cache_range+0x192/0x3e0 fs/f2fs/extent_cache.c:1085 f2fs_do_zero_range fs/f2fs/file.c:1657 [inline] f2fs_zero_range+0x10c1/0x1580 fs/f2fs/file.c:1737 f2fs_fallocate+0x583/0x990 fs/f2fs/file.c:2030 vfs_fallocate+0x669/0x7e0 fs/open.c:342 ioctl_preallocate fs/ioctl.c:289 [inline] file_ioctl+0x611/0x780 fs/ioctl.c:-1 do_vfs_ioctl+0xb33/0x1430 fs/ioctl.c:576 __do_sys_ioctl fs/ioctl.c:595 [inline] __se_sys_ioctl+0x82/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f07bc58eec9 In error path of f2fs_zero_range(), it may add a zero-sized extent into extent cache, it should be avoided. Fixes: 6e9619499f53 ("f2fs: support in batch fzero in dnode page") Cc: stable@kernel.org Reported-by: syzbot+24124df3170c3638b35f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/68e5d698.050a0220.256323.0032.GAE@google.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: fix to avoid potential deadlockChao Yu
As Jiaming Zhang and syzbot reported, there is potential deadlock in f2fs as below: Chain exists of: &sbi->cp_rwsem --> fs_reclaim --> sb_internal#2 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); rlock(&sbi->cp_rwsem); *** DEADLOCK *** 3 locks held by kswapd0/73: #0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:7015 [inline] #0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x951/0x2800 mm/vmscan.c:7389 #1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_trylock_shared fs/super.c:562 [inline] #1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_cache_scan+0x91/0x4b0 fs/super.c:197 #2: ffff888011840610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x8d9/0x1b60 fs/f2fs/inode.c:890 stack backtrace: CPU: 0 UID: 0 PID: 73 Comm: kswapd0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_circular_bug+0x2ee/0x310 kernel/locking/lockdep.c:2043 check_noncircular+0x134/0x160 kernel/locking/lockdep.c:2175 check_prev_add kernel/locking/lockdep.c:3165 [inline] check_prevs_add kernel/locking/lockdep.c:3284 [inline] validate_chain+0xb9b/0x2140 kernel/locking/lockdep.c:3908 __lock_acquire+0xab9/0xd20 kernel/locking/lockdep.c:5237 lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868 down_read+0x46/0x2e0 kernel/locking/rwsem.c:1537 f2fs_down_read fs/f2fs/f2fs.h:2278 [inline] f2fs_lock_op fs/f2fs/f2fs.h:2357 [inline] f2fs_do_truncate_blocks+0x21c/0x10c0 fs/f2fs/file.c:791 f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:867 f2fs_truncate+0x489/0x7c0 fs/f2fs/file.c:925 f2fs_evict_inode+0x9f2/0x1b60 fs/f2fs/inode.c:897 evict+0x504/0x9c0 fs/inode.c:810 f2fs_evict_inode+0x1dc/0x1b60 fs/f2fs/inode.c:853 evict+0x504/0x9c0 fs/inode.c:810 dispose_list fs/inode.c:852 [inline] prune_icache_sb+0x21b/0x2c0 fs/inode.c:1000 super_cache_scan+0x39b/0x4b0 fs/super.c:224 do_shrink_slab+0x6ef/0x1110 mm/shrinker.c:437 shrink_slab_memcg mm/shrinker.c:550 [inline] shrink_slab+0x7ef/0x10d0 mm/shrinker.c:628 shrink_one+0x28a/0x7c0 mm/vmscan.c:4955 shrink_many mm/vmscan.c:5016 [inline] lru_gen_shrink_node mm/vmscan.c:5094 [inline] shrink_node+0x315d/0x3780 mm/vmscan.c:6081 kswapd_shrink_node mm/vmscan.c:6941 [inline] balance_pgdat mm/vmscan.c:7124 [inline] kswapd+0x147c/0x2800 mm/vmscan.c:7389 kthread+0x70e/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> The root cause is deadlock among four locks as below: kswapd - fs_reclaim --- Lock A - shrink_one - evict - f2fs_evict_inode - sb_start_intwrite --- Lock B - iput - evict - f2fs_evict_inode - sb_start_intwrite --- Lock B - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_lock_op --- Lock C ioctl - f2fs_ioc_commit_atomic_write - f2fs_lock_op --- Lock C - __f2fs_commit_atomic_write - __replace_atomic_write_block - f2fs_get_dnode_of_data - __get_node_folio - f2fs_check_nid_range - f2fs_handle_error - f2fs_record_errors - f2fs_down_write --- Lock D open - do_open - do_truncate - security_inode_need_killpriv - f2fs_getxattr - lookup_all_xattrs - f2fs_handle_error - f2fs_record_errors - f2fs_down_write --- Lock D - f2fs_commit_super - read_mapping_folio - filemap_alloc_folio_noprof - prepare_alloc_pages - fs_reclaim_acquire --- Lock A In order to avoid such deadlock, we need to avoid grabbing sb_lock in f2fs_handle_error(), so, let's use asynchronous method instead: - remove f2fs_handle_error() implementation - rename f2fs_handle_error_async() to f2fs_handle_error() - spread f2fs_handle_error() Fixes: 95fa90c9e5a7 ("f2fs: support recording errors into superblock") Cc: stable@kernel.org Reported-by: syzbot+14b90e1156b9f6fc1266@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/68eae49b.050a0220.ac43.0001.GAE@google.com Reported-by: Jiaming Zhang <r772577952@gmail.com> Closes: https://lore.kernel.org/lkml/CANypQFa-Gy9sD-N35o3PC+FystOWkNuN8pv6S75HLT0ga-Tzgw@mail.gmail.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: use f2fs_filemap_get_folio() to support fault injectionChao Yu
Use f2fs_filemap_get_folio() instead of __filemap_get_folio() in: - f2fs_find_data_folio - f2fs_write_begin - f2fs_read_merkle_tree_page So that, we can trigger fault injection in those places. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: use f2fs_filemap_get_folio() instead of f2fs_pagecache_get_page()Chao Yu
Let's use f2fs_filemap_get_folio() instead of f2fs_pagecache_get_page() in ra_data_block() and move_data_block(), then remove f2fs_pagecache_get_page() since it has no user. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: convert add_ipu_page() to use folioChao Yu
No logic changes. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-04f2fs: clean up w/ bio_add_folio_nofail()Chao Yu
In add_bio_entry(), adding a page to newly allocated bio should never fail, let's use bio_add_folio_nofail() instead of bio_add_page() & unnecessary error handling for cleanup. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-12-03Merge tag 'net-next-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Replace busylock at the Tx queuing layer with a lockless list. Resulting in a 300% (4x) improvement on heavy TX workloads, sending twice the number of packets per second, for half the cpu cycles. - Allow constantly busy flows to migrate to a more suitable CPU/NIC queue. Normally we perform queue re-selection when flow comes out of idle, but under extreme circumstances the flows may be constantly busy. Add sysctl to allow periodic rehashing even if it'd risk packet reordering. - Optimize the NAPI skb cache, make it larger, use it in more paths. - Attempt returning Tx skbs to the originating CPU (like we already did for Rx skbs). - Various data structure layout and prefetch optimizations from Eric. - Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly quite expensive on recent AMD machines. - Extend threaded NAPI polling to allow the kthread busy poll for packets. - Make MPTCP use Rx backlog processing. This lowers the lock pressure, improving the Rx performance. - Support memcg accounting of MPTCP socket memory. - Allow admin to opt sockets out of global protocol memory accounting (using a sysctl or BPF-based policy). The global limits are a poor fit for modern container workloads, where limits are imposed using cgroups. - Improve heuristics for when to kick off AF_UNIX garbage collection. - Allow users to control TCP SACK compression, and default to 33% of RTT. - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily aggressive rcvbuf growth and overshot when the connection RTT is low. - Preserve skb metadata space across skb_push / skb_pull operations. - Support for IPIP encapsulation in the nftables flowtable offload. - Support appending IP interface information to ICMP messages (RFC 5837). - Support setting max record size in TLS (RFC 8449). - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL. - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock. - Let users configure the number of write buffers in SMC. - Add new struct sockaddr_unsized for sockaddr of unknown length, from Kees. - Some conversions away from the crypto_ahash API, from Eric Biggers. - Some preparations for slimming down struct page. - YAML Netlink protocol spec for WireGuard. - Add a tool on top of YAML Netlink specs/lib for reporting commonly computed derived statistics and summarized system state. Driver API: - Add CAN XL support to the CAN Netlink interface. - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as defined by the OPEN Alliance's "Advanced diagnostic features for 100BASE-T1 automotive Ethernet PHYs" specification. - Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x). - Refactor xfrm_input lock to reduce contention when NIC offloads IPsec and performs RSS. - Add info to devlink params whether the current setting is the default or a user override. Allow resetting back to default. - Add standard device stats for PSP crypto offload. - Leverage DSA frame broadcast to implement simple HSR frame duplication for a lot of switches without dedicated HSR offload. - Add uAPI defines for 1.6Tbps link modes. Device drivers: - Add Motorcomm YT921x gigabit Ethernet switch support. - Add MUCSE driver for N500/N210 1GbE NIC series. - Convert drivers to support dedicated ops for timestamping control, and away from the direct IOCTL handling. While at it support GET operations for PHY timestamping. - Add (and convert most drivers to) a dedicated ethtool callback for reading the Rx ring count. - Significant refactoring efforts in the STMMAC driver, which supports Synopsys turn-key MAC IP integrated into a ton of SoCs. - Ethernet high-speed NICs: - Broadcom (bnxt): - support PPS in/out on all pins - Intel (100G, ice, idpf): - ice: implement standard ethtool and timestamping stats - i40e: support setting the max number of MAC addresses per VF - iavf: support RSS of GTP tunnels for 5G and LTE deployments - nVidia/Mellanox (mlx5): - reduce downtime on interface reconfiguration - disable being an XDP redirect target by default (same as other drivers) to avoid wasting resources if feature is unused - Meta (fbnic): - add support for Linux-managed PCS on 25G, 50G, and 100G links - Wangxun: - support Rx descriptor merge, and Tx head writeback - support Rx coalescing offload - support 25G SPF and 40G QSFP modules - Ethernet virtual: - Google (gve): - allow ethtool to configure rx_buf_len - implement XDP HW RX Timestamping support for DQ descriptor format - Microsoft vNIC (mana): - support HW link state events - handle hardware recovery events when probing the device - Ethernet NICs consumer, and embedded: - usbnet: add support for Byte Queue Limits (BQL) - AMD (amd-xgbe): - add device selftests - NXP (enetc): - add i.MX94 support - Broadcom integrated MACs (bcmgenet, bcmasp): - bcmasp: add support for PHY-based Wake-on-LAN - Broadcom switches (b53): - support port isolation - support BCM5389/97/98 and BCM63XX ARL formats - Lantiq/MaxLinear switches: - support bridge FDB entries on the CPU port - use regmap for register access - allow user to enable/disable learning - support Energy Efficient Ethernet - support configuring RMII clock delays - add tagging driver for MaxLinear GSW1xx switches - Synopsys (stmmac): - support using the HW clock in free running mode - add Eswin EIC7700 support - add Rockchip RK3506 support - add Altera Agilex5 support - Cadence (macb): - cleanup and consolidate descriptor and DMA address handling - add EyeQ5 support - TI: - icssg-prueth: support AF_XDP - Airoha access points: - add missing Ethernet stats and link state callback - add AN7583 support - support out-of-order Tx completion processing - Power over Ethernet: - pd692x0: preserve PSE configuration across reboots - add support for TPS23881B devices - Ethernet PHYs: - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support - Support 50G SerDes and 100G interfaces in Linux-managed PHYs - micrel: - support for non PTP SKUs of lan8814 - enable in-band auto-negotiation on lan8814 - realtek: - cable testing support on RTL8224 - interrupt support on RTL8221B - motorcomm: support for PHY LEDs on YT853 - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag - mscc: support for PHY LED control - CAN drivers: - m_can: add support for optional reset and system wake up - remove can_change_mtu() obsoleted by core handling - mcp251xfd: support GPIO controller functionality - Bluetooth: - add initial support for PASTa - WiFi: - split ieee80211.h file, it's way too big - improvements in VHT radiotap reporting, S1G, Channel Switch Announcement handling, rate tracking in mesh networks - improve multi-radio monitor mode support, and add a cfg80211 debugfs interface for it - HT action frame handling on 6 GHz - initial chanctx work towards NAN - MU-MIMO sniffer improvements - WiFi drivers: - RealTek (rtw89): - support USB devices RTL8852AU and RTL8852CU - initial work for RTL8922DE - improved injection support - Intel: - iwlwifi: new sniffer API support - MediaTek (mt76): - WED support for >32-bit DMA - airoha NPU support - regdomain improvements - continued WiFi7/MLO work - Qualcomm/Atheros: - ath10k: factory test support - ath11k: TX power insertion support - ath12k: BSS color change support - ath12k: statistics improvements - brcmfmac: Acer A1 840 tablet quirk - rtl8xxxu: 40 MHz connection fixes/support" * tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits) net: page_pool: sanitise allocation order net: page pool: xa init with destroy on pp init net/mlx5e: Support XDP target xmit with dummy program net/mlx5e: Update XDP features in switch channels selftests/tc-testing: Test CAKE scheduler when enqueue drops packets net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop wireguard: netlink: generate netlink code wireguard: uapi: generate header with ynl-gen wireguard: uapi: move flag enums wireguard: uapi: move enum wg_cmd wireguard: netlink: add YNL specification selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py selftests: drv-net: introduce Iperf3Runner for measurement use cases selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive() Documentation: net: dsa: mention simple HSR offload helpers Documentation: net: dsa: mention availability of RedBox ...
2025-12-03Merge tag 'bpf-next-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to test_progs runner (Alexis Lothoré) - Convert selftests/bpf/test_xsk to test_progs runner (Bastien Curutchet) - Replace bpf memory allocator with kmalloc_nolock() in bpf_local_storage (Amery Hung), and in bpf streams and range tree (Puranjay Mohan) - Introduce support for indirect jumps in BPF verifier and x86 JIT (Anton Protopopov) and arm64 JIT (Puranjay Mohan) - Remove runqslower bpf tool (Hoyeon Lee) - Fix corner cases in the verifier to close several syzbot reports (Eduard Zingerman, KaFai Wan) - Several improvements in deadlock detection in rqspinlock (Kumar Kartikeya Dwivedi) - Implement "jmp" mode for BPF trampoline and corresponding DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong) - Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul Chaignon) - Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel Borkmann) - Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko) - Optimize bpf_map_update_elem() for map-in-map types (Ritesh Oedayrajsingh Varma) - Introduce overwrite mode for BPF ring buffer (Xu Kuohai) * tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits) bpf: optimize bpf_map_update_elem() for map-in-map types bpf: make kprobe_multi_link_prog_run always_inline selftests/bpf: do not hardcode target rate in test_tc_edt BPF program selftests/bpf: remove test_tc_edt.sh selftests/bpf: integrate test_tc_edt into test_progs selftests/bpf: rename test_tc_edt.bpf.c section to expose program type selftests/bpf: Add success stats to rqspinlock stress test rqspinlock: Precede non-head waiter queueing with AA check rqspinlock: Disable spinning for trylock fallback rqspinlock: Use trylock fallback when per-CPU rqnode is busy rqspinlock: Perform AA checks immediately rqspinlock: Enclose lock/unlock within lock entry acquisitions bpf: Remove runqslower tool selftests/bpf: Remove usage of lsm/file_alloc_security in selftest bpf: Disable file_alloc_security hook bpf: check for insn arrays in check_ptr_alignment bpf: force BPF_F_RDONLY_PROG on insn array creation bpf: Fix exclusive map memory leak selftests/bpf: Make CS length configurable for rqspinlock stress test selftests/bpf: Add lock wait time stats to rqspinlock stress test ...
2025-12-03Merge tag 'linux_kselftest-kunit-6.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: - Make filter parameters configurable via Kconfig - Add description of kunit.enable parameter to documentation * tag 'linux_kselftest-kunit-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Make filter parameters configurable via Kconfig Documentation: kunit: add description of kunit.enable parameter
2025-12-03ktest.pl: Fix uninitialized var in config-bisect.plSteven Rostedt
The error path of copying the old config used the wrong variable in the error message: $ mkdir /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad $ chmod 0 /tmp/build $ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED! Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744. failed to copy to config-good.tmp When it should have shown: failed to copy /tmp/build//.config to config-good.tmp Cc: stable@vger.kernel.org Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program") Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home Reported-by: "John W. Krahn" <jwkrahn@shaw.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2025-12-04pinctrl: starfive: use dynamic GPIO base allocationAli Tariq
The JH7110 pinctrl driver currently sets a static GPIO base number from platform data: sfp->gc.base = info->gc_base; Static base assignment is deprecated and results in the following warning: gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. Set `sfp->gc.base = -1` to let the GPIO core dynamically allocate the base number. This removes the warning and aligns the driver with current GPIO guidelines. Since the GPIO base is now allocated dynamically, remove `gc_base` field in `struct jh7110_pinctrl_soc_info` and the associated `JH7110_SYS_GC_BASE` and `JH7110_AON_GC_BASE` constants as they are no longer used anywhere in the driver. Tested on VisionFive 2 (JH7110 SoC). Signed-off-by: Ali Tariq <alitariq45892@gmail.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2025-12-04pinctrl: single: Fix incorrect type for error return variableHaotian Zhang
pcs_pinconf_get() and pcs_pinconf_set() declare ret as unsigned int, but assign it the return values of pcs_get_function() that may return negative error codes. This causes negative error codes to be converted to large positive values. Change ret from unsigned int to int in both functions. Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Linus Walleij <linusw@kernel.org>
2025-12-03Merge tag 'linux_kselftest-next-6.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - Add basic test for trace_marker_raw file to tracing selftest - Fix invalid array access in printf dma_map_benchmark selftest - Add tprobe enable/disable testcase to tracing selftest - Update fprobe selftest for ftrace based fprobe * tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: tracing: Update fprobe selftest for ftrace based fprobe selftests: tracing: Add tprobe enable/disable testcase selftests/run_kselftest.sh: exit with error if tests fail selftests/dma: fix invalid array access in printf selftests/tracing: Add basic test for trace_marker_raw file
2025-12-03Merge tag 'kbuild-6.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux Pull Kbuild updates from Nicolas Schier: - Enable -fms-extensions, allowing anonymous use of tagged struct or union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary conversion patch is added here, too (btrfs). [ Editor's note: the core of this actually came in early through a shared branch and a few other trees - Linus ] - Introduce architecture-specific CC_CAN_LINK and flags for userprogs - Add new packaging target 'modules-cpio-pkg' for building a initramfs cpio w/ kmods - Handle included .c files in gen_compile_commands - Minor kbuild changes: - Use objtree for module signing key path, fixing oot kmod signing - Improve documentation of KBUILD_BUILD_TIMESTAMP - Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice - Rename scripts/Makefile.extrawarn to Makefile.warn - Drop obsolete types.h check from headers_check.pl - Remove outdated config leak ignore entries * tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: kbuild: add target to build a cpio containing modules initramfs: add gen_init_cpio to hostprogs unconditionally kbuild: allow architectures to override CC_CAN_LINK init: deduplicate cc-can-link.sh invocations kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings scripts: headers_install.sh: Remove two outdated config leak ignore entries scripts/clang-tools: Handle included .c files in gen_compile_commands kbuild: uapi: Drop types.h check from headers_check.pl kbuild: Rename Makefile.extrawarn to Makefile.warn MAINTAINERS, .mailmap: Update mail address for Nicolas Schier kbuild: uapi: reuse KBUILD_USERCFLAGS kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation kbuild: Use objtree for module signing key path btrfs: send: make use of -fms-extensions for defining struct fs_path
2025-12-03Merge tag 'rust-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux Pull Rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Add support for 'syn'. Syn is a parsing library for parsing a stream of Rust tokens into a syntax tree of Rust source code. Currently this library is geared toward use in Rust procedural macros, but contains some APIs that may be useful more generally. 'syn' allows us to greatly simplify writing complex macros such as 'pin-init' (Benno has already prepared the 'syn'-based version). We will use it in the 'macros' crate too. 'syn' is the most downloaded Rust crate (according to crates.io), and it is also used by the Rust compiler itself. While the amount of code is substantial, there should not be many updates needed for these crates, and even if there are, they should not be too big, e.g. +7k -3k lines across the 3 crates in the last year. 'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'. I only modified their code to remove a third dependency ('unicode-ident') and to add the SPDX identifiers. The code can be easily verified to exactly match upstream with the provided scripts. They are all licensed under "Apache-2.0 OR MIT", like the other vendored 'alloc' crate we had for a while. Please see the merge commit with the cover letter for more context. - Allow 'unreachable_pub' and 'clippy::disallowed_names' for doctests. Examples (i.e. doctests) may want to do things like show public items and use names such as 'foo'. Nevertheless, we still try to keep examples as close to real code as possible (this is part of why running Clippy on doctests is important for us, e.g. for safety comments, which userspace Rust does not support yet but we are stricter). 'kernel' crate: - Replace our custom 'CStr' type with 'core::ffi::CStr'. Using the standard library type reduces our custom code footprint, and we retain needed custom functionality through an extension trait and a new 'fmt!' macro which replaces the previous 'core' import. This started in 6.17 and continued in 6.18, and we finally land the replacement now. This required quite some stamina from Tamir, who split the changes in steps to prepare for the flag day change here. - Replace 'kernel::c_str!' with C string literals. C string literals were added in Rust 1.77, which produce '&CStr's (the 'core' one), so now we can write: c"hi" instead of: c_str!("hi") - Add 'num' module for numerical features. It includes the 'Integer' trait, implemented for all primitive integer types. It also includes the 'Bounded' integer wrapping type: an integer value that requires only the 'N' least significant bits of the wrapped type to be encoded: // An unsigned 8-bit integer, of which only the 4 LSBs are used. let v = Bounded::<u8, 4>::new::<15>(); assert_eq!(v.get(), 15); 'Bounded' is useful to e.g. enforce guarantees when working with bitfields that have an arbitrary number of bits. Values can also be constructed from simple non-constant expressions or, for more complex ones, validated at runtime. 'Bounded' also comes with comparison and arithmetic operations (with both their backing type and other 'Bounded's with a compatible backing type), casts to change the backing type, extending/shrinking and infallible/fallible conversions from/to primitives as applicable. - 'rbtree' module: add immutable cursor ('Cursor'). It enables to use just an immutable tree reference where appropriate. The existing fully-featured mutable cursor is renamed to 'CursorMut'. kallsyms: - Fix wrong "big" kernel symbol type read from procfs. 'pin-init' crate: - A couple minor fixes (Benno asked me to pick these patches up for him this cycle). Documentation: - Quick Start guide: add Debian 13 (Trixie). Debian Stable is now able to build Linux, since Debian 13 (released 2025-08-09) packages Rust 1.85.0, which is recent enough. We are planning to propose that the minimum supported Rust version in Linux follows Debian Stable releases, with Debian 13 being the first one we upgrade to, i.e. Rust 1.85. MAINTAINERS: - Add entry for the new 'num' module. - Remove Alex as Rust maintainer: he hasn't had the time to contribute for a few years now, so it is a no-op change in practice. And a few other cleanups and improvements" * tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits) rust: macros: support `proc-macro2`, `quote` and `syn` rust: syn: enable support in kbuild rust: syn: add `README.md` rust: syn: remove `unicode-ident` dependency rust: syn: add SPDX License Identifiers rust: syn: import crate rust: quote: enable support in kbuild rust: quote: add `README.md` rust: quote: add SPDX License Identifiers rust: quote: import crate rust: proc-macro2: enable support in kbuild rust: proc-macro2: add `README.md` rust: proc-macro2: remove `unicode_ident` dependency rust: proc-macro2: add SPDX License Identifiers rust: proc-macro2: import crate rust: kbuild: support using libraries in `rustc_procmacro` rust: kbuild: support skipping flags in `rustc_test_library` rust: kbuild: add proc macro library support rust: kbuild: simplify `--cfg` handling rust: kbuild: introduce `core-flags` and `core-skip_flags` ...
2025-12-03Merge tag 'livepatching-for-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Support both paths where tracefs is typically mounted in selftests - Make old_sympos 0 and 1 equal. They both are valid when there is only one symbol with the given name. * tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests: livepatch: use canonical ftrace path livepatch: Match old_sympos 0 and 1 in klp_find_func()
2025-12-03Merge tag 'sched_ext-for-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext updates from Tejun Heo: - Improve recovery from misbehaving BPF schedulers. When a scheduler puts many tasks with varying affinity restrictions on a shared DSQ, CPUs scanning through tasks they cannot run can overwhelm the system, causing lockups. Bypass mode now uses per-CPU DSQs with a load balancer to avoid this, and hooks into the hardlockup detector to attempt recovery. Add scx_cpu0 example scheduler to demonstrate this scenario. - Add lockless peek operation for DSQs to reduce lock contention for schedulers that need to query queue state during load balancing. - Allow scx_bpf_reenqueue_local() to be called from anywhere in preparation for deprecating cpu_acquire/release() callbacks in favor of generic BPF hooks. - Prepare for hierarchical scheduler support: add scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs, make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in structs for future aux__prog parameter. - Implement cgroup_set_idle() callback to notify BPF schedulers when a cgroup's idle state changes. - Fix migration tasks being incorrectly downgraded from stop_sched_class to rt_sched_class across sched_ext enable/disable. Applied late as the fix is low risk and the bug subtle but needs stable backporting. - Various fixes and cleanups including cgroup exit ordering, SCX_KICK_WAIT reliability, and backward compatibility improvements. * tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits) sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks sched_ext: tools: Removing duplicate targets during non-cross compilation sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs sched_ext: Update comments replacing breather with aborting mechanism sched_ext: Implement load balancer for bypass mode sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked() sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR sched_ext: Add scx_cpu0 example scheduler sched_ext: Hook up hardlockup detector sched_ext: Make handle_lockup() propagate scx_verror() result sched_ext: Refactor lockup handlers into handle_lockup() sched_ext: Make scx_exit() and scx_vexit() return bool sched_ext: Exit dispatch and move operations immediately when aborting sched_ext: Simplify breather mechanism with scx_aborting flag sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode sched_ext: Refactor do_enqueue_task() local and global DSQ paths sched_ext: Use shorter slice in bypass mode sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races sched_ext: Minor cleanups to scx_task_iter ...
2025-12-03Merge tag 'cgroup-for-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Defer task cgroup unlink until after the dying task's final context switch so that controllers see the cgroup properly populated until the task is truly gone - cpuset cleanups and simplifications. Enforce that domain isolated CPUs stay in root or isolated partitions and fail if isolated+nohz_full would leave no housekeeping CPU. Fix sched/deadline root domain handling during CPU hot-unplug and race for tasks in attaching cpusets - Misc fixes including memory reclaim protection documentation and selftest KTAP conformance * tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits) cpuset: Treat cpusets in attaching as populated sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug cgroup/cpuset: Introduce cpuset_cpus_allowed_locked() docs: cgroup: No special handling of unpopulated memcgs docs: cgroup: Note about sibling relative reclaim protection docs: cgroup: Explain reclaim protection target selftests/cgroup: conform test to KTAP format output cpuset: remove need_rebuild_sched_domains cpuset: remove global remote_children list cpuset: simplify node setting on error cgroup: include missing header for struct irq_work cgroup: Fix sleeping from invalid context warning on PREEMPT_RT cgroup/cpuset: Globally track isolated_cpus update cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition cgroup/cpuset: Move up prstate_housekeeping_conflict() helper cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks() cgroup: Defer task cgroup unlink until after the task is done switching out cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free() cgroup: Rename cgroup lifecycle hooks to cgroup_task_*() ...
2025-12-03KEYS: trusted: Use tpm_ret_to_err() in trusted_tpm2Jarkko Sakkinen
Use tpm_ret_to_err() to transmute TPM return codes in trusted_tpm2. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-12-03tpm: Use -EPERM as fallback error code in tpm_ret_to_errJarkko Sakkinen
Using -EFAULT as the tpm_ret_to_err() fallback error code causes makes it incompatible on how trusted keys transmute TPM return codes. Change the fallback as -EPERM in order to gain compatibility with trusted keys. In addition, map TPM_RC_HASH to -EINVAL in order to be compatible with tpm2_seal_trusted() return values. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-12-03tpm: Cap the number of PCR banksJarkko Sakkinen
tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm. Cc: stable@vger.kernel.org # v5.10+ Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array") Tested-by: Lai Yi <yi1.lai@linux.intel.com> Reviewed-by: Jonathan McDowell <noodles@meta.com> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
2025-12-03tpm: Remove tpm_find_get_opsJonathan McDowell
tpm_find_get_ops() looks for the first valid TPM if the caller passes in NULL. All internal users have been converted to either associate themselves with a TPM directly, or call tpm_default_chip() as part of their setup. Remove the no longer necessary tpm_find_get_ops(). Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jonathan McDowell <noodles@meta.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-12-03tpm: add WQ_PERCPU to alloc_workqueue usersMarco Crivellari
Currently if a user enqueues a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") This change adds a new WQ_PERCPU flag to explicitly request alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-12-03tpm_crb: add missing loc parameter to kerneldocStuart Yoder
Update the kerneldoc parameter definitions for __crb_go_idle and __crb_cmd_ready to include the loc parameter. Signed-off-by: Stuart Yoder <stuart.yoder@arm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-12-03tpm_crb: Fix a spelling mistakeChu Guangqing
The spelling of the word "requrest" is incorrect; it should be "request". Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-12-03selftests: tpm2: Fix ill defined assertionsMaurice Hieronymus
Remove parentheses around assert statements in Python. With parentheses, assert always evaluates to True, making the checks ineffective. Signed-off-by: Maurice Hieronymus <mhi@mailbox.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-12-03Merge tag 'wq-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue updates from Tejun Heo: - Rescuer affinity management: Affinity is now updated only when detached using wq_unbound_cpumask consistently. DISASSOCIATED workers also follow unbound cpumask changes to avoid breaking CPU isolation - Rescuer cleanups preparing for fetching work items one by one from pool list: Work assignment factored out, optimized to skip pwqs no longer needing rescue, and shutdown logic simplified - Unused assert_rcu_or_wq_mutex_or_pool_mutex() removed * tag 'wq-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Don't rely on wq->rescuer to stop rescuer workqueue: Only assign rescuer work when really needed workqueue: Factor out assign_rescuer_work() workqueue: Init rescuer's affinities as wq_unbound_cpumask workqueue: Let DISASSOCIATED workers follow unbound wq cpumask changes workqueue: Update the rescuer's affinity only when it is detached workqueue: Remove unused assert_rcu_or_wq_mutex_or_pool_mutex
2025-12-03Merge tag 'printk-for-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Allow creaing nbcon console drivers with an unsafe write_atomic() callback that can only be called by the final nbcon_atomic_flush_unsafe(). Otherwise, the driver would rely on the kthread. It is going to be used as the-best-effort approach for an experimental nbcon netconsole driver, see https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org Note that a safe .write_atomic() callback is supposed to work in NMI context. But some networking drivers are not safe even in IRQ context: https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35 In an ideal world, all networking drivers would be fixed first and the atomic flush would be blocked only in NMI context. But it brings the question how reliable networking drivers are when the system is in a bad state. They might block flushing more reliable serial consoles which are more suitable for serious debugging anyway. - Allow to use the last 4 bytes of the printk ring buffer. - Prevent queuing IRQ work and block printk kthreads when consoles are suspended. Otherwise, they create non-necessary churn or even block the suspend. - Release console_lock() between each record in the kthread used for legacy consoles on RT. It might significantly speed up the boot. - Release nbcon context between each record in the atomic flush. It prevents stalls of the related printk kthread after it has lost the ownership in the middle of a record - Add support for NBCON consoles into KDB - Add %ptsP modifier for printing struct timespec64 and use it where possible - Misc code clean up * tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits) printk: Use console_is_usable on console_unblank arch: um: kmsg_dump: Use console_is_usable drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT lib/vsprintf: Unify FORMAT_STATE_NUM handlers printk: Avoid irq_work for printk_deferred() on suspend printk: Avoid scheduling irq_work on suspend printk: Allow printk_trigger_flush() to flush all types tracing: Switch to use %ptSp scsi: snic: Switch to use %ptSp scsi: fnic: Switch to use %ptSp s390/dasd: Switch to use %ptSp ptp: ocp: Switch to use %ptSp pps: Switch to use %ptSp PCI: epf-test: Switch to use %ptSp net: dsa: sja1105: Switch to use %ptSp mmc: mmc_test: Switch to use %ptSp media: av7110: Switch to use %ptSp ipmi: Switch to use %ptSp igb: Switch to use %ptSp e1000e: Switch to use %ptSp ...
2025-12-03Merge tag 'lkmm.2025.12.01a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull lkmm documentation update from Paul McKenney: - Sort the memory-barriers.txt file's wait_event* and wait_on_bit* list alphabetically * tag 'lkmm.2025.12.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: memory-barriers.txt: Sort wait_event* and wait_on_bit* list alphabetically
2025-12-03Merge branch 'pci/misc'Bjorn Helgaas
- Use max() instead of max_t() to ease static analysis (David Laight) - Add Manivannan Sadhasivam as PCI/pwrctrl maintainer (Bartosz Golaszewski) * pci/misc: MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer PCI: Use max() instead of max_t() to ease static analysis
2025-12-03Merge branch 'pci/pwrctrl-tc9563'Bjorn Helgaas
- Add a struct pci_ops.assert_perst() function pointer to assert/deassert PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya Chundru) - Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch, which must be held in reset after poweron so the pwrctrl driver can configure the switch via I2C before bringing up the links (Krishna Chaitanya Chundru) * pci/pwrctrl-tc9563: PCI: pwrctrl: Add power control driver for TC9563 PCI: qcom: Implement .assert_perst() PCI: dwc: Implement .assert_perst() for dwc glue drivers PCI: Add .assert_perst() to control PCIe PERST# dt-bindings: PCI: Add binding for Toshiba TC9563 PCIe switch
2025-12-03Merge branch 'pci/controller/stm32'Bjorn Helgaas
- Fix a race between link training and endpoint register initialization (Christian Bruel) - Align endpoint allocations to match the ATU requirements (Christian Bruel) - Add #includes to avoid depending on 'proxy' headers (Andy Shevchenko) * pci/controller/stm32: PCI: stm32: Don't use 'proxy' headers PCI: stm32: Fix EP page_size alignment PCI: stm32: Fix LTSSM EP race with start link
2025-12-03Merge branch 'pci/controller/spacemit-k1'Bjorn Helgaas
- Add DT binding and driver for SpacemiT K1 (Alex Elder) * pci/controller/spacemit-k1: PCI: spacemit: Add SpacemiT PCIe host driver dt-bindings: pci: spacemit: Introduce PCIe host controller
2025-12-03Merge branch 'pci/controller/sky1'Bjorn Helgaas
- Add module support for platform controller driver (Manikandan K Pillai) - Split headers into 'legacy' (LGA) and 'high perf' (HPA) (Manikandan K Pillai) - Add DT binding and driver for CIX Sky1 (Hans Zhang) * pci/controller/sky1: MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer PCI: sky1: Add PCIe host support for CIX Sky1 dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings PCI: cadence: Add support for High Perf Architecture (HPA) controller PCI: cadence: Move PCIe RP common functions to a separate file PCI: cadence: Split PCIe controller header file PCI: cadence: Add module support for platform controller driver
2025-12-03Merge branch 'pci/controller/sg2042'Bjorn Helgaas
- Fix sg2042_pcie_remove() reference count issue (Christophe JAILLET) * pci/controller/sg2042: PCI: sg2042: Fix a reference count issue in sg2042_pcie_remove()
2025-12-03Merge branch 'pci/controller/s32g'Bjorn Helgaas
- Add NXP S32G host controller DT binding and driver (Vincent Guittot) * pci/controller/s32g: MAINTAINERS: Add NXP S32G PCIe controller driver maintainer PCI: s32g: Add NXP S32G PCIe controller driver (RC) PCI: dwc: Add register and bitfield definitions dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
2025-12-03Merge branch 'pci/controller/rzg3s-host'Bjorn Helgaas
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea) * pci/controller/rzg3s-host: PCI: Add Renesas RZ/G3S host controller driver dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
2025-12-03Merge branch 'pci/controller/rcar-gen2'Bjorn Helgaas
- Drop ARM dependency so we can build test on other arches (Geert Uytterhoeven) * pci/controller/rcar-gen2: PCI: rcar-gen2: Drop ARM dependency from PCI_RCAR_GEN2
generated by cgit (git 2.34.1) at 2026-01-04 15:16:49 +0000