| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Additional v6.16 updates
A couple more updates on top of the last set I sent you, a new driver
for the ES8375 and a fix for the Cirrus KUnit tests from Jaroslav.
|
|
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
The driver is for codec ES8375 of everest-semi.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.16
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)
Misc changes:
- core: add support for Write Disable-aware SPD
|
|
'arm/smmu/bindings', 'fsl/pamu', 'mediatek', 'renesas/ipmmu', 's390', 'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
Add device tree binding documentation for Everest ES8375
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250523025502.23214-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rewrite the textual description for the WonderMedia I2C controller
as YAML schema, and switch the filename to follow the compatible
string.
The controller only supports two bus speeds (100kHz and 400kHz)
so restrict clock-frequency values accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250506-vt8500-i2c-binding-v3-1-401c3e090a88@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The commit 7e856617a1f3 ("dt-bindings: mmc: Add support for rk3576
eMMC") limited use of power-domains to Rockchip RK3576.
Remove the power-domains: false to allow use of power-domains with more
controllers, e.g. with SDHCI on Rockchip RK3528.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250518220707.669515-6-jonas@kwiboo.se
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Lots of new things, notably:
* ath12k: monitor mode for WCN7850, better 6 GHz regulatory
* brcmfmac: SAE for some Cypress devices
* iwlwifi: rework device configuration
* mac80211: scan improvements with MLO
* mt76: EHT improvements, new device IDs
* rtw88: throughput improvements
* rtw89: MLO, STA/P2P concurrency improvements, SAR
* tag 'wireless-next-2025-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (389 commits)
wifi: mt76: mt7925: add rfkill_poll for hardware rfkill
wifi: mt76: support power delta calculation for 5 TX paths
wifi: mt76: fix available_antennas setting
wifi: mt76: mt7996: fix RX buffer size of MCU event
wifi: mt76: mt7996: change max beacon size
wifi: mt76: mt7996: fix invalid NSS setting when TX path differs from NSS
wifi: mt76: mt7996: drop fragments with multicast or broadcast RA
wifi: mt76: mt7996: set EHT max ampdu length capability
wifi: mt76: mt7996: fix beamformee SS field
wifi: mt76: remove capability of partial bandwidth UL MU-MIMO
wifi: mt76: mt7925: add test mode support
wifi: mt76: mt7925: extend MCU support for testmode
wifi: mt76: mt7925: ensure all MCU commands wait for response
wifi: mt76: mt7925: refine the sniffer commnad
wifi: mt76: mt7925: prevent multiple scan commands
wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init()
wifi: mt76: mt7996: Fix null-ptr-deref in mt7996_mmio_wed_init()
wifi: mt76: mt7925: add RNR scan support for 6GHz
wifi: mt76: add mt76_connac_mcu_build_rnr_scan_param routine
wifi: mt76: scan: Fix 'mlink' dereferenced before IS_ERR_OR_NULL check
...
====================
Link: https://patch.msgid.link/20250522165501.189958-50-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for SIOCETHTOOL ETHTOOL_GET_TS_INFO
- Separate CIS_LINK and BIS_LINK link types
- Introduce HCI Driver protocol
drivers:
- btintel_pcie: Do not generate coredump for diagnostic events
- btusb: Add HCI Drv commands for configuring altsetting
- btusb: Add RTL8851BE device 0x0bda:0xb850
- btusb: Add new VID/PID 13d3/3584 for MT7922
- btusb: Add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: Implement host-wakeup feature
* tag 'for-net-next-2025-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits)
Bluetooth: btintel: Check dsbr size from EFI variable
Bluetooth: MGMT: iterate over mesh commands in mgmt_mesh_foreach()
Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handling
Bluetooth: L2CAP: Fix not checking l2cap_chan security level
Bluetooth: separate CIS_LINK and BIS_LINK link types
Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925
Bluetooth: add support for SIOCETHTOOL ETHTOOL_GET_TS_INFO
Bluetooth: btintel_pcie: Dump debug registers on error
Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields
Bluetooth: ISO: Fix not using SID from adv report
Revert "Bluetooth: btusb: add sysfs attribute to control USB alt setting"
Revert "Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL"
Bluetooth: btusb: Add HCI Drv commands for configuring altsetting
Bluetooth: Introduce HCI Driver protocol
Bluetooth: btnxpuart: Implement host-wakeup feature
dt-bindings: net: bluetooth: nxp: Add support for host-wakeup
Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850
Bluetooth: hci_uart: Remove unnecessary NULL check before release_firmware()
Bluetooth: btmtksdio: Fix wakeup source leaks on device unbind
...
====================
Link: https://patch.msgid.link/20250522171048.3307873-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.16
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939a5 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from "Sheetal ." <sheetal@nvidia.com>:
The patch series includes the necessary changes to enable
support for the Tegra264 platforms in AHUB drivers.
|
|
Convert cdn-dp-rockchip.txt to yaml.
Add new "port@1" property which represents the CDN DP output to keep
the same style as the other display interfaces.
This patch also changes the constraints for "phys" and "extcon". For
the original binding, only one phy and the corresponding extcon can
be specified. In the new binding, one or two phys can be specified.
Since the RK3399 has two DP-USB PHYs, specifying one allows output
via the corresponding PHY, while specifying two lets the driver
choose one PHY for output. This rule also applies to extcon, which
provides the cable state for the corresponding PHY.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250520024718.142-3-kernel@airkyi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add Tegra264 compatible strings to APE subsystem device bindings:
- audio-graph-card: Due to different PLL clock rate.
- admaif: Due to 32 channels supported and register offset changes.
- i2s: Due to 32 channels supported and register offset changes.
- amx/adx: Due to 32 channels supported and register offset changes.
- asrc: Due to different ARAM address.
- ahub: Due to AHUB IPs number of instances updates.
- for future proofing the T264 compatibility is added for other device
nodes.
These bindings enable the enhanced audio features of Tegra264
while maintaining compatibility with existing platforms.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250512051747.1026770-3-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add optional interconnect and iommu properties to admaif yaml. These
properties are supported from Tegra186 SoC onwards.
This fixes below dtbs_check error for Tegra194 and Tegra234:
'interconnect-names', 'interconnects', 'iommus' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Sheetal <sheetal@nvidia.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/20250512051747.1026770-2-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph.yaml already has "routing" property, let's reference it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/875xi4axln.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Aeonsemi PHYs and the requirement of a firmware to correctly work.
Also document the max number of LEDs supported and what PHY ID expose
when no firmware is loaded.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x9410 on C45
registers before the firmware is loaded.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-7-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm Arm64 DeviceTree updates for v6.16
Support for CPU frequency scaling is enabled on the X Elite platform.
Also on X Elite, support for the HP EliteBook Ultra G1q is introduced.
Support for the QCS6490 RB3gen2 Industrial Mezzanine is also added.
PCIe controllers and PHYs are described and enabled across IPQ5018,
IPQ5332, and IPQ5424. On IPQ9474 the missing MHI register range is
added. The TCSR block is described and used to enable download mode
flags on IPQ5018.
The venus video encoder/decoder is enabled on the MSM8998-based Lenovo
Miix 630 laptop.
The crypto engine is enabled on QCM2290 and QCS615. Bluetooth is enabled
on the QCM2210-based RB1 board.
The Fairphone FP5 gains Displayport sound support.
SAR2130P display nodes are added.
On 8cx Gen3 the sensor remoteproc (SLPI) is introduced and this is
enabled on Lenovo Thinkpad X13s and the CRD.
The SDM845-based Samsung Galaxy S9 gains graphics, modem and initial
sound support.
On SDX75 the QPIC BAM and NAND support is added, and these are enabled
on the IDP board.
LLCC is added for SM8750. SM8550 gains Iris video decoder support.
For X Elite, Lenovo ThinkPad T14s support for the SDX62 modem, as well
as audio headset, is added. ASUS Vivobook S 15 gains Bluetooth support,
Microsoft Surface Laptop 7 models gets support for DP over USB Type-C,
HP Omnibook X 14 gains audio support. The devkit gets the USB multiport
controller and the two USB Type-A ports described.
Additionally a variety of Devicetree fixes are introduced, primarily
identified through binding validation.
* tag 'qcom-arm64-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (58 commits)
arm64: dts: qcom: sm4450: Add RPMh power domains support
arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: add retimers, dp altmode support
arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers
arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes
arm64: dts: qcom: sc7280: Mark FastRPC context banks as dma-coherent
arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support
arm64: dts: qcom: sdx75: Add QPIC NAND support
arm64: dts: qcom: sdx75: Add QPIC BAM support
arm64: dts: qcom: qcm2290: Add crypto engine
arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties
arm64: dts: qcom: qcs615: Fix up UFS clocks
arm64: dts: qcom: sa8775p: Clean up the PSCI PDs
arm64: dts: qcom: msm8996-oneplus: Add SLPI VDD_PX
arm64: dts: qcom: sm6350-pdx213: Wire up USB regulators
arm64: dts: qcom: msm8998-yoshino: Add QUSB2PHY VDD supply
arm64: dts: qcom: msm8998-mtp: Add QUSB2PHY VDD supply
arm64: dts: qcom: msm8998-fxtec: Add QUSB2PHY VDD supply
arm64: dts: qcom: qcs615: Remove disallowed property from AOSS_QMP node
arm64: dts: qcom: msm8998: Remove mdss_hdmi_phy phandle argument
...
Link: https://lore.kernel.org/r/20250520024248.38904-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
Additional MediaTek ARM64 DTS updates for v6.16
This addresses devicetree binding warnings happening on the
MDP3 nodes in mt8188 dts, reverts the commit adding the SCP
firmware-name as strongly suggested by Arnd, and also adds
some more late commits.
In particular:
- MT6359 PMIC
- Renamed PMIC RTC node to fix dtbs_check warning
- MT7988(A)
- Support for SPI controllers was added to SoC and BPI-R4
- Support for XSPHY, USB and PCIe2 was added as well
- Fan and cooling maps were added to BPI-R4 machine
- Added BananaPi R4 2G5 machine variant
- MT8365
- Added touchscreen support to MT8365 Genio EVK
- MT8188
- Addressed dtbs_check warnings for MDP3 nodes
- MT8390 (Genio)
- Reverted SCP firmware-name addition
* tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits)
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller
arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes
arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps
arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes
arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi
arm64: dts: mediatek: mt7988: add spi controllers
arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy
arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2
arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4
dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant
arm64: dts: mt6359: Add missing 'compatible' property to regulators node
arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco
arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host
arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight
...
Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board.
New boards:
- Cobra and PP1516 from Theobroma-Systems (build around the PX30)
- Radxa Rock 5B+ (rk3588)
- Rockchip RK3399 industrial eval board
New peripherals:
- GMAC + SDMMC/SDIO on rk3528
- SAI + HDMI-audio on rk3576
Interesting general updates:
- move rk3528 i2c + uart aliases as requested
- rk3568 PCIe3 MSI to use GIC ITS
- update deprecated dwmac reset properties on some px30 boards
- updates for cypress usb hubs on some Theobroma boards
Binding taken with Greg's blessing
https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/
* tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: Improve LED config for NanoPi R5S
arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems
arm64: dts: rockchip: add px30-cobra base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems
arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck
arm64: dts: rockchip: add basic mdio node to px30
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma
arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma
dt-bindings: usb: cypress,hx3: Add support for all variants
arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files
arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588
arm64: dts: rockchip: Add RK3562 evb2 devicetree
arm64: dts: rockchip: add core dtsi for RK3562 SoC
dt-bindings: arm: rockchip: Add rk3562 evb2 board
dt-bindings: soc: rockchip: Add rk3562 syscon compatibles
dt-bindings: rockchip: pmu: Add rk3562 compatible
arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C
arm64: dts: rockchip: Add GMAC nodes for RK3528
...
Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.16
Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices:
- Radxa Cubie A5E
- X96Q-Pro+
- Avaota-A1
Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1.
Note: the SoC has two different ethernet controllers.
Changes to existing SoCs:
- Enable GPU on H616 with all boards enabled
- Set maximum MMC frequency for the A100
Changes to existing boards:
- Add WiFi/BT header on PINE64 A64 boards
- Add hp-det-gpios for Anbernic RG35XX
- Add support for PHY LEDs on Bananapi (the original one)
Add new devices for existing SoCs:
- YuzukiHD Chameleon based on H6
- Liontron H-A133L based on A133 (compatible with A100)
Tree wide cleanups:
- Use preferred node names for cooling maps
- Align wifi node name with bindings
- Drop spurious 'clock-latency-ns' properties for H5 & H6
* tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a100: add Liontron H-A133L board support
dt-bindings: arm: sunxi: Add Liontron H-A133L board name
dt-bindings: vendor-prefixes: Add Liontron name
ARM: dts: bananapi: add support for PHY LEDs
arm64: dts: allwinner: a100: set maximum MMC frequency
arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board
arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board
arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC
dt-bindings: sram: sunxi-sram: Add A523 compatible
arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard
arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64
arm64: dts: allwinner: correct the model name for Radxa Cubie A5E
ARM: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: h616: enable Mali GPU for all boards
arm64: dts: allwinner: h616: Add Mali GPU node
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties
arm/arm64: dts: allwinner: Use preferred node names for cooling maps
arm64: dts: allwinner: h616: add YuzukiHD Chameleon support
...
Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.16, round 1
Highlights:
----------
- MCU:
- Add low power timer on STM32F746
- Add STM32H747 High end MCU support. It embeds:
- dual-core (Cortex-M7 + Cortex-M4)
- up to 2 Mbytes flash
- 1 Mbyte of internal RAM
- Add STM32H747i-disco board support. Detailed information can be
found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
- MPU:
- STM32MP13:
- Add VREFINT calibration support based on ADC.
- STMP32MP15:
- Add new Ultratronik Fly board support:
- based on STM32MP157C SoC
- 1GB of DDR3
- Several connections are available on this boards:
2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
- STM32MP25:
- Add OCTOSPI support on STM32MP25 SoCs
- Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1
- Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use
LPTIM3 as low power broadcast timer on STM32MP257F-EV1.
* tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board
MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT
dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding
dt-bindings: vendor-prefixes: Add Ultratronik
arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1
arm64: dts: st: add low-power timer nodes on stm32mp251
arm64: defconfig: enable STM32 LP timer clockevent driver
arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board
arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add OMM node on stm32mp251
ARM: dts: stm32: support STM32h747i-disco board
ARM: dts: stm32: add an extra pin map for USART1 on stm32h743
ARM: dts: stm32: add pin map for UART8 controller on stm32h743
ARM: dts: stm32: add uart8 node for stm32h743 MCU
dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK
ARM: stm32: add a new SoC - STM32H747
dt-bindings: arm: stm32: add compatible for stm32h747i-disco board
ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles
ARM: dts: st: stm32: Align wifi node name with bindings
ARM: dts: stm32: add low power timer on STM32F746
...
Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.16
- Add clock driver, fix for pinctrl/uart
- Add gpio support, enable LED heartbeat
* tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: add gpio LED for system heartbeat
riscv: dts: spacemit: add gpio support for K1 SoC
riscv: dts: spacemit: Acquire clocks for UART
riscv: dts: spacemit: Acquire clocks for pinctrl
riscv: dts: spacemit: Add clock tree for SpacemiT K1
dt-bindings: clock: spacemit: Add spacemit,k1-pll
dt-bindings: soc: spacemit: Add spacemit,k1-syscon
Link: https://lore.kernel.org/r/20250514044841-GYA524674@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
VT8500 DTS ARM changes for v6.16
1. New board: VIA APC Rock/Paper.
2. Add SCC ID register/socinfo node.
3. List all timer interrupts.
* tag 'dt-vt8500-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: vt8500: list all four timer interrupts
ARM: dts: vt8500: add DT nodes for the system config ID register
ARM: dts: vt8500: Add VIA APC Rock/Paper board
dt-bindings: arm: vt8500: Add VIA APC Rock/Paper boards
Link: https://lore.kernel.org/r/20250513104216.25803-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.16
The Snapdragon X Plus platform and related reference device is
introduced. Devicetree for the Xiaomi Redmi Note 8 is added.
Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains
1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and
buttons, while the IPQ9574 gains NSS clock controller and SPI NAND
support.
IPQ6018 SMEM is transitioned to be described directly in the
reserved-memory node.
Display and GPU are enabled in the QCM6490-based Fairphone FP5. On
QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and
Bluetooth is enabled. The USB Type-C orientation GPIO is added on the
QCS6490 Rb3Gen2 and the vision mezzanine is described.
The Fairphone FP5 gains touchscreen and USB Type-C display support, and
the QCM6490 IDP board gains a required listed of protected clocks.
The camera subsystem in SC7280 is described and UFS is transitioned to
use operating points.
On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the
UART pinctrl state is cleaned up.
The MSM8953 platform gains another UART and interconnects.
On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling
interrupts are added.
Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for
charging, fuel gauge, haptic, and LED, as well as the PMIC used for
display and touchscreen, which then is used to enable the touchscreen.
The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display
backlight control.
Display and GPU are enabled for the Nothing Phone (1).
QCS615 platform gains command DB definition.
The QCS8300 platform gains description of more QUP instances, CPUfreq,
PCIe SMMU and the SPMI controller.
On SAR2130P PCIe EP device nodes are added.
On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem
is enabled, and firmware-path are defined on ADSP and WCNSS.
The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP
enabled, and the vision mezzanine on both gets their CMA configuration
cleaned up. Xiaomi Pocophone F1 gains touchscreen support.
On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are
described.
On SM8450 the PCIe endpoint controller is described.
For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh
sleep stats.
SM8650 gians OSM L3 scaling and variety of OPP tables and missing
interconnect definitions. The thermal trip points for CPU cores and GPU
are raised in reliance on hardware throttling.
SM8650 is also transitioned to per-CPU interrupt partitions, in order to
properly describe the PMU interrupts. Missing Coresight ETE instances
are added.
On SM8750 the cluster idle states are corrected, then audio and compute
DSPs are introduced, together with the crypto and rng blocks. Modem
support is added and enabled on MTP and QRD devices.
On SC8280XP overlays are introduced for those running Linux at EL2 on
these devices. A few more temp-alarm instances are added for the PMICs.
On the X Elite platform GPU cooling and watchdog is introduced, together
with a number of smaller fixes. Dell XPS13 gains support for USB Type-C
display, the QCP gains WiFi/BT power sequence, and a few devices learns
about HBR3. The RTC support is enabled and regulators that are feeding
resources that should be always on is marked as such on a variety of
boards.
The Lenovo Thinkpad T14s DeviceTree is split in two, in order to
describe the LCD and OLED variants.
Missing properties for the crypto BAM is introduced on a variety of
platforms, taking care of a long standing error message in the kernel
log during boot.
DSI phy clock ids are transitioned to use identifiers from the PHY
header file and VBIF region size is corrected, across a large number of
platforms.
A couple of DWC3 quirks are added across a lot of platforms.
The arm32-for-6.15 pull request was accidentally merged into the
arm64-for-6.16 branch and this wasn't discovered until a significant
number of commits would have to be rebased. As such this is kept here as
well.
* tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits)
arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
arm64: dts: qcom: qcs8300: add the pcie smmu node
arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override
arm64: dts: qcom: msm8953: Add interconnects
arm64: dts: qcom: msm8953: Add uart_5
arm64: dts: qcom: sm8350: Use q6asm defines for reg
arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg
arm64: dts: qcom: sdm850*: Use q6asm defines for reg
arm64: dts: qcom: sdm845*: Use q6asm defines for reg
arm64: dts: qcom: sc7280: Use q6asm defines for reg
arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg
arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg
arm64: dts: qcom: msm8996*: Use q6asm defines for reg
arm64: dts: qcom: msm8953: Use q6asm defines for reg
arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg
arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg
arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C
arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch
...
Link: https://lore.kernel.org/r/20250511235241.15192-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.16
Allow HP EliteBook Ultra G1q to use QSSECOM for UEFI variable acecss.
Add missing compatible for IPQ5018 TCSR block. Fix a kernel-doc warning
in SCM driver.
* tag 'qcom-drivers-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
docs: firmware: qcom_scm: Fix kernel-doc warning
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
Link: https://lore.kernel.org/r/20250520024916.39712-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V cache drivers for v6.16
SiFive:
Add support for the Eswin EIC7700 SoC, which needs to make sure of the
non-standard cache-ops provided by the ccache driver.
Bindings:
Conversions for two Marvell bindings to yaml, and additions of two
soc-specific compatibles to the axm45mp bindings.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-cache-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
dt-bindings: cache: add QiLai compatible to ax45mp
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
dt-bindings: cache: add specific RZ/Five compatible to ax45mp
cache: sifive_ccache: Add ESWIN EIC7700 support
dt-bindings: cache: sifive,ccache0: Add ESWIN EIC7700 SoC compatibility
Link: https://lore.kernel.org/r/20250516-liability-facility-667fc14a2a85@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16, part two
Add CPU hotplug support on Google GS101 by toggling respective bits in
secondary PMU intr block (Power Management Unit (PMU) Interrupt
Generation) from the main PMU driver.
* tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add "samsung,exynosautov920-spi" dedicated compatible for
SPI found in ExynosAutov920 SoC.
Signed-off-by: Faraz Ata <faraz.ata@samsung.com>
Link: https://patch.msgid.link/20250521084324.2759530-1-faraz.ata@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
I've used several email addresses and a previous name to contribute.
Consolidate all of these to my primary email and update my name.
Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
into soc/drivers
RISC-V SoC for v6.16
Sophgo:
Add support for SG2044 TOP syscon device. The SG2044 TOP
device provide PLL clock function in its area.
Add RTC support for CV1800 series SoC. The device
is called RTC, but contains control registers of other
HW blocks in its address space, most notably of
Power-on-Reset (PoR) module, DW8051 IP (MCU core),
accompanying SRAM, hence putting it in SoC subsystem.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-soc-for-v6.16' of https://github.com/sophgo/linux:
soc: sophgo: cv1800: rtcsys: New driver (handling RTC only)
dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series
soc: sophgo: sg2044: Add support for SG2044 TOP syscon device
Link: https://lore.kernel.org/r/MA0P287MB2262B041A26A0F5EAD1E296CFE91A@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.16
Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14,
and block list TZMEM on the SM7150 platform to avoid issues with rmtfs.
Extend the last-level cache (llcc) driver to support version 6 of the
hardware and enable SM8750 support.
Also add socinfo for the SM8750 platform.
Re-enable UCSI support on SC8280XP, now that the reported crash has been
dealt with, and filter the altmode notifications to avoid spurious
hotplug events being propagated to user space.
Add SM7150 support to pd-mapper.
* tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: llcc-qcom: Add support for SM8750
soc: qcom: llcc-qcom: Add support for LLCC V6
dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block
soc: qcom: socinfo: add SM8750 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for SM8750
dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties
dt-bindings: soc: qcom,rpm: add missing clock-controller node
soc: qcom: smem: Update max processor count
firmware: qcom: tzmem: disable sm7150 platform
soc: qcom: pd-mapper: Add support for SM7150
soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events
soc: qcom: smp2p: Fix fallback to qcom,ipc parse
soc: qcom: pmic_glink: enable UCSI on sc8280xp
firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14
dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement
Link: https://lore.kernel.org/r/20250513215656.44448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/drivers
VT8500 (and FSL) SoC drivers for v6.16
1. VT8500: Add SCC socinfo/hwinfo driver.
2. Cleanup unused function in PowerPC Freescale QE driver to have W=1
builds warnings free.
* tag 'soc-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
soc: fsl: qe: remove unused qe_ic_from_irq function
ARM: vt8500: MAINTAINERS: Include vt8500 soc driver in maintainers entry
soc: Add VIA/WonderMedia SoC identification driver
dt-bindings: hwinfo: Add VIA/WonderMedia SoC identification
Link: https://lore.kernel.org/r/20250513104216.25803-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic Driver for v6.16:
- Amlogic clk measure memory usage optimization
- Amlogic clk measure support for S4 & C3 Socs
- Amlogic A4/A5 reset controller bindings
* tag 'amlogic-driver-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
dt-bindings: reset: Add compatible for Amlogic A4/A5 Reset Controller
soc: amlogic: clk-measure: Add support for S4
soc: amlogic: clk-measure: Add support for C3
dt-bindings: soc: amlogic: S4 supports clk-measure
dt-bindings: soc: amlogic: C3 supports clk-measure
soc: amlogic: clk-measure: Define MSR_CLK's register offset separately
soc: amlogic: clk-measure: Optimize the memory size of clk-measure
Link: https://lore.kernel.org/r/04908842-4c55-44a0-b74c-3aca82a1f204@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT for v6.16:
- Amlogic A4 Pinctrl support
- UART RX/TX pull-up pinconf properties for all SoCs
- SARADC support for the S905L SoC variant
- Drop clock-latency in CPU node
- Amlogic clk measure support for S4 & C3 Socs
- Amlogic S6/S7/S7D initial support
- I2C default pull-up bias pinconf property on Amlogic GXL based boards
- Amlogic A4 & A5 Reset Controller support
- New Boards:
- Amlogic S6 BL209 Reference Board
- Amlogic S7 BP201 Reference Board
- Amlogic S7D BM202 Reference Board
- Amlogic S805Y xiaomi-aquaman/Mi TV Stick
* tag 'amlogic-arm64-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (21 commits)
arm64: dts: amlogic: Add A5 Reset Controller
arm64: dts: amlogic: Add A4 Reset Controller
arm64: dts: amlogic: add support for xiaomi-aquaman/Mi TV Stick
dt-bindings: arm: amlogic: add S805Y and Mi TV Stick
arm64: dts: amlogic: gxl: set i2c bias to pull-up
arm64: dts: add support for S7D based Amlogic BM202
arm64: dts: add support for S7 based Amlogic BP201
arm64: dts: add support for S6 based Amlogic BL209
dt-bindings: arm: amlogic: add S7D support
dt-bindings: arm: amlogic: add S7 support
dt-bindings: arm: amlogic: add S6 support
arm64: dts: amlogic: S4: Add clk-measure controller node
arm64: dts: amlogic: C3: Add clk-measure controller node
arm64: dts: amlogic: Drop redundant CPU "clock-latency"
arm64: dts: amlogic: gxlx-s905l-p271: add saradc compatible
arm64: dts: amlogic: a1: enable UART RX and TX pull up by default
arm64: dts: amlogic: axg: enable UART RX and TX pull up by default
arm64: dts: amlogic: g12: enable UART RX and TX pull up by default
arm64: dts: amlogic: gxl: enable UART RX and TX pull up by default
arm64: dts: amlogic: gxbb: enable UART RX and TX pull up by default
...
Link: https://lore.kernel.org/r/5f7d3fa4-2d9d-450b-b384-abdd903284dc@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT for v6.16:
- UART RX/TX pull-up pinconf properties for all SoCs
- New Boards:
- Meson8 TCU Fernsehfee 3.0
* tag 'amlogic-arm-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8-fernsehfee3: Describe regulators
ARM: dts: amlogic: Add TCU Fernsehfee 3.0
dt-bindings: arm: amlogic: Add TCU Fernsehfee 3.0 board
dt-bindings: vendor-prefixes: Add TC Unterhaltungselektronik AG
ARM: dts: amlogic: meson8b: enable UART RX and TX pull up by default
ARM: dts: amlogic: meson8: enable UART RX and TX pull up by default
Link: https://lore.kernel.org/r/838c5305-5c5b-4232-b7fe-86598dc50ace@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.16
1. Tesla FSD: Add Ethernet.
2. ExynosAutov920: Add more serial nodes, clock controllers for CPU
cluster CL0, CL1 and CL2.
3. New Exynos7870 SoC with pretty decent coverage: pin controllers,
clock controllers, I2C, MMC, serial and USB. New boards using
Exynos7870: Samsung Galaxy J7 Prime, Samsung Galaxy A2 Core and
Samsung Galaxy J6.
4. Google GS101: Add pmu-intr-gen syscon node for proper CPU hotplug.
5. Switch USI (serial engines) nodes to new samsung,mode constant coming
with DT bindings v6.15-rc1.
* tag 'samsung-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: add pmu-intr-gen syscon node
arm64: dts: exynos: add initial support for Samsung Galaxy J6
arm64: dts: exynos: add initial support for Samsung Galaxy A2 Core
arm64: dts: exynos: add initial support for Samsung Galaxy J7 Prime
arm64: dts: exynos: add initial devicetree support for exynos7870
dt-bindings: arm: samsung: add compatibles for exynos7870 devices
arm64: dts: exynosautov920: add cpucl1/2 clock DT nodes
arm64: dts: exynosautov920: add cpucl0 clock DT nodes
arm64: dts: exynos: Add DT node for all UART ports
arm64: dts: exynos: update all samsung,mode constants
arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC
arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC
Link: https://lore.kernel.org/r/20250513101023.21552-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.16
* Add T-HEAD TH1520 and Renesas RZ/V2H(P) USB2PHY reset controller
drivers.
* Add devm_reset_control_array_get_exclusive_released() variant to allow
using the acquire/release hand-off mechanism for exclusive reset
controls bundled into reset control arrays.
* Add Sophgo SG2044 reset controller to device tree bindings.
* tag 'reset-for-v6.16' of git://git.pengutronix.de/pza/linux:
dt-bindings: reset: sophgo: Add SG2044 bindings.
MAINTAINERS: Add entry for Renesas RZ/V2H(P) USB2PHY Port Reset driver
reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)
dt-bindings: reset: Document RZ/V2H(P) USB2PHY reset
reset: Add devm_reset_control_array_get_exclusive_released()
reset: thead: Add TH1520 reset controller driver
dt-bindings: reset: Add T-HEAD TH1520 SoC Reset Controller
Link: https://lore.kernel.org/r/20250513092516.3331585-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.16
Generic Fixups/Cleanups:
* am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot
SoC Specific features and Fixes:
AM62Ax:
* C7x and R5F support added
* Bug fix for emmc clock to point to default
* CPUFreq thermal throttling on thermal alert
AM62P5:
* Add RNG Node (common to J722s)
* Bug fix for emmc clock to point to default (common to J722S)
AM625:
* Wakeup R5 node
* Bug fix for emmc clock to point to default
* PRUSS-M support
* New GPU bindings
AM64:
* Switch to 64-bit address space for PCIe0
* Add PCIe control nodes for main_conf region
* Reserve timer nodes used by MCU F/w.
AM65:
* MMC: Add missing delay timing values for SDR and legacy modes
* Add compatible for AM65x syscon and PCIe control properties
(dtbs_check fixes)
J7200:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J721E:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1.
J721S2:
* GPU node for Imagination Tech Rouge BXS GPU.
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J722s/AM67A:
* Switch serdes status to be enabled by board file than at SoC level.
* Switch to 64-bit address space for PCIe0.
J784S4/J742S2/AM69:
* Add ASPCIE0 and enable output for PCIe1
* Fix length of serdes_ln_ctrl.
* Switch to 64-bit address space for PCIe0,1.
Board Specific:
AM62Ax:
* SK: co-processors C7x, R5, PWM support added
* phycore-som: co-processors C7x, R5
AM62P5:
* Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support.
* SK: Add remote processor support, PWM
AM625:
* Add BeagleBoard.org PocketBeagle-2 support
* phycore-som: Enable R5F support
* Verdin: Add eeprom compatible fallback
* SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays
(dtbs_check fixes)
* BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes)
* phyboard-lyra: Add cooling maps for fan
* emmc bug fixes: add non-removable flag for eMMC.
AM65:
* EVM: Add missing power supply description ofr Rocktech panel
(dtbs_check fixes)
J721E:
* EVM: Enable OSPI1
* EVM/SK: Dt nodes description for mandatory power suplpies for panel and
sensors (dtbs_check fixes)
J721S2/AM68:
* Add phyBOARD-Izar-AM68x
* am68-SK: Fix regulator hierarchy
J722s/AM67A:
* EVM: Add mux controls for CSI2, power regulator nodes and add overlays for
quad IMX219 and TEVI OV5640.
* BeagleY-AI: Add bootph for main_gpio1
J784S4/J742S2/AM69:
* usxgmii expansion board: Drop un-necessary pinctrl-names
* evm: Add overlay for USB0 Type-A option
* tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (86 commits)
arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640
arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219
arm64: dts: ti: j722s-evm: Add MUX to control CSI2RX
arm64: dts: ti: j722s-evm: Add DT nodes for power regulators
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps
arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert
arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E
arm64: dts: ti: k3-j721s2: Add GPU node
arm64: dts: ti: k3-am62: New GPU binding details
arm64: dts: ti: k3-am62-main: Add PRUSS-M node
arm64: dts: ti: k3-am64: Reserve timers used by MCU FW
arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors
arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
...
Link: https://lore.kernel.org/r/20250512144807.yn64klchtmjjl6ac@protrude
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert the clock device tree bindings to yaml for the Altera SoCFPGA
Cyclone5, Arria5, and Arria10 chip families. Since the clock nodes are
subnodes to Altera SOCFPGA Clock Manager, the yaml was added to
socfpga-clk-manager.yaml.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add optional ngpios and gpio-reserved-ranges property.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250520-gpio-dts-v3-1-04771c6cf325@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The yaml has "hp-det-gpios" property, but Audio-Graph-Card2 can handle
"mic-det-gpios" too. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/877c2kaxn4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for host wakeup on interrupt.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Document support for the CAN-FD Interface on the RZ/G3E (R9A09G047) SoC,
which supports up to six channels.
The CAN-FD module on RZ/G3E is very similar to the one on both R-Car V4H
and RZ/G2L, but differs in some hardware parameters:
* No external clock, but instead has ram clock.
* Support up to 6 channels.
* 20 interrupts.
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
RZ/G3E SoC has 20 interrupts, 2 resets and 6 channels that need more
branching with conditional schema. Simplify the conditional schema with
if statements rather than the complex if-else statements to prepare for
supporting RZ/G3E SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-2-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Document the UFS Controller on the SM8750 Platform.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-sm8750_ufs_master-v3-1-bad1f5398d0a@oss.qualcomm.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Allow to inherit valid properties from the dsi-controller. This fixes the
following warning when adding a panel property:
rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
match any of the regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
Also add a panel property to the example.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250520151112.3278569-1-hugo@hugovil.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add sgx,vz89te part number since it is similar to sgx,vz89x,
which is documented in trivial-devices.yaml.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250515000225.79239-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
This adds a compatible string for the SPI controller on RK3528.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250520100102.1226725-2-amadeus@jmu.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new compatible for Bananapi R4 with 2.5G phy.
Base board is compatible with existing BPI-R4 only 1 SFP is replaced
by RJ45 port and use mt7988 internal phy.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-2-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
