| Age | Commit message (Collapse) | Author |
|---|
|
Drop 'fadvise()' from the doc, since fadvise() has no HUGEPAGE advise
currently.
Link: https://lkml.kernel.org/r/3a10bb49832f6d9827dc2c76aec0bf43a892876b.1732779148.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update the large folios policy for tmpfs and shmem.
Link: https://lkml.kernel.org/r/9b7418af30e300d1eb05721b81d79074d0bb0ec9.1732779148.git.baolin.wang@linux.alibaba.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now the tmpfs can allow to allocate any sized large folios, and the default
huge policy is still preferred to be 'never'. Due to tmpfs not behaving like
other file systems in some cases as previously explained by David[1]:
: I think I raised this in the past, but tmpfs/shmem is just like any
: other file system .. except it sometimes really isn't and behaves much
: more like (swappable) anonymous memory. (or mlocked files)
:
: There are many systems out there that run without swap enabled, or with
: extremely minimal swap (IIRC until recently kubernetes was completely
: incompatible with swapping). Swap can even be disabled today for shmem
: using a mount option.
:
: That's a big difference to all other file systems where you are
: guaranteed to have backend storage where you can simply evict under
: memory pressure (might temporarily fail, of course).
:
: I *think* that's the reason why we have the "huge=" parameter that also
: controls the THP allocations during page faults (IOW possible memory
: over-allocation). Maybe also because it was a new feature, and we only
: had a single THP size.
Thus adding a new command line to change the default huge policy will be
helpful to use the large folios for tmpfs, which is similar to the
'transparent_hugepage_shmem' cmdline for shmem.
[1] https://lore.kernel.org/all/cbadd5fe-69d5-4c21-8eb8-3344ed36c721@redhat.com/
Link: https://lkml.kernel.org/r/ff390b2656f0d39649547f8f2cbb30fcb7e7be2d.1732779148.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add HW Steering mode to mlx5 devlink param of steering mode options.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add interconnect support for SM8750 SoC.
The Qualcomm Technologies, Inc. SM8750 SoC is the latest in the line of
consumer mobile device SoCs.
* icc-sm8750
dt-bindings: interconnect: add interconnect bindings for SM8750
interconnect: qcom: Add interconnect provider driver for SM8750
interconnect: sm8750: Add missing const to static qcom_icc_desc
Link: https://lore.kernel.org/r/20241204-sm8750_master_interconnects-v3-0-3d9aad4200e9@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Document the SM8750 BWMONs, which has one instance per cluster of
BWMONv4.
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Link: https://lore.kernel.org/r/20250113-sm8750_bwmon_master-v1-1-f082da3a3308@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
After commit 38f83090f515 ("cpuidle: menu: Remove iowait influence") and
other previous changes, the description of the menu governor in the
documentation does not match the code any more, so update it as
appropriate.
Fixes: 38f83090f515 ("cpuidle: menu: Remove iowait influence")
Fixes: 5484e31bbbff ("cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases")
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/12589281.O9o76ZdvQC@rjwysocki.net
|
|
Add documentation on how hibernation works in a guest VM on Hyper-V.
Describe how VMBus devices and the VMBus itself are hibernated and
resumed, along with various limitations.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250113145645.1320942-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250113145645.1320942-1-mhklinux@outlook.com>
|
|
Document the OSM L3 found in the Qualcomm SM8650 platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250110-topic-sm8650-ddr-bw-scaling-v1-1-041d836b084c@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Document QCS615 BWMONs, which includes one BWMONv4 instance for CPU to
LLCC path bandwidth monitoring and one BWMONv5 instance for LLCC to DDR
path bandwidth monitoring.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241218-add_bwmon_support_for_qcs615-v1-1-680d798a19e5@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Tags are really appreciated by maintainers in general, since it means
someone is willing to put their name on a commit, be it as a reviewer,
tester, etc.
However, signers (i.e. submitters carrying tags from previous versions
and maintainers applying patches) may need to take or drop tags, on a
case-by-case basis, for different reasons.
Yet this is not explicitly spelled out in the documentation, thus there
may be instances [1] where contributors may feel unwelcome.
Thus, to clarify, state this clearly.
Link: https://lore.kernel.org/rust-for-linux/CAEg-Je-h4NitWb2ErFGCOqt0KQfXuyKWLhpnNHCdRzZdxi018Q@mail.gmail.com/ [1]
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250112152946.761150-4-ojeda@kernel.org
|
|
Newcomers to the kernel need to learn the different tags that are
used in commit messages and when to apply them. Acked-by is sometimes
misunderstood, since the documentation did not really clarify (up to
the previous commit) when it should be used, especially compared to
Reviewed-by.
The previous commit already clarified who the usual providers of Acked-by
tags are, with examples. Thus provide a clarification paragraph for
the comparison with Reviewed-by, and give a couple examples reusing the
cases given above, in the previous commit.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250112152946.761150-3-ojeda@kernel.org
|
|
Acked-by is typically used by maintainers. However, sometimes it is
useful to be able to accept the tag from other stakeholders that may not
have done a deep technical review or may not be kernel developers. For
instance:
- People with domain knowledge, such as the original author of the
code being modified.
- Userspace-side reviewers for a kernel uAPI patch, like in DRM --
see Documentation/gpu/drm-uapi.rst:
> The userspace-side reviewer should also provide an Acked-by on the
> kernel uAPI patch indicating that they believe the proposed uAPI
> is sound and sufficiently documented and validated for userspace's
> consumption.
- Key users of a feature, such as in [1].
Thus clarify that Acked-by may be used by other stakeholders (but most
commonly by maintainers).
Since, in these cases, it may be confusing why an Acked-by is/was
provided, allow and suggest to provide a "# Suffix" explaining it.
The "# Suffix" for Acked-by is already being used to clarify what part
of the patch a maintainer is acknowledging, thus also mention "# Suffix"
in the relevant paragraph.
Link: https://lore.kernel.org/rust-for-linux/CANiq72m4fea15Z0fFZauz8N2madkBJ0G7Dc094OwoajnXmROOA@mail.gmail.com/ [1]
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250112152946.761150-2-ojeda@kernel.org
|
|
At the bottom of the bug-hunting.rst file there is a "signature" which
doesn't seem to make much sense. It seems to predate git, and perhaps
was from an earlier bug report that got copied into the document, but
now makes no sense so remove it.
Cc: greg@wind.rmcc.com
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alex Shi <alexs@kernel.org>
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/2025011005-resistant-uncork-9814@gregkh
|
|
Translate lwn/Documentation/security/sak.rst into Chinese
Update the translation through commit 4d3beaa06d35
("docs: security: move some books to it and update")
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Alex Shi <alexs@kernel.org>
Signed-off-by: zhangwei <zhangwei@cqsoftware.com.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250110100405.2225-1-zhangwei@cqsoftware.com.cn
|
|
The arm64 'memory.rst' file tries to document the virtual memory map
and the translation procedure for a couple of kernel configurations.
Unfortunately, the virtual memory map changes relatively frequently and
we support considerably more configurations than we did when the docs
were introduced (e.g. we now have support for 16KiB pages and 52-bit
addressing). Furthermore, the Arm ARM is the definitive resource for the
translation procedure and so there's little point in duplicating part
of that information in the kernel documentation.
Rather than continue trying (and failing) to maintain these diagrams,
let's rip them out. The kernel page-table can be dumped using
CONFIG_PTDUMP_DEBUGFS if necesssary.
Link: https://lore.kernel.org/r/20250102065554.1533781-1-sangmoon.kim@samsung.com
Reported-by: Sangmoon Kim <sangmoon.kim@samsung.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add samsung,exynos8895-dw-mshc-smu specific compatible to the bindings
documentation. Since Samsung, as usual, likes reusing devices from older
designs, use the samsung,exynos7-dw-mshc-smu compatible.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20250105161344.420749-2-ivo.ivanov.ivanov1@gmail.com/
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There are two MQS instances on the i.MX943 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
As one instance is in the always-on domain, another is in the
wakeup domain, so the compatible strings are
"fsl,imx943-aonmix-mqs", "fsl,imx943-wakeupmix-mqs".
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250113090321.3193464-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
imx31.dtsi uses the following RTC compatible:
compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
Document 'fsl,imx31-rtc' to fix the following dt-schema warning:
'fsl,imx31-rtc' is not one of ['fsl,imx1-rtc', 'fsl,imx21-rtc']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20250112134027.1013213-1-festevam@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This is for the MPC831{4,5}{,E} SoCs.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250102-mpc83xx-v1-11-86f78ba2a7af@posteo.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
From looking at the data sheets, it is not obvious that CS# and latch
clock can be treated at the same, but doing so works fine and saves the
hassle of (1) trying to specify a SPI device without CS, and (2) adding
another property to drive the latch clock[1].
[1]: https://lore.kernel.org/lkml/20241213-gpio74-v1-2-fa2c089caf41@posteo.net/
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241224-gpio74-v2-3-bbcf14183191@posteo.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We need the serial driver fixes in here to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the debugfs / driver-core fixes in here as well for testing and
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Static devm_usb_phy_match() is only called by API devm_usb_put_phy(), and
the API has no caller now.
Remove the API and the static function.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250112-remove_api-v1-1-49cc8f792ac9@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delay accounting can now calculate the average delay of processes, detect
the overall system load, and also record the 'delay max' to identify
potential abnormal delays. However, 'delay min' can help us identify
another useful delay peak. By comparing the difference between 'delay
max' and 'delay min', we can understand the optimization space for
latency, providing a reference for the optimization of latency
performance.
Use case
=========
bash-4.4# ./getdelays -d -t 242
print delayacct stats ON
TGID 242
CPU count real total virtual total delay total delay average delay max delay min
39 156000000 156576579 2111069 0.054ms 0.212296ms 0.031307ms
IO count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
SWAP count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
RECLAIM count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
THRASHING count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
COMPACT count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
WPCOPY count delay total delay average delay max delay min
156 11215873 0.072ms 0.207403ms 0.033913ms
IRQ count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
Link: https://lkml.kernel.org/r/20241220173105906EOdsPhzjMLYNJJBqgz1ga@zte.com.cn
Co-developed-by: Wang Yong <wang.yong12@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Co-developed-by: Kun Jiang <jiang.kun2@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: tuqiang <tu.qiang35@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
- Replace "they" with "you" where "you" is used in the preceding
sentence fragment.
- Mention `xa_erase` in discussion of multi-index entries. Split this
into a separate sentence.
- Add "call" parentheses on "xa_store" for consistency and
linkification.
- Add caveat that `xa_store` and `xa_erase` are not equivalent in the
presence of `XA_FLAGS_ALLOC`.
Link: https://lkml.kernel.org/r/20241105-xarray-documentation-v5-1-8e1702321b41@gmail.com
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce the use cases of delay max, which can help quickly detect
potential abnormal delays in the system and record the types and specific
details of delay spikes.
Problem
========
Delay accounting can track the average delay of processes to show
system workload. However, when a process experiences a significant
delay, maybe a delay spike, which adversely affects performance,
getdelays can only display the average system delay over a period
of time. Yet, average delay is unhelpful for diagnosing delay peak.
It is not even possible to determine which type of delay has spiked,
as this information might be masked by the average delay.
Solution
=========
the 'delay max' can display delay peak since the system's startup,
which can record potential abnormal delays over time, including
the type of delay and the maximum delay. This is helpful for
quickly identifying crash caused by delay.
Use case
=========
bash# ./getdelays -d -p 244
print delayacct stats ON
PID 244
CPU count real total virtual total delay total delay average delay max
68 192000000 213676651 705643 0.010ms 0.306381ms
IO count delay total delay average delay max
0 0 0.000ms 0.000000ms
SWAP count delay total delay average delay max
0 0 0.000ms 0.000000ms
RECLAIM count delay total delay average delay max
0 0 0.000ms 0.000000ms
THRASHING count delay total delay average delay max
0 0 0.000ms 0.000000ms
COMPACT count delay total delay average delay max
0 0 0.000ms 0.000000ms
WPCOPY count delay total delay average delay max
235 15648284 0.067ms 0.263842ms
IRQ count delay total delay average delay max
0 0 0.000ms 0.000000ms
[wang.yaxin@zte.com.cn: update docs and fix some spelling errors]
Link: https://lkml.kernel.org/r/20241213192700771XKZ8H30OtHSeziGqRVMs0@zte.com.cn
Link: https://lkml.kernel.org/r/20241203164848805CS62CQPQWG9GLdQj2_BxS@zte.com.cn
Co-developed-by: Wang Yong <wang.yong12@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Co-developed-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: tuqiang <tu.qiang35@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As with other documentation files, author information is added to
min_heap.rst, providing contact details for any questions regarding the
Min Heap API or the document itself.
Link: https://lkml.kernel.org/r/20241129181222.646855-5-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drm-next
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small IIO and interconnect and other driver fixes
to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
interconnect: icc-clk: check return values of devm_kasprintf()
interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
...
|
|
Pull kvm fixes from Paolo Bonzini:
"The largest part here is for KVM/PPC, where a NULL pointer dereference
was introduced in the 6.13 merge window and is now fixed.
There's some "holiday-induced lateness", as the s390 submaintainer put
it, but otherwise things looks fine.
s390:
- fix a latent bug when the kernel is compiled in debug mode
- two small UCONTROL fixes and their selftests
arm64:
- always check page state in hyp_ack_unshare()
- align set_id_regs selftest with the fact that ASIDBITS field is RO
- various vPMU fixes for bugs that only affect nested virt
PPC e500:
- Fix a mostly impossible (but just wrong) case where IRQs were never
re-enabled
- Observe host permissions instead of mapping readonly host pages as
guest-writable. This fixes a NULL-pointer dereference in 6.13
- Replace brittle VMA-based attempts at building huge shadow TLB
entries with PTE lookups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: e500: perform hugepage check after looking up the PFN
KVM: e500: map readonly host pages for read
KVM: e500: track host-writability of pages
KVM: e500: use shadow TLB entry as witness for writability
KVM: e500: always restore irqs
KVM: s390: selftests: Add has device attr check to uc_attr_mem_limit selftest
KVM: s390: selftests: Add ucontrol gis routing test
KVM: s390: Reject KVM_SET_GSI_ROUTING on ucontrol VMs
KVM: s390: selftests: Add ucontrol flic attr selftests
KVM: s390: Reject setting flic pfault attributes on ucontrol VMs
KVM: s390: vsie: fix virtual/physical address in unpin_scb()
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Pull IIO updaate from Jonathan:
IIO: 1st set of new device support, features and cleanup for 6.14
Fairly quiet cycle. Usual mix of new drivers, device support in
existing drivers, features and more general rework and cleanup.
There are a few late breaking or long standing but complex fixes
in here as well.
There is one expected merge conflict due to an upstream fix touching
neighboring code in ti-ads1119. The trivial resolution is the right one with
the result ending up as:
struct {
s16 sample;
aligned_s64 timestamp;
} scan;
New device support
==================
adi,ad4000
- Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688,
AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984,
AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series
but with lower sampling rates and no configuration registers.
Includes addition of timestamp channels.
adi,adis16480
- Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks
to existing driver and addition of tables.
kionix,kx022a
- Add support for KX134ACR-LBZ accelerometer that is similar to the
KX132ACR-LBZ but with a wider (+-64G) sensor range.
- Add support for KX134-1211 accelerometer that is similar to the
KX132-1211 but with a wider (+-16G) sensor range.
nxp,fxls8962af
- Add support for fxls8974cf and fxls8967af accelerometers, Both are
compatible with fxls8962af but with different device IDs which are used in
presence checks.
renesas,rzg2l
- Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors
precede this to allow for chip differences).
rohm,bd79704
- New driver for this 6 channel DAC.
st,mpu6050
- Support he IAM20380 which is effectively a cut down IAM20608 IMU with only
a gyroscope (no accelerometer).
st,stm-timmer-trigger
- Add support for ADC trigger use case for the STM32MP25 SOC. Do not support
the counter functionality in this driver as that is handled by the
counter subsystem.
ti,opt4060
- New driver for this RGBW color sensor.
Driver drop
===========
rohm,bu20008
- Drop as decision was made to not mass produce this light sensor after
Matti had done all the work to get a driver upstream.
Features
========
adi,ad_sigma_delta library + ad7124
- Allow for GPIO to check interrupt status, enabling this device on
more platforms that don't obey prior (non general) assumptions on
how the interrupt chips work.
- Allow variation in reset sequence length allowing chip specific
optimizations rather than always using worst case.
adi,ad7124
- Add temperature channel support.
adi,ad7173
- Add support calibration modes for this family of ADCs.
adi,adxl345
- Binding update to allow specification of which interrupt line is
connected (or none).
- Support interrupts and FIFO based data capture.
bosch,bme680
- Add regulators support. Note this required a new binding doc rather than
use of trivial-devices
- Runtime PM support.
microchip,pac1921
- Add ACPI support including _DSM for shunt value and label.
renesas,rzg2l
- Enable runtime autosuspend.
- Add suspend and resume support.
tyhx,hx9023s
- Add loading of a firmware file used to set defaults for some
configuration registers.
vishay,veml6030
- Support triggered buffers allowing efficient data capture at
higher speeds.
- Add regmap cache to reduce access to device.
Cleanup and minor fixes
=======================
cross-tree
- Another batch of conversions to devm_regulator_get_enable_read_voltage()
helper and related conversions to full devm that this enables.
- Various patches using guard() to allow early returns and simpler
code flow.
- Various conversions from s64 timestamp __aligned(8) to aligned_s64 type.
Includes a few cleanups where this unsigned and it should have been
signed.
- Fix up some missing types for drive-open-drain in dt-binding docs.
core
- Add missing documentation for iio_dmaengine_buffer_setup_ext()
- Add check that all buffers passed to iio_read_channel_ext_info()
and iio_read_channel_label() are page sized and page aligned.
Done this way because the callbacks are almost always only used
to fill sysfs attributes. The check covers the tiny percentage
of cases where use is made of this data in a consumer driver.
- Mark scan_timestamp memory of struct iio_dev private ensuring no
drivers change the value which belongs to the IIO core.
documentation
- Various missing ABI docs added.
- ABI docs made to use Y consistently as the wildcard for channel
number.
- Combine duplicate in_currentY_raw entries in ABI docs.
iio-mux
- Fix alignment of buffers passed to iio_channel_read_ext_info().
adi,ad_sigma_delta library
- Respect keep_cs_asserted flag in read path.
- Close a race condition around irq enabling and disabling.
- Use explicit unsigned int in place of unsigned.
adi,ad6695
- Move dt-binding header under adc sub-directory and fix include path in dt
example.
adi,ad7124
- Check number of channels in DT doesn't exceed what the driver can handle.
- Check input specified in DT are possible.
- Improved error reporting during probe.
adi,ad7173
- Drop unused structure element.
adi,ad7293
- Ensure power is turned on before resetting.
adi,adxl345
- Some documentation simplification and parameter renames.
- Add a function than unifies handling of power up and power down.
- Add defines to have a complete set of registers defined.
- Add missing \n to end of error messages.
amlogic,meson_saradc
- Simplify handling of the REG11 register access.
awinic,aw96104
- Constify iio_info structure.
bosch,bmp085
- Add to dt-binding to indicate devices support SPI.
bosch,bmp280
- Use sizeof() to replace a somewhat magic 2.
- Rename sleep related variables so the unit is included and use
fsleep() to replace usleep_range() calls.
bosch,bno055
- Constify struct bin_attribute
capella,cm3232
- Reset device before checking hardware ID inline with suggested flow
from datasheet.
diolan,dln2
- Simplify zeroing of structure used to gather up data by just
clearing the whole thing before writing rather than trying to
clear out he padding after write.
freescale,vf610
- Use devm_ and dev_error_probe() to simplify code and allow dropping
of explicit remove() callback.
invensense,timestamp library
- Use a cast to remove possibility of integer overflow.
kionix,kx022a
- Increase reset delay a little.
maxim,max1363
- Use a buffer of sufficient size in iio_priv() rather than allocating
variable sized buffer at use time.
microchip,mcp4725
- Replace of_property_read_bool() with of_property_present() for
detecting presence of regulator which is obviously not a bool.
nxp,fxls8962af
- Add wakeup-source property to the dt binding to allow these sensors
to wake the system up from suspend.
- Enable finer grained build when not all bus types need to be supported.
renesas,rzg2l
- Use dev_err_probe(), improving handling of probe errors and simplifying
code.
- Convert to devm_ based cleanup.
- Remove unnecessary runtime PM complexity as clocks are managed through
PM domains.
- Switch pm_ptr() removing need for __maybe_unused markings.
- use read_poll_timeout() to replace open coded equivalent.
samsung, ssp_sensors
- Simplify code by always providing timestamp whether or not it
is enabled.
st,lsm6dsx
- Avoid need to include linux/i3c/master by using i3cdev_to_dev() to
get to the contained struct device.
st,stm32-timer-trigger
- Check for clk_enable() fails.
vishay,veml6030
- Use new gts-helper functions and fix the _scale attribute to take into
account changes in gain and integration time.
Various other typo fixes in variable names + documentation and help text.
A few whitespace cleanup patches.
* tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
iio: adc: ad7625: Add ending newlines to error messages
iio: accel: adxl345: complete the list of defines
iio: accel: adxl345: add FIFO with watermark events
iio: accel: adxl345: initialize FIFO delay value for SPI
iio: accel: adxl345: introduce interrupt handling
iio: light: veml3235: fix scale to conform to ABI
iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
iio: light: veml3235: extend regmap to add cache
iio: light: veml3235: fix code style
dt-bindings: iio: accel: adxl345: add interrupt-names
dt-bindings: iio: accel: adxl345: make interrupts not a required property
dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain
iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access
iio: adc: meson: use tabs instead of spaces for some REG11 bit fields
iio: adc: meson: fix voltage reference selection field name typo
iio: adc: rockchip: correct alignment of timestamp
iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Pull extcon updates from Chanwoo:
Update extcon next for v6.14
Detailed description for this pull request:
- Fix null pointer check of memory allocation on extcon-rtk-type-c.c.
- Add EXTCON subsystem documentation including the detailed description/example.
- Drop unneeded init of struct i2c_device_id:driver_data on extcon-fsa9480/pth5150.c.
* tag 'extcon-next-for-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
Documentation: extcon: add documentation for Extcon subsystem
extcon: realtek: fix NULL deref check in extcon_rtk_type_c_probe
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Pull coresight updates from Suzuki:
coresight: Updates for Linux v6.14
Coresight self-hosted tracing subsystem updates for v6.14 includes:
- Support for static traceid allocation for devices
- Support for impdef, static trace filtering in Qualcomm replicators
- Miscellaneous fixes
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight-tpda: Optimize the function of reading element size
coresight: Add support for trace filtering by source
coresight: Add a helper to check if a device is source
dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
coresight: Fix dsb_mode_store() unsigned val is never less than zero
coresight: dummy: Add static trace id support for dummy source
coresight: Add support to get static id for system trace sources
dt-bindings: arm: Add arm,static-trace-id for coresight dummy source
coresight: Drop atomics in connection refcounts
Coresight: Narrow down the matching range of tpdm
|
|
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
|
|
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information. So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.
This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream. When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
|
|
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.
This patch extends the rawmidi info ioctl to show the tied device
number. As default it stores -1, indicating that no tied device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed,usb-vhub.yaml
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # ti,tusb73x0-pci.yaml
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> # brcm,bdc.yaml
Acked-by: Benjamin Bara <benjamin.bara@skidata.com> # cypress,hx3.yaml
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107131015.246461-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-01-10
Pierre-Henry Moussay adds PIC64GX compatibility to the DT bindings for
Microchip's mpfs-can IP core.
The next 3 patches are by Sean Nyekjaer and target the tcan4x5x
driver. First the DT bindings is converted to DT schema, then nWKRQ
voltage selection is added to the driver.
Dario Binacchi's patch for the sun4i_can makes the driver more
consistent by adding a likely() to the driver.
Another patch by Sean Nyekjaer for the tcan4x5x driver gets rid of a
false error message.
Charan Pedumuru converts the atmel-can DT bindings to DT schema.
The next 2 patches are by Oliver Hartkopp. The first one maps Oliver's
former mail addresses to a dedicated CAN mail address. The second one
assigns net/sched/em_canid.c additionally to the CAN maintainers.
Ariel Otilibili's patch removes dead code from the CAN dev helper.
The next 3 patches are by Sean Nyekjaer and add HW standby support to
the tcan4x5x driver.
A patch by Dario Binacchi fixes the DT bindings for the st,stm32-bxcan
driver.
The last 4 patches are by Jimmy Assarsson and target the kvaser_usb
and the kvaser_pciefd driver: error statistics are improved and
CAN_CTRLMODE_BERR_REPORTING is added.
* tag 'linux-can-next-for-6.14-20250110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_pciefd: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_pciefd: Update stats and state even if alloc_can_err_skb() fails
can: kvaser_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_usb: Update stats and state even if alloc_can_err_skb() fails
dt-bindings: can: st,stm32-bxcan: fix st,gcan property type
can: m_can: call deinit/init callback when going into suspend/resume
can: tcan4x5x: add deinit callback to set standby mode
can: m_can: add deinit callback
can: dev: can_get_state_str(): Remove dead code
MAINTAINERS: assign em_canid.c additionally to CAN maintainers
mailmap: add an entry for Oliver Hartkopp
dt-bindings: net: can: atmel: Convert to json schema
can: tcan4x5x: get rid of false clock errors
can: sun4i_can: continue to use likely() to check skb
can: tcan4x5x: add option for selecting nWKRQ voltage
dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option
dt-bindings: can: convert tcan4x5x.txt to DT schema
dt-bindings: can: mpfs: add PIC64GX CAN compatibility
====================
Link: https://patch.msgid.link/20250110112712.3214173-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a documentation file
(Documentation/nvme/nvme-pci-endpoint-target.rst) for the new NVMe PCI
endpoint target driver. This provides an overview of the driver
requirements, capabilities and limitations. A user guide describing how
to setup a NVMe PCI endpoint device using this driver is also provided.
This document is made accessible also from the PCI endpoint
documentation using a link. Furthermore, since the existing nvme
documentation was not accessible from the top documentation index, an
index file is added to Documentation/nvme and this index listed as
"NVMe Subsystem" in the "Storage interfaces" section of the subsystem
API index.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
DMEM cgroup pull request
This introduces a new cgroup controller to limit the device memory.
Notable users would be DRM, dma-buf heaps, or v4l2.
This pull request is based on the series developped by Maarten
Lankhorst, Friedrich Vock, and I:
https://lore.kernel.org/all/20241204134410.1161769-1-dev@lankhorst.se/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110-cryptic-warm-mandrill-b71f5d@houat
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, this has the usual amdgpu/xe/i915 bits.
There is a bigger bunch of mediatek patches that I considered not
including at this stage, but all the changes (except for one were
obvious small fixes, and the rotation one is a few lines, and I
suppose will help someone have their screen up the right way), I
decided to include it since I expect it got slowed down by holidays
etc, and it's not that mainstream a hw platform.
i915:
- Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from
check_link"
amdgpu:
- Display interrupt fixes
- Fix display max surface mismatches
- Fix divide error in DM plane scale calcs
- Display divide by 0 checks in dml helpers
- SMU 13 AD/DC interrrupt handling fix
- Fix locking around buddy trim handling
amdkfd:
- Fix page fault with shader debugger enabled
- Fix eviction fence wq handling
xe:
- Avoid a NULL ptr deref when wedging
- Fix power gate sequence on DG1
mediatek:
- Revert "drm/mediatek: dsi: Correct calculation formula of PHY
Timing"
- Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind
returns err
- Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
- Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
- Add support for 180-degree rotation in the display driver
- Stop selecting foreign drivers
- Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
- Fix YCbCr422 color format issue for DP
- Fix mode valid issue for dp
- dp: Reference common DAI properties
- dsi: Add registers to pdata to fix MT8186/MT8188
- Remove unneeded semicolon
- Add return value check when reading DPCD
- Initialize pointer in mtk_drm_of_ddp_path_build_one()"
* tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe/dg1: Fix power gate sequence.
drm/xe: Fix tlb invalidation when wedging
Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
drm/amdgpu: Add a lock when accessing the buddy trim function
drm/amd/pm: fix BUG: scheduling while atomic
drm/amdkfd: wq_release signals dma_fence only when available
drm/amd/display: Add check for granularity in dml ceil/floor helpers
drm/amdkfd: fixed page fault when enable MES shader debugger
drm/amd/display: fix divide error in DM plane scale calcs
drm/amd/display: increase MAX_SURFACES to the value supported by hw
drm/amd/display: fix page fault due to max surface definition mismatch
drm/amd/display: Remove unnecessary amdgpu_irq_get/put
drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one()
drm/mediatek: Add return value check when reading DPCD
drm/mediatek: Remove unneeded semicolon
drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188
dt-bindings: display: mediatek: dp: Reference common DAI properties
drm/mediatek: Fix mode valid issue for dp
drm/mediatek: Fix YCbCr422 color format issue for DP
Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
...
|
|
Update scsi_mid_low_api.rst for changes to struct scsi_host and
struct scsi_cmnd.
struct scsi_host:
- no_async_abort is gone
- drop sh_list w/ no replacement
- change my_devices to __devices
struct scsi_cmnd:
- removed 'done' (now in struct scsi_driver); use scsi_done() or
scsi_done_direct() callbacks
- change previous request_bufflen to scsi_bufflen()
- change previous use_sg field to scsi_dma_map() or scsi_sg_count()
- change previous request_buffer field to reference to 'usg_sg' text
[mkp: removed more obsolete stuff]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241221212539.1314560-1-rdunlap@infradead.org
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For scsi_devinfo.c, use :export: so that exported symbols are put into the
docbook. Drop :internal: -- they aren't needed in the docbook.
For scsi_proc.c, drop :internal:. This will cause all documented private
(as is already done) and exported symbols to be added to the docbook.
For scsi_scan.c, switch from :internal: to :export: so that exported
symbols are put into the generated docbook.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241218000748.932850-1-rdunlap@infradead.org
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Document where exported and imported symbols are kept, format options,
and limitations.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add documentation for gendwarfksyms changes, and the kABI stability
features that can be useful for distributions even though they're not
used in mainline kernels.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add TXT file extension so the format of binding will be explicit (we
have also bindins in YAML).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250107131111.246969-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed,ast2400-vic.yaml
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250107131108.246898-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
