Age | Commit message (Collapse) | Author |
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of multiple thermal drivers for 6.16 from Daniel Lezcano:
"- Make the Hisilicon driver to compile by default when ARCH_HISI is
set (Krzysztof Kozlowski)
- Cleanup printk format with use of %pC instead of %pCn in the bcm2835
driver (Luca Ceresoli)
- Fix variable naming coding style in the AmLogic driver (Enrique
Isidoro Vazquez Ramos)
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS driver (AngeloGioacchino Del Regno)
- Remove the unused lvts_debugfs_exit() function as the devm variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann)
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi)
- Add ipq5018 compatible string DT binding, cleanup and add its suppot
in the QCom Tsens driver driver (Sricharan Ramabadhran and George
Moussalem)
- Fix comments typos in the Airoha driver (Christian Marangi)"
* tag 'thermal-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/airoha: Fix spelling mistake
thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens
thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM
thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+
dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
thermal/drivers: Add support for Airoha EN7581 thermal sensor
dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor
thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit
thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure
thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style
vsprintf: remove redundant and unused %pCn format specifier
thermal/drivers/bcm2835: Use %pC instead of %pCn
thermal/drivers/hisi: Do not enable by default during compile testing
|
|
Merge an update of the Intel int340x thermal driver adding Platform
Temperature Control (PTC) support to it (Srinivas Pandruvada).
* thermal-intel:
thermal: int340x: processor_thermal: Platform temperature control documentation
thermal: intel: int340x: Enable platform temperature control
thermal: intel: int340x: Add platform temperature control interface
|
|
Introduce 'firmware-name' property to allow end-users and/or integrators
to decide which usecase-specific firmware to run on the WCN7850 platform.
This is necessary due to resource limitations such as memory capacity and
CPU capability, or performance and power optimization for different
application scenarios.
Two firmwares are supported: 'WCN7850/hw2.0' and 'WCN7850/hw2.0/ncm825'.
The former is the default firmware, suitable for most WiFi 7 STA
functions. The latter adds support for commercial-quality SAP and
optimizes power consumption for IoT applications.
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250424005703.2479907-2-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
commit 1c4b5ecb7ea1 ("remove the h8300 architecture") removes Renesas TPU
timer driver. Let's remove its binding documentation.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87semglt2g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Update the documentation to reflect the migration of the following
architectures to the centralized syscall table format:
arc, arm64, csky, hexagon, loongarch, nios2, openrisc, riscv
As of commit 3db80c999debbad ("riscv: convert to generic syscall table"),
these architectures no longer rely on include/uapi/asm-generic/unistd.h.
Instead, syscall table headers (syscall_table_{32,64}.h) are generated by
scripts/syscalltbl.sh based on entries in scripts/syscall.tbl, with ABIs
specified in arch/*/kernel/Makefile.syscalls.
For the convenience of developers working with older kernel versions, the
original documentation is fully retained, with new sections added to
cover the scripts/syscall.tbl approach.
Verified with `make htmldocs`.
Signed-off-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://lore.kernel.org/lkml/20240704143611.2979589-1-arnd@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250506194841.1567737-1-y.j3ms.n@gmail.com>
|
|
Fix 'peace' to 'piece' in the ntb documentation
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250519080248.648971-1-utkarsh02t@gmail.com>
|
|
Introduction paragraph to the ioctl numbers table states that only
ioctls in up to ancient Linux kernel version (v2.6.31) for x86 arch are
listed. This is inaccurate as the table also lists ioctls from non-x86
archs and the kernel is continously developed (currently in v6.x).
Update the paragraph accordingly.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250508005838.8381-2-bagasdotme@gmail.com>
|
|
Since commit 5e25b972a22b ("docs: changes: update Python minimal version"),
the minimal Sphinx version is 3.4.3.
Drop support for older versions from the config file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250507121117.317810-1-mchehab+huawei@kernel.org>
|
|
Add the kernel-doc comments from lib/kobject_uevent.c to the
"Kernel objects manipulation" section of driver API Basics.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250509005538.685678-1-rdunlap@infradead.org>
|
|
Cleanup some punctuation, capital letter, and a missing word
in relay.rst.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250512023233.107582-1-rdunlap@infradead.org>
|
|
Corrects a spelling mistake in Documentation/trace/coresight/panic.rst
where "incase" was used instead of "in case".
Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250513110931.15072-1-hendrik.hamerlinck@hammernet.be>
|
|
The "$id" value must match the relative path under bindings/ and is
missing the "net" sub-directory.
Fixes: 09328600c2f9 ("dt-bindings: can: convert microchip,mcp251x.txt to yaml")
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250507154201.1589542-1-robh@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
On AmpereOne AC04, updates to HCR_EL2 can rarely corrupt simultaneous
translations for data addresses initiated by load/store instructions.
Only instruction initiated translations are vulnerable, not translations
from prefetches for example. A DSB before the store to HCR_EL2 is
sufficient to prevent older instructions from hitting the window for
corruption, and an ISB after is sufficient to prevent younger
instructions from hitting the window for corruption.
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250513184514.2678288-1-scott@os.amperecomputing.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add support for the SD/eMMC Host Controller found in SpacemiT K1 SoC,
The controller supports data transmission of MMC, SDIO, SD protocol.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250509-20-k1-sdhci-v3-1-526c35feaa20@gentoo.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Signed-off-by: Anish Dabhane <anishdabhane71@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250518140107.21310-1-anishdabhane71@gmail.com>
|
|
Correct pin-point to pinpoint, If that the case to If that is the case,
and its only slightly modified to it's only slightly modified in
Documentation/admin-guide/reporting-issues.rst for proper spelling and grammar.
Signed-off-by: Shivam Sharma <10sharmashivam@gmail.com>
Acked-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250518172658.6983-1-10sharmashivam@gmail.com>
|
|
Document the bindings for the Qualcomm QCS9100 and QCS9075 board
specific sound card.
The bindings are the same as for other newer Qualcomm ADSP sound cards,
thus keep them in existing qcom,sm8250.yaml file, even though Linux driver
is separate.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519083244.4070689-2-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
schema
Update text binding to YAML.
Changes during conversion:
Add appropriate include statements for interrupts and clock-names
to resolve errors identified by `dt_binding_check` and `dtbs_check`.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507-mchp-sdhci-v1-2-ed29de05295a@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Describe the two new vcpu flags that control NV, together with
the capabilities that advertise them.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20250514103501.2225951-18-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Convert the Marvell CESA binding to DT schema format. The
marvell-cesa.txt and mv_cesa.txt are duplicate bindings.
The clock properties are quite varied for each platform hence the
if/then schemas. The old binding was fairly accurate with reality.
The original binding didn't mention there is 1 interrupt per CESA
engine. Based on users, there's a maximum of 2 engines.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the Imagination Technologies hardware hash accelerator binding
to DT schema format. It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the HiSilicon HIP06/7 Security Accelerator binding to DT schema
format. It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the Broadcom SPUM/SPU2 binding to DT schema format. It's a
straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the Axis Crypto engine binding to DT schema format. It's a
straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the AMD Cryptographic Coprocessor binding to DT schema format.
It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The mediatek,eip97-crypto binding is half abandoned. The driver was
dropped in 2020 as the Mediatek platforms use InsideSecure block and
the driver for it. All the platforms except MT7623 were updated. A
patch to update it was submitted, but never addressed the review
comments.
Link: https://lore.kernel.org/all/20210303080923.16761-1-vic.wu@mediatek.com/
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The fsl,sec-v6.0 binding is the same as the fsl,sec-v4.0 binding, so add
it to the existing schema and drop the old .txt binding.
The compatibles in the .txt binding don't match the 1 user. Follow the
user for the schema.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enable the reporting of error counters through sysfs for QAT GEN6
devices and update the ABI documentation.
This enables the reporting of the following:
- errors_correctable - hardware correctable errors that allow the
system to recover without data loss.
- errors_nonfatal: errors that can be isolated to specific in-flight
requests.
- errors_fatal: errors that cannot be contained to a request,
requiring a Function Level Reset (FLR) upon occurrence.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.16
CI:
- uprev mesa
GPU:
- ACD (Adaptive Clock Distribution) support for X1-85. This is required
enable the higher frequencies.
- Drop fictional `address_space_size`. For some older devices, the address
space size is limited to 4GB to avoid potential 64b rollover math problems
in the fw. For these, an `ADRENO_QUIRK_4GB_VA` quirk is added. For
everyone else we get the address space size from the SMMU `ias` (input
address sizes), which is usually 48b.
- Improve robustness when GMU HFI responses time out
- Fix crash when throttling GPU immediately during boot
- Fix for rgb565_predicator on Adreno 7c3
- Remove `MODULE_FIRMWARE()`s for GPU, the GPU can load the firmware after
probe and having partial set of fw (ie. sqe+gmu but not zap) causes problems
MDSS:
- Added SAR2130P support to MDSS driver
DPU:
- Changed to use single CTL path for flushing on DPU 5.x+
- Improved SSPP allocation code to allow sharing of SSPP between planes
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- Misc fixes
DP:
- Switch to use new helpers for DP Audio / HDMI codec handling
- Fixed LTTPR handling
DSI:
- Added support for SA8775P
- Added SAR2130P support
MDP4:
- Fixed LCDC / LVDS controller on
HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGv2Go+nseaEwRgeZbecet-h+Pf2oBKw1CobCF01xu2XVg@mail.gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amdgpu:
- Misc code cleanups
- UserQ fixes
- MALL reporting fix
- DP AUX fixes
- DCN 3.5 fixes
- DP MST fixes
- DC DMI quirks cleanup
- RAS fixes
- SR-IOV updates
- GC 9.5 updates
- Misc display fixes
- VCN 4.0.5 powergating race fix
- SMU 13.x updates
- Paritioning fixes
- VCN 5.0.1 SR-IOV updates
- JPEG 5.0.1 SR-IOV updates
amdkfd:
- Fix spurious warning in interrupt code
- XNACK fixes
radeon:
- CIK doorbell cleanup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250516204609.2437472-1-alexander.deucher@amd.com
|
|
Add compatible string for the Sophgo SG2044 SoC and the SRD3-10
board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/20250413223507.46480-10-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The SG2044 implement a standard T-HEAD C900 PLIC, which is
already supported by the kernel.
Add compatible string for Sophgo SG2044 plic.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250413223507.46480-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
As SG2044 also implements an enhanced ACLINT as SG2042, add necessary
compatible string for SG2044 SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250413223507.46480-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Both Intel and AMD CPUs support 5-level paging, which is expected to
become more widely adopted in the future. All major x86 Linux
distributions have the feature enabled.
Remove CONFIG_X86_5LEVEL and related #ifdeffery for it to make it more readable.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-4-kirill.shutemov@linux.intel.com
|
|
C naming info for OVPN which was added since I adjusted
the existing attrs. Also add missing reference to a header needed
for a bridge struct.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irqdomain.c's kernel-doc exists, but is not plugged into Documentation/
yet.
Before plugging it in, fix it first: irq_domain_get_irq_data() and
irq_domain_set_info() were documented twice. Identically, by both
definitions for CONFIG_IRQ_DOMAIN_HIERARCHY and !CONFIG_IRQ_DOMAIN_HIERARCHY.
Therefore, switch the second kernel-doc into an ordinary comment -- change
"/**" to simple "/*". This avoids sphinx's: WARNING: Duplicate C
declaration
Next, in commit b7b377332b96 ("irqdomain: Fix the kernel-doc and plug it
into Documentation"), irqdomain.h's (header) kernel-doc was added into
core-api/genericirq.rst. But given the amount of irqdomain functions and
structures, move all these to core-api/irq/irq-domain.rst now.
Finally, add these newly fixed irqdomain.c's (source) docs there as
well.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-58-jirislaby@kernel.org
|
|
The irqdomain documentaion became obsolete over time. Update and extend
it a bit with respect to the current code and HW.
Most notably the doubled documentation of irq_domain (from .rst and .h)
was unified and let only in .rst. A reference link was added to .h.
Furthermore:
* Add some 'struct' keywords, so that the respective structs are
hyperlinked
* :c:member: use where appropriate to mark a member of a struct
* Rephrase some wording to improve readability/understanding
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-57-jirislaby@kernel.org
|
|
The improvements include:
* Capitals in headlines.
* Add commas: for easier reading, it is always desired to add commas
at some places in text. Like before adverbs or after fronted
sentences.
* 3rd person -> add 's' to verbs.
* End some sentences with period and start a new one. Avoid thus heavy
sentences.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-56-jirislaby@kernel.org
|
|
Just note in the docs:
1) A PCI device as an example for shared interrupts
2) A sparse tree can be used for interrupts too
3) i8259s which have 8 pins
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-55-jirislaby@kernel.org
|
|
For easier reading, it is always desired to add commas at some places in
text. Like before adverbs or after fronted sentences.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-54-jirislaby@kernel.org
|
|
irq_linear_revmap() is deprecated and unused now. So remove it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-50-jirislaby@kernel.org
|
|
Most irq_domain_add_*() functions are unused now, so drop them. The
remaining ones are moved to the deprecated section and will be removed
during the merge window after the patches in various trees have been
merged.
Note: The Chinese docs are touched but unfinished. I cannot parse those.
[ tglx: Remove the leftover in irq-domain.rst and handle merge logistics ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-41-jirislaby@kernel.org
|
|
All irq_domain_add_*() functions are going away. PowerPC is the only
user of irq_domain_add_nomap() and there is no irq_domain_create_nomap()
complement.
Therefore, to align with the rest of the kernel, rename
irq_domain_add_nomap() to irq_domain_create_nomap() and accept a
fwnode_handle instead of a device_node.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-40-jirislaby@kernel.org
|
|
'rcu/torture-for-6.16' into rcu/for-next
|
|
Currently, the ->gpwrap is not tested (at all per my testing) due to the
requirement of a large delta between a CPU's rdp->gp_seq and its node's
rnp->gpseq.
This results in no testing of ->gpwrap being set. This patch by default
adds 5 minutes of testing with ->gpwrap forced by lowering the delta
between rdp->gp_seq and rnp->gp_seq to just 8 GPs. All of this is
configurable, including the active time for the setting and a full
testing cycle.
By default, the first 25 minutes of a test will have the _default_
behavior there is right now (ULONG_MAX / 4) delta. Then for 5 minutes,
we switch to a smaller delta causing 1-2 wraps in 5 minutes. I believe
this is reasonable since we at least add a little bit of testing for
usecases where ->gpwrap is set.
[ Apply fix for Dan Carpenter's bug report on init path cleanup. ]
[ Apply kernel doc warning fix from Akira Yokosawa. ]
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
This patch adjust the example code with following two purpose:
* reduce the confusion on not releasing e->lock
* emphasize e is valid and not stale with e->lock held
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: Alan Huang <mmpgouride@gmail.com>
Reviewed-by: Alan Huang <mmpgouride@gmail.com>
Link: https://lore.kernel.org/r/20250218005047.27258-1-richard.weiyang@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
This commit adds the 2024 LWN RCU API article set.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
Resctrl is a filesystem interface to hardware that provides cache
allocation policy and bandwidth control for groups of tasks or CPUs.
To support more than one architecture, resctrl needs to live in /fs/.
Move the code that is concerned with the filesystem interface to
/fs/resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-25-james.morse@arm.com
|
|
Document support for the Renesas OS Timer (OSTM) found on the Renesas
RZ/V2N (R9A09G056) SoC. The OSTM IP on RZ/V2N is identical to that on
other RZ families, so no driver changes are required as `renesas,ostm`
will be used as fallback compatible.
Also update the bindings to require the "resets" property for RZ/V2N
by inverting the logic: all SoCs except RZ/A1 and RZ/A2 now require
the "resets" property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250515182207.329176-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
IPQ5018 has tsens v1.0 block with 5 sensors of which 4 are in use
and 1 interrupt.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/DS7PR19MB88835BD1063C4D5451E14B0E9DCC2@DS7PR19MB8883.namprd19.prod.outlook.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|