summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2024-10-22ARM: dts: imx6sll: fix anatop thermal dtbs_check warningsAndreas Kemnade
Fix anatop thermal related dtbs_check warnings about node name and missing thermal-cells property. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6dl: Add support for i.MX6DL DHCOM SoM on PDK2 carrier boardMarek Vasut
Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation board. The evaluation board features three serial ports, USB OTG, USB host with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio, PCIe and HDMI video output. All of the aforementioned features except for mSATA are supported, mSATA is not available on i.MX6DL and is only available on DHCOM populated with i.MX6Q SoC which is already supported upstream. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-pdk2: Fill in missing panel power-supplyMarek Vasut
Add missing panel power-supply property to DT to fix the following warning. The power supply on this device is very simple chain of regulators from the main 24V input, describe those. " arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dtb: panel: 'power-supply' is a required property " Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-pdk2: Drop incorrect size-cells in GPIO keysMarek Vasut
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys is not a bus, see dtbs_check warning: " arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' " Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-som: Drop bogus regulator-suspend-mem-microvoltMarek Vasut
Drop unused regulator-suspend-mem-microvolt property from PMIC regulator nodes. This property is not used by either U-Boot, Linux, nor is it documented in the DT bindings, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx7-colibri: Update audio card nameHiago De Franco
Update the audio card name for Colibri iMX7 to match its specific SoM name, making it compliant with the other names for Colibri iMX6 and Apalis iMX6. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-colibri: Update audio card nameHiago De Franco
Update the audio card name for Colibri iMX6 to match its specific SoM name, making it less than 15 characters to fix the following warning fsl-asoc-card sound: ASoC: driver name too long 'imx6dl-colibri-sgtl5000' -> 'imx6dl-colibri-' making it compliant with the ALSA configuration specification [1]. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. [1] Documentation/sound/alsa-configuration.rst Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-apalis: Update audio card nameHiago De Franco
Update the audio card name for Apalis iMX6 to match its specific SoM name, making it less than 15 characters to fix the following warning fsl-asoc-card sound: ASoC: driver name too long 'imx6q-apalis-sgtl5000' -> 'imx6q-apalis-sg' making it compliant with the ALSA configuration specification [1]. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. [1] Documentation/sound/alsa-configuration.rst Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21ARM: dts: Reconfigure the MC2 eMMC interfaceLinus Walleij
The eMMC interface was configured to configure the FBCLK into the Alt A setting, but this should be in GPIO mode and available for use as a reset line. Move it to the new mc_a_2 setting, and define this config in the generic options. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-2-a89bfbd0f680@linaro.org
2024-10-21ARM: dts: ux500: Add touchkeys to CodinasLinus Walleij
The Codina Zinitix touchscreens have touchkeys for HOME and BACK, add these now that the driver and bindings support it. Cc: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-1-a89bfbd0f680@linaro.org
2024-10-21ARM: dts: imx6qdl-dhcom: Fix model typo for i.MX6 DHSOMMarek Vasut
Each DHSOM uses three digits in the Cnnn part, drop the trailing zero. This is a change in comment, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21ARM: dts: imx6qdl-tx6: Fix 'fixed-clock' descriptionFabio Estevam
Per fixed-clock.yaml, it is not correct to pass unit address and reg to represent 'fixed-clock'. Remove it to fix the following dt-schema warning: clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/linux-arm-kernel/172808887941.121658.5039774358299826312.robh@kernel.org/ Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21ARM: dts: imx6qdl-tx6: Remove 'turn-on-delay-ms'Fabio Estevam
The 'turn-on-delay-ms' property is not documented nor used anywhere else. Remove this invalid property to fix the following dt-schema warning: Unevaluated properties are not allowed ('turn-on-delay-ms' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-17ARM: dts: amlogic: meson8/8b: remove invalid pinctrl regNeil Armstrong
The pinctrl aobus/cbus was originally here to configure the GPIO interrupt, but it was a bad design and was moved to a separate gpio_intc node because the GPIO interrupt is actually separate from the pinctrl/gpio registers. Drop this reg entry, and fix all the register offsets with a proper range property. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # Odroid-C1 Link: https://lore.kernel.org/r/20241015-topic-amlogic-arm32-upstream-bindings-fixes-pinctrl-dtbs-v1-1-c7291f17063e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-10-16ARM: dts: nxp: imx6ull: add dma support for uart8Sean Nyekjaer
Add dma support on uart8. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-16ARM: dts: nxp: imx6ul: add dma support for all uartsSean Nyekjaer
Add dma support on uart1, uart2, uart3, uart4, uart5, uart6 and uart7. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-16ARM: dts: imx6q-lxr: Add board supportFabio Estevam
The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM from Phytec. Add a devicetree description for this board. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-14ARM: dts: rockchip: Add Relfor Saib boardKarthikeyan Krishnasamy
Saib is an consumer electronics board from Relfor labs Features: - Rockchip RV1109 - 1GB DDR4 - 4GB eMMC - Realtek RTL8821CS Wi-Fi/BT - IR transmitter/receiver - RV3028 RTC - Switch - User leds Add support for it. Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240912142451.2952633-7-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-14ARM: dts: rockchip: Add watchdog node for RV1126Karthikeyan Krishnasamy
Add watchdog node for Rockchip RV1126 Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240912142451.2952633-3-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-14ARM: dts: renesas: kzm9g: Use interrupts-extended for sensorsGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/e04fff0e6d7d9ffebf5e3d3fe7682f0d411b60d9.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expanderGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/c77ffcd01d6e9e90cd1e5578c2af98c9ec6030c9.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTCGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/f3838c730a8af5a904939929e30a4d892fef8b39.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expanderGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/835b5e851939f6fa2c9567d6850a7e0c2574c1c7.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for video decodersGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/a8610814e31d0562732672f11d2be1404322121a.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for touchpanelsGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/d081d986e3a2b695bc27dbe00aa0fb244a22ffdf.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for PMICsGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/934b9b9992dacd72dbad0f5433728aac292a3cfc.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for HDMI bridgesGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/850317c7818b100f9afe026e80b6d685affe81a0.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for Ethernet PHYsGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/623645456e7636f43150a70f8603114b26304818.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for Ethernet MACsGeert Uytterhoeven
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/f51de53cb003f850751e13fdbddea64ad942ee7b.1728045620.git.geert+renesas@glider.be
2024-10-13ARM: dts: microchip: Rename LED sub nodes nameAndrei Simion
dtbs_check warnings: leds: 'd[0-9]', 'ds[0-9]' do not match any of the regexes : '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' leds: 'red', 'green', 'blue' do not match any of regexes : '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Rename the led sub nodes according to devicetree specification and leds-gpio.yaml and for aks-cdu add label property and use the old node name as value to stay stable and avoid breaking the userspace applications that depend on those paths. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20241002123010.111028-4-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: Rename the pmic nodeAndrei Simion
Rename the pmic node according to the devicetree specification. Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20241002123010.111028-3-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: Rename the eeprom nodenameAndrei Simion
Align the eeprom nodename according to devicetree specification and at24.yaml Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20241002123010.111028-2-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: sama7g5ek: Add power monitor supportMihai Sain
Add PAC1934 support in order to monitor the board power consumption. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20240923064932.5797-5-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: sama7g54_curiosity: Add power monitor supportMihai Sain
Add PAC1934 support in order to monitor the board power consumption. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20240923064932.5797-4-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: sama5d2_icp: Add power monitor supportMihai Sain
Add PAC1934 support in order to monitor the board power consumption. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20240923064932.5797-3-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: sam9x60ek: Add power monitor supportMihai Sain
Add PAC1934 support in order to monitor the board power consumption. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20240923064932.5797-2-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: Unify rng node namesAlexander Dahl
Using a generic name common over different platforms and matching the recent atmel rng binding now. Signed-off-by: Alexander Dahl <ada@thorsis.com> Suggested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240917072710.125435-3-ada@thorsis.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: Add trng labels for all at91 SoCsAlexander Dahl
SAM9X60 and SAMA7G5 already have those labels. Add it for the other SoC families so it can be referenced in board files. Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20240917072710.125435-2-ada@thorsis.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: sam9x60: Add missing property atmel,usart-modeAndrei Simion
Add the atmel,usart-mode property to the UART nodes. This ensures compliance with the atmel,at91-usart.yaml schema and resolves the errors below: serial@200: $nodename:0: 'serial@200' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$' serial@200: atmel,use-dma-rx: False schema does not allow True serial@200: atmel,use-dma-tx: False schema does not allow True serial@200: atmel,fifo-size: False schema does not allow [[16]] These errors indicate that the property atmel,usart-mode = <AT91_USART_MODE_SERIAL> is missing for UART nodes 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, and 12. Fixes: 99c808335877 ("ARM: dts: at91: sam9x60: Add missing flexcom definitions") Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20240912093307.40488-1-andrei.simion@microchip.com [claudiu.beznea: move the atmel,usart-mode close to vendor specific properties to cope with DTS coding style] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-09ARM: dts: renesas: genmai: Enable MMCIFWolfram Sang
Luckily, I still had an MMC card lying around. Works fine. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240928092953.2982-8-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-09ARM: dts: renesas: genmai: Enable SDHI0Wolfram Sang
For this to work, User LEDs must be disabled because they share their pins with SD data lines. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240928092953.2982-6-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-08ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pinFlorian Klink
HDMI_HPD_N_1V8 is connected to GPIO pin 0, not 1. This fixes HDMI hotplug/output detection. See https://datasheets.raspberrypi.com/cm/cm3-schematics.pdf Signed-off-by: Florian Klink <flokli@flokli.de> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240715230311.685641-1-flokli@flokli.de Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-10-08ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1Xu Yang
i.MX7ULP need properly set System Integration Module(SIM) module to make usb wakeup work well. This will add a "nxp,sim" property for usbphy1. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-08ARM: dts: imx28-apx4devkit: Fix the rtc compatibleFabio Estevam
"phg,pcf8563" is not a valid compatible string. Use the documented ""nxp,pcf8563" instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-08ARM: dts: imx6qdl-mba6: Add reserved memory area for CMA memoryAlexander Stein
Default CMA size is too small for HDMI output and VPU usage. Increase the default size by providing a CMA memory area. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-07ARM: dts: renesas: rcar-gen2: Switch HS-USB to renesas,enable-gpiosGeert Uytterhoeven
Commit 2071d0968e564b4b ("Documentation: gpio: guidelines for bindings") deprecated the "gpio" suffix for GPIO consumers in favor of the "gpios" suffix. Hence replace the "renesas,enable-gpio" property by "renesas,enable-gpios" in HS-USB device nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/c88724ce1e0d755302659cd790c0869ff579684e.1727853953.git.geert+renesas@glider.be
2024-10-07ARM: dts: renesas: r7s72100: 'bus-width' is a board propertyWolfram Sang
Do not set 'bus-width' in the SoC-include DTSI. It must be set in the board DTS file. No regressions because MMCIF was not enabled yet for this SoC. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240928092953.2982-7-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-07ARM: dts: renesas: Use proper node names for keysWolfram Sang
Avoids 'keyboard: 'four', 'one', 'three', 'two' do not match any of the regexes: ... Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240926110718.20519-6-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/20240926110718.20519-7-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/20240926110718.20519-8-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-07ARM: dts: renesas: r8a7778: Rename 'bsc' to 'lbsc'Wolfram Sang
R-Car Gen1 has an LBSC which has quite a different register set from the former BSC. To match R-Car M1 with R-Car H1, rename the node to LBSC. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240926103340.16909-6-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-07ARM: dts: renesas: Add proper node names to (L)BSC devicesWolfram Sang
(L)BSC must have a "bus" node name [1] and no unit-address because there is no reg-property. Fix these entries. [1] lbsc: $nodename:0: 'lbsc' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240926103340.16909-5-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit (git 2.34.1) at 2025-07-19 12:22:51 +0000