| Age | Commit message (Collapse) | Author |
|---|
|
The max VL for nested guests is additionally constrained by the max VL
selected by the guest hypervisor. Use that instead of KVM's max VL when
running a nested guest.
Note that the guest hypervisor's ZCR_EL2 is sanitised against the VM's
max VL at the time of access, so there's no additional handling required
at the time of use.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Load the guest hypervisor's ZCR_EL2 into the corresponding EL1 register
when restoring SVE state, as ZCR_EL2 affects the VL in the hypervisor
context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Similar to FPSIMD traps, don't load SVE state if the guest hypervisor
has SVE traps enabled and forward the trap instead. Note that ZCR_EL2
will require some special handling, as it takes a sysreg trap to EL2
when HCR_EL2.NV = 1.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Give precedence to the guest hypervisor's trap configuration when
routing an FP/ASIMD trap taken to EL2. Take advantage of the
infrastructure for translating CPTR_EL2 into the VHE (i.e. EL1) format
and base the trap decision solely on the VHE view of the register. The
in-memory value of CPTR_EL2 will always be up to date for the guest
hypervisor (more on that later), so just read it directly from memory.
Bury all of this behind a macro keyed off of the CPTR bitfield in
anticipation of supporting other traps (e.g. SVE).
[maz: account for HCR_EL2.E2H when testing for TFP/FPEN, with
all the hard work actually being done by Chase Conklin]
[ oliver: translate nVHE->VHE format for testing traps; macro for reuse
in other CPTR_EL2.xEN fields ]
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The compiler implements kCFI by adding type information (u32) above
every function that might be indirectly called and, whenever a function
pointer is called, injects a read-and-compare of that u32 against the
value corresponding to the expected type. In case of a mismatch, a BRK
instruction gets executed. When the hypervisor triggers such an
exception in nVHE, it panics and triggers and exception return to EL1.
Therefore, teach nvhe_hyp_panic_handler() to detect kCFI errors from the
ESR and report them. If necessary, remind the user that EL2 kCFI is not
affected by CONFIG_CFI_PERMISSIVE.
Pass $(CC_FLAGS_CFI) to the compiler when building the nVHE hyp code.
Use SYM_TYPED_FUNC_START() for __pkvm_init_switch_pgd, as nVHE can't
call it directly and must use a PA function pointer from C (because it
is part of the idmap page), which would trigger a kCFI failure if the
type ID wasn't present.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-9-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Given that the sole purpose of __hyp_call_panic() is to call panic(), a
__noreturn function, give it the __noreturn attribute, removing the need
for its caller to use unreachable().
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-6-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Ignore R_AARCH64_ABS32 relocations, instead of panicking, when emitting
the relocation table of the hypervisor. The toolchain might produce them
when generating function calls with kCFI to represent the 32-bit type ID
which can then be resolved across compilation units at link time. These
are NOT actual 32-bit addresses and are therefore not needed in the
final (runtime) relocation table (which is unlikely to use 32-bit
absolute addresses for arm64 anyway).
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-5-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The invalid_host_el2_vect macro is used by EL2{t,h} handlers in nVHE
*host* context, which should never run with a guest context loaded.
Therefore, remove the superfluous vCPU context check and branch
unconditionally to hyp_panic.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-4-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Fix the mismatch between the (incorrect) C signature, C call site, and
asm implementation by aligning all three on an API passing the
parameters (pgd and SP) separately, instead of as a bundled struct.
Remove the now unnecessary memory accesses while the MMU is off from the
asm, which simplifies the C caller (as it does not need to convert a VA
struct pointer to PA) and makes the code slightly more robust by
offsetting the struct fields from C and properly expressing the call to
the C compiler (e.g. type checker and kCFI).
Fixes: f320bc742bc2 ("KVM: arm64: Prepare the creation of s1 mappings at EL2")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-3-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When the hypervisor receives a SError or synchronous exception (EL2h)
while running with the __kvm_hyp_vector and if ELR_EL2 doesn't point to
an extable entry, it panics indirectly by overwriting ELR with the
address of a panic handler in order for the asm routine it returns to to
ERET into the handler.
However, this clobbers ELR_EL2 for the handler itself. As a result,
hyp_panic(), when retrieving what it believes to be the PC where the
exception happened, actually ends up reading the address of the panic
handler that called it! This results in an erroneous and confusing panic
message where the source of any synchronous exception (e.g. BUG() or
kCFI) appears to be __guest_exit_panic, making it hard to locate the
actual BRK instruction.
Therefore, store the original ELR_EL2 in the per-CPU kvm_hyp_ctxt and
point the sysreg to a routine that first restores it to its previous
value before running __guest_exit_panic.
Fixes: 7db21530479f ("KVM: arm64: Restore hyp when panicking in guest context")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-2-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Latest kid on the block: NXS (Non-eXtra-Slow) TLBI operations.
Let's add those in bulk (NSH, ISH, OSH, both normal and range)
as they directly map to their XS (the standard ones) counterparts.
Not a lot to say about them, they are basically useless.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-17-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We already support some form of range operation by handling FEAT_TTL,
but so far the "arbitrary" range operations are unsupported.
Let's fix that.
For EL2 S1, this is simple enough: we just map both NSH, ISH and OSH
instructions onto the ISH version for EL1.
For TLBI instructions affecting EL1 S1, we use the same model as
their non-range counterpart to invalidate in the context of the
correct VMID.
For TLBI instructions affecting S2, we interpret the data passed
by the guest to compute the range and use that to tear-down part
of the shadow S2 range and invalidate the TLBs.
Finally, we advertise FEAT_TLBIRANGE if the host supports it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-16-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Our handling of outer-shareable TLBIs is pretty basic: we just
map them to the existing inner-shareable ones, because we really
don't have anything else.
The only significant change is that we can now advertise FEAT_TLBIOS
support if the host supports it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Due to the way FEAT_NV2 suppresses traps when accessing EL2
system registers, we can't track when the guest changes its
HCR_EL2.TGE setting. This means we always trap EL1 TLBIs,
even if they don't affect any L2 guest.
Given that invalidating the EL2 TLBs doesn't require any messing
with the shadow stage-2 page-tables, we can simply emulate the
instructions early and return directly to the guest.
This is conditioned on the instruction being an EL1 one and
the guest's HCR_EL2.{E2H,TGE} being {1,1} (indicating that
the instruction targets the EL2 S1 TLBs), or the instruction
being one of the EL2 ones (which are not ambiguous).
EL1 TLBIs issued with HCR_EL2.{E2H,TGE}={1,0} are not handled
here, and cause a full exit so that they can be handled in
the context of a VMID.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Provide the primitives required to handle TLB invalidation for
Stage-1 EL2 TLBs, which by definition do not require messing
with the Stage-2 page tables.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Now that the layout of the structures is compatible with 1.1 it is time
to probe the 1.1 version of the FF-A protocol inside the hypervisor. If
the TEE doesn't support it, it should return the minimum supported
version.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-5-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The FF-A spec 1.2 reserves the following ranges for identifying FF-A
calls:
0x84000060-0x840000FF: FF-A 32-bit calls
0xC4000060-0xC40000FF: FF-A 64-bit calls.
Use the range identification according to the spec and allow calls that
are currently out of the range(eg. FFA_MSG_SEND_DIRECT_REQ2) to be
identified correctly.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-4-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Handle the FFA_PARTITION_INFO_GET host call inside the pKVM hypervisor
and copy the response message back to the host buffers.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-3-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The pKVM hypervisor initializes with FF-A version 1.0. The spec requires
that no other FF-A calls to be issued before the version negotiation
phase is complete. Split the hypervisor proxy initialization code in two
parts so that we can move the later one after the host negotiates its
version.
Without trapping the call, the host drivers can negotiate a higher
version number with TEE which can result in a different memory layout
described during the memory sharing calls.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-2-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
According to the FF-A spec (Buffer states and ownership), after a
producer has written into a buffer, it is "full" and now owned by the
consumer. The producer won't be able to use that buffer, until the
consumer hands it over with an invocation such as RX_RELEASE.
It is clear in the following paragraph (Transfer of buffer ownership),
that MEM_RETRIEVE_RESP is transferring the ownership from producer (in
our case SPM) to consumer (hypervisor). RX_RELEASE is therefore
mandatory here.
It is less clear though what is happening with MEM_FRAG_TX. But this
invocation, as a response to MEM_FRAG_RX writes into the same hypervisor
RX buffer (see paragraph "Transmission of transaction descriptor in
fragments"). Also this is matching the TF-A implementation where the RX
buffer is marked "full" during a MEM_FRAG_RX.
Release the RX hypervisor buffer in those two cases. This will unblock
later invocations using this buffer which would otherwise fail.
(RETRIEVE_REQ, MEM_FRAG_RX and PARTITION_INFO_GET).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240611175317.1220842-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM (and pKVM) do not support SME guests. Therefore KVM ensures
that the host's SME state is flushed and that SME controls for
enabling access to ZA storage and for streaming are disabled.
pKVM needs to protect against a buggy/malicious host. Ensure that
it wouldn't run a guest when protected mode is enabled should any
of the SME controls be enabled.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When setting/clearing CPACR bits for EL0 and EL1, use the ELx
format of the bits, which covers both. This makes the code
clearer, and reduces the chances of accidentally missing a bit.
No functional change intended.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we have introduced finalize_init_hyp_mode(), lets
consolidate the initializing of the host_data fpsimd_state and
sve state.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240603122852.3923848-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When running in protected mode we don't want to leak protected
guest state to the host, including whether a guest has used
fpsimd/sve. Therefore, eagerly restore the host state on guest
exit when running in protected mode, which happens only if the
guest has used fpsimd/sve.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Protected mode needs to maintain (save/restore) the host's sve
state, rather than relying on the host kernel to do that. This is
to avoid leaking information to the host about guests and the
type of operations they are performing.
As a first step towards that, allocate memory mapped at hyp, per
cpu, for the host sve state. The following patch will use this
memory to save/restore the host state.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In subsequent patches, n/vhe will diverge on saving the host
fpsimd/sve state when taking a guest fpsimd/sve trap. Add a
specialized helper to handle it.
No functional change intended.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The same traps controlled by CPTR_EL2 or CPACR_EL1 need to be
toggled in different parts of the code, but the exact bits and
their polarity differ between these two formats and the mode
(vhe/nvhe/hvhe).
To reduce the amount of duplicated code and the chance of getting
the wrong bit/polarity or missing a field, abstract the set/clear
of CPTR_EL2 bits behind a helper.
Since (h)VHE is the way of the future, use the CPACR_EL1 format,
which is a subset of the VHE CPTR_EL2, as a reference.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since the prototypes for __sve_save_state/__sve_restore_state at
hyp were added, the underlying macro has acquired a third
parameter for saving/restoring ffr.
Fix the prototypes to account for the third parameter, and
restore the ffr for the guest since it is saved.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240603122852.3923848-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that the hypervisor is handling the host sve state in
protected mode, it needs to be able to save it.
This reverts commit e66425fc9ba3 ("KVM: arm64: Remove unused
__sve_save_state").
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We recently upgraded the view of ESR_EL2 to 64bit, in keeping with
the requirements of the architecture.
However, the AArch32 emulation code was left unaudited, and the
(already dodgy) code that triages whether a trap is spurious or not
(because the condition code failed) broke in a subtle way:
If ESR_EL2.ISS2 is ever non-zero (unlikely, but hey, this is the ARM
architecture we're talking about), the hack that tests the top bits
of ESR_EL2.EC will break in an interesting way.
Instead, use kvm_vcpu_trap_get_class() to obtain the EC, and list
all the possible ECs that can fail a condition code check.
While we're at it, add SMC32 to the list, as it is explicitly listed
as being allowed to trap despite failing a condition code check (as
described in the HCR_EL2.TSC documentation).
Fixes: 0b12620fddb8 ("KVM: arm64: Treat ESR_EL2 as a 64-bit register")
Cc: stable@vger.kernel.org
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240524141956.1450304-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.
Remove redundant variables.
Note:
This commit changes the coverage for some objects:
- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV
I believe these are positive effects because all of them are kernel
space objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
|
|
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
* kvm-arm64/misc-6.10:
: .
: Misc fixes and updates targeting 6.10
:
: - Improve boot-time diagnostics when the sysreg tables
: are not correctly sorted
:
: - Allow FFA_MSG_SEND_DIRECT_REQ in the FFA proxy
:
: - Fix duplicate XNX field in the ID_AA64MMFR1_EL1
: writeable mask
:
: - Allocate PPIs and SGIs outside of the vcpu structure, allowing
: for smaller EL2 mapping and some flexibility in implementing
: more or less than 32 private IRQs.
:
: - Use bitmap_gather() instead of its open-coded equivalent
:
: - Make protected mode use hVHE if available
:
: - Purge stale mpidr_data if a vcpu is created after the MPIDR
: map has been created
: .
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: arm64: Convert kvm_mpidr_index() to bitmap_gather()
KVM: arm64: vgic: Allocate private interrupts on demand
KVM: arm64: Remove duplicated AA64MMFR1_EL1 XNX
KVM: arm64: Remove FFA_MSG_SEND_DIRECT_REQ from the denylist
KVM: arm64: Improve out-of-order sysreg table diagnostics
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-6.10: (25 commits)
: .
: At last, a bunch of pKVM patches, courtesy of Fuad Tabba.
: From the cover letter:
:
: "This series is a bit of a bombay-mix of patches we've been
: carrying. There's no one overarching theme, but they do improve
: the code by fixing existing bugs in pKVM, refactoring code to
: make it more readable and easier to re-use for pKVM, or adding
: functionality to the existing pKVM code upstream."
: .
KVM: arm64: Force injection of a data abort on NISV MMIO exit
KVM: arm64: Restrict supported capabilities for protected VMs
KVM: arm64: Refactor setting the return value in kvm_vm_ioctl_enable_cap()
KVM: arm64: Document the KVM/arm64-specific calls in hypercalls.rst
KVM: arm64: Rename firmware pseudo-register documentation file
KVM: arm64: Reformat/beautify PTP hypercall documentation
KVM: arm64: Clarify rationale for ZCR_EL1 value restored on guest exit
KVM: arm64: Introduce and use predicates that check for protected VMs
KVM: arm64: Add is_pkvm_initialized() helper
KVM: arm64: Simplify vgic-v3 hypercalls
KVM: arm64: Move setting the page as dirty out of the critical section
KVM: arm64: Change kvm_handle_mmio_return() return polarity
KVM: arm64: Fix comment for __pkvm_vcpu_init_traps()
KVM: arm64: Prevent kmemleak from accessing .hyp.data
KVM: arm64: Do not map the host fpsimd state to hyp in pKVM
KVM: arm64: Rename __tlb_switch_to_{guest,host}() in VHE
KVM: arm64: Support TLB invalidation in guest context
KVM: arm64: Avoid BBM when changing only s/w bits in Stage-2 PTE
KVM: arm64: Check for PTE validity when checking for executable/cacheable
KVM: arm64: Avoid BUG-ing from the host abort path
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-eret-pauth:
: .
: Add NV support for the ERETAA/ERETAB instructions. From the cover letter:
:
: "Although the current upstream NV support has *some* support for
: correctly emulating ERET, that support is only partial as it doesn't
: support the ERETAA and ERETAB variants.
:
: Supporting these instructions was cast aside for a long time as it
: involves implementing some form of PAuth emulation, something I wasn't
: overly keen on. But I have reached a point where enough of the
: infrastructure is there that it actually makes sense. So here it is!"
: .
KVM: arm64: nv: Work around lack of pauth support in old toolchains
KVM: arm64: Drop trapping of PAuth instructions/keys
KVM: arm64: nv: Advertise support for PAuth
KVM: arm64: nv: Handle ERETA[AB] instructions
KVM: arm64: nv: Add emulation for ERETAx instructions
KVM: arm64: nv: Add kvm_has_pauth() helper
KVM: arm64: nv: Reinject PAC exceptions caused by HCR_EL2.API==0
KVM: arm64: nv: Handle HCR_EL2.{API,APK} independently
KVM: arm64: nv: Honor HFGITR_EL2.ERET being set
KVM: arm64: nv: Fast-track 'InHost' exception returns
KVM: arm64: nv: Add trap forwarding for ERET and SMC
KVM: arm64: nv: Configure HCR_EL2 for FEAT_NV2
KVM: arm64: nv: Drop VCPU_HYP_CONTEXT flag
KVM: arm64: Constraint PAuth support to consistent implementations
KVM: arm64: Add helpers for ESR_ELx_ERET_ISS_ERET*
KVM: arm64: Harden __ctxt_sys_reg() against out-of-range values
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/host_data:
: .
: Rationalise the host-specific data to live as part of the per-CPU state.
:
: From the cover letter:
:
: "It appears that over the years, we have accumulated a lot of cruft in
: the kvm_vcpu_arch structure. Part of the gunk is data that is strictly
: host CPU specific, and this result in two main problems:
:
: - the structure itself is stupidly large, over 8kB. With the
: arch-agnostic kvm_vcpu, we're above 10kB, which is insane. This has
: some ripple effects, as we need physically contiguous allocation to
: be able to map it at EL2 for !VHE. There is more to it though, as
: some data structures, although per-vcpu, could be allocated
: separately.
:
: - We lose track of the life-cycle of this data, because we're
: guaranteed that it will be around forever and we start relying on
: wrong assumptions. This is becoming a maintenance burden.
:
: This series rectifies some of these things, starting with the two main
: offenders: debug and FP, a lot of which gets pushed out to the per-CPU
: host structure. Indeed, their lifetime really isn't that of the vcpu,
: but tied to the physical CPU the vpcu runs on.
:
: This results in a small reduction of the vcpu size, but mainly a much
: clearer understanding of the life-cycle of these structures."
: .
KVM: arm64: Move management of __hyp_running_vcpu to load/put on VHE
KVM: arm64: Exclude FP ownership from kvm_vcpu_arch
KVM: arm64: Exclude host_fpsimd_state pointer from kvm_vcpu_arch
KVM: arm64: Exclude mdcr_el2_host from kvm_vcpu_arch
KVM: arm64: Exclude host_debug_data from vcpu_arch
KVM: arm64: Add accessor for per-CPU state
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The per-CPU host context structure contains a __hyp_running_vcpu that
serves as a replacement for kvm_get_current_vcpu() in contexts where
we cannot make direct use of it (such as in the nVHE hypervisor).
Since there is a lot of common code between nVHE and VHE, the latter
also populates this field even if kvm_get_running_vcpu() always works.
We currently pretty inconsistent when populating __hyp_running_vcpu
to point to the currently running vcpu:
- on {n,h}VHE, we set __hyp_running_vcpu on entry to __kvm_vcpu_run
and clear it on exit.
- on VHE, we set __hyp_running_vcpu on entry to __kvm_vcpu_run_vhe
and never clear it, effectively leaving a dangling pointer...
VHE is obviously the odd one here. Although we could make it behave
just like nVHE, this wouldn't match the behaviour of KVM with VHE,
where the load phase is where most of the context-switch gets done.
So move all the __hyp_running_vcpu management to the VHE-specific
load/put phases, giving us a bit more sanity and matching the
behaviour of kvm_get_running_vcpu().
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502154030.3011995-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to determine whether or not a VM or vcpu are protected,
introduce helpers to query this state. While at it, use the vcpu
helper to check vcpus protected state instead of the kvm one.
Co-authored-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-19-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Consolidate the GICv3 VMCR accessor hypercalls into the APR save/restore
hypercalls so that all of the EL2 GICv3 state is covered by a single pair
of hypercalls.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-17-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix the comment to clarify that __pkvm_vcpu_init_traps()
initializes traps for all VMs in protected mode, and not only
for protected VMs.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-14-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Rename __tlb_switch_to_{guest,host}() to
{enter,exit}_vmid_context() in VHE code to maintain symmetry
between the nVHE and VHE TLB invalidations.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-11-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Typically, TLB invalidation of guest stage-2 mappings using nVHE is
performed by a hypercall originating from the host. For the invalidation
instruction to be effective, therefore, __tlb_switch_to_{guest,host}()
swizzle the active stage-2 context around the TLBI instruction.
With guest-to-host memory sharing and unsharing hypercalls
originating from the guest under pKVM, there is need to support
both guest and host VMID invalidations issued from guest context.
Replace the __tlb_switch_to_{guest,host}() functions with a more general
{enter,exit}_vmid_context() implementation which supports being invoked
from guest context and acts as a no-op if the target context matches the
running context.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Break-before-make (BBM) can be expensive, as transitioning via an
invalid mapping (i.e. the "break" step) requires the completion of TLB
invalidation and can also cause other agents to fault concurrently on
the invalid mapping.
Since BBM is not required when changing only the software bits of a PTE,
avoid the sequence in this case and just update the PTE directly.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Don't just assume that the PTE is valid when checking whether it
describes an executable or cacheable mapping.
This makes sure that we don't issue CMOs for invalid mappings.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Under certain circumstances __get_fault_info() may resolve the faulting
address using the AT instruction. Given that this is being done outside
of the host lock critical section, it is racy and the resolution via AT
may fail. We currently BUG() in this situation, which is obviously less
than ideal. Moving the address resolution to the critical section may
have a performance impact, so let's keep it where it is, but bail out
and return to the host to try a second time.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
On the guest teardown path, pKVM will zero the pages used to back
the guest data structures before returning them to the host as
they may contain secrets (e.g. in the vCPU registers). However,
the zeroing is done using a cacheable alias, and CMOs are
missing, hence giving the host a potential opportunity to read
the original content of the guest structs from memory.
Fix this by issuing CMOs after zeroing the pages.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To avoid direct comparison against the fp_owner enum, add a new
function that performs the check, host_owns_fp_regs(), to
complement the existing guest_owns_fp_regs().
To check for fpsimd state ownership, use the helpers instead of
directly using the enums.
No functional change intended.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
guest_owns_fp_regs() will be used to check fpsimd state ownership
across kvm/arm64. Therefore, move it to kvm_host.h to widen its
scope.
Moreover, the host state is not per-vcpu anymore, the vcpu
parameter isn't used, so remove it as well.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since the host_fpsimd_state has been removed from kvm_vcpu_arch,
it isn't pointing to the hyp's version of the host fp_regs in
protected mode.
Initialize the host_data fpsimd_state point to the host_data's
context fp_regs on pKVM initialization.
Fixes: 51e09b5572d6 ("KVM: arm64: Exclude host_fpsimd_state pointer from kvm_vcpu_arch")
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
