| Age | Commit message (Collapse) | Author |
|---|
|
Although we never supported 32bit anywhere in NV, we fail to
advertise so for EL0, probably owing to the relative lack of
hardware supporting both NV2 and 32bit EL0.
Add some sanitising to ID_AA64PFR0_EL1.EL0, and reaffirm that
"in 64bit-only we trust".
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we have introduced kvm_vcpu_has_feature(), use it in the
remaining code that checks for features in struct kvm, instead of
using the __vcpu_has_feature() helper.
No functional change intended.
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-18-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The vcpu flag GUEST_HAS_SVE is per-vcpu, but it is based on what
is now a per-vm feature. Make the flag per-vm.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-17-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The vcpu flag GUEST_HAS_PTRAUTH is always associated with the
vcpu PtrAuth features, which are defined per vm rather than per
vcpu.
Remove the flag, and replace it with checks for the features
instead.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-16-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similar to VHE, calculate the value of cptr_el2 from scratch on
activate traps. This removes the need to store cptr_el2 in every
vcpu structure. Moreover, some traps, such as whether the guest
owns the fp registers, need to be set on every vcpu run.
Reported-by: James Clark <james.clark@linaro.org>
Fixes: 5294afdbf45a ("KVM: arm64: Exclude FP ownership from kvm_vcpu_arch")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-13-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In hVHE mode, HCR_E2H should be set for both protected and
non-protected VMs. Since commit b56680de9c64 ("KVM: arm64:
Initialize trap register values in hyp in pKVM"), this has been
fixed, and the setting of the flag here is redundant.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-12-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The few remaining items needed in fixed_config.h are better
suited for pkvm.h. Move them there and delete it.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-11-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The existing code didn't properly distinguish between signed and
unsigned features, and was difficult to read and to maintain.
Rework it using the same method used in other parts of KVM when
handling vcpu features.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that the VM's feature id registers are initialized with the
values of the supported features, use those values to determine
which traps to set using kvm_has_feature().
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Trap RAS in pKVM if not supported at all for protected VMs. The
RAS version doesn't matter in this case.
Fixes: 2a0c343386ae ("KVM: arm64: Initialize trap registers for protected VMs")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hypervisor maintains the state of protected VMs. Initialize
the values for feature ID registers for protected VMs, to be used
when setting traps and when advertising features to protected
VMs.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Use KVM extension checks as the source for determining which
capabilities are allowed for protected VMs. KVM extension checks
is the natural place for this, since it is also the interface
exposed to users.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
features in pKVM
The hypervisor is responsible for the power state of protected
VMs in pKVM. Therefore, remove KVM_ARM_VCPU_POWER_OFF from the
list of allowed features for protected VMs.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
At the moment, checks for supported vcpu features for protected
VMs are build-time bugs. In the following patch, they will become
runtime checks based on the vcpu's features registers. Therefore,
consolidate them into one function that would return an error if
it encounters an unsupported feature.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Group setting protected VM traps by control register rather than
feature id register, since some trap values (e.g., PAuth), depend
on more than one feature id register.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The definitions for features allowed and allowed with
restrictions for protected guests, which are based on feature
registers, were defined and checked for separately, even though
they are handled in the same way. This could result in missing
checks for certain features, e.g., pointer authentication,
causing traps for allowed features.
Consolidate the definitions into one. Use that new definition to
construct the guest view of the feature registers for
consistency.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce the KVM_PGT_CALL() helper macro to allow switching from the
traditional pgtable code to the pKVM version easily in mmu.c. The cost
of this 'indirection' is expected to be very minimal due to
is_protected_kvm_enabled() being backed by a static key.
With this, everything is in place to allow the delegation of
non-protected guest stage-2 page-tables to pKVM, so let's stop using the
host's kvm_s2_mmu from EL2 and enjoy the ride.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-19-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a set of helper functions allowing to manipulate the pKVM
guest stage-2 page-tables from EL1 using pKVM's HVC interface.
Each helper has an exact one-to-one correspondance with the traditional
kvm_pgtable_stage2_*() functions from pgtable.c, with a strictly
matching prototype. This will ease plumbing later on in mmu.c.
These callbacks track the gfn->pfn mappings in a simple rb_tree indexed
by IPA in lieu of a page-table. This rb-tree is kept in sync with pKVM's
state and is protected by the mmu_lock like a traditional stage-2
page-table.
Signed-off-by: Quentin Perret <qperret@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-18-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a new hypercall to flush the TLBs of non-protected guests. The
host kernel will be responsible for issuing this hypercall after changing
stage-2 permissions using the __pkvm_host_relax_guest_perms() or
__pkvm_host_wrprotect_guest() paths. This is left under the host's
responsibility for performance reasons.
Note however that the TLB maintenance for all *unmap* operations still
remains entirely under the hypervisor's responsibility for security
reasons -- an unmapped page may be donated to another entity, so a stale
TLB entry could be used to leak private data.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-17-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Plumb the kvm_pgtable_stage2_mkyoung() callback into pKVM for
non-protected guests. It will be called later from the fault handling
path.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-16-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Plumb the kvm_stage2_test_clear_young() callback into pKVM for
non-protected guest. It will be later be called from MMU notifiers.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-15-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a new hypercall to remove the write permission from a
non-protected guest stage-2 mapping. This will be used for e.g. enabling
dirty logging.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-14-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a new hypercall allowing the host to relax the stage-2
permissions of mappings in a non-protected guest page-table. It will be
used later once we start allowing RO memslots and dirty logging.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-13-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for letting the host unmap pages from non-protected
guests, introduce a new hypercall implementing the host-unshare-guest
transition.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-12-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for handling guest stage-2 mappings at EL2, introduce a
new pKVM hypercall allowing to share pages with non-protected guests.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-11-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Rather than look-up the hyp vCPU on every run hypercall at EL2,
introduce a per-CPU 'loaded_hyp_vcpu' tracking variable which is updated
by a pair of load/put hypercalls called directly from
kvm_arch_vcpu_{load,put}() when pKVM is enabled.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-10-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for accessing pkvm_hyp_vm structures at EL2 in a context
where we can't always expect a vCPU to be loaded (e.g. MMU notifiers),
introduce get/put helpers to get temporary references to hyp VMs from
any context.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-9-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_pgtable_stage2_relax_perms currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM. To
allow for the re-use of that function, make the walk flags one of its
parameters.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-7-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_pgtable_stage2_mkyoung currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM.
To allow for the re-use of that function, make the walk flags one of
its parameters.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-6-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We currently store part of the page-tracking state in PTE software bits
for the host, guests and the hypervisor. This is sub-optimal when e.g.
sharing pages as this forces to break block mappings purely to support
this software tracking. This causes an unnecessarily fragmented stage-2
page-table for the host in particular when it shares pages with Secure,
which can lead to measurable regressions. Moreover, having this state
stored in the page-table forces us to do multiple costly walks on the
page transition path, hence causing overhead.
In order to work around these problems, move the host-side page-tracking
logic from SW bits in its stage-2 PTEs to the hypervisor's vmemmap.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-5-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We don't need 16 bits to store the hyp page order, and we'll need some
bits to store page ownership data soon, so let's reduce the order
member.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to prepare the way for storing page-tracking information in
pKVM's vmemmap, move the enum pkvm_page_state definition to
nvhe/memory.h.
No functional changes intended.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The 'concrete' (a.k.a non-meta) page states are currently encoded using
software bits in PTEs. For performance reasons, the abstract
pkvm_page_state enum uses the same bits to encode these states as that
makes conversions from and to PTEs easy.
In order to prepare the ground for moving the 'concrete' state storage
to the hyp vmemmap, re-arrange the enum to use bits 0 and 1 for this
purpose.
No functional changes intended.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Only yielding control of the debug registers for writes is a bit silly,
unless of course you're a fan of pointless traps. Give control of the
debug registers to the guest upon the first access, regardless of
direction.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-20-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There is a nauseating amount of boilerplate for accessing the
breakpoint and watchpoint registers. Fold everything together into a
single set of accessors and select the right storage based on the sysreg
encoding.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-19-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similar to other per-CPU profiling/debug features we handle, store the
number of breakpoints/watchpoints in kvm_host_data to avoid reading the
ID register 4 times on every guest entry/exit. And if you're in the
nested virt business that's quite a few avoidable exits to the L0
hypervisor.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-18-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Inject debug exceptions into vEL2 if MDCR_EL2.TDE is set.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-17-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM takes over the guest's software step state machine if the VMM is
debugging the guest, but it does the save/restore fiddling for every
guest entry.
Note that the only constraint on host usage of software step is that the
guest's configuration remains visible to userspace via the ONE_REG
ioctls. So, we can cut down on the amount of fiddling by doing this at
load/put instead.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-16-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Stealing MDSCR_EL1 in the guest's kvm_cpu_context for external debugging
is rather gross. Just add a field for this instead and let the context
switch code pick the correct one based on the debug owner.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-15-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM has picked up several hacks to cope with vcpu->arch.mdcr_el2 needing
to be prepared before vcpu_load(), which is when it gets programmed
into hardware on VHE.
Now that the flows for reprogramming MDCR_EL2 have been simplified, move
that computation to vcpu_load().
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-14-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM takes ownership of the debug regs if the guest enables the OS lock,
as it needs to use MDSCR_EL1 to mask debug exceptions. Just reload the
vCPU if the guest toggles the OS lock, relying on kvm_vcpu_load_debug()
to update the debug owner and get the right trap configuration in place.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-13-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Use the debug owner to determine if the debug regs are in use instead of
keeping around the DEBUG_DIRTY flag. Debug registers are now
saved/restored after the first trap, regardless of whether it was a read
or a write. This also shifts the point at which KVM becomes lazy to
vcpu_put() rather than the next exception taken from the guest.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-12-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Delete the remnants of debug_ptr now that debug registers are selected
based on the debug owner instead.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-11-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The debug tracepoints are a useless firehose of information that track
implementation detail rather than well-defined events. These are going
to be rather difficult to uphold now that the implementation is getting
redone, so throw them out instead of bending over backwards.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-10-oliver.upton@linux.dev
[maz: fixed compilation after trace-ectomy]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Select the set of debug registers to use based on the owner rather than
relying on debug_ptr. Besides the code cleanup, this allows us to
eliminate a couple instances kern_hyp_va() as well.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-9-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
No particular reason other than it isn't nice to look at.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-8-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for tossing the debug_ptr mess, introduce an enumeration
to track the ownership of the debug registers while in the guest. Update
the owner at vcpu_load() based on whether the host needs to steal the
guest's debug context or if breakpoints/watchpoints are actively in use.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-7-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Expecting the callee to know when MDCR_EL2 needs to be written to
hardware asking for trouble. Do the deed from kvm_arm_setup_mdcr_el2()
instead.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The SME/SVE state tracking flags have no business in the vCPU. Move them
to kvm_host_data.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-5-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add flags to kvm_host_data to track if SPE/TRBE is present +
programmable on a per-CPU basis. Set the flags up at init rather than
vcpu_load() as the programmability of these buffers is unlikely to
change.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
