summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2023-04-14ARM: dts: nomadik: Replace deprecated spi-gpio propertiesFabio Estevam
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml, 'gpio-mosi' and 'gpio-sck' are deprecated properties. Use the recommeded 'mosi-gpios' and 'sck-gpios' instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20230407162504.1683422-1-festevam@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230410220300.2431524-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'qcom-dts-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM32 DeviceTree updates for v6.4 stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need to pass this information on the kernel commandline. Ath10k is wired up to read calibration data from the "ART" partition. PCI I/O port ranges are fixed on IPQ4019 and IPQ8064. Supply clocks are defined for KPSS L2CC and ACC clock controllers. Supply clocks for the global clock controller are being specified on IPQ4019, MSM8974 and MSM8226. PCIe RC support is enabled on the SDX55 T55 development board, IPA is defined for the SDX55 and a number of cleanup patches are introduced. Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and MI01.6 boards. * tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits) dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3) dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd. ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible ARM: dts: qcom: sdx55-t55: Move "status" property down ARM: dts: qcom: sdx55-t55: Enable PCIe RC support ARM: dts: qcom: sdx55: List the property values vertically ARM: dts: qcom: sdx55: Add support for PCIe RC controller ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane} ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node ARM: dts: qcom: ipq8064: Fix the PCI I/O port range ARM: dts: qcom: ipq4019: Fix the PCI I/O port range ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges dt-bindings: arm: qcom: Add ipq9574 compatible ARM: dts: qcom: msm8974: add correct XO clock source to GCC node ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes ARM: dts: qcom: add missing clock configuration for kpss-acc-v1 ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes dt-bindings: qcom: add ipq5332 boards ... Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'renesas-dts-for-v6.4-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.4 (take two) - Add PWM support for the R-Car H1 and H2 SoCs, - Add slide switch and I2C support for the Marzen development board, - Add SCI (serial) and Camera support for the RZ/G2L SoC and the RZ/G2L SMARC EVK development board, - Add IOMMU support for the R-Car V4H SoC, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712 arm64: dts: renesas: r8a779g0: Add iommus to MMC node arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes arm64: dts: renesas: r8a779g0: Add IPMMU nodes arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay ARM: dts: r8a7790: Add PWM device nodes ARM: dts: r8a7790: Add TPU device node ARM: dts: marzen: Enable I2C support ARM: dts: marzen: Add slide switches ARM: dts: r8a7779: Add PWM support dt-bindings: clock: r8a7779: Add PWM module clock arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.4-rockchip-dts32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt MMC-aliases for rk3288-veyron devices and some dts node adaptions for yaml conversions recently merged into the drm tree. * tag 'v6.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: fix rk3288 dp node ARM: dts: rockchip: fix rk3288 lvds node ARM: dts: rockchip: fix rk3288 dsi node ARM: dts: rockchip: Add mmc aliases for rk3288-veyron devices Link: https://lore.kernel.org/r/9713202.NyiUUSuA9g@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'sunxi-dt-for-6.4-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - added D1 crypto node - enabled DVFS on OrangePi PC2 board - added GPIO line names on Nezha D1 board - added suniv USB nodes and enabled on licheepi-nano - new suniv boards: PopStick v1.1 and Lctech Pi - added Allwinner T113-s DTSI - added MangoPi MQ-R T113-s board variant - swapped DMA names for A23, A31, A33, D1, H3, H5, V3s * tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: add MangoPi MQ-R-T113 board dt-bindings: arm: sunxi: document MangoPi MQ-R board names ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi dts: add riscv include prefix link ARM: dts: suniv: Add Lctech Pi F1C200s devicetree ARM: dts: suniv: add device tree for PopStick v1.1 dt-binding: arm: sunxi: add two board compatible strings dt-bindings: vendor-prefixes: add Source Parts and Lctech names ARM: dts: suniv: licheepi-nano: enable USB ARM: dts: suniv: add USB-related device nodes riscv: dts: nezha-d1: add gpio-line-names arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS riscv: dts: allwinner: d1: Add crypto engine node Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14cpu: Mark panic_smp_self_stop() __noreturnJosh Poimboeuf
In preparation for improving objtool's handling of weak noreturn functions, mark panic_smp_self_stop() __noreturn. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/92d76ab5c8bf660f04fdcd3da1084519212de248.1681342859.git.jpoimboe@kernel.org
2023-04-14Merge tag 'imx-dt-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm32 device tree changes for 6.4: - New board device trees: Tolino Vison, chargebyte Tarragon, new revision of the IOTA board. - A couple of imx7d-remarkable2 update to enable cyttsp5 touch and BD71815 PMIC. - A series from Oleksij Rempel to configure Ethernet reference clock from device tree. - A series from Stefan Wahren to use label references for i.MX28 based boards. * tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits) ARM: dts: imx6ull: Add chargebyte Tarragon support ARM: dts: imx: Add devicetree for Tolino Vison ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board ARM: dts: imx6dl-yapp4: Remove unneeded status "okay" ARM: dts: imx6dl-yapp4: Move status to the end of property list ARM: dts: imx6dl-yapp4: Move phy reset into switch node ARM: dts: imx28-tx28: add SPDX-License-Identifier ARM: dts: imx28-ts4600: Convert to use label references ARM: dts: imx28-evk: Convert to use label references ARM: dts: imx28-duckbill-2: Include base board ARM: dts: imx28-duckbill: Convert to use label references ARM: dts: imx28-cfa10036: Convert to use label references ARM: dts: imx28-apx4devkit: Convert to use label references ARM: dts: imx28-m28/sps1: Convert to use label references ARM: dts: imx28-apf28: Convert to use label references ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815 ARM: dts: imx7d-remarkable2: Enable the cyttsp5 ARM: dts: imx6dl-yapp4: Use reset-gpios property name ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL ... Link: https://lore.kernel.org/r/20230408101928.280271-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'stm32-dt-for-v6.4-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.4, round 1 Highlights: ---------- - MPU: - STM32MP13: - Add FMC support. - Add QSPI support. - Add 8 UART instances nodes. - Enable UART on STM32MP135F-DK: -UART1/UART8 used on expansion connector. -UART2 used for BT. -UART4 used for console. - STMP32MP15: - Add STM32MP151 support ( documentation + machine). - Uart fixes (slew rate, aliases clean-up). - Fix GPU YAMl issue. * tag 'stm32-dt-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: stm32: add initial documentation for STM32MP151 ARM: dts: stm32: Add QSPI support on STM32MP13x SoC family ARM: dts: stm32: add FMC support on STM32MP13x SoC family ARM: dts: stm32: YAML validation fails for Argon Boards ARM: dts: stm32: YAML validation fails for Odyssey Boards ARM: dts: stm32: YAML validation fails for STM32MP15 ST Boards ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk ARM: dts: stm32: add pins for usart2/1/4/8 in stm32mp13-pinctrl ARM: dts: stm32: add uart nodes on stm32mp13 ARM: dts: stm32: clean uart aliases on stm32mp15xx-exx boards ARM: dts: stm32: clean uart aliases on stm32mp15xx-dkx boards ARM: dts: stm32: fix slew-rate of USART2 on stm32mp15xx-dkx ARM: stm32: add support for STM32MP151 ARM: dts: stm32: fix spi1 pin assignment on stm32mp15 ARM: dts: stm32: drop invalid simple-panel compatible on stm32mp157c-lxa ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15xx-osd32 SoM Link: https://lore.kernel.org/r/63987ed6-2813-15ff-e058-73312a730d61@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'tegra-for-6.4-arm-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree changes for v6.4-rc1 There are several fixes and cleanups here for some of the older Tegra consumer devices. * tag 'tegra-for-6.4-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra30: Use cpu* labels ARM: tegra30: peripherals: Add 266.5MHz nodes ARM: tegra: asus-tf101: Fix accelerometer mount matrix ARM: tegra: transformers: Bind RT5631 sound nodes ARM: tegra: transformers: Update WM8903 sound nodes Link: https://lore.kernel.org/r/20230406124804.970394-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'samsung-dt-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM changes for v6.4 1. Several cleanups and improvements as a result of dtbs_checks: align node names with bindings, drop incorrect properties, fix clock-names, add missing "ports" node. 2. Move DP and MIPI phys to PMU node (DTS with binding change). 3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was selected by the driver based on the MSHC alias) and add generic MMC aliases in each board. The aliases match known numbering in the schematics. * tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4 ARM: dts: exynos: add mmc aliases ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property ARM: dts: exynos: fix MCT compatible in Universal C210 ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250 ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420 ARM: dts: exynos: move MIPI phy to PMU node in Exynos4 ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250 ARM: dts: exynos: drop unused samsung,camclk-out property in Midas ARM: dts: s5pv210: correct MIPI CSIS clock name ARM: dts: exynos: correct whitespace in Midas ARM: dts: exynos: fix WM8960 clock name in Itop Elite ARM: dts: exynos: add ports to TC358764 bridge on Arndale ARM: dts: exynos: drop fake align STMPE properties in P4 Note ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14ARM: pxa: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'arm-soc/for-6.4/soc' of https://github.com/Broadcom/stblinux into ↵Arnd Bergmann
soc/arm This pull request contains ARM-based platform code changes for 6.4, please pull the following: - Rob makes use of the of_address_to_resource() helper instead of open coding it in the Kona SMC code. * tag 'arm-soc/for-6.4/soc' of https://github.com/Broadcom/stblinux: ARM: bcm: Use of_address_to_resource() Link: https://lore.kernel.org/r/20230410232606.1917803-4-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'renesas-arm-soc-for-v6.4-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/arm Renesas ARM SoC updates for v6.4 - Use of_cpu_node_to_id() to read CPU node 'reg'. * tag 'renesas-arm-soc-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: sh-mobile: Use of_cpu_node_to_id() to read CPU node 'reg' Link: https://lore.kernel.org/r/cover.1681113113.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-soc-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm i.MX SoC changes for 6.4: - A couple of changes from Oleksij Rempel which make it possible to configure Ethernet refclock from device tree. - Use common DT helpers to test DT property presence and read boolean properties. * tag 'imx-soc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Use of_property_read_bool() for boolean properties ARM: mxs: Use of_property_present() for testing DT property presence ARM: mach-imx: imx6ul: remove not optional ethernet refclock overwrite ARM: imx6q: skip ethernet refclock reconfiguration if enet_clk_ref is present Link: https://lore.kernel.org/r/20230408101928.280271-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'samsung-soc-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/arm Samsung mach/soc changes for v6.4 Cleanup of OF-related functions: use of_property_read_bool() for reading bool and of_address_to_resource() for mapping MMIO. * tag 'samsung-soc-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: EXYNOS: Use of_address_to_resource() ARM: exynos: Use of_property_read_bool() for boolean properties Link: https://lore.kernel.org/r/20230405080438.156805-3-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-defconfig-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig updates for 6.4: - Enable i.MX93 ADC driver in arm64 defconfig. - Enable BD71815 PMIC and TDA998X HDMI bridge driver in imx_v6_v7_defconfig. - Enable a few drivers support needed by Tarragon boards in imx_v6_v7_defconfig. - Build IMX_SDMA driver as module in imx_v4_v5_defconfig. * tag 'imx-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v4_v5_defconfig: Build CONFIG_IMX_SDMA as module ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_I2C_NXP_TDA998X arm64: defconfig: Enable i.MX93 ADC support ARM: imx_v6_v7_defconfig: Enable rohm,bd71815 Link: https://lore.kernel.org/r/20230408101928.280271-6-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14ARM: multi_v7_defconfig: Add OPTEE supportAlexandre Torgue
STM32MP13 platform relies on OPTEE to boot: Clocks and regulators are handled in the secure world by OPTEE and exported to the non secure world (LINUX) thanks to ARM SCMI protocol. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20230413072042.30657-1-alexandre.torgue@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14ARM: configs: Update U8500 defconfigLinus Walleij
Update the U8500 defconfig accordingly: - Add the NFC modules used by some U8500-based systems. - Switch out the now deleted UX500 crypto drivers to the STM32 drivers that we have augmented to work with UX500. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230405105439.1739575-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.3-rockchip-dtsfixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Lower sd card speeds for two boards to make them run more reliable, missing 32k clock definition for Anbric xx3 devices, missing cache-levels for rk3588, fixed rk3326-board display supplies and more dt-schema fixes. * tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: correct panel supplies on some rk3326 boards arm64: dts: rockchip: use just "port" in panel on RockPro64 arm64: dts: rockchip: use just "port" in panel on Pinebook Pro arm64: dts: rockchip: Remove non-existing pwm-delay-us property arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices arm64: dts: rockchip: add rk3588 cache level information arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro arm64: dts: rockchip: Lower sd speed on rk3566-soquartz ARM: dts: rockchip: fix a typo error for rk3288 spdif node arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-13ARM: cpuidle: Drop of_device.h includeRob Herring
Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just implicitly including other includes, and is no longer needed. Just drop including of_device.h as of.h is already included. Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-7-581e2605fe47@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-13ARM: sunxi: Drop of_device.h includeRob Herring
Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just implicitly including other includes, and is no longer needed. Just drop including of_device.h as of.h is already included. Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-6-581e2605fe47@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-13arm: simplify two-level sysctl registration for ctl_isa_varsLuis Chamberlain
There is no need to declare two tables to just create directories, this can be easily be done with a prefix path with register_sysctl(). Simplify this registration. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13ARM: dts: aspeed-g6: Add UDMA nodeChia-Wei Wang
Add the device tree node for the UART DMA (UDMA) controller. Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Link: https://lore.kernel.org/r/20230320081133.23655-6-chiawei_wang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-04-13ARM: dts: aspeed: greatlakes: add mctp deviceDelphine CC Chiu
Add mctp node on I2C bus Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Link: https://lore.kernel.org/r/20230329083235.24123-3-Delphine_CC_Chiu@Wiwynn.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-04-13ARM: dts: aspeed: greatlakes: Add gpio namesDelphine CC Chiu
Add GPIO names for SOC lines. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://lore.kernel.org/r/20230329083235.24123-2-Delphine_CC_Chiu@Wiwynn.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-04-13ARM: dts: aspeed: p10bmc: Change power supply infoLakshmi Yadlapati
Bonnell system supports new ACBEL FSG032 power supply on I2C addresses 5A and 5B. Update the device tree with new power supply information and device addresses. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230412052305.1369521-6-lakshmiy@us.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-04-12Merge branches 'misc' and 'fixes' into for-nextRussell King (Oracle)
2023-04-12ARM: 9294/2: vfp: Fix broken softirq handling with instrumentation enabledArd Biesheuvel
Commit 62b95a7b44d1 ("ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled") replaced the en/disable preemption calls inside the VFP state handling code with en/disabling of soft IRQs, which is necessary to allow kernel use of the VFP/SIMD unit when handling a soft IRQ. Unfortunately, when lockdep is enabled (or other instrumentation that enables TRACE_IRQFLAGS), the disable path implemented in asm fails to perform the lockdep and RCU related bookkeeping, resulting in spurious warnings and other badness. Set let's rework the VFP entry code a little bit so we can make the local_bh_disable() call from C, with all the instrumentations that happen to have been configured. Calling local_bh_enable() can be done from asm, as it is a simple wrapper around __local_bh_enable_ip(), which is always a callable function. Link: https://lore.kernel.org/all/ZBBYCSZUJOWBg1s8@localhost.localdomain/ Fixes: 62b95a7b44d1 ("ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-04-11ARM: 9293/1: vfp: Pass successful return address via register R3Ard Biesheuvel
In preparation for reimplementing the do_vfp()->vfp_support_entry() handover in C code, switch to using R3 to pass the 'success' return address, rather than R9, as it cannot be used for parameter passing. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-04-11ARM: 9292/1: vfp: Pass thread_info pointer to vfp_support_entryArd Biesheuvel
Instead of dereferencing thread_info in do_vfp, pass the thread_info pointer to vfp_support_entry via R1. That way, we only use a single caller save register, which makes it easier to convert do_vfp to C code in a subsequent patch. Note that, unlike the CPU number, which can change due to preemption, passing the thread_info pointer can safely be done with preemption enabled. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-04-11ARM: 9291/1: decompressor: simplify the path to the top vmlinuxMasahiro Yamada
With commit 8debed3efe3a ("kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux") applied, we no longer see the error message while building the ARM zImage, but we do not have a good reason to complicate the file path either. '$(obj)/../../../../vmlinux' is canonicalized to 'vmlinux'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-04-08ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230321215624.78383-6-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230321215624.78383-5-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230321215624.78383-4-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230321215624.78383-3-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08ARM: imx_v4_v5_defconfig: Build CONFIG_IMX_SDMA as moduleFabio Estevam
Build CONFIG_IMX_SDMA as a module to allow the SDMA firmware be retrieved after the rootfs is mounted. This change aligns with the one already done for imx_v6_v7_defconfig in commit 5a7374ec715d ("ARM: imx_v6_v7_defconfig: build imx sdma driver as module"). Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-07ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of nodeManivannan Sadhasivam
To align with rest of the devicetree files, let's move the "status" property to the end of the nodes. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331145915.11653-2-manivannan.sadhasivam@linaro.org
2023-04-07ARM: dts: qcom: sdx55: Move reset and wake gpios to board dtsManivannan Sadhasivam
The reset and wake properties in the PCIe EP node belong to the board dts as they can be customized per board design. So let's move them from SoC dtsi. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331145915.11653-1-manivannan.sadhasivam@linaro.org
2023-04-07ARM: dts: armada: Add missing phy-mode and fixed linksAndrew Lunn
The DSA framework has got more picky about always having a phy-mode for the CPU port. The Armada Ethernet supports RGMII, SGMII, 1000base-x and 2500Base-X. Set the switch phy-mode based on how the SoC Ethernet ports is been configured. For RGMII mode, have the switch add the delays. Additionally, the cpu label has never actually been used in the binding, so remove it. Lastly, add a fixed-link node indicating the expected speed/duplex of the link to the SoC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-04-07ARM: dts: orion5: Add missing phy-mode and fixed linksAndrew Lunn
The DSA framework has got more picky about always having a phy-mode for the CPU port. The Orion5x Ethernet is an RGMII port. Set the switch to impose the RGMII delays. Additionally, the cpu label has never actually been used in the binding, so remove it. Lastly, add a fixed-link node indicating the expected speed/duplex of the link to the SoC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-04-07ARM: dts: kirkwood: Add missing phy-mode and fixed linksAndrew Lunn
The DSA framework has got more picky about always having a phy-mode for the CPU port. The Kirkwood Ethernet is an RGMII port. Set the switch to impose the RGMII delays. Additionally, the cpu label has never actually been used in the binding, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-04-06ARM: dts: qcom: sdx65: move status properties to end of nodesAlex Elder
Move a few device tree "status" properties so that they are the last specified property, in "qcom-sdx65-mtp.dts" and "qcom-sdx65.dtsi". Note that properties must always be specified before sub-nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327195605.2854123-3-elder@linaro.org
2023-04-06ARM: dts: qcom: sdx65: add IPA informationAlex Elder
Add IPA-related nodes and definitions to "sdx65.dtsi". The SMP2P nodes (ipa_smp2p_out and ipa_smp2p_in) are already present. Enable IPA in "sdx65-mtp.dts"; this GSI firmware is loaded by Trust Zone on this platform. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327195605.2854123-2-elder@linaro.org
2023-04-06Merge tag 'imx-fixes-6.3-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.3, 2nd round: - Fix 'reg' address length for i.MX8MP LCDIF2 device. - A couple of changes from Fabio Estevam to fix DTC warnings caused unnecessary address/size cells. - Re-enable PCI driver support in imx_v6_v7_defconfig. - Fix PMIC clock source property for imx8mm-evk board. - A couple of fixes from Peng Fan to correct off-on delay property for i.MX8 Verdin boards. * tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells arm64: dts: imx8mp-verdin: correct off-on-delay arm64: dts: imx8mm-verdin: correct off-on-delay arm64: dts: imx8mm-evk: correct pmic clock source arm64: dts: imx8mp: fix address length for LCDIF2 Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-05mm, treewide: redefine MAX_ORDER sanelyKirill A. Shutemov
MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-06ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCIFabio Estevam
Since commit 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support") the i.MX6 PCI driver is no longer selected by default. The existing PCI_IMX6 was made a hidden option, selected by new options PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the endpoint mode), but there has been no corresponding update to imx_v6_v7_defconfig so the PCI_IMX6 ends up getting disabled. Switch imx_v6_v7_defconfig to PCI_IMX6_HOST to preserve the existing functionality. This is based on the same fix done in commit 0cd5780eb625 ("arm64: defconfig: Fix unintentional disablement of PCI on i.MX"). Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support") Reported-by: Mattias Barthel <mattiasbarthel@gmail.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-06ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral driversStefan Wahren
We need to enable some drivers in order to use the following peripherals of Tarragon: * QCA7000/7005 Powerline chip * One-Wire Master DS2484 with external thermal sensors * external 4 pin PWM fan * ST IIS328DQ I2C accelerometer Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-06ARM: dts: imx6ull: Add chargebyte Tarragon supportStefan Wahren
This adds the support for chargebyte Tarragon, which is an Electrical Vehicle Supply Equipment (EVSE) for AC charging stations (according to IEC 61851, ISO 15118). The Tarragon board is based on an i.MX6ULL SoC and is available in 4 variants (Master, Slave, SlaveXT, Micro), which provide more or less peripherals. Supported features: * 512 MB DDR RAM * eMMC * Debug UART * 100 Mbit Ethernet * USB 2.0 Host interface * Powerline communication (QCA700x) * 2x RS485 * Digital in- and outputs (12 V) * One-Wire master for external temp sensors * 2x relay outputs * 2x motor interfaces Link: https://chargebyte.com/products/charging-station-communication/charge-control-c Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-05Merge tag 'linux-can-next-for-6.4-20230404-2' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-04-04-2 The first patch is by Oliver Hartkopp and makes the maximum pdu size of the CAN ISOTP protocol configurable. The following 5 patches are by Dario Binacchi and add support for the bxCAN controller by ST. Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse warning. Peng Fan's patch adds an optional power-domains property to the flexcan device tree binding. Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the esd_usb driver. The last patch is by Oliver Hartkopp and converts the USB IDs of the kvaser_usb driver to hexadecimal values. * tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: kvaser_usb: convert USB IDs to hexadecimal values can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING dt-bindings: can: fsl,flexcan: add optional power-domains property can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init can: bxcan: add support for ST bxCAN controller ARM: dts: stm32: add pin map for CAN controller on stm32f4 ARM: dts: stm32: add CAN support on stm32f429 dt-bindings: net: can: add STM32 bxcan DT bindings dt-bindings: arm: stm32: add compatible for syscon gcan node can: isotp: add module parameter for maximum pdu size ==================== Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05Kconfig: introduce HAS_IOPORT option and select it as necessaryNiklas Schnelle
We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O Port access. In a future patch HAS_IOPORT=n will disable compilation of the I/O accessor functions inb()/outb() and friends on architectures which can not meaningfully support legacy I/O spaces such as s390. The following architectures do not select HAS_IOPORT: * ARC * C-SKY * Hexagon * Nios II * OpenRISC * s390 * User-Mode Linux * Xtensa All other architectures select HAS_IOPORT at least conditionally. The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs for HAS_IOPORT specific sections will be added in subsequent patches on a per subsystem basis. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-07-16 11:06:23 +0000